Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.     

Assessment of chemical properties and hydro-geochemical coefficients at the Qareh Sou Basin,Golestan Province,Iran

This paper focuses on the Qareh Sou Basin in Golestan Province, Iran. Golestan Province is the third largest cereal producer in Iran and water scarcity and salinity are major problems in this area. This study attempts to facilitate the comprehension of system behavior with respect to water quality issues and hydro-geochemical coefficients within the Qareh Sou Basin. This study was carried out during the year 2010. Various parameters, such as pH, EC, chloride, sulfate, bicarbonate, sodium, potassium, calcium and magnesium have been determined for evaluation purposes. Then, Ca/Mg, Na/Cl, Mg/(Ca + Mg), Ca/HCO₃, (Ca + Mg)–(HCO₃ + SO₄), (Na + K)–Cl, (Ca + Mg + Na + K)–Cl, HCO₃ + SO₄, Ca + Mg and chloro-alkaline indices (CAI) were calculated. Results show that cation exchange probably is an important factor in the hydrochemistry and silicate mineral weathering. Also, CAI-1 plot against CAI-2 demonstrates that most of samples have positive values which suggest normal ion exchange in the system. The carbonic acid is the main agent of calcite, limestone and dolomite weathering which occurs in some stations. According to Chadha’s diagram, the type of water is determined as Ca–Mg–HCO₃.     

Mineral potential mapping for rare earth elements mineralization with AHP method in the Kerman-Kashmar Tectonic Zone,Central Iran

One of the major strengths of a GIS is the ability to integrate and combine multiple layers of geoscience data for producing mineral potential maps showing favorable areas for mineral exploration. Once the data is prepared properly, the GIS, jointly with other statistical and geostatistical software packages, can be used to manipulate and visualize the data in order to produce a mineral prospectivity map. Many spatial modeling techniques can be employed to produce mineral potential maps. This paper demonstrates a technique to define favorable areas for REE mineralization with AHP technique using geological, geochemical, geophysical, alteration and faults density spatial data in the Kerman-Kashmar Tectonic Zone of central Iran. The AHP is a powerful and flexible multi-criteria decision-making tool for dealing with complex problems where both qualitative and quantitative aspects need to be considered. This approach is knowledgedriven method and can be applied in other areas for conventional use in mineral exploration.     

Hydrothermal fluid geochemistry at the Chah-Firuzeh porphyry copper deposit,Iran: Evidence from fluid inclusions

The Chah-Firuzeh porphyry copper deposit is located in 35 km north of Shahre Babak (Kerman province). It is associated with granodioriteic intrusive of Miocene age which intruded Eocene volcanosedimentary rocks. Copper mineralization was accompanied by both potassic and phyllic alteration. Field observations and petrographic studies demonstrate that the emplacement of Chah-Firuzeh pluton took place in several intrusive pulses, each with associated hydrothermal ore fluid formation that was also associated with hydrostatic pressure increasing respect to that of lithostatic pressure (and fracturing development-relative boiling) by circulated fluid. Copper is concentrated as a very early hydrothermal mineralized phase in the evolution of the hydrothermal system. Early hydrothermal alteration produced a potassic assemblage (orthoclase–biotite) in the central deep part of the stock. Alteration ore fluids could be classify into two groups of liquid-reach, containing solid phases, high temperature (390 to 500 °C) high salinity (more than 60 wt.% NaCl equiv.) and gas-rich, high temperature (311 to 570 °C), no solid phase and with low salinities. These magmatic source fluids illustrate sever boiling process and also are the responsible for the both potassic alteration, quartz group I and II veins and chalcopyrite deposition. Propylitic alteration occurred by the liquid-rich, low temperature (241 to 390 °C) and Ca-rich fluid with meteoric origin. Continuous decreasing temperature let the meteoric water diffusion into the system, mixed with magmatic fluids and descending the salinities down to the 1 wt.% NaCl equiv. and leaching the Cu from vein groups II and III by sever thermodynamic anarchies from potassic to the phyllic alteration zones. Phyllic alteration and copper leaching resulted from the inflow of oxidized and acidic meteoric waters with decreasing temperature of the system followed by the incursion of this fluid into and its convection in upper part of the system. A late episode of boiling occurred in the apical the phyllic zone, and was associated with significant copper deposition. Based on the field observation on sharp alteration and related mineralization, it is possible to conclude that all these procedures have been controlled by local faults that could be active even before the pluton injection. These faults and the new form ones (which have been formed after injection), could crash the hosted rocks, and act as physical dams to restrict and limit the mineralization in special strikes and zones within the Cah-Firuzeh ore deposit.     

A Simulated Annealing-Based Algorithm to Locate Additional Drillholes for Maximizing the Realistic Value of Information

Locating additional drillholes based on information gathered from the initial drilling is a very difficult decision-making step in the process of detailed explorations. The most appropriate locations for additional drillholes are those wherein the information gathered from drilling has more value compared to that from other locations. From among the common methods proposed in information systems for measuring the information value, use of the “realistic value” is a very practical one. The realistic value of information is derived from measuring the differences in the decision makers’ performances when provided with different information sets. On this basis, a mathematical model has been proposed in this paper for optimal location of additional drillholes where the information gathered from drillholes has the highest possible value. Due to the combinatorial nature of this model, use has been made of a simulated annealing-based algorithm for its solution. The proposed model has been applied in Sungun copper deposit for locating additional drillholes; results have revealed that the model is valid.     

Geochemical and quality assessment of groundwater of Marand Basin, East Azarbaijan Province, northwestern Iran

The chemical analysis of 83 water wells in the Marand area, Azarbaijan Province NW of Iran was evaluated to determine the hydrogeochemical processes and ion concentration background in the region. Over the entire area, the dominated hydrochemical types are Ca? +?Mg?+?SO₄?+?Cl, Ca?+?SO₄, Na?+?Cl and Ca?+?Mg?+?HCO₃. Based on the total hardness, the softness of the groundwater is determined. According to electrical conductivity (EC) and sodium adsorption ratio (SAR), the most dominant classes are C3?CS1, C3?CS2, C4?CS2 and C2?CS1. The major ion concentrations are below the acceptable level for drinking water. The groundwater salinity hazard is medium to high, but the Na hazard is low to medium; with regard to irrigation water, the quality is low to medium. So, a drainage system is necessary to avoid the increase of toxic salt concentrations.     

Determination of Realistic and Statistical Value of the Information Gathered from Exploratory Drilling

Unlike other branches of geosciences, exploratory drilling has not been investigated within the framework of an information system; so, the expression “value of exploratory drilling information” (despite its common usage) is vague. This article presents a model for the evaluation of value of the information gathered from exploratory drilling after studying different mineral exploration and exploratory drilling systems within the framework of an “information system.” Although this model does not present the economic value of information, it is a suitable tool for comparing different drilling patterns. The model was verified on the basis of drilling data for the Gol-Gohar XIIA anomaly.     

Combining AHP with GIS for Predictive Cu Porphyry Potential Mapping: A Case Study in Ahar Area (NW,Iran)

Using the analytic hierarchy process (AHP) method for multi-index evaluation has special advantages, while the use of geographic information systems (GIS) is suitable for spatial analysis. Combining AHP with GIS provides an effective approach for studies of mineral potential mapping evaluation. Selection of potential areas for exploration is a complex process in which many diverse criteria are to be considered. In this article, AHP and GIS are used for providing potential maps for Cu porphyry mineralization on the basis of criteria derived from geologic, geochemical, and geophysical, and remote sensing data including alteration and faults. Each criterion was evaluated with the aid of AHP and the result mapped by GIS. This approach allows the use of a mixture of quantitative and qualitative information for decision-making. The results of application in this article provide acceptable outcomes for copper porphyry exploration.     

An SVM-based machine learning method for the separation of alteration zones in Sungun porphyry copper deposit

Sungun porphyry copper deposit is in East Azarbaijan province, NW of Iran. There exist four hypogene alteration types in Sungun: potassic, propylitic, potassic–phyllic, and phyllic. Copper mineralization is essentially associated more with the potassic and less with the phyllic alterations and their separation is, therefore, quite important. This research has tried to separate these two alteration zones in Sungun porphyry copper deposit using the Support Vector Machine (SVM) method based on the fluid inclusion data, and seven variables including homogenization temperatures, salinity, pressure, depth, density and the Cu grade have been measured and calculated for each separate sample. To apply this method, use is made of the radial basis function (RBF) as the kernel function. The best values for λ and C (the most important SVM parameters) that perform well in the training and test data are 0.0001 and 1, respectively. If these values for λ and C are applied, the phyllic and potassic alteration zones in the training and test data will be separated with an accuracy of about 95% and 100%, respectively. This method can help geochemists in separating the alteration zones because classifying and separating samples microscopically is not only very hard, but also quite time and money consuming.     

Factors controlling copper solubility and chalcopyrite deposition in the Sungun porphyry copper deposit, Iran

The Sungun porphyry copper deposit is hosted in a Diorite/granodioritic to quartz-monzonitic stock that intruded Eocene volcanosedimentary and Cretaceous carbonate rocks. Copper mineralization is associated mainly with potassic alteration and to a lesser extent with sericitic alteration. Based on previously published fluid inclusion and isotopic data by Hezarkhani and Williams-Jones most of the copper is interpreted to have deposited during the waning stages of orthomagmatic hydrothermal activity at temperatures of 400 to 300 °C. These data also indicate that the hydrothermal system involved meteoric waters, and boiled extensively. In this work, thermodynamic data are used to delineate the stability fields of alteration and ore assemblages as a function of fS₂, fO₂ and pH. The solubility of chalcopyrite was evaluated in this range of conditions using recently published experimental data. During early potassic alteration (>450 °C), Copper solubility is calculated to have been >50 000 ppm, whereas the copper content of the initial fluid responsible for ore deposition is estimated, from fluid inclusion data, to have been 1200–3800 ppm. This indicates that initially the fluid was highly undersaturated with respect to chalcopyrite, which agrees with the observation that veins formed at T > 400 °C contain molybdenite but rarely chalcopyrite. Copper solubility drops rapidly with decreasing temperature, and at 400 °C is approximately 1000 ppm, within the range estimated from fluid inclusion data, whereas at 350 °C it is only 25 ppm. These calculations are consistent with observations that the bulk of the chalcopyrite deposited at Sungun is hosted by veins formed at temperatures of 360 ± 60 °C. Other factors that, in principle, may reduce chalcopyrite solubility are increases in pH, and decreases in fO₂ and aCl⁻. Our analysis shows, however, that most of the change in pH occurred at high temperature when chalcopyrite was grossly undersaturated in the fluid, and that the direction of change in fO₂ increased chalcopyrite solubility. We propose that the Sungun deposit formed mainly in response to the sharp temperature decrease that accompanied boiling, and partly as a result of the additional heat loss and decrease in aCl⁻, which occurred as a result of mixing of acidic Cu-bearing magmatic waters with cooler meteoric waters of lower salinity. Received: 8 July 1998 / Accepted: 8 April 1999