An experimental study on non-linear progressive wave-induced dynamic stresses in seabed

In this study, the dynamic stresses within the seabed induced by non-linear progressive waves were explored through a series of hydraulic model tests on a movable bed within a wave flume. By comparing Stokes’ 2nd-order wave theory with the theory of wave-induced dynamic stresses within the seabed as proposed by Yamamoto et al. [1978. On the response of a poro-elastic bed to water waves. Journal of Fluid Mechanics 87 (1), 193–206.] and Hsu and Jeng [1994. Wane-induced soil response in an unsaturated anisotropic seabed of finite thickness. International Journal for Numerical and Analytical Methods in Geomechanics 18, 785–807], the experimental results show that the pressure on the seabed surface, the pore water pressure within the seabed as well as the vertical and the horizontal stresses are all smaller than their theoretical values. If we were to obtain the characteristics of seabed soil, the analytical solution of Hsu and Jeng [1994. Wane-induced soil response in an unsaturated anisotropic seabed of finite thickness. International Journal for Numerical and Analytical Methods in Geomechanics 18, 785–807] might agree to the simulation of the wave-induced effective stresses and shear stress in the sandy seabed. A different phase shift exists among all the three soil stresses. Their influences on the three dynamic stresses within seabed soil are important for seabed stability, and can be used in the verification of numerical models. In the whole, the non-linear progressive waves and the naturally deposited seabed are found to have a strong interaction, and the behavior of the induced dynamic stresses within the seabed is very complicated, and should be investigated integrally.     

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…     

A Study on the Spectral Form of Nearshore Water Waves

- The spectral form of wind waves is investigated based on the ocean wave data observed at three nearshore stations of Taiwan. In this study, the generalized forms of Pierson-Moskowitz spectrum and JONSWAP spectrum are used to describe the local wave spectrum by selecting suitable spectral form parameters. It is shown that, at a specific site, the similarity of wave spectral form exists. Thus it is possible to use a representative spectral form for a given nearshore region to describe the wave spectrum at this nearshore. On the other hand, the effects of relative water depth on spectral form are examined. The feasibility of two spectral models in finite water depth is evaluated by using the same field wave data.     

Seismic structural control using an electric servomotor active mass driver system

This study investigates an electric‐type active mass driver (AMD) system for structural vibration control. Composed primarily of an electric servomotor and a ball screw, the electrical AMD system is free from noise problems, oil leakage, and labor‐intensive maintenance that commonly are associated with hydraulic AMD systems. The desired stroke amplification of the mass and the power demand of the servomotor can be adjusted via the ball screw pitch, which in turn affects the effectiveness and efficiency of the system. Meanwhile, an instantaneous optimal direct output feedback control algorithm is adopted. Numerical simulation is performed using a five‐story steel frame as the object structure under the conditions of the 1940 El Centro earthquake. The AMD system proves to be effective and efficient within a certain range of the ball screw pitch. The reductions of the peak responses can reach as high as 70% if properly designed. Requiring only the velocity measurement of the top floor for on‐line feedback control, the proposed control algorithm is recommended for practical implementation. Copyright © 2004 John Wiley & Sons, Ltd.     

A space-based decametric wavelength radio telescope concept

This paper reports a design study for a space-based decametric wavelength telescope. While not a new concept, this design study focused on many of the operational aspects that would be required for an actual mission. This design optimized the number of spacecraft to insure good visibility of approx. 80% of the radio galaxies– the primary science target for the mission. A 5,000 km lunar orbit was selected to guarantee minimal gravitational perturbations from Earth and lower radio interference. Optimal schemes for data downlink, spacecraft ranging, and power consumption were identified. An optimal mission duration of 1 year was chosen based on science goals, payload complexity, and other factors. Finally, preliminary simulations showing image reconstruction were conducted to confirm viability of the mission. This work is intended to show the viability and science benefits of conducting multi-spacecraft networked radio astronomy missions in the next few years.     

An evaluation of conditioning data for solute transport prediction

The large and diverse body of subsurface characterization data generated at a field research site near Oyster, Virginia, provides a unique opportunity to test the impact of conditioning data of various types on predictions of flow and transport. Bromide breakthrough curves (BTCs) were measured during a forced-gradient local-scale injection experiment conducted in 1999. Observed BTCs are available at 140 sampling points in a three-dimensional array within the transport domain. A detailed three-dimensional numerical model is used to simulate breakthrough curves at the same locations as the observed BTCs under varying assumptions regarding the character of hydraulic conductivity spatial distributions, and variable amounts and types of conditioning data. We present comparative results of six cases ranging from simple (deterministic homogeneous models) to complex (stochastic indicator simulation conditioned to cross-borehole geophysical observations). Quantitative measures of model goodness-of-fit are presented. The results show that conditioning to a large number of small-scale measurements does not significantly improve model predictions, and may lead to biased or overly confident predictions. However, conditioning to geophysical interpretations with larger spatial support significantly improves the accuracy and precision of model predictions. In all cases, the effects of model error appear to be significant in relation to parameter uncertainty.     

The interaction between a manmade lake and groundwater: an example site in the Aurku area,Chiayi County,Taiwan

The objectives of this study are (1) to understand the subsurface hydrology in the Aurku area, Chiayi County, southern Taiwan, and (2) to determine the interaction between the manmade lake and groundwater level through the recharge produced by infiltration by on‐site investigation and laboratory sand tank simulation. The manmade lake was selected as the field site for groundwater recharge effect so as to assess the role of infiltration from the aquaculture ponds in this area. These results can be used as reference for future application of constructing a series of manmade lakes. The field experiment was performed to measure the infiltration rate of the manmade lake by using the water balance method and double‐ring infiltration test. The results demonstrated that the manmade lake had helped the recharge of the groundwater. Raising or maintaining a higher water level of the manmade lake can promote higher infiltration. When the groundwater level is equal to or higher than the bottom of the manmade lake, infiltration will slow or cease. The field experiment and laboratory sand tank simulation demonstrated that the infiltration rate increased with the higher storage depth of the manmade lake. The laboratory simulation also indicated that while the groundwater level was lower than the bottom of manmade lake (i.e. the reference level) and the initial water depth (3 cm) was equal to or greater than 50% of the full water storage depth, the infiltration depth increased with time. However, the infiltration depth would be very small or nearly zero when the groundwater level was higher than the bottom of the manmade lake. Copyright © 2006 John Wiley & Sons, Ltd.