Structures and microstructures related to steady-state mantle flow in the Neyriz ophiolite, Iran

Structural analysis in the well-exposed and well-preserved Neyriz ophiolite suggests that it is a relatively undisturbed piece of oceanic lithosphere. Detailed structural mapping of high-T deformation mantle flow revealed the presence of three elliptical shaped diapirs trending NW–SE. These diapirs are characterized by vertical mantle foliations associated with vertical plunging stretching lineations, which progressively incline toward parallelism with the gently NE-dipping Moho. The NW–SE direction of asthenospheric upwelling of diapirs is parallel with the orientations of the vertical sheeted dike complex. This suggests that the Neyriz ophiolite was created by two NW–SE palaeo-ridge axes. These palaeo-ridges are classified as fast-spreading ridges. These ridges are segmented by a dextral palaeo-transform fracture zone. This is consistent with fast-spreading ridges. Comparison between the Neyriz and Oman ophiolites reveals that they show similar characteristics. Most of the Oman palaeo-ridge systems are oriented NW–SE and NNW–SE. They also display similar sheeted dike complex orientations and crustal thickness variations. These two ophiolites originally were part of the Neo-Tethyan oceanic lithosphere and afterwards were separated by the Oman line during continental collision of the Iranian micro-continent and Afro-Arabian continent.     

广东清远早、晚稻稻田甲烷排放的观测研究

分析了2003、2004年广东省清远市郊区早、晚稻稻田甲烷（CH4）的排放通量，结果表明：广东清远早、晚稻稻田CH4排放通量的几何平均值2003年为4，38mg·m^-2·h^-1和6．09mg·m^-2·h^-1；2004年为5．17mg·m^-2·h^-1和8．3mg·m^-2·h^-1，土壤有机质含量是造成2003和2004年CH4排放差异的原因之一。水稻品种的不同，CH4排放通量也有所不同，实验表明，水稻品种“七丝尖”的排放通量比品种“金优99”高1．08mg·m^-2·h^-1，产量却只有64％。此外，与相关的测量结果进行初步比较。     

The catastrophic cyclone of April 1991: Its Impact on the economy of Bangladesh

A very severe cyclonic storm with wind speeds of over 240 km/h struck the coastal areas of Bangladesh in the full moon night of 29 April 1991. The path of the eye, close to the shore, raised a storm surge of unusual height, reportedly more than 9 m above the mean sea level, which devastated the offshore islands and the mainland coast. The damage to the physical infrastructure of the port of Chittagong and adjoining industrial area has been colossal, and recovery will take years. Death tolls from the cyclone, storm surge and its aftermath exceeded 145 000 making it one of the world's major natural disasters of this century.This paper is concerned with examining the magnitude and intensity of the disaster. It analyses how the people of Bangladesh, and the environment in which they live, were affected by the cyclone. A brief account is presented of loss of life and of the damage suffered in various sectors, including agriculture, industry, and physical infrastructure.The paper lays emphasis on the need of building a sufficient number of multipurpose cyclone shelters in the disaster-prone coastal areas of Bangladesh. Adequate measures should be taken for evacuating people from vulnerable areas and putting them into these shelters in the event of a cyclonic storm. Simplification of the current cyclone warning system is recommended.The difficulties of providing relief to the survivors are discussed. And finally, the need for improvement of the communication infrastructure in the coastal areas is highlighted.     

Methane,carbon monoxide and methylchloroform in the southern hemisphere

New observational data on CH₄, CO and CH₃CCl₃ in the southern hemisphere are reported. The data are analysed for long term trends and seasonal cycles. CH₃CCl₃ data are used to scale the OH fields incorporated in a two dimensional model, which in turn, is used to constrain the magnitude of a global CH₄ source function. The possible causes of observed seasonality of CH₃CCl₃, CH₄ and CO are identified, and several other aspects of observed CH₄ variability are discussed.Possible future research directions are also given.     

The structural inventory of a small complex impact crater: Jebel Waqf as Suwwan,Jordan

The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.     

Evaluation of the crustal deformations in the northern region of Lake Nasser (Egypt) derived from 8 years of GPS campaign observations

The proper evaluation of crustal deformations in the Aswan (Egypt) region is crucial due to the existence of one major artificial structure: the Aswan High Dam. This construction induced the creation of one of the major artificial lakes: Lake Nasser, which has a surface area of about 5200 km² with a maximum capacity of 165 km³. The lake is nearly 550 km long (more than 350 km within Egypt and the remainder in Sudan) and 35 km across at its widest point. Great attention has focused on this area after the November 14, 1981 earthquake (M_L = 5.7), with its epicenter southwest of the High Dam.In order to evaluate the present-day kinematics of the region, its relationship with increasing seismicity, and the possible influence of the Aswan High Dam operation, a network of 11 GPS sites was deployed in the area. This network has been reobserved every year since 2000 in campaign style. We present here the results of the analysis of the GPS campaign time-series. These time-series are already long enough to derive robust solutions for the motions of these stations. The computed trends are analyzed within the framework of the geophysical and geological settings of this region. We show that the observed displacements are significant, pointing to a coherent intraplate extensional deformation pattern, where some of the major faults (e.g., dextral strike-slip Kalabsha fault and normal Dabud fault) correspond to gradients of the surface deformation field. We also discuss the possible influence of the water load on the long-term deformation pattern.     

Active crustal shortening in NE Syria revealed by deformed terraces of the River Euphrates

The Africa–Arabia plate boundary comprises the Red Sea oceanic spreading centre and the left‐lateral Dead Sea Fault Zone (DSFZ); however, previous work has indicated kinematic inconsistency between its continental and oceanic parts. The Palmyra Fold Belt (PFB) splays ENE from the DSFZ in SW Syria and persists for ～400 km to the River Euphrates, but its significance within the regional pattern of active crustal deformation has hitherto been unclear. We report deformation of Euphrates terraces consistent with Quaternary right‐lateral transpression within the PFB, indicating anticlockwise rotation (estimated as 0.3° Ma^?1 about 36.0°N 39.8°E) of the block between the PFB and the northern DSFZ relative to the Arabian Plate interior. The northern DSFZ is shown to be kinematically consistent with the combination of Euler vectors for the PFB and the Red Sea spreading, resolving the inconsistency previously evident. The SW PFB causes a significant earthquake hazard, previously unrecognized, to the city of Damascus.     

A review on mechanism and future perspectives of cadmium-resistant bacteria

Since the last few decades, cadmium anthropocentric sources have been increased drastically. Various chemical and physical approaches for cadmium remediation have been proposed, but these techniques are quite expensive, not healthy for the environment and not efficient at the low concentration of cadmium. Thus, in the last few years, the cadmium removal by biological approaches has received a great interest. Many bacteria can resist against high concentration of cadmium through different mechanisms. The cadmium-resistant bacteria can be grouped into three levels. The main group consists of bacteria which efflux the cadmium from the cells. The bacteria of the other two groups are capable of detoxifying or binding cadmium. The cadA and cadB gene systems are involved in efflux mechanism, and these encode different efflux pump proteins, while the functional groups such as amine, carboxyl, phosphate and hydroxyl facilitate cadmium binding to bacterial surface such as chemisorption. Many enzymes are involved in the detoxifying the cadmium and make the membrane impermeable against cadmium. This paper also reviews the industrial application of cadmium-resistant bacteria and the future perspectives of genetic engineering, bioelectrochemical system, microbial aggregates and biosorption of cadmium by algae.     

Integrated application of 2D resistivity and electromagnetic methods to investigate a metallic-sulfide deposit in Soap Gulch,Montana. A case study

Geoelectrical methods involving electrical resistivity tomography (ERT), self-potential (SP), frequency domain electromagnetic (FDEM), and very low frequency (VLF) methods have been used to provide valuable information in locating a known sulfide ore body in Soap Gulch, Montana. The study develops basis of comparison for the geophysical techniques employed. Ranges of resistivity along the area have been established using interpreted ERT which can help to understand the subsurface distribution of sulfides in the area. A sulfide body was delineated from the survey area corresponding to anomalously low resistivity values on the ERT section, negative SP, and high apparent current density zone in VLF. Depth to the localized ore zone ranges approximately from 10 to 20 m. FDEM data reflect the conductivity distribution of the shallow subsurface (less than 6 m deep); hence, the delineated sulfide zone had minimal contribution to FDEM measurements. The results of the study show that SP, VLF, and ERT methods provide significant information in localizing ore bodies. The survey revealed that the resistivity values obtained from ERT profile corroborate the FDEM, SP, and VLF from the area.