Real surface conductivity component as indicator for the hydraulic conductivity

Estimation of hydraulic conductivity from surface resistivity measurements is one of the most difficult and challenging hydrogeophysical targets. The promising side of this relation is the analogy between electric current flow and water flow, whereas the grand ambiguity is the non-dimensionality between both two quantities. Imaginary surface conductivity component is used recently to deduce the hydraulic conductivity via complex resistivity measurements. Since there are similar properties between imaginary (out-of-phase) and real (in-phase) surface conductivity components, the latter is used in this paper to predict the hydraulic conductivity. Two mathematical parameters were determined to express the electrical equivalent of hydraulic conductivity in sand and clay systems based on the mode of electrical double-layer formation in both systems. The reliability of the proposed method is tested through applying on two datasets representing sand and clay systems. The first dataset is a clean sand and gravel aquifer in the Keritis basin in Chania, Crete, Greece. The second is mostly clayey sand aquifer in Wadi El-Assuity, Egypt. Application of the present approach in these two cases resulted in promising nearly identical values with the measured hydraulic conductivity via pumping test or geometric hydraulic conductivity via grain size analysis.     

An overview of the diagenesis of the Upper Jurassic carbonates of Jubaila and Hanifa formations, central Saudi Arabia

The Jubaila Formation (Upper Jurassic) in central Saudi Arabia has been divided into lower, middle, and upper parts purely on lithologic grounds. Each part consists of a major lower unit of lime mudstone and a minor upper unit of grainstone. This persistent change in the limestone facies is interpreted as a reflection of repeated shoaling up in the depositional shelf environment. It is a normal marine carbonate sequence that varies in thickness from 85 to 126 m. In the Hanifa Formation, the lowermost brown ledges in the section comprise a series of coarsening upward sequences which generally terminate in a fossiliferous/peloidal packstone and grainstone and subordinately lime mudstone facies. The middle slope member is yellow, blocky weathered shale and marl. Above this slope member are several thick beds of brown-coated fossiliferous wackestone, packstone, and grainstone with the association of lime mudstone in certain levels. These are fairly resistant ledges due to the occurrence of stromatoporoids. Dedolomitization occurs in the Jubaila Formation in various textural forms which include composite calcite rhombohedra, zonal dedolomitization, regeneration of predolomitization fabric of the limestone, and coarsely crystalline calcite mosaics with or without ferric oxide rhombic zones. Rhombohedral pores commonly occur in intimate association with dolomite, possibly resulting from the leaching of calcitized dolomite rhombohedra. The regional dedolomitization was most likely brought about by calcium sulfate solutions reacting with dolomites. The source of sulfate solutions is the dissolved anhydrite deposits of the Arab–Hith Formations, sometime before their erosion, and it takes place at or near an exposed surface. The Hanifa Formation shows various diagenetic features. These include dolomitization, dedolomitization, micritization, cementation, and recrystallization. Most of the examined samples of the Hanifa carbonates are dolomitized and subsequently dedolomitized as evidenced by the presence of iron-coated dolomite rhombs partially or completely calcitized. Dolomite also occurs in the lime mudstone, wackestone, packstone, and grainstone facies, while leaching of wackestone and packstone and dedolomitization of dolomite and dolomitic limestone followed by recrystallization are common processes.     

Fault seal prediction of seismic-scale normal faults in porous sandstone: A case study from the eastern Gulf of Suez rift,Egypt

A study of normal faults in the Nubian Sandstone Sequence, from the eastern Gulf of Suez rift, has been conducted to investigate the relationship between the microstructure and petrophysical properties of cataclasites developed along seismic-scale faults (slip-surface cataclasites) and smaller displacement faults (deformation bands) found in their damage zones. The results help to quantify the uncertainty associated with predicting the fluid flow behaviour of seismic-scale faults by analysing small faults recovered from core, a common procedure in the petroleum industry. The microstructure of the cataclasites was analysed as well as their single-phase permeability and threshold pressure. Faulting occurred at a maximum burial depth of ∼1.2 km. The permeability of deformation band and slip-surface cataclasites varies over ∼1.5 orders of magnitude for a given fault. Our results suggest that the lowest measured deformation band permeabilities provide a good estimate for the arithmetic-mean permeability of the major slip-surface cataclasites. This is because the cataclastic permeability reduction is mostly established early in the deformation history. Stress at the time of faulting rather than final strain appears to be the critical factor determining fault rock permeability. For viable predictions it is important that the slip-surface cataclasites and deformation bands originate from the same host. On the other hand, a higher uncertainty is associated with threshold pressure predictions, as the arithmetic-mean slip-surface cataclasite threshold pressure exceeds the highest measured deformation band threshold pressure by at least a factor of 4.     

Pattern recognition of major asperities using local recurrence time in Alborz Mountains, Northern Iran

In this study, seismic data recorded during the period 01/01/1996 to 09/01/2009 has been used to evaluate the seismic hazard potential along the Alborz region, Northern Iran. The technique of mapping local recurrence time, T _L, is used to map major asperities, which are considered as the areas with maximum hazard. We calculated T _L from a and b values which are in turn derived from the frequency–magnitude relation constants within a radius of 30 km about every corner point of a 10-km spacing grid. Since b value is inversely related to applied stress, the areas with lowest b values and/or shortest T _L are interpreted to locate the asperities or the areas of maximum seismic hazard. To test this method, we computed T _L map using seismic catalogues before and after the 2004 Baladeh earthquake of M _w 6.2. The local recurrence time map before the earthquake shows anomalously short T _L in the epicentral region of the Baladeh earthquake a decade before its occurrence. The T _L map after the earthquake indicates that this large event has redistributed the applied stress in the Alborz region. The microseismicity of the region after the Baladeh earthquake, however, suggests that there are two anomalies in T _L map positioned in Alborz. The places where these anomalies are observed can be considered as the areas with maximum seismic hazard for future large earthquake in the Alborz region.     

Structural control on syn-rift sedimentation,northwestern Red Sea margin,Egypt

Detailed field mapping of a 120-km-long segment of the northwestern Red Sea margin reveals the existence of a number of sediment-input sites where Lower Miocene sediments form coarse-grained fan delta systems. Localizations of the fan deltas at the sediment-input sites (Wadis Gassus, Guesis, Quwyh and Sharm El Bahari) are controlled by structural and topographic elements, including relay ramps between interacting normal fault segments, cross-trend transfer faults, reactivated Precambrian basement fabrics and the plunge directions of tilted fault blocks. Sedimentary facies and geometrical characteristics of the fan deltas indicate that they are progradational and “Gilbert-type” fan delta systems. Variations in size and composition of the conglomerate clasts reflect the heterogeneous lithologies of the Precambrian basement and pre-rift strata in the source areas along the rift margin. Palaeocurrent data show marked changes in paleoflow directions, from northeast in the northernmost fans to east and southeast directions in the southern fans. This change occurs across the Duwi accommodation zone which formed a topographic high separating the oppositely dipping half-grabens in the study area. The data presented in this paper clearly demonstrates that the structural architecture of the northwestern Red Sea margin together with its related topographic expressions played a fundamental role in controlling the drainage network systems, sediment dispersal and localization of the fan deltas in this part of the rift system.     

Leachability of radium-226 from industrial phosphogypsum waste using some simulated natural environmental solutions

This study investigated the leaching of radium-226 from phosphogypsum (PG) waste produced from the fertilizer industry by synthetic solutions that replicate water that may contact the waste in natural conditions. The results indicated that the activity concentration of Ra-226 in the PG was 461 ± 12 Bq kg^?1 and compared with other studies carried out worldwide. The leached percentage of Ra-226 represents the exchangeable fraction loosely bounded in the matrix of the PG waste. The leached fraction of Ra-226 was 6.5 ± 0.6 and 9.0 ± 0.5% when the waste was exposed to rainwater and saline solution, respectively. It is also found that the leaching fraction increased 10–12 ± 0.4% when the waste was exposed to the admixture of saline solution containing Sr²⁺ or Ba²⁺ cations, whereas it was lowered to 4–5 ± 0.5% in the presence of carbonate or sulfate anions. When the PG is used as an economic fertilizer, the irrigation water can leach 7.8 ± 0.6% of Ra-226 that could contribute to plant uptake, thereby to animal and/or human consumption. The primary tests of the drinking water (well and tap resources) consumed by the populations surround the PG facility showed that the activity concentration of Ra-226 was below the minimum detectable activity.     

A quantitative assessment of groundwater resources in the Middle East and North Africa region

The Middle East and North Africa (MENA) region is the world’s most water-stressed region, with its countries constituting 12 of the 15 most water-stressed countries globally. Because of data paucity, comprehensive regional-scale assessments of groundwater resources in the MENA region have been lacking. The presented study addresses this issue by using a distributed ArcGIS model, parametrized with gridded data sets, to estimate groundwater storage reserves in the region based on generated aquifer saturated thickness and effective porosity estimates. Furthermore, monthly gravimetric datasets (GRACE) and land surface parameters (GLDAS) were used to quantify changes in groundwater storage between 2003 and 2014. Total groundwater reserves in the region were estimated at 1.28 × 10⁶ cubic kilometers (km³) with an uncertainty range between 816,000 and 1.93 × 10⁶ km³. Most of the reserves are located within large sedimentary basins in North Africa and the Arabian Peninsula, with Algeria, Libya, Egypt, and Saudi Arabia accounting for approximately 75% of the region’s total freshwater reserves. Alternatively, small groundwater reserves were found in fractured Precambrian basement exposures. As for groundwater changes between 2003 and 2014, all MENA countries except for Morocco exhibited declines in groundwater storage. However, given the region’s large groundwater reserves, groundwater changes between 2003 and 2014 are minimal and represent no immediate short-term threat to the MENA region, with some exceptions. Notwithstanding this, the study recommends the development of sustainable and efficient groundwater management policies to optimally utilize the region’s groundwater resources, especially in the face of climate change, demographic expansion, and socio-economic development.     

Modeling of the radial and transverse components of the albedo function

In this work, we shall confine ourselves to solve analytically the integrals called , for the two components of albedo radiation pressure on an Earth’s satellite. When the Earth’s albedo is variable, as far as we know, this case has not been dealt with analytically. We shall solve these two integrals when the satellite’ horizon is illuminated and when the sun lies on the equator. This approach will facilitate the evaluation of the mentioned two equations. We will also compare our results with previous works obtained numerically.     

Alteration Patterns Related to Hydrothermal Gold Mineralizaition in Meta-andesites at Dungash Area, Eastern Desert, Egypt

Abstract: The hydrothermal alteration patterns associating with the gold prospect hosted by metavolcanics in the Dungash area, Eastern Desert of Egypt, were investigated in order to assign their relationship to mineralization. The metavolcanics of andesitic composition are generated by regional metamorphism of greenschist facies superimposed by hydrothermal activity. Epidote and chlorite are metamorphic minerals, whereas sericite, carbonates, and chlorite are hydrothermal alteration minerals. The auriferous quartz vein is of NEE‐SWW trend and cuts mainly the andesitic metavolcanics, but sometimes extends to the neighbouring metapyroclastics and metasediments. Quartz‐sericite, sericite, carbonate‐sericite, and chlorite‐sericite constitute four distinctive alteration zones which extend outwards from the mineralized quartz vein. The quartz‐sericite and sericite zones are characterized by high contents of SiO₂, K₂O, Rb, and As, the carbonate‐sericite zone is by high contents of CaO, Au, Cu, Cr, Ni, and Y, and the chlorite‐sericite zone is by high contents of MgO, Na₂O, Zn, Ba, and Co. Gold and sulphide minerals are relatively more abundant in the carbonate‐sericite zone followed by the sericite one. The geochemistry of the alteration system was investigated using volume‐composition and mass balance calculations. The volume factors obtained for the different alteration zones, mentioned above (being 1.64, 1.19, 1.17, and 1.07, respectively), indicate that replacement had taken place with a volume gain. The mass balance calculations revealed addition of SiO₂, K₂O, As, Cu, Rb, Ba, Ni, and Y to the system as a whole and subtraction of Fe2O3 from the system. Initial high aK+ and aH+ for the invading fluids is suggested. As the fluids migrated into wallrocks, they became more concentrated in Mg, Ca, and Na with increasing activities of CO₂ and S. The calculated loss‐gain data are in agreement with the microscopic observations. Breakdown of ferromagnesian minerals and feldspars in the quartz‐sericite, sericite, and chlorite‐sericite zones accompanied by loss in Mg, Fe, Ca, and Na under acidic conditions and low CO2/H2O ratio may obstruct the formation of carbonates and sulphides, and the precipitation of gold in these zones. The role of metamorphic fluids in the area is expected to be restricted to the liberation of Au and some associated elements from their hosts.     

Changes in the mullet fishery of Lake Manzala,Egypt

Growth rates of the main mullet species (Liza ramada andMugil cephalus) in Lake Manzala are low compared to those in other Egyptian lakes. But average growth rates during the period 1989–1993 were relatively faster than in the 1960's. Spawning and migration seasons have been determined for every species, and their distribution in the lake, in terms of certain ecological parameters (salinity, turbidity and dissolved oxygen) have been investigated. Changes in the mullet fishery in the lake during the past 70 years have been studied. Due to an increase in nutrient loading and a decrease in salinity, mullet declined from 65 per cent of the total catch during the 1920's to only 2.2 per cent during the early 1980's. As a result of fisheries management and development programmes from 1989 to 1993, mullet production increased to 9.2 per cent of the total catch.