Geochronology and Tectonic Evolution of the West Section of the Jiangnan Orogenic Belt

As an important part of South China Old Land, the Jiangnan Orogenic Belt plays a significant role in explaining the assembly and the evolution of the Upper Yangtze Block and Cathaysia, as well as the structure and growth mechanism of continental lithosphere in South China.The Lengjiaxi and the Banxi groups are the base strata of the west section of the Jiangnan Orogenic Belt.Thus, the research of geochronology and tectonic evolution of the Lengjiaxi and the Banxi groups is significant.The maximum sedimentary age of the Lengjiaxi Group is ca.862 Ma, and the minimum is ca.822 Ma.The Zhangjiawan Formation, which is situated in the upper part of the Banxi Group is ca.802 Ma.The Lengjiaxi Group and equivalent strata should thus belong to the Neoproterozoic in age.The Jiangnan Orogenic Belt consisting of the Lengjiaxi and the Banxi groups as important constituents is not a Greenville Orogen Belt(1.3 Ga–1.0 Ga).The Jiangnan Orogenic Belt is a recyclic orogenic belt, and the prototype basin is a foreland basin with materials derived from the southwest and the sediments belong to the active continental sedimentation.By combining large amounts of dating data of the Lengjiaxi and the Banxi groups as well as equivalent strata, the evolutionary model of the western section of the Jiangnan Orogenic Belt is established as follows: Before 862 Ma, the South China Ocean was subducted beneath the Upper Yangtze Block, while a continental island arc was formed on the side near the Upper Yangtze Block.The South China Ocean was not closed in this period.From 862 Ma to 822 Ma, the Upper Yangtze Block was collided with Cathaysia; and sediments began to be deposited in the foreland basin between the two blocks.The Lengjiaxi Group and equivalent strata were thus formed and the materials might be derived from the recyclic orogenic belt.From 822 Ma to 802 Ma, Cathaysia continued pushing to the Upper Yangtze Block, experienced the Jinning-Sibao Movement(Wuling Movement); as result, the folded basement of the Jiangnan Orogenic Belt was formed.After 802 Ma, Cathaysia and the Upper Yangtze Block were separated from each other, the Nanhua rift basin was formed and began to receive the sediments of the Banxi Group and equivalent strata.These large amounts of dating data and research results also indicate that before the collision of the Upper Yangtze Block with Cathaysia, materials of the continental crust became less and less from the southwest to the east in the Jiangnan Orogeneic Belt; only island arc and neomagmatic arc were developed in the eastern section.Ocean-continent subduction or continent-continent subduction took place in the western and southern sections, while intra-oceanic subduction occurred in the eastern section.Comprehensive analyses on U-Pb ages and Hf model ages of zircons, the main provenance of the Lengjiaxi Group is Cathaysia.     

华南印支期碰撞造山--十万大山盆地构造和沉积学证据

十万大山盆地是云开造山带前陆地区的一个窄长的晚二叠世—中三叠世沉积盆地,位于扬子与华夏陆块拼接位置的西南端。十万大山盆地晚二叠世—中三叠世沉积由巨厚的磨拉石建造组成,并构成多个向上变粗和向上变细的构造-地层层序。云开造山带及前陆冲断带上泥盆统至下二叠统中发育了大量的印支期形成的薄皮褶皱和冲断构造。这些指示扬子和华夏陆块在印支期发生了强烈陆内碰撞与会聚及前陆盆地的沉积作用。P2 /P1 之间的不整合面是伸展构造向挤压构造转换的转换面,为华南印支期碰撞挤压造山或活化造山的序幕。T3 /T2 之间不整合面是挤压构造向伸展构造转换的转换面,是印支期活化挤压造山结束的界面,标志着晚二叠世开始的碰撞造山作用的结束。华南内部晚二叠世—中三叠世构造运动性质及转换与当时华南南缘存在的古特提斯洋的闭合及印支板块与华南陆块的碰撞作用有关。     

Mesozoic-Cenozoic Multi-Stage Intraplate Deformation Events in the Langshan Region and their Tectonic Implications

In the Langshan region, northwestern China, marked multi-stage intraplate deformation events have occurred since the Mesozoic, including（1） northeast-striking ductile left-lateral strike slip during the Middle-Late Triassic, which is closely related to the collision between the North China and the Yangtze plates;（2） top-to-the-southeast thrust with northwest-southeast trending maximum compression during the Late Jurassic;（3） nearly eastward detachment during the Early Cretaceous;（4） top-to-the-northwest thrust with northwest-southeast trending maximum compression during the Late Cretaceous and Early Cenozoic;（5） northeast-striking brittle left-lateral strike slip with nearly north-south trending maximum compression; and（6） northwest-southeast extension during the Middle-Late Cenozoic. All these deformation events belong to the intraplate deformation across the entire Central Asian region and respond to the tectonic events along the plate boundaries or deep tectonics. The structures developed in early events in the crust were the most important factors controlling the later deformation styles, and few new structures have later developed. Based on previous research and our results, the paleostress inversion in the Langshan region shows that the Mesozoic intraplate deformations in the study region mainly resulted from the tectonic events from the Paleo-Pacific region and have no or a weak relation to the Tethys region. During the Late Jurassic, the maximum compression from the Mongolia-Okhotsk region cannot be excluded. The Langshan region is the bridge between southern Mongolia and the western Ordos tectonic belt and is thus important to understand the nature and relationship between both regions.     

下扬子地区前陆变形构造格局及其动力学机制

华北板块与扬子板块于印支—早燕山期发生陆—陆碰撞时,使造山带南部的下扬子地区成为前陆变形带。下扬子前陆变形带上,大致以长江为界,北部的逆冲推覆构造系统为向南运动,南部的逆冲推覆构造系统为向北运动,总体呈两套对冲的逆冲推覆构造系统。长江以北前陆变形的动力来自华北与扬子板块沿大别—胶南造山带的碰撞,长江以南前陆变形的动力来自沿江南隆起带的板内造山。     

龙门山陆内复合造山带的四维结构构造特征

位于扬子陆块和松潘陆块过渡带上的龙门山造山带,是在印支期中国大陆主体拼合和秦岭造山带形成过程中开始发育、燕山期陆内构造活动中继承发展、喜马拉雅期印-亚碰撞和青藏高原隆升过程中遭受改造并定型的。现今构造面貌是扬子陆块向北漂移过程中产生的北西向推挤力、源自秦岭造山带的南北向推挤力和源自青藏高原的东西向推挤力三者联合作用的结果,因此是一个典型的陆内复合造山带。其陆内复合结构构造特征具有下列特点。 1）倾向上,龙门山造山带由茂县-汶川断裂、北川-映秀断裂、安县-灌县断裂和广元-大邑（隐伏）断裂4条主干断裂分隔显示出明显的分带变形特征,由北西向南东具有层次渐浅、强度递减、卷入层位变新的趋势,总体上呈前展式扩展。 2）走向上,龙门山造山带呈现北、中、南段三分格局,它们在基底性质及展布、地层发育及演化历史、变形特征、沉降与隆升特征、活动构造等多个方面具有差异。 3）垂向上,龙门山造山带发育多层次滑脱构造,最重要的滑脱界面是15～20 km深处的低速层和中下三叠统富膏盐岩层,由此控制了深浅构造不一致的变形幅度和变形样式。 4）时间演化上,龙门山造山带表现出倾向上的前展式扩展和走向上的分段式递进性或序次性演化的趋势：印支期,龙门山中北段活动较强,由北东向南西逐渐扩展,主要为挤压逆冲和左旋走滑作用; 燕山期,构造活动总体上趋于相对平静,具有南北分段、由北东向南西迁移的特征; 喜马拉雅山期,龙门山中南段活动较强,由南西向北东逐渐扩展和递进,主要为挤压逆冲、隆升和右旋走滑作用。     

大别造山带南界襄樊—广济断裂带的演化规律与构造意义

自中三叠世扬子与华北板块发生碰撞—深俯冲作用以来,大别造山带南界上的襄樊—广济断裂带主要经历过两次变形事件: 1)早期变形事件发生在中三叠世末—晚三叠世初的造山带折返阶段,表现为造山带南边界上的韧性剪切带。这期北西—南东走向的剪切带向南西陡倾,发育北西—南东向的矿物拉伸线理,主要为右行走滑的运动性质,属于造山带斜向折返的侧边界走滑剪切带。造山带折返过程中将前陆褶断带北缘原先东西向褶皱改造为北西—南东走向。2)晚期变形事件发生在晚侏罗世,表现为脆性逆冲断层,使得前陆褶断带向北东逆冲在造山带南缘之上,同时在前陆上形成了一系列的逆冲断层。该断裂带的晚期逆冲活动与郯庐断裂带左行平移同时发生,代表了滨太平洋构造活动的开始。     

江南造山带东段新元古代至早中生代多期造山作用特征

新元古代江南造山带远离晚中生代活动大陆边缘,是研究华南地区新元古代至早中生代多期造山作用的理想对象。文章通过对江南造山带东段沉积建造、岩浆活动、构造变形以及同位素年代学数据的综合分析,总结了其晋宁期、广西期以及印支期造山作用的特征。江南造山带东段在晋宁期经历了南北两侧大洋俯冲和两期碰撞造山作用。新元古代早期(880~860 Ma)双溪坞岛弧与扬子陆块东南缘发生弧-陆碰撞作用,形成淡色花岗岩、高压蓝片岩、NNE向褶皱-逆冲构造以及弧后前陆盆地。新元古代中期(约850 Ma),扬子陆块北缘开始发育由北向南的大洋俯冲。随着俯冲作用的进行,弧后盆地发生关闭,扬子陆块与华夏陆块发生陆-陆碰撞并形成新元古代(820~810Ma)江南造山带,导致近E-W走向褶皱-逆冲构造、韧性变形以及过铝质花岗岩的发育。江南造山带东段在约810Ma开始发生后造山垮塌和裂谷作用,以发育南华纪早期(805~750 Ma)花岗岩、中酸性火山岩、基性岩以及裂谷盆地为特征。江南造山带东段万载—南昌—景德镇—歙县断裂带以南地区卷入了华南广西期造山作用,发育近E-W走向由南向北的逆冲构造(465~450 Ma)、NNE向正花状构造(449~430 Ma)以及后造山近E-W走向韧性走滑剪切带(429~380 Ma)。印支期造山作用导致了NNE向褶皱-逆冲构造和花岗岩的发育,并奠定了江南造山带东段的基本构造面貌。     

扬子地块东南缘沉积岩的Nd同位素研究

扬子地块东南缘上溪群分布区及其周边沉积岩的Ｎｄ同位素研究结果,支持存在一条苏浙皖古生代裂陷槽（或江南深断裂）的观点。上溪群以北直至长江边所分布的震旦系－古生代的盖层沉积岩,其Ｎｄ模式年龄有两组,表明物源区不同。裂陷槽以北,沉积岩的物源区为Ｎｄ模式年龄约２.０～２.１Ｇａ的扬子物源区;以南的沉积岩表现出明显的幔源物质混染,显示出元古代岩浆活动的影响,而上溪群分布区以南直到江绍断裂附近主要表现上溪物源区的影响,华夏地块古老基底岩石则无显著贡献。     

下扬子地区沿江前陆盆地形成的构造控制

华北板块与扬子板块沿大别－胶南造山带的陆－陆碰撞使造 山带侧的扬子板块成为前陆变形带,并在其上发育了沿江前陆盆地。沿江前陆盆地初始继承性发育于下扬子区海退末期残留的陷区,随后于黄马青期受北界滁河断裂与南界江南断裂的对冲控制而成为双向压隐型盆地。     

华南东南部上地幔远震P波速度结构及意义

本研究利用114个固定台站记录的121个远震事件,以钦杭结合带为中心,采用天然地震层析成像构建了华南东南部上地幔P波速度结构模型。研究结果表明：（1）钦杭结合带、武夷成矿带以及南岭成矿带的深部结构存在着差异,说明3个成矿带经历了不同的构造演化过程;（2）江绍断裂的上地幔中存在着低速异常,推测该低速异常为从地幔过渡带或者下地幔上涌的热物质,与钦杭结合带和武夷成矿带的成矿作用有着密切的关系;（3）下扬子地区上地幔底部的高速异常可能为拆沉的岩石圈,而华夏板块上地幔顶部的高速异常则有待进一步研究。本研究的结果为认识华南东南部的深部结构提供了新的证据。     

景德镇-温州大地电磁剖面深部电性结构研究

华南大陆历经长期复杂的构造演化,其浅部复杂而多样的构造形态与深部壳幔结构及其动力学机制有着密切联系,但当前的深部探测资料有限,深部构造并不明确。为了研究华南的深部岩石圈结构状态,布设了多条宽频长周期大地电磁联合探测剖面。通过对景德镇-温州剖面的数据处理,获得了该剖面的岩石圈电性结构模型。分析表明:华夏地块与扬子地块东部的江南造山带以江绍断裂为界;华夏地块整体呈现高阻特征,可能具有深部岩石圈背景的上虞-政和-大浦断裂将其分为华夏褶皱带与东南沿海岩浆岩带;扬子地块东部的江南造山带整体电阻率较低,结构更破碎,受到深部改造明显,岩石圈底界约为110 km;剖面发现3处低阻带通道,可能与软流圈上涌相关;江绍断裂呈喇叭状向深部张开,华夏地块与扬子地块的裂解拼合可能与断裂深部的高导体活动有关。华夏地块与扬子地块的接触状态呈现为双向汇聚,华夏地块在上地幔挤入扬子地块,深部接触边界可能越过江绍断裂带。     

天山地区碰撞后构造与盆山演化

研究表明,近东西向的天山造山带基本格架在古生代晚期已经初步形成;平行造山带广泛分布的二叠纪红色磨拉石证明当时造山隆升作用非常强烈,导致前陆盆地普遍发育。三叠纪,天山造山带遭受区域剥蚀夷平,盆山高差缩小,盆地规模进一步扩大。侏罗纪—古近纪,由于板内伸展作用,在准平原化的天山地区形成了一系列伸展盆地,呈近东西向分布。新近纪以来,受南面印度—欧亚陆—陆碰撞的影响,天山地区发生强烈陆内变形,以逆冲推覆和褶皱堆叠为特征;节理统计表明新生代的主压应力为南北方向。晚新生代,由印度和欧亚大陆碰撞产生的强烈挤压作用对大陆腹地的天山地区影响很大：前中生代块体发生剧烈隆升和褶皱,伴随大规模新生代坳陷的形成,导致盆山高差急剧增大;脆性剪切与挤压变形构造叠加在韧性变形的古生代岩层之上。同时,中生代拉伸盆地发生构造反转,形成新生代挤压盆地,盆山交接带变形以台阶状逆断层和断层相关褶皱为特征。由于盆地朝造山带的下插作用,使古生代的岩层呈构造岩片方式逆冲推覆在盆地边缘的中新生代岩层之上,当穿越不同地质构造单元时表现出不同的运动学特征。强烈挤压褶皱冲断是晚新生代盆山交接带的基本特征和最普遍的盆-山耦合方式,局部伴有小规模近东西向的走滑断层。中生代沉积岩的褶皱与断裂、侏罗纪煤层自燃及烧结岩的形成、强烈地震与断层活动、以及新疆独特的镶嵌状盆山格局,都是新近纪以来构造作用的产物。     

Kinematics and geochronology of multistage ductile deformation along the eastern Alxa block,NW China: New constraints on the relationship between the North China Plate and the Alxa block

The NE-trending Bayanwula Shan–Lang Shan is an important tectonic belt lying between the North China Plate (NCP) to the east and the Alxa block to the west. An understanding of its nature and the timing of deformation are essential to understand the relationship between the NCP and the Alxa block. Two phases of ductile deformation have been observed in this belt. Large-scale top-to-the-west ductile thrusting characterized the early deformation in the Bayanwula Shan–Lang Shan. Nearly east–west trending quartz stretching lineations and lineations formed by amphibole and biotite are well developed. Different types of sheath and oblique folds with east–west trending fold hinges are also developed in the region. The shear strain of this ductile thrust is up to 17. The ductile deformation may have resulted from the top-to-the-west thrusting of the northern part of the NCP over the Alxa block, and may have occurred ca. 351 Ma (biotite ⁴⁰Ar/³⁹Ar age). Later ductile deformation was expressed as NE-trending sinistral shear along the entire Bayanwula Shan–Lang Shan and likely occurred ca. 250 Ma (biotite and muscovite ⁴⁰Ar/³⁹Ar ages); this shear may have resulted from the collision between the Yangtze and North China plates to the south during the Triassic. Combined with recently obtained detrital zircon U–Pb ages for the area, the ductile deformation events in the eastern Alxa block indicate that the block may not have been part of the NCP, at least before the end of the Devonian. Both blocks were located in the Paleo-Asian Ocean during the Paleozoic and collided or amalgamated with each other at the end of the Devonian.     

Isotopic Ages of the Penglai Group in the Jiaobei Belt and Their Geotectonic Implications1

Abstract The Penglai Group in the Jiaobei Belt is the only remaining cover of the Archaean to Early Proterozoic crystalline basement in eastern Shandong. The ages of deposition of the Penglai Group and of its deformation and metamorphism have long been a subject of speculation. Whole-rock Rb-Sr ages, illite-whole-rock pair Rb-Sr ages and illite K - Ar ages recently obtained from the Penglai Group slates are reported and interpreted in this paper. On the basis of structural and metamorphic studies coupled with analyses of illite crystallinity, XRD and SEM, a whole-rock age of 473 ± 32 Ma (Ordovician) is interpreted as the time of termination of burial metamorphism experienced by the Penglai Group. Therefore, the age of the Penghai Group is older than Ordovician. The first-phase folding and syntectonic low greenschist facies metamorphism in the Penglai Group, i.e. the Penglai Movement, took place before 299±4 Ma B.P., i.e in the Late Carboniferous. The Penglai Movement that occurred in the Jiaobei Belt on the southern margin of the North China Plate is attributed to collision between the North China and Yangtze plates along the Jiaonan Collision Belt. This demonstrates that the continent-continent collision between the North China and Yangtze plates east of the Tan-Lu Fault Zone took place in the Late Carboniferous. The collision caused N-S compression and deformation in the southern margin belt of the North China Plate north of the Qinling-Dabieshan-Jiaonan Collision Belt.     

中国东部中上元古宇发育特征及其对板块和地体构造研究的意义

<正> 本文涉及的中上元古宇包括下寒武统之下,吕梁运动面(即相当于长城系底面)以上的一套地层。中、晚元古宙的沉积在我国东部分布较广,在不同的小区内,在沉积建造和地层序列上常显示出各自的特色。可按沉积时限、地壳构造活动性、沉积物特征和生物群面貌将东部中上元古宇分为四种沉积类型,简称蓟县型、旅大型、扬子型和江南型,名称来源于代表性剖面所在地或沉积区的地名。     

武夷山北缘断裂带动力学研究

华南武夷山北缘边界被绍兴－兴山－东乡断裂带所限。该断裂带到少保留了三期构造事件的形迹，第一期发生在８００Ｍａ～９００Ｍａ的晚元古代，呈ＮＷ向ＳＥ的区域推覆韧剪变形运动，以构造混杂岩和区域绿片岩相－角闪岩相变质，强烈的褶皱和韧剪变形为特征，对应于古洋盆关闭，华南复合地体与江南岛弧撞焊接过程，第二期发生在４５８Ｍａ～４２１Ｍａ的志留纪，表现为从北向南的韧剪变形运动，伴有左旋走滑韧性剪切，以糜棱岩化和进变质作用为特征．黒云母多变为硅线石。该期变形使第一期构造形迹被强烈选加置换。其动力学背景与闽东南地体朝武夷山的拼贴增生事件有关。第三期属中生代陆内变形，是一种高构造位的左旋走滑脆性剪切，以岩石的破裂和岩块的水平位移为特征．并具转换拉伸性质，导致中生代火山沉积盆地的形成。     

皖南歙县花岗闪长岩构造变形、 年代学及其地质意义

位于江南造山带北缘的歙县地区,有大量的花岗质岩体出露。本文对歙县花岗闪长岩体进行了构造变形分析和LA-ICP-MS锆石U-Pb测年。构造变形特征显示该地区花岗闪长岩曾遭受深层次韧性变形,其中广泛发育的波状消光、动态重结晶颗粒、旋转残斑、云母鱼等是矿物受应力作用发生韧性变形的指示,花岗闪长岩中石英和长石的变形行为指示韧性变形温度为500 ℃～580 ℃。对歙县地区花岗闪长岩测年,获得加权平均年龄为822.8±9.5 Ma（MSWD = 0.55,n = 23）,代表岩体的侵位年龄。综合前人研究资料,我们认为景德镇—歙县构造带内的岩石韧性变形时代应该在770 Ma左右,其可能反映了扬子板块与华夏板块最终碰撞拼合。     

Indenter-tectonics in the Philippines: Example from the Palawan Microcontinental Block - Philippine Mobile Belt Collision

Abstract. The aseismic Palawan microcontinental block is an oceanic bathymetric high that has collided with the seismically-ac-tive Philippine Mobile Belt since the Early Miocene. Consequently, tectonic microblocks immediately north (Luzon) and south (Western Visayas Block) of the collision front rotated in opposite senses. The rotation led the microblocks to onramp adjacent strike-slip faults, and converted these to subduction zones, namely, the current Manila and Negros Trenches. In addition, the collision also initiated the southward propagation of a major left-lateral strike slip fault, the Philippine Fault Zone, and the Philippine Trench, which bounds the Philippine archipelago along its eastern boundary. Based on onshore and offshore data, the Philippine Fault Zone and the East Luzon Trough - Philippine Trench appears to also propagate northward. Furthermore, the opposite direction of propagation is also noted for the Manila and Negros Trenches from the locus of the collision in the Central Philippines to their northern and southern extensions, respectively. The ages of initiation of the Manila Trench (Early Miocene), Philippine Fault Zone (Middle Miocene) and Philippine Trench (Pliocene) as encountered along a west to east transect in the Central Philippines are consistent with the collision and subsequent indentation of Palawan with the rest of the Philippine Mobile Belt.     

Early–Middle Jurassic evolution of the northern Yangtze foreland basin: a record of uplift following Triassic continent–continent collision to form the Qinling–Dabieshan orogenic belt

The northern Yangtze foreland basin system was formed during the Mesozoic continental collision between the North and South China plates along the Mianlue suture. In response to the later phase of intra-continental thrust deformation, an extensive E–W-trending molasse basin with river, deltaic, and lake deposits was produced in front of the southern Qinling–Dabieshan foreland fold-and-thrust belt during the Early–Middle Jurassic (201–163 Ma). The basin originated during the Early Jurassic (201–174 Ma) and substantially subsided during the Middle Jurassic (174–163 Ma). A gravelly alluvial fan depositional system developed in the lower part of the Baitianba Formation (Lower Jurassic) and progressively evolved into a meandering river fluvial plain and lake systems to the south. The alluvial fan conglomerates responded to the initial uplift of the southern Qinling–Dabieshan foreland fold-and-thrust belt after the oblique collision between the Yangtze and North China plates during the Late Triassic. The Qianfoya Formation (lower Middle Jurassic) mainly developed from shore-shallow lacustrine depositional systems. The Shaximiao Formation (upper Middle Jurassic) predominantly consists of thick-bedded braided river delta successions that serve as the main body of the basin-filling sequences. The upward-coarsening succession of the Shaximiao Formation was controlled by intense thrusting in the southern Qinling–Dabieshan fold-and-thrust belt. Palaeogeographic reconstructions indicated an extensive E–W foredeep depozone along the fold-and-thrust belt during the Middle Jurassic (174–163 Ma) that was nearly 150 km wide. The depozone extended westward to the Longmenshan and further east to the northern middle Yangtze plate. The northern Yangtze foreland basin was almost completely buried or modified by the subsequent differential thrusting of Dabashan and its eastern regions (Late Jurassic to Cenozoic).     

长江中下游燕山期逆冲推覆构造及成因机制

长江中下游地区为我国著名铜、铁多金属成矿带之一.本文根据长江中下游及邻近地区构造等特征,将该区构造单元自北向南划分为华北地块、大别造山带、长江中下游前陆构造带、扬子地块、华夏地块;并进一步将长江中下游前陆构造带细分为保康-武汉-宿松-巢湖褶冲带、长江中下游中生代坳陷带、通山-瑞昌-石台-宁国褶冲带三个次级构造带.在燕山早期,长江以北的保康-武汉-宿松-巢湖褶冲带逆冲构造极性指向SE,而长江以南的通山-瑞昌-石台-宁国褶冲带逆冲构造极性指向NW.长江以南褶皱样式在岳阳-通山-瑞昌一线以南由隔挡式变为隔槽式,叠瓦式逆冲断裂更发育.在九岭-幕阜山隆起及南部的白垩纪红色盆地基底中逆冲断裂多为高角度,褶皱多为隔槽式,元古宇的浅变质岩卷入逆冲作用,为典型的厚皮构造.长江以北的紧闭同斜褶皱主体形成在印支期,随后被早燕山期的逆冲推覆作用改造.结合野外地质调查,通过对已有跨长江中下游地区的深地震剖面重新解释,发现以长江为界,长江中下游地区北侧深部、浅部构造处于耦合状态;而南侧深部、浅部构造已经脱藕,形成上下地壳的“鱼骨刺”结构,深部构造可能是是印支期扬子地块向华北地块下俯冲的残余结构.长江中下游地区浅部从北向南的逆冲作用应该与大别造山带超高压变质岩挤出有关,而从东南向北西的逆冲推覆作用可能同中侏罗世古太平洋板块向亚洲大陆俯冲有关.