Preliminary Research on Relation Between Field and Source in Earthquake Preparation

The "field" and "source" are two important branches in seismology and earthquake research.In this paper,we use a computer model to study the relation between the field and the source in earthquake activity.In our modeling,a network of nonlinear elements is used to simulate seismic activity of seismic zones in a seismotectonic block.Constant strain rate is enforced on the boundary of the model,cyclic seismic activity,quasi-periodic variation of stress field intensity,and strain energy are observed with high and low fluctuations.There is a main seismicity area in seismic cycles,and the main seismicity area shows the spatial migration during different seismic cycles.If the precursory area is related to high element stress,it is found that the development of precursors in our model is quite complicated.No certain relation between the precursors and earthquakes has been discovered.Anomalies show different characteristics in the seismic quiet period and active period.All of the seismic zones in the system hav     

Surface Wave Group Velocity Tomography Imaging from Ambient Noise for Fujian Province and Its Adjacent Areas

Two-month continuous waveforms of 108 broadband seismic stations in Fujian Province and its adjacent areas are used to compute noise cross-correlation function (NCF). The signal quality of NCF is improved via the application of time-frequency phase weighted stacking. The Rayleigh and Love waves group velocities between 1s-20s are measured on the symmetrical component of the NCF with the multiple filter method. More than 5,000 Rayleigh wave dispersion curves and about 4,000 Love wave dispersion curves are obtained and used to invert for group velocity maps. This data set provides about 50km resolution that is demonstrated with checkerboard tests. Considering the off great circle effect in inhomogeneous medium, the ray path is traced based on the travel time field computed with a finite difference method. The inverted group velocity maps show good correlation with the geological features in the upper and middle crust. The Fuzhou basin and Zhangzhou basin showed low velocity on the short period group velocity maps. On the long period group velocity maps, the low velocity anomaly in the high heat flow region near Zhangzhou and clear velocity contrast across the Zhenghe-Dapu faults, which suggests that the Zhenghe-Dapu fault might be a deep fault.     

天津滨海地区浅层剪切波速与基底构造关系研究

Shear wave velocity is one of the important dynamic characteristics of soil layers and applied widely in aseismic engineering. In this paper, 500 drill logging data are used to make a linear interpolation based on 0.01°×0.01°×1m grid. A shallow 3-D shear wave velocity structure of Tianjin coastal area is obtained. According to the data and geological background, we selected two typical velocity profiles to try to introduce and explain its relationship to basement structure. The results show that the shear wave velocity structure clearly presents the characteristic of stratification and lateral inhomogeneity. Furthermore, the difference of the shear wave structure between tectonic elements is clear and the velocity structure between the two sides of the local or border fault in the Quaternary is disturbed or affected significantly. It intuitively shows that the basement structure and fault activity of this region had good control of sedimentation development and strata formation in the Quaternary period which would have an important effect on engineering seismic and geological condition evaluation.     

Shallow velocity structure and hidden faults of Kunming city region

In order to image the 3-D velocity structure of its shallow crust in Kunming region,China,finite-difference seis-mic tomography is used to invert the seismic data selected carefully from six-shot data. The result lays a founda-tion for the discussion of the relationship between the obtained velocity structure and the hidden faults,and for the illumination of the depth extents of main active faults surrounding Kunming city. Puduhe-Xishan fault lies on the western margin of the Kunming basin and is just situated on the west edge of the low velocity anomaly zone found at all depth levels. This indicates that this fault is a borderline fault of the Kunming basin. It can be concluded that the fault dips eastwards with a steep angle and its depth extent is large. Puji-Hanjiacun fault and Heilong-tan-Guandu fault play a role in controlling the low velocity anomaly zone in middle basin. The depth extents of the two faults are comparatively small,without traversing the interface of basin floor.     

Rayleigh wave phase velocity tomography and strong earthquake activity on the southeastern front of the Tibetan Plateau

To investigate the relationship between velocity structure and earthquake activity on the southeastern front of the Tibetan Plateau, we make use of continuous observations of seismic ambient noise data obtained at 55 broadband stations from the regional Yunnan Seismic Network. These data are used to compute Rayleigh wave Green's Functions by cross-correlating between two stations, extracting phase velocity dispersion curves, and finally inverting to image Rayleigh wave phase velocity with periods between 5 and 34 s by ambient noise tomography. The results show significant lateral variations in crustal and uppermost mantle structures in the studied region. Phase velocity anomalies at short periods(5–12 s) are closely related to regional tectonic features such as sediment thickness and the depth of the crystalline basement. The Sichuan-Yunnan rhombic block, enclosed by the Honghe, Xiaojiang and Jianchuan faults, emerges as a large range of low-velocity anomalies at periods of 16–26 s, that inverts to high-velocity anomalies at periods of 30–34 s. The phase velocity variation in the vicinity of the Sichuan-Yunnan rhombic block suggests that the low-velocity anomaly area in the middle-lower crust may correspond to lower crustal channelized flow of the Tibetan Plateau. The spatial distribution of strong earthquakes since 1970 reveals that the Yunnan region is inhomogeneous and shows prominent characteristics of block motion. However, earthquakes mostly occur in the upper crust, with the exception of the middle-Yunnan block where earthquakes occur at the interface zone between high and low velocity as well as in the low-velocity zones, with magnitudes being generally less than 7. There are few earthquakes of magnitude 5 at the depths of 15–30 km, where gather earthquakes of magnitude 7 or higher ones which mainly occur in the interface zone between high and low velocities with others extending to the high-velocity abnormal zone.     

Crustal P-wave velocity structure in the northeastern margin of the Qinghai-Tibetan Plateau and insights into crustal deformation

The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area,and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure,shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile(L1) increases from ~43 km in the western margin of Ordos Block to ~56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arclike tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies(LVZ1 and LVZ2) are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10–0.20 km s-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2(Tongchuan-Huianbu-Alashan left banner seismic sounding profile) and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by "uplift and depression" undulations, showing the characteristics of localized compressional deformation.Moreover, there are low-velocity zones with alternative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15–0.25 km s-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 km, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.     

The complexity feature of crust-mantle boundary in Zhangbei seismic region and its tectonic implication

The ProP waveform data obtained from a deep seismic sounding profile, which ran through Zhangbei seismic region, were processed by means of both seismic wave complexity coefficient and frequency spectrum analysis methods, and the complexity characteristics of crest-mantle boundary beneath the studied area and its adjacent region were determined. The results show that the place below epicenter can be taken as boundary, the northern side of which is Inner Mongolia axis with small complexity coefficient and the southern side of which is Huai＇an basin with large complexity coefficient. The different spectrum patterns at the two sides of the epicenter were inferred from spectrum analysis. In the epicentral area, there have been multi-period magmatic eruptions since Meso-Cenozoic and craters exist at the surface. From the velocity imaging of middle and upper crust in Zhangbei seismic region it can be found that there are crustal low velocity bodies around the craters and also there are low velocity zones, which went into deep crust. It is suggested that the distinct zones of crust-mantle boundary complexity may be the margin, where the magma had intruded due to magma activity in Meso-Cenozoic. The southern side with large complexity coefficient is deep magmatic activity area and the northern side with small complexity coefficient is stable crust-mantle tectonics. The difference of crust-mantle complexity provides deep background for the development of strong earthquake.     

Natural gas origins of large and medium-scale gas fields in China sedimentary basins

The integrated study of the geological and seismic reflection data from the drilling area of CCSD has discovered that the density and the P-wave velocity of orthogneiss are almost the same as that of the paragneiss in the area; but the orthogneiss and the paragneiss hold different reflection attributes. The strong seismic reflector packes coinciding spatially with the paragneiss suites have implied that the paragneiss buried in the metamorphic crust itself can cause bone-like seismic reflector sets. The P-wave velocity of paragneiss shows little apparent difference with that of the orthogneiss; but its transverse wave velocity is lower, with the Vp/Vs ratios being high. The paragneiss has partially inherited the layering structures and textures of the protolithe of sedimentary rocks, hence shows strong heterogeneity and anisotropy, that is why the paragneiss are able to produce the bone-like reflectors in the upper crust. The low transverse wave velocity of paragneiss often means weak shear resistance, which will further cause cracks or fractures in the rock, consequentially increase its porosity and permeability during tectonic movements, and form the paragneiss reservoirs of low-permeability zones for gases uplifted from the deeper crust. Because the paragneiss in the crustal metamorphic basement can cause the seismic reflectors, seismic reflection sections are able to provide information about the paragneiss under certain prerequisites.     

Rayleigh wave phase velocities of South China block and its adjacent areas

Using records of continuous seismic waveforms from 609 broadband seismic stations in the South China Block and its adjacent areas in 2010–2012, empirical Green's functions of surface waves were obtained from cross-correlation functions of ambient noise data between these stations. High quality phase velocity dispersion curves of Rayleigh waves were obtained using time-frequency analysis. These interstation dispersion curves were then inverted to build Rayleigh wave phase velocity maps at periods of 6–50 s. The results of phase velocity maps indicate that phase velocities at 6–10 s periods are correlated with the geological features in the upper crust. Major basins and small-scale grabens and basins display slow velocity anomalies; while most of the orogenic belts and the fold belts display high velocity anomalies. With the gravity gradient zone along Taihang Mountain to Wuling Mountain as the boundary for the phase velocity maps at period of 20–30 s, the western area mainly displays low velocity anomalies, while the eastern side shows high velocity anomalies. Phase velocities in the eastern South China Block south to the Qinling-Dabie orogenic belt is higher than that in the eastern North China Block to the north, which is possibly due to the differences of tectonic mechanisms between the North China Craton and the South China Block. The phase velocities at periods of40–50 s are possibly related to the lateral variations of the velocity structure in the lower crust and upper mantle: The low-velocity anomalies in the eastern part of the Tibetan Plateau are caused by the thick crust; while the Sichuan Basin and the southern part of the Ordos Basin display distinct high-velocity anomalies, reflecting the stable features of the lithosphere in these blocks. The lateral variation pattern of phase velocities in the southern part of the South China Block is not consistent with the surface trace of the block boundary in the eastern Yunnan Province and its vicinities. The phase velocities in the Sichuan Basin are overall slow at short periods and gradually increase with period from the central part to the edge of the basin, indicating the features of shallower basement in the center and overall stable lithospheric mantle of the basin. The middle and upper crust of the southern Ordos Basin in the North China Block is heterogeneous, while in lower crust and the uppermost mantle the phase velocities mainly exhibit high anomalies. High-velocity anomalies are widespread at the middle of the Qinling-Dabie orogenic belt, as well as the areas in southeastern Guangxi with Caledonian granite explosion, but its detailed mechanism is still unclear.     

京西盆岭构造区积累库仑破裂应力变化对强震的影响

Since 231 B. C.,a total of 15 M6.0 - 7.5 earthquakes have been recorded in the west Beijing basin-range tectonic region( 38.3°- 41.5° E,112°- 116.2° N),a region mainly under the action of tensional normal faulting. In this paper,we calculate the Coulomb stress change of each earthquake and the cumulative Coulomb stress change,and on this basis we analyze the stress triggering of strong earthquakes. The research shows that there are 10 of 14 earthquakes that occurred in the trigger zones,in which the Coulomb stress change is positive,and the trigger rate is 71%. The positive areas of cumulative Coulomb stress change caused by these 15 earthquakes are: middle of northern Liulengshan fault,Northern Huaizhuo basin fault,Xinbaoan-Shacheng fault,Sangganhe fault and Southern Yuxian basin fault. This necessarily increases the seismic risk of these faults and can be used as a reference for future seismic risk analysis in this area.     

基于背景噪声的宁夏及邻区瑞利波层析成像*

使用了宁夏及邻区90个地震观测台站资料,反演得到了该区高分辨率的瑞利面波层析成像结果。选用2012年1月至2013年12月的垂直分量连续波形数据,通过对台站对间进行波形互相关和叠加运算,得到各台站对间的经验格林函数,使用CPS(Computer Programs in Seismology)软件测量得到了4005条瑞利面波群速度频散曲线。选取信噪比大于10的经验格林函数对频散曲线进行了筛选,提取了3182条台站对间的频散曲线,反演得到了研究区周期6~50s,分辨率达0.5°×0.5°的瑞利波群速度分布图像。银川盆地在6~26s为明显的低速异常,且盆地内部的低速异常呈现出不均匀的减弱趋势;关中盆地在6~22s为条状低速异常,呈现出东南部的速度略强于西北部的横向不均匀性;在30~50s呈现出在银川断陷盆地及其以南存在一自北东向西南走向的大区域低速异常区,且表现出山地与盆地之间的主要活动构造带存在明显的地貌界线,即六盘山附近的深大断裂是中国东西两大构造单元的分界线。反演结果与研究区地质构造特征、地层地貌具有较好的相关性,且和银川盆地与穿过盆地的人工地震剖面结果吻合,为该地区活动构造带的动力学和强震发震机理研究提供重要依据。     

基于背景噪声的川滇地区勒夫波层析成像

本文选取了川滇地区98个固定台站记录到的三分量地震背景噪声数据,采用互相关方法提取了勒夫波互相关函数,并利用自适应时频分析方法获取了勒夫波群速度频散曲线,经反演得到周期为8—30 s的勒夫波群速度分布图像.层析成像结果显示:短周期的勒夫波群速度分布图像呈明显的横向不均匀性,且与地表地质和构造特征基本一致,其中四川盆地呈不均匀的低速异常,盆地内成都平原地区的群速度相对低于盆地中部的丘陵地区,速度分界线为遂宁与峨眉山之间的连线,四川盆地内的群速度变化反映出沉积层厚度的变化情况;攀枝花地区呈高速异常,可能与古地幔活动有关,幔源物质以侵入岩和底侵岩浆的形式停留在地壳的不同深度,从而形成高速异常的特征.本文结果为了解川滇地区的构造运动提供了地震学线索,并为下一步研究地壳径向各向异性奠定了基础.      

THE INVERSION OF S-WAVE VELOCITY STRUCTURE IN NINGXIA AND ITS ADJACENT AREA USING BACKGROUND NOISE IMAGING TECHNOLOGY

In this paper, we use seismic waveform data of 90 seismic stations in Ningxia and its adjacent areas recorded between January 2012 and December 2013 to obtain the Rayleigh surface wave group velocity dispersion of the study area according to the noise imaging method and the 3-D S-wave velocity structure of the crust and upper mantle in Ningxia and its adjacent regions. The results show that within the depth range of 10~40km in Yinchuan graben and Liupanshan fault belt there exists a slow anomaly body, and with the increase of the depth this slow anomaly becomes an abnormal slow zone surrounding Lanzhou Basin between the massif arcuate structure of northeastern margin of Tibet Plateau and Alxa block. The 3-D S-wave velocity structure of the crust and upper mantle of the study area presents obvious lateral inhomogeneity. These results have important significance for the study of the dynamics of active tectonic zones and mechanism of strong earthquakes in Ningxia and its adjacent areas.     

利用地震折射和反射波资料研究银川盆地浅部结构和隐伏断裂

银川盆地是华北克拉通西部构造活动较为强烈的一个新生代断陷盆地.为了研究银川盆地的地壳浅部结构和活动断裂特征,我们利用2014年在银川盆地完成的深地震反射剖面数据,采用初至波层析成像方法得到了银川盆地高精度的基底P波速度结构和构造形态;考虑到仅根据速度结构剖面还难以确定断裂的准确位置、断层上断点埋深、断层的近地表构造组合样式等特征,研究中还采用浅层地震反射波勘探方法对银川盆地内的隐伏断裂和1739年平罗8.0级地震的地表破裂带浅部结构进行了高分辨率成像.研究结果表明:银川盆地与两侧地块的浅层P波速度结构和沉积盖层厚度差异较大,银川盆地总体呈现出明显的低速结构特征,盆地基底面起伏变化较大,基底最深处位于芦花台断裂和银川断裂之间的银川市下方,其深度约为7000~7200 m;贺兰山隆起区显示为明显的高速特征,地表出露中-古生代基岩地层,缺失新生代地层;鄂尔多斯地块西缘的浅层P波速度明显高于银川盆地,基底埋深相对较浅,推测其新生界地层厚度小于2500 m.浅层地震反射剖面揭示的地层反射界面形态和断裂的浅部构造特征非常清楚,黄河断裂、贺兰山东麓断裂、银川断裂和芦花台断裂不仅是错断盆地基底的断裂,而且还是第四纪以来的隐伏活动断裂,这些断裂的交替活动形成了"堑中堑"的盆地结构,并对银川盆地的形成、盆地内的新生代地层厚度和第四纪沉降中心具有重要的控制作用;在近地表这些断裂表现为由2~3条断层组成的"Y字形"断裂构造,且主断裂的最新活动可追踪至晚更新世末期或全新世,是构造继承性活动的结果.本文的研究结果不仅可为进一步分析银川盆地的基底结构、隐伏断裂特征和活动构造研究等提供新的地震学证据,而且还可为该区城市规划中避让活动断层提供科学依据.     

基于重力异常反演的三维地震波速度结构分析方法研究

利用重力异常反演测试三维地震波速度结构,存在解不唯一、可靠性不高的问题。将面波反演充分融合到重力异常反演方程中,降低传统反演方法的非唯一性,并提升可靠性。以川滇地区为例,采用融合后的重力异常反演方法分析三维地震波速度结构。通过速度和密度的关系转换,得到对应的重力异常数据。由于面波频射数据主要对地震波横波速度敏感,因此将重力异常数据和初始横波速度相连,依据地震波速度和岩石密度之间的关系,获取重力异常反演方程,用于分析速度结构。选取21.6°~34.2°N、97.1°~105.9°E范围内的川滇地区活动块体作为实验数据,经过实验分析发现：使用该方法迭代反演川滇地区地壳上地幔顶部横波速度,重力异常数据和面波频射数据的残差值分别是6.24 mGal和0.027 km/s,实际拟合效果较好;分析该地区不同深度切面横波速度发现,在24 km深度处,上地壳中含有相对低速层,在44 km深度处,中下地壳中存在低速层;且该方法分析川滇地区三维地震波速度结构解的分辨率较高。     

蒙古中南部地区基于天然地震的 勒夫波相速度层析成像

借助中蒙国际科技合作项目获取的宽频带地震台阵观测数据, 采用小波变换频时分析技术提取了蒙古中南部地区901条双台间基阶勒夫波相速度频散曲线. 通过对该曲线进行二维反演, 重构了蒙古中南部地区12—80 s周期内横向分辨率约为50 km的勒夫波相速度分布图. 结果显示, 蒙古中南部地区相速度分布存在一定的横向不均匀性. 短周期内(12—20 s), 相速度分布受地表地形的控制, 杭爱—肯特山盆表现为高速异常, 乌兰巴托盆地、 中戈壁带及南戈壁带均表现为低速异常; 中等周期内(20—40 s), 研究区相速度分布形态与短周期类似, 但横向不均匀性强度减弱; 中长周期内(40—70 s), 南戈壁带和杭爱—肯特山盆为低速异常, 中戈壁带为高速异常, 整个区域表现出南北低速异常夹中部高速异常的形态, 与瑞雷波中长周期速度分布形态显著不同. 结合中戈壁带分布大量新生代火山岩, 推测研究区域内存在较强的径向各向异性.      

青藏高原东北缘噪声层析成像研究

利用青海、甘肃和宁夏3个区域地震台网两年的波形数据,通过地动噪声层析成像方法给出了青藏高原东北缘8—40 s的瑞雷面波二维群速度结构和三维地壳上地幔顶部的剪切波速度结构。研究结果显示,相比传统的面波层析成像方法,噪声层析成像给出的短周期面波信息能够较好地约束地壳和上地幔顶部结构。8 s和10 s周期的群速度图像与沉积层和基底结晶深度有关,具体而言:祁连山和西秦岭造山带表现为高速体特征,柴达木盆地、河西走廊和鄂尔多斯西缘表现为低速特征;周期为15 s和20 s的瑞雷面波群速度图像反映的是中地壳结构,15 s周期群速度图像上造山带下方高速体向北和向东方向扩展,20 s周期群速度图像呈现大范围低速体,推测为中下地壳低速层影响所致;30 s和40 s周期的群速度图像反映的是莫霍面深度附近的速度结构,具体表现为青藏高原大范围的低速体,向北和向东逐渐表现为高速体,说明青藏高原的莫霍面深度较深,且向北和向东逐渐减薄。另外,三维剪切波速度结构显示祁连地块和甘孜地块中地壳存在大范围低速层,且由柴达木盆地东侧深部的低速层连接,该低速层可能是青藏高原物质北移的一个通道。      

四川芦山MS7.0地震震源区及其周边区域P波三维速度结构研究

利用四川数字地震台网和流动地震台站在芦山M_S7.0地震震后(2013年4月20日—6月23日)记录到的2026次区域地震事件的28188条P波到时资料,采用地震层析成像方法反演得到了芦山地震震源区及其周边区域中上地壳P波三维速度结构. 结果表明,浅部地壳的P波速度异常分布特征与地表地质构造、 地形和岩性密切相关,即成都断陷盆地表现出与第四纪沉积有关的低速异常区;犍为、 乐山一带的川中微升区和川青块体龙门山以西的邻近地带均表现为与构造抬升有关的高速异常;宝兴、 康定附近分布的基性火山岩及火山碎屑岩均呈局部高速异常分布. 芦山地震震源位于高低速异常分界线附近且偏向高速体一侧,其下方存在明显的低速异常分布,可能与流体的存在有关. 流体的作用导致中上地壳内部发震层的弱化,使孕震断层易于破裂,可能对芦山地震起到了触发作用. 芦山地震与汶川地震两次地震的余震密集区相距50 km,这50 km地震空区震源体的深度范围附近目前正处于高速异常区内,加之龙门山断裂带西南段又具有比较典型的断错地貌发育,使得该段地震空区(大邑—邛崃活动断裂破裂空段)现在所处的深浅部构造环境变得复杂,其潜在的地震危险性仍值得进一步关注.      

松辽盆地沉积层结构的短周期地震背景噪声成像研究

使用位于松辽盆地内部的NECESSArray台阵连续两年背景噪声数据,通过波形互相关和多重滤波方法提取到2~14 s较短周期的Rayleigh波群速度和相速度频散曲线,基于快速行进（FMM）面波成像方法得到群速度和相速度成像结果,并采用最小二乘迭代线性方法反演获得了松辽盆地深至12 km的三维S波速度结构.本文成像结果显示：松辽盆地内部S波速度分布的横向不均匀性与该区域的构造单元呈现出良好的空间对应关系.从地表至下方的6 km深度,盆地北部比南部表现出更加强烈的低速异常,这一特征可能与盆地南北的沉积构造差异有关.中央坳陷区低速异常的边界与嫩江断裂走向相互平行,表明盆地基底断裂对盆地形成演化具有一定的控制作用.在垂直速度结构剖面中,2.9 km·s^-1的S波速度等值线与地震反射剖面显示的盆地基底深度大致对应.基于S波速度模型和盆地基底速度（2.9 km·s^-1）,我们获得精细的松辽盆地沉积层厚度模型,结果表明松辽盆地的沉积层厚度分布呈现出中间厚、四周薄的特征,中央坳陷区的沉积层厚度范围大约在3~6 km.