Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

A neural network approach to ship track-keeping control

This paper presents an on-line trained neural net work controller for ship track-keeping problems. Following a brief review of the ship track-keeping control development since the 1980's, an analysis of various existing backpropagation-based neural controllers is provided. We then propose a single-input multioutput (SIMO) neural control strategy for situations where the exact mathematical dynamics of the ship are not available. The aim of this study is to build an autonomous neural controller which uses rudder to regulate both the tracking error and heading error. During the whole control process, the proposed SIMO neural controller adapts itself on-line from a direct evaluation of the control accuracy, and hence the need for a “teacher” or an off-line training process can be removed. With a relatively modest amount of quantitative knowledge of the ship behavior, the design philosophy enables real time control of a nonlinear ship model under random wind disturbances and measurement noise. Three different track-keeping tasks have been simulated to demonstrate the effectiveness of the training method and the robust performance of the proposed neural control strategy     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

PROPAGATION OF 30—60 DAY LOW FREQUENCY OSCILLATIONS AND THEIR INFLUENCE UPON THE SUBTROPICAL WESTERLIES JET STREAM DURING NORTHERN HEMISPHERE WINTER

Based on daily ECMWF gridpoint data of two winters during 1981—1983 including an ENSOyear,propagation of low frequency oscillations(LFO)during Northern Hemisphere winters andtheir influences upon 30—60 day oscillations of the subtropical jet stream are studied with the sta-tistical methods as complex empirical orthogonal function(CEOF)and so on.Results show that inthe winter of a normal year(1981—1982),30—60 day oscillations in the subtropical zone aremainly in the northern and southern flanks of exit region of jet stream.In the ENSO year(1982—1983),they are mainly in the vicinity of entrance and exit regions of jet stream.Intraseasonalchanges of subtropical jet stream manifested themselves as latitudinal fluctuation or longitudinalprogression or regression of about 40 day period.There are marked differences between propagat-ing passages of low frequency modes responsible for changes of subtropical jet stream in the normalyear(1981—1982)and in the ENSO year(1982—1983).Changes of oscillation amplitude showobvious phases.In general,the one in late winter is stronger than that in early winter,strongestone occurs in February.     

Morphological characters of the two-ribbon flare of 1981 May 13 and their explanation

We give a summary of the morphology of the two-ribbon flare of 1981 May 13. One striking feature is that the Ha flare began at about 0338' UT and the double-ribbon structure was formed about 0346, $\text{before}$ the impulsive phase of the radio 3 cm burst at 04 11 UT. The 3 cm radio burst flux beginning at 03 33 UT showed only slow, stepwise increases lasting half an hour until the impulsive phase and this type of increase is usually regarded to be a typical thermal process. Each step in the radio flux corresponded to a variation in the Ha flare, showing that the radio and Hα emissions during this period came from the same thermal source. In this paper, we explain this behaviour in terms of Hyder's model: we think that the magnetic trough supporting the solar prominence rose for some reason, causing the prominence matter (the dark filaments) to fall along the magnetic lines and to hit the chromosphere and trigger off the flare. We give rough estimates of the energy density, the height of prominence and the infall matter at the different radio increments. We also give a qualitative explanation for the appearances of the single-peak structure in the radio burst at 0411 and the covering of the sunspot shortly after at 04 13 and propose several possible mechanisms.