Determination of the regional deformation rates of Shanghai and Kashima VLBI stations based on ITRF97

The vertical deformation rates (VDRs) and horizontal deformation rates (HDRs) of Shanghai VLBI station in China and Kashima and Kashima34 VLBI stations in Japan were re-analysed using the baseline length change rates from Shanghai to 13 global VLBI stations, and from Kashima to 27 stations and from Kashima34 to 12 stations, based on the NASA VLBI global solution glb1123 (Ma, 1999). The velocity vectors of the global VLBI stations were referred to the ITRF97 reference frame, and the Eulerian vectors of different models of plate motion were used for comparative solutions. The VDR of Shanghai station is estimated to be −1.91±0.56 mm/yr, and those of Kashima and Kashima34 stations, −3.72±0.74mm/yr and −8.81±0.84mm/yr, respectively. The difference between the last two was verified by further analysis. Similar estimates were also made for the Kokee, Kauai and MK_VLBA VLBI stations in mid-Pacific.     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

Morphological characters of the two-ribbon flare of 1981 May 13 and their explanation

We give a summary of the morphology of the two-ribbon flare of 1981 May 13. One striking feature is that the Ha flare began at about 0338' UT and the double-ribbon structure was formed about 0346, $\text{before}$ the impulsive phase of the radio 3 cm burst at 04 11 UT. The 3 cm radio burst flux beginning at 03 33 UT showed only slow, stepwise increases lasting half an hour until the impulsive phase and this type of increase is usually regarded to be a typical thermal process. Each step in the radio flux corresponded to a variation in the Ha flare, showing that the radio and Hα emissions during this period came from the same thermal source. In this paper, we explain this behaviour in terms of Hyder's model: we think that the magnetic trough supporting the solar prominence rose for some reason, causing the prominence matter (the dark filaments) to fall along the magnetic lines and to hit the chromosphere and trigger off the flare. We give rough estimates of the energy density, the height of prominence and the infall matter at the different radio increments. We also give a qualitative explanation for the appearances of the single-peak structure in the radio burst at 0411 and the covering of the sunspot shortly after at 04 13 and propose several possible mechanisms.     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

Sedimentary cycles of trace elements in Salawusu River Valley since 150 ka BP

The paper makes some analyses on 11 trace elements in the Milanggouwan stratigraphical section in the Salawusu River valley, which is regarded as a prototype geology-palaeoclimate record since 150 ka BP. The results show that the content and variation of trace elements has experienced remarkably regular changes in the pace with coarse and fine sedimentary cycles of palaeo-aeolian sands to its overlying fluvio-lacustrine facies or/and palaeosols. The trace elements with chemical properties of relatively active (V, Sr, Cu, Ni, As) and relatively stable (P, Pb, Rb, Mn, Nb, Zr) are a manifestation of the corresponding 27 changeable cycles between peak and valley values, appearing a multi-fiuctuational process line of relative gathering and migration since then. The low numerical value distribution of these two types of trace elements in the aeolian sand facies represents erosion and accumulation under wind force during the cold-dry climate. Whereas their enrichments in both fluvio-lacustrine facies and palaeosols are related to the valley’s special low-lying physiognomic position between the Ordos Plateau and the Loess Plateau under the warm and humid climate conditions. The above relatively migrated and gathered change of the trace elements is the result of 27 climatic cycles of cold-dry and warm-humid, which is probably caused by repeated alternations of winter monsoon and summer monsoon in the Mu Us Sandy Land influenced by the climate vicissitudes in northern hemisphere during glacial and interglacial periods since 150 ka BP.     

草簇状石墨烯片限域Pd纳米粒子及其催化应用(英文)

通过氨基离子液体改性石墨烯,并将其固载于堇青石表面,作为负载型Pd催化剂的载体.所制备的Pd催化剂经加氢老化后,表面石墨烯呈草簇状结构,将Pd纳米粒子限域于片层内,有效防止了Pd的流失和团聚.在重要的工业反应对羧基苯甲醛(4-CBA)加氢中,此结构催化剂与传统的钯碳催化剂相比,表现出很好的稳定性     

杭州湾大桥岩土工程勘察

文章对杭州湾大桥的勘察工作进行了全面的回顾，并对杭州湾地区地质结构作概略的介绍。     

几种空气质量预报方法的预报效果对比分析

目前应用于我国各个城市空气质量预报业务的预报方法主要有三种 :数值模式预报、统计预报和综合经验预报。这几种预报方法都有其各自的优势 ,同时也存在一些不足。应用以上方法对天津市市区进行空气质量业务预报 ,通过实测资料与预报结果进行对比分析 ,给出这几种方法在天津市区空气质量预报中的预报效果客观评价。