Models of CN and C2 comae for comet Tago-Sato-Kosaka and comet bennett

Based on the CN and C₂ comae isophotes for two comets (1961 IX and 1970 16) given by Rahe et al. and the relevant theory of physical chemistry, we have deduced the distributions of the CN and C₂ modecules in the coma, their scale heights and mean lifetimes. The results favour the viewpoint that HCN is the parent of CN, and that C₂H₂ is the parent of C₂.     

Preliminary observations of oxygen and carbon dioxide of the wintertime Bering Sea marginal ice zone

Wintertime oxygen and pH profiles across the marginal ice zone of the central and southeastern Bering Sea shelf are analyzed and compared with summer data. During the winter, at water depths shallower than 75 m, the water column is homogeneous and near freezing. Between the 75- and 200-m isobaths the structure is essentially two-layered, a cool and fresh upper layer overlying a warmer, more saline bottom layer. The oxygen concentration in the surface mixed layer is higher than the summer values, but the degree of saturation is lower because of the lower temperature in winter. The oxygen degree of saturation in the bottom mixed layer on the shelf in winter are higher than in the surface water in winter and the bottom water in summer.In summer the oxygen and carbon dioxide data show extreme variability governed primarily by biological processes. Winter oxygen and pH data, however, do not scatter as much as the summer data and indicate conservative mixing of several sub-surface water masses. The surface water is undersaturated in both oxygen and carbon dioxide and seems to absorb oxygen, but little carbon dioxide, from the atmosphere.Two stations were occupied in the Aleutian Basin. The homogeneous surface layer has the same oxygen and pH values as in the minimum temperature layer observed in the summer by other investigators at the same location. The result substantiates the hypothesis of early investigators that the summer minimum temperature layer is the remnant local winter water. All winter surface waters sampled are undersaturated with respect to oxygen, suggesting that the input of oxygen through the air-sea exchange does not keep up with the rate of upwelling and cooling, which reduces the degree of oxygen saturation. Surface carbon dioxide is also undersaturated because of cooling. The maximum temperature layer at these two Aleutian Basin stations is warmer, fresher, and contains more oxygen, but less carbon dioxide, than in the summer, suggesting advective input of some nonlocal seawater.     

Progress in Earthquake Science and Technology in China: Review and Prospects (Ⅰ)

In the article the author looks back the hard development course and great progress in earth quake science and technology in China during the last near a half of century and expounds the following 3 aspects: (1) The strong desire of the whole society to mitigate seismic disasters and reduce the effect of earthquakes on social-economic live is a great driving force to push forward the development of earthquake science and technology in China; (2) To better ensure people‘ s life and property, sustainable economic development, and social stability is an essential purpose to drive the development of earthquake science and technology in China; and (3) To insist on the dialectical connection of setup of technical system for seismic monitoring with the scientific research of earthquakes and to better handle the relation between crucial task, current scientif ic level, and the feasibility are the important principles to advance the earthquake science and technology in China. Some success and many setbacks in earthquake disaster mitigation consistently enrich our knowledge regarding the complexity of the conditions for earthquake occurrence and the process of earthquake preparation, promote the reconstruction and modernization of technical system for earthquake monitoring, and deepen the scientific research of earthquakes. During the last 5 years, the improvement and modernization of technical system for earthquake monitoring have clearly provided the technical support to study and practice of earthquake prediction and pre caution, give prominence to key problems and broaden the field of scientific research of earth quakes. These have enabled us to get some new recognition of the conditions for earthquake oc currence and process of earthquake preparation, characteristics of seismic disaster, and mecha nism for earthquake generation in China‘s continent. The progress we have made not only en courages us to enhance the effectiveness of earthquake disaster mitigation, but also provides a basis for accelerating further development of earthquake science and technology in China in the new century, especially in the 10th five-year plan. Based on the history reviewed, the author sets forth a general requirement for develop ment of earthquake science and technology in China and brings out 10 aspects to be stressed and strengthened at present and in the future. These are: upgrade and setup of the network of digitized seismic observation; upgrade and setup of the network for observation of seismic pre cursors; setup of the network for observation of strong motion; setup of the laboratories for ex periment on seismic regime; establishment of technical system for seismic information, emer gency command and urgent rescue; research on short-term and imminent earthquake predic tion; research on intermediate- and long-term earthquake prediction; research on attenuation of seismic ground motion, mechanism for seismic disaster, and control on seismic disaster; ba sic research fields related to seismology and geoscience. We expect that these efforts will signifi cantly elevate the level of earthquake science and technology in China to the advanced interna tional level, improve theories, techniques, and methods for earthquake precaution and predic tion, and enhance the effectiveness of earthquake disaster mitigation.     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

宁远保安地区基性─超基性火山岩基本特征

本文论述了保安地区火山岩的地质、岩石、副矿物、岩石化学、微量元素、稀土元素、稳定同位素、火山岩相及火山机构等特征。并对其演化规律、形成机制与成矿作用的关系，作了初步探讨。     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Soil degradation: a global problem endangering sustainable development

1 Introduction Soil is not only the major natural resource on which human being depends for the production of food, feed, fiber, renewable energy and raw materials, but also plays a key role in maintaining the complex terrestrial ecosystems and climate systems of this planet. Recent rapid increase in the human population is placing a great strain on the worlds soil resources. Only about 11% of the global land surface covered by the soils are being used to raise crops and livestock, in other …     

甲醛还原Pt/TiO2催化剂用于温和条件下高效催化氧化甲醛（英文）

通过浸渍法(IM)和沉积-沉淀(DP)法制备了一系列Pt/TiO2P25)催化剂,并分别用甲醛溶液和氢气还原处理催化剂.利用原位红外监测催化剂表面吸附物种在反应过程中的变化,探究了催化剂制备和还原条件及Pt负载量对催化剂结构和催化氧化甲醛活性的影响.结果显示,用DP法制备并用甲醛还原的Pt/P25催化剂中Pt颗粒分散均匀,并具有合适的粒径和高浓度的表面活性氧,显示出良好的甲醛氧化活性.在空速30 000 ml/(g·h)、反应温度30°C和甲醛初始浓度50 mg/m的条件下,0.4%Pt/P25(DP-HCHO)上的甲醛转化率达到98%,并能稳定运行100 h以上.相比之下,Pt/P25(DP-H2)由于表面活性氧较少,不利于甲酸盐氧化,活性较低.Pt/P25(IM-H2)虽然具有高浓度的表面活性氧,却同时具有最大的Pt颗粒粒径,在甲醛转化为甲酸盐和甲酸盐氧化两步反应中的活性均较差,因而甲醛氧化活性最差.