Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

杭州湾大桥岩土工程勘察

文章对杭州湾大桥的勘察工作进行了全面的回顾，并对杭州湾地区地质结构作概略的介绍。     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。     

碳酸岩Sr、Nd、Pb 同位素地球化学研究评述

碳酸岩是出露相对较少的幔源岩石，其中Sr与Nd是研究地幔物质组成的主要对象之一。本文统计了世界上主要碳酸岩的锶、钕、铅同位素组成特征；研究显示，碳酸岩源区主要是洋岛玄武岩高U／Pb的HIMU端员和富集端员(EM1或EM2)的混合作用；此外大部分碳酸岩的锶、钕同位素落在大洋玄武岩范围内；这些均表明其成因与地慢柱有密切联系。碳酸岩及与之共生的硅酸岩的同源或独立源区模式部很难充分解释两者同位素组成特征，逭反映碳酸岩的演化模式涉及更复杂的过程。可能是俯冲作用使碳酸岩源区经历不同时间和程度的富集、亏损过程导致地幔源区成分不均一。     

超低频电磁声源非线性动力学建模与分析

电磁声源输出力大、体积小、易于实现超低频输出,在无人反水雷作战中具有显著优势。其动力学行为受到机械回复力和电磁力的耦合作用影响,当施加电流超过坍塌电流,电磁力将超过机械回复力, 就会发生吸和,造成声源的损坏。为准确描述电磁声源非线性动力学特性,预先评估坍塌电流,建立考虑动态漏磁系数的声源非线性动力学模型。通过三维有限元仿真计算动铁芯运动到不同位置处气隙的漏磁系数, 拟合得到动态漏磁系数。根据等效磁路法建立声源的改进电磁力模型,进而建立电磁声源非线性动力学模型。 通过 Runge-Kutta 算法计算得到阶跃激励下声源振动的位移和速度,绘制相平面图。研究稳定与失稳 2 种情况下的相轨迹的动态变化规律,为电磁声源的设计和控制提供理论支撑。     

太湖表层沉积物多环芳烃的空间分布、来源及其风险

随着太湖流域社会与经济的发展,多环芳烃(PAHs)在各种环境介质中逐渐累积,污染日益严重,可能对太湖生态环境及周边人体健康构成威胁。为探究太湖沉积物PAHs的来源及生态风险,于2021年12月在太湖采集30个表层沉积物样品,利用气相色谱-质谱联用仪(GC-MS)检测样品中16种PAHs含量;利用受体模型和苯并[a]芘(BaP)毒性当量法进行来源解析及生态风险评估,并将各来源贡献与毒性当量浓度相结合,量化源风险。结果表明,太湖表层沉积物中16种PAHs总含量介于124~592 ng/g之间,平均值为294 ng/g,中值为279 ng/g;高环多环芳烃(HMW PAHs)为主要组分,占∑PAHs的67%。高含量区域位于竺山湾、梅梁湾、贡湖湾和西太湖,与国内外其他湖泊沉积物相比,太湖沉积物PAHs含量处于较低水平。源解析的结果表明,太湖表层沉积物中PAHs交通排放源贡献率为29.1%、煤炭燃烧源贡献率为26.7%、生物质燃烧源贡献率为28.7%、石油源贡献率为15.6%。生态风险评价结果表明,交通排放源、生物质燃烧源、煤炭燃烧源和石油源的BaP毒性当量含量(TEQ_BaP)均值分别为19.34、17.81、16.33和9.1 ng/g,均小于70 ng/g,几乎处于无风险水平。西太湖、贡湖湾和梅梁湾的部分区域ΣTEQ_BaP大于70 ng/g属于潜在风险区,具有一定潜在毒性。在后续的污染治理中应重点关注太湖西北部地区污染物的排放。本研究可为沉积物中PAHs污染的研究提供数据支撑,为地方政府精准、高效地管控PAHs污染提供理论依据。     

Correspondence Between Astronomical Periods and Sedimentary Cycles

The term of geological cycle was used firstly inHutton's" The Earth Theory" in 1788 (Williams,1980). The geological cycles including tectonic cycles and sedimentary cycles have been describedwidely since than. Some researchers have perceivedthat the geolo…     

深海无人系统大长径比环肋圆柱壳结构设计与试验研究

环肋圆柱壳是深海无人系统广泛采用的一种耐压结构形式,保障其结构安全是系统研制过程中非常重要的一环。针对环肋圆柱壳的结构特征推导了组合结构重量关系式和结构参数简化估算方法,并以一种超长型深海无人系统耐压结构为例,围绕大长径比环肋圆柱壳的结构形式、设计计算、仿真分析、模型验证等开展研究。研究表明提出的大长径比环肋圆柱壳结构设计参数简化估算方法具有较好的适应性。相关计算和分析结果可以为该型深海无人系统结构设计提供技术支撑,也可以为其他类似耐压结构设计提供参考。