Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

超低频电磁声源非线性动力学建模与分析

电磁声源输出力大、体积小、易于实现超低频输出,在无人反水雷作战中具有显著优势。其动力学行为受到机械回复力和电磁力的耦合作用影响,当施加电流超过坍塌电流,电磁力将超过机械回复力, 就会发生吸和,造成声源的损坏。为准确描述电磁声源非线性动力学特性,预先评估坍塌电流,建立考虑动态漏磁系数的声源非线性动力学模型。通过三维有限元仿真计算动铁芯运动到不同位置处气隙的漏磁系数, 拟合得到动态漏磁系数。根据等效磁路法建立声源的改进电磁力模型,进而建立电磁声源非线性动力学模型。 通过 Runge-Kutta 算法计算得到阶跃激励下声源振动的位移和速度,绘制相平面图。研究稳定与失稳 2 种情况下的相轨迹的动态变化规律,为电磁声源的设计和控制提供理论支撑。     

基于YOLO算法的海洋中尺度涡三维结构构建

海洋中尺度涡是一种常见的中尺度海洋现象,研究海洋中尺度涡的分布及运动特性对航运、气候、军事等具有重要作用,海洋中尺度涡的识别是海洋学和计算机科学领域的一个热门研究课题。运用深度学习的方法和框架,对中尺度涡的二维识别和三维结构构建展开研究分析。首先,获取全球海洋再分析数据并进行流线可视化,构建涡旋流线数据集;其次,利用YOLO v5s卷积神经网络对涡旋流线数据集进行训练,并对南海区域中尺度涡进行有效检测。实验结果表明,YOLO v5s训练后得到最优模型经过测试,平均检测精度均值达到了86.10%;最后,根据涡旋检测结果,对检测出的同时刻不同深度的涡旋判断是否属于同一涡旋,确定后进行该涡旋的三维结构构建。     

太湖表层沉积物多环芳烃的空间分布、来源及其风险

随着太湖流域社会与经济的发展,多环芳烃(PAHs)在各种环境介质中逐渐累积,污染日益严重,可能对太湖生态环境及周边人体健康构成威胁。为探究太湖沉积物PAHs的来源及生态风险,于2021年12月在太湖采集30个表层沉积物样品,利用气相色谱-质谱联用仪(GC-MS)检测样品中16种PAHs含量;利用受体模型和苯并[a]芘(BaP)毒性当量法进行来源解析及生态风险评估,并将各来源贡献与毒性当量浓度相结合,量化源风险。结果表明,太湖表层沉积物中16种PAHs总含量介于124~592 ng/g之间,平均值为294 ng/g,中值为279 ng/g;高环多环芳烃(HMW PAHs)为主要组分,占∑PAHs的67%。高含量区域位于竺山湾、梅梁湾、贡湖湾和西太湖,与国内外其他湖泊沉积物相比,太湖沉积物PAHs含量处于较低水平。源解析的结果表明,太湖表层沉积物中PAHs交通排放源贡献率为29.1%、煤炭燃烧源贡献率为26.7%、生物质燃烧源贡献率为28.7%、石油源贡献率为15.6%。生态风险评价结果表明,交通排放源、生物质燃烧源、煤炭燃烧源和石油源的BaP毒性当量含量(TEQ_BaP)均值分别为19.34、17.81、16.33和9.1 ng/g,均小于70 ng/g,几乎处于无风险水平。西太湖、贡湖湾和梅梁湾的部分区域ΣTEQ_BaP大于70 ng/g属于潜在风险区,具有一定潜在毒性。在后续的污染治理中应重点关注太湖西北部地区污染物的排放。本研究可为沉积物中PAHs污染的研究提供数据支撑,为地方政府精准、高效地管控PAHs污染提供理论依据。     

Correspondence Between Astronomical Periods and Sedimentary Cycles

The term of geological cycle was used firstly inHutton's" The Earth Theory" in 1788 (Williams,1980). The geological cycles including tectonic cycles and sedimentary cycles have been describedwidely since than. Some researchers have perceivedthat the geolo…     

深海无人系统大长径比环肋圆柱壳结构设计与试验研究

环肋圆柱壳是深海无人系统广泛采用的一种耐压结构形式,保障其结构安全是系统研制过程中非常重要的一环。针对环肋圆柱壳的结构特征推导了组合结构重量关系式和结构参数简化估算方法,并以一种超长型深海无人系统耐压结构为例,围绕大长径比环肋圆柱壳的结构形式、设计计算、仿真分析、模型验证等开展研究。研究表明提出的大长径比环肋圆柱壳结构设计参数简化估算方法具有较好的适应性。相关计算和分析结果可以为该型深海无人系统结构设计提供技术支撑,也可以为其他类似耐压结构设计提供参考。     

核线影像生成过程中的大图像分块问题

讨论了核线影像生成过程中的大图像分块处理问题 ,给出了按条分块的策略及其有关问题的解决方法。研究成果对其它应用中的大图像分块处理也具有一定的参考价值     

利用高分七号卫星开展1∶10000立体测图精度验证

针对当前我国1∶10000基础地理信息成果急需加快生产速度,以及基于GF-7影像的测图精度能否满足1∶10000基础地理信息成果要求还需进一步验证的现状,开展基于GF-7影像的1∶10000立体测图试验以及成果精度验证试验.试验利用外业控制资料,全面验证了利用GF-7影像生产的1∶10000数字表面模型(DSM)、数字...