载波/多普勒平滑伪距在Android手机中的定位实现

针对Android手机GNSS伪距定位精度较低的问题，利用手机端观测信息，通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量，从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法，然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型，并设计合理有效的试验对算法的精度进行评定。试验结果表明：在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度，且多普勒平滑算法表现更优；在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度，但是载波相位平滑算法较原始伪距更差；由于硬件的制约手机端周跳和信号失锁严重，占比超过50%，载波相位在手机端的可用性较低；多普勒平滑算法的最优平滑时间常数小于等于10 s，具有实时动态定位的巨大潜力。     

一种产生Fuzzy拓扑和Smooth拓扑的方法及其应用

利用邻域度给出了1种由fuzzy拓扑产生smooth拓扑的方法;利用smooth拓扑的自身结构给出了smooth拓扑产生fuzzy拓扑的方法,讨论了它们在映射间的联系并引入了强smooth拓扑并获得了一些重要结果.     

高光谱遥感数据三次光滑样条滤噪

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。     

基于光谱信息的遥感图像空间域自适应滤波

遥感图像往往由于内外因素的干扰含有各种噪声 ,为提高图像质量人们对其进行滤波。常规的滤波方式完全基于图像空间域 ,在消除异常点使图像平滑的同时使边界变得不清楚从而使图像模糊 ;或者正相反 ,在边缘信息得到增强时也放大了图像噪声而使图像变得粗糙。该文的自适应滤波方法充分利用多光谱和高光谱遥感图像的光谱维信息 ,滤波时不仅要使均匀的地块得到平滑 ,而且要使地块间的边缘、局部的异常点、线仍然得到保存、在光滑的同时尽量保持原有的数值特征     

Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading

A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd.     

Modelling the flow of self‐compacting concrete

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.     

Development and characterization of a cell line from the embryos of half smooth tongue sole (Cynoglossus semilaevis)

A new cell line,CSEC,has been successfully established from embryos at gastrula stage of a cultured marine fish,half smooth tongue sole(Cynoglossus semilaevis).CSEC cells grow actively and stably more than 50 passages for over 200 d in DMEM medium supplemented with 15% FBS(fetal bovine serum),2.5 ng/cm 3 bFGF(basic fibroblast growth factor),1 ng/cm 3 LIF(leukemia inhibitory factor) and 50 mmol/dm 3 2-ME(2-mecaptoethanol).The cells grew well in the temperature range of 24-30 ℃ and the optimal growth temperature was 24℃.FBS and bFGF concentrations are the two key components for CSEC cells proliferation.Chromosome analysis reveals that CSEC cells have a normal diploid karyotype with 2n=42t.The significant fluorescent signals were observed in CSEC after transfection with the GFP reporter gene,suggesting that the CSEC cell line can be used as a useful tool for transgenic and genetic manipulation studies.CSEC cells showed the cytopathic effect(CPE) after infection with lymphosystis disease virus(LCDV) in 2 d.Moreover,the LCDV particles can be observed in the cytoplasm of virus-infected cells by electron microscopy.It suggests that CSEC could be potentially used for the study of aquatic virus.     

用剩余信息量最小准则实现直流电测深数据的二维自动反演

自Pelton等发表第一篇直接电测深数据的二维反演文章以来，电测深数据的二维反演解释已广泛应用于资源勘探和环境监测，并取得一定效果。然而，由于该方法中加入了人为确定的平滑约束，其反演解释结果具有很大不确定性，使其在实际生产中普及应用受到限制。因此，如何在现有方法的基础上进一步改进完善成为该方法普及应用的关键。为了使反演解释结果既忠于实测数据，又合理地反映地下介质的变化，作者在本文中讨论了基于最大熵谱原理的剩余信息量最小准则实现电测深数据的二维自动反演。作者在文中还介绍了正演计算和偏导数求取中，提高精度和计算效率的技巧。用三个数值模式算例对本文的自动反演方法进行了验证。数值模拟结果表明，基于剩余信息量电小准则的二维自动反演给出的解释结果基本不受人为因素影响，能反映地下介质电阻率的详细变化。     

遗传算法中的光滑约束反演及其在青藏高原面波研究中的应用

光滑约束技术在线性反演中具有重要的作用，但在遗传算法的反演中则很难直接施加于模型参数，其原因是采用光滑处理后的模型参与迭代后，模型的多样性受到很强的压制，并在少量的迭代过程中使种群的各个模型趋向一致，从而得不到满足条件的最优解．本文给出了一种可用于遗传算法反演的间接光滑约束方法．该方法将遗传算法迭代过程中产生的模型经处理后得到的光滑模型，作为误差函数计算的输入模型．迭代过程仍采用原模型，避免了模型的多样性损失，在面波反演和接收函数反演的试验中取得了良好的效果．我们利用该方法对青藏高原地区的瑞利波相速度资料进行了反演，揭示了青藏高原中部地区S波速度结构的横向变化特征．结果表明，青藏高原北部地区地壳Ｓ波速度较南部地区低；大多数路径在15～40ｋｍ 深度范围内，存在12～25ｋｍ 厚的地壳低速层；上地幔低速层位于100ｋｍ 深度以下，厚度主要在40～80ｋｍ 范围内变化，个别路径可达100ｋｍ 以上．安多台以北、玛沁和玉树以西之间，在上地幔90～230ｋｍ 深度范围存在明显的低速层，最低速度约4.2～ 4.3km／s．根据不同路径的S波速度结构和前人的资料，我们认为印度板块的俯冲可能以雅鲁藏布缝合带附近为界．      

Smooth constraint inversion technique in genetic algorithms and its application to surface wave study in the Tibetan Plateau

IntroductionThe dispersion phenomena, which can be observed when surface wave travels through the Earth interior, has been extensively applied in investigating the velocity structure of the Earth interior. Usually, the dispersion curve is a nonlinear function of the thickness, S and P wave velocities and density of each layer. Because surface wave inversion is a multiple-minima problem, the result strongly depends on the initial model in traditional linear inversion. Genetic algorithm (GA) …