美洲斑潜蝇在湛江市的发生与防治

调查了潜蝇在湛江市的发生与为害情况，结果表明，美洲斑潜蝇（LiriomyzaSatiuaeBlanchard）是为害作物潜蝇的优势种，包括有6个科18种，年间发生有6个为害高峰期。应用绿潜宝、乐果、巴丹等药剂在发生为害高峰期的峰前、中、后三次用药，防治效果维持70％以上。     

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Φ (0.002 6 ～0.003 7 mm). The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63% and silt 37%. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from (459.12～39.03) ka to (88.92～7.56) ka. The standard deviation ranged from 0.96 to 1.36Φ, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16～0.31 with an average skewness of 0.218, (Positively skewed towards fine). Kurtosis values (0.84～1.05) from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.     

北秦岭晋宁期中酸性侵入岩带地球化学特征与构造环境

北秦岭侵入岩带中的中酸性侵入岩主要形成于晋宁旋回的中晚期阶段。主要岩石类型包括辉石闪长岩、闪长岩、石英闪长岩、英云闪长岩、花岗闪长岩、斜长花岗岩、花岗岩和钾长花岗岩。岩石化学、稀土元素和微量元素地球化学研究证明,这些岩石主要形成于B型俯冲和碰撞造山的构造环境中,而钾长花岗岩形成于后造山的伸展阶段。据此,该侵入岩带揭示了北秦岭褶皱带在晋宁旋回中晚期阶段的演化过程。     

构造因素与滑坡

本文首先简述了斜坡演化过程与构造运动的关系,然后阐明了滑坡的空间分布、活动周期及活动规模与构造因素的联系。在此基础上指出:构造因素是滑坡产生的基础,对滑坡分布具宏观控制作用,并与滑坡的活动周期和活动规模密切相关,是滑坡研究及其灾害预测、预防研究工作中值得重视的重要因素。     

On the Period Variation of the W UMa-type Contact Binary V502 Ophiuchi

The variation in the orbital period of the W UMa type contact binary V502 Oph is analyzed. The orbital period exhibits a wavelike variation with a periodicity of 23.0 years and an amplitude of △P = 1.24×10~(-6) days superimposed on secular decrease of dP/dt = 1.68×10-7 day per year. The long-term decrease may be accompanied by the contraction of the secondary at a rate of 83 m per year and a mass transfer rate from the primary to the secondary of 4.28×10~8 M per year. The short-term oscillation may be explained by the presence of a third component. Orbital elements of the third body and its possible mass are presented.     

临猗5.0级地震前后品质因子值变化特征研究

利用西安数字地震遥测台网记录的数字地震资料，采用P波初动半周期残差法求得1998年7月临猗5．0级地震前后不同路径的Q(品质因子)值变化，发现在地震发生前Q值为87～203，震后Q值为67～164，震前震中区附近出现明显的高Q值异常。结果表明，地震前的高Q值异常可以作为地震预测的一种手段。     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.     

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Microbial release of potassium from K-bearing minerals by thermophilic fungus Aspergillus fumigatus

A strain of thermophilic fungus Aspergillus fumigatus was cultured with K-bearing minerals to determine if microbe-mineral interactions enhance the release of mineralic potassium. Experiments were carried out in two settings, one with the mineral grains and the fungal cells in direct contact, and the other employing a membrane (pore size 0.22 μm) to separate the two. Measurements over a period of 30 days showed that, irrespective of the experimental setup, the concentration of free K in the culture was drastically higher than those in any of the control experiments where no living organism was present. Moreover, the occurrence of mineral-cell physical contact enhanced potassium release by an additional factor of 3 to 4 in comparison to the separation experiments. For contact experiments, Electron Probe Microanalysis revealed the formation of mycelium-mineral aggregates, and Atomic Force Microscopy imaging further indicated the possible ingestion of mineral particles by the fungus cells. Contrasting to what was observed and expected in control experiments, the potassium solubilization rate showed a positive dependence upon pH when fungi and minerals were mixed directly, and exhibited no correlations with solution acidity if cell-rock contact was restrained. These results appear to suggest that A. fumigatus promoted potassium release by means of at least three likely routes, one through the complexation of soluble organic ligands, another appealing to the immobile biopolymers such as the insoluble components of secretion, and the third related to the mechanical forces in association with the direct physical contact between cells and mineral particles.     

Flood hazard delineation combining geomorphological and hydrological methods: an example in the Northern Iberian Peninsula

Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km² of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph) in the Sarria River basin (155 km², NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number) by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling (one-phase, one-dimensional and steady flow) in a 4 km² urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both methods. Originally presented at the Sixth International Conference on Geomorphology.