Gravitational collapse and equilibrium conditions of a toroidal vortex with thermal pressure

We found the equilibrium conditions for a self-gravitating toroidal vortex by taking thermal pressure into account. These conditions are shown to significantly differ from those for a disk or a sphere. The evolution of a thin vortex turns it into a compact vortex that loses mechanical stability for low masses at a polytropic index γ<4/3 but retains stability for sufficiently high masses and densities determined by the velocity circulation in the vortex.     

澳门附近海域沉积物污染状况及特征分析

掌握澳门附近海域沉积物的污染状况及特征,对于合理安排澳门海洋海岸工程疏浚泥的海洋倾倒,防止造成海洋污染有十分重要的意义。根据1997—1999年连续三年对澳门附近主要区域的海洋沉积物采样测定结果,通过分析认为澳门附近海域沉积物污染具有下列特征:1)沉积物中重金属和油类含量普遍较高,除了总Hg外均高于珠江口海区的其他港口;2)沉积物中污染物的分布受人类活动的影响明显,澳门内港受船只排污、码头作业、陆地工业和生活污水排放的影响,是澳门附近海域沉积物污染最为严重区域;3)受水质交换的影响明显,澳门外港、路环岛东北等区域受珠江径流影响水质交换较快,沉积物中污染物的含量较低,而内港由于水质交换较差,沉积物中污染物的含量相对较高;4)与沉积物的成分组成(吸附)有关,大部分污染物与沉积物中粉砂有较好的相关性,表明粉砂对污染物质有较广泛性的吸附能力,尤其是Cu、Zn、Cd、油类、有机质。     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

实验条件对X射线衍射物相定量分析结果的影响

通过实验验证了多物相试样X射线衍射定量分析的基体效应,着重研究了参比强度K值、衍射强度、混合物各物相粒度、X射线管功率等实验条件对物相定量分析结果的影响。结果表明,物相定性分析是定量分析的前提,采用积分强度、使各物相颗粒尽可能细而且均匀、采用较高的X射线管功率以及适合的扫描速率均有利于提高物相X射线衍射定量分析的准确度。     

松辽盆地尚家—太平川地区石油地质条件及勘探方向分析

通过对尚家—太平川地区构造演化、烃源岩特征、沉积特征、储盖组合、油水关系及油藏类型和油气成藏特征的分析,研究了本区的石油地质条件,认为烃源岩具有较好的生、排烃能力,分流河道砂体为油气聚集提供较好的沉积环境,良好的储盖组合有利于油气的聚集与保存。研究区没有统一油水界面,尚家地区以岩性—构造油藏为主,太平川地区以构造—岩性油藏为主。区内扶余—杨大城子油层油气成藏受有效性圈闭、优势运移通道、过剩压力、储集条件和构造诱导作用控制。据上述认识确定了研究区下一步的勘探方向,并已在指导勘探实践中取得了较好的效果。     

A summary of the geology and oil habitat of the Eastern Flank Hydrocarbon Province of South Oman

The Eastern Flank Hydrocarbon Province borders the southeastern edge of the South Oman Salt Basin in the southern part of Oman. An intensive exploration programme by PDO over the past seven years has led to the discovery of almost 2 × 10⁹ m³ of oil with current production of some 15000 m³/d from six fields.In stark contrast to other oil habitats of the Arabian Peninsula, the main play involves rock units and geological events ranging in age from Late Precambrian to Quaternary Times, while trap development and charging are closely related to syn-tectonic salt dissolution.The principal reservoirs and seals are poorly consolidated, Palaeozoic clastics which drape, due to salt dissolution, over residual ‘cores’ principally composed of either Lower Palaeozoic sandstones (Haima Group), or Late Proterozoic carbonates (Huqf Group), or some combination of these. Oils have been geochemically correlated with algal source rocks of the Huqf Eastern Flank. Structures are considered to have been ‘charged’ from Late Mesozoic times onwards in conjunction with progressive subsurface salt removal and the onset of maturation of local source rocks. The effectiveness of ‘charging’ along the retreating salt edge is indicated by the small percentage of dry wells.Major oil zones are found in both anticlinal and truncation traps which are commonly developed around sandstone (Haima Group) cores. Oils show a wide range of characteristics but are typically heavy, early expulsion crudes, high sulphur with little associated gas. Bacterial transformation is not uncommon.Producing reservoirs mainly occur at relatively shallow depths (600–1200 m). Primary recovery factors of around 7% reflect the high density and viscosity of the Eastern Flank crudes and have initiated interest in Enhanced Oil Recovery (EOR) techniques. Two such pilot projects, involving steam and polymer flooding, are due to commence in 1984 and, if successful, will substantially increase the reserve base of these fields.     

水动力条件差异导致潮坪分形特征变化实例研究

研究区位于1964～1976年黄河由刁口流路入海时形成的三角洲潮坪.为进行石油开采在潮坪上构筑的交通设施对波浪形成了良好的屏障,水动力条件具有显著差异的屏障两侧潮坪是研究潮坪特征对水动力条件响应的天然实验场所.在屏障两侧各选择一典型区,实测地貌形态,取样品进行粒度成分分析,根据实测资料分析确定潮坪分形特征.发现水动力环境的强弱决定着潮坪的形貌、沉积物粒度分维值的变化规律.水动力环境强的一侧潮坪滩面分维值高,且随着初始计算网格宽度增大迅速降维;表层沉积物粒度分维值小,且离散性大.相反,在另一侧潮坪滩面分维值低,且随着初始计算网格宽度增大分维值无显著变化;表层沉积物粒度分维值高,且具有较好的一致性.当初始计算网格宽度增大到某个值时,两侧潮坪形貌分维值渐趋一致.在屏障两侧各沿一条与屏障大角度相交的测线取样,并各选择一点采取不同深度的样品做分析计算,发现在水动力条件弱的一侧,样品的粒度分维值表现为远离屏障逐步降维、随深度增加分维值增大的规律;相反一侧粒度分维值变化的规律性很不明显.讨论了水动力环境对潮坪分形特征影响机理.     

波浪作用下岸坡和海底平衡条件的研究

提出波浪作用下岸坡和海底动态和静态平衡条件的数学模型。在已建立的推移质泥沙体积输沙率基本关系式的基础上,根据连续方程,计算出底坡、泥沙、波浪三要素在动态和静态平衡情况下的关系式,得出反映这种关系的底坡平衡函数曲线图。用实际资料对这一函数曲线进行了验证,并对实际资料相对模型的某些差异作出解释。     

Bacterial sulphate reduction in sediments of a european salt marsh: Acid-volatile and tin-reducible products

The products of ³⁵S-sulphate reduction by sedimentary bacteria were measured at two sites in a salt marsh on the east coast of England. Non-acid-volatile products were measured, after acid-volatile sulphide was removed, by their reduction to sulphide by digestion with tin. The proportion of the sulphate reduced to tin-reducible products varied between 25% in a salt marsh pan and 61% in creek sediment, over a 0–25 cm depth profile. There were also variations with depth at each site in the proportions of sulphate reduced to tin-reducible products. Further examination revealed differences in the proportions of sulphate which were reduced to free sulphide, acid-volatile sulphide, sulphur or pyrite at the two sites. The data suggest that previous work which did not measure non-acid-volatile products underestimated sulphate reduction rates by three-fold in the creek site, but by only one third in the pan.