A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

PS测井在机场隧道地基勘查中的应用

PS测井技术是地震勘探方法之一,也是一种简便、快速、准确的原位测试技术。该文介绍了单孔法PS测井的原理及其在铁路工程勘察中的应用,主要包括根据等效剪切波,进行建筑抗震场地类别划分,铁路工程抗震场地类别划分。根据岩土动力学参数,达到评价岩体质量和划分围岩类别目的,利用剪切波速法估算岩土的承载力基本值。通过青岛机场隧道场地的工程实例说明了PS测井技术在岩土工程勘察设计中的应用情况及应用效果。     

用双三次样条函数和GPS资料反演现今中国大陆构造形变场

将中国大陆现今构造变动视为一种连续的地壳变形,利用双三次样条函数模拟了近期GPS测定的大陆内部及周边地区412个测站速率,反演大陆地区自洽的构造变动速度场和应变率场.模拟结果显示:印度板块与欧亚板块的碰撞、挤压是构成中国大陆内部岩石层水平形变的主要驱动力.印度板块在东喜马拉雅构造结深深插入青藏高原,造成地壳大规模的缩短和抬升.青藏高原东南部的喜马拉雅带、拉萨和羌塘地块以及青藏高原东南边的川滇地区,内部构造活动强烈,其内部的构造变形包含地壳碎片的冲断、褶皱和侧向逃逸.大陆地壳(或岩石圈)的增厚,尤其是喜马拉雅山脉南北向的快速缩短和青藏高原东西向的缓慢拉张,大约吸收了印欧板块会聚量的85%,西藏中东地区东西向的拉张速率达到了(16±2.0)mm/a,且顺时针方向扭转明显.印度板块相对欧亚板块运动的欧拉极为(29.7°N, 19.3°E, 0.392°/Ma);华南地块相对于欧亚大陆向东(102°±7.4°)南的运动速率是(11±1.54)mm/a,华南块体相对欧亚板块运动的欧拉极为(62.25°N, 126.56°E, 0.141°/Ma);塔里木地块相对较稳定,其西部运动速度高于东部运动速度,作顺时针方向旋转.总体上讲,中国大陆运动方向为北偏东呈辐射状,从西部近南北方向的运动转向东部地区东南方向的运动,绕东喜马拉雅构造结有一顺时针方向的旋转.横穿喜马拉雅构造带及青藏内部的南北向压缩速率为(19±2.0)mm/a,横穿西天山构造带的南北向压缩平均速率为(13±1.5)mm/a,横穿东天山构造带的南北向压缩平均速率为(6.0±1.4)mm/a.阿尔金断裂带的左旋走滑速率为(6±1.2)mm/a.     

An approximate method for evaluating the shear band thickness in saturated soils

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.     

昆仑山8.1级地震前中国大陆的构造应变背景

利用“网络工程”1998～2001年累积的1181个测站的GPS重复观测资料，采用双三次样条函数模型建立中国大陆水平运动模型速度场，用大地坐标在椭球面上计算各类应变场，详细分析了2001年昆仑山8．1级地震前中国大陆水平构造应变场空间分布特征。各类构造应变场的最高值都出现在喜马拉雅构造带与昆仑山地块内(地震断裂带南侧)，鲜水河—安宁河断裂带次之。分析表明，昆仑山8．1级地震正好发生在张性面膨胀应变率的高值区，第一、第二和最大剪应变率高值区边缘的突变区和最大、最小主应变率的高值区。     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

浙西北江山─绍兴断裂带构造演化特征

江山—绍兴断裂带是中国南方最重要的构造带之一。它是江南陆块与华夏陆块神功运动形成的碰撞拼贴带。它表现出明显的多期变形、构造叠加的特征：神功运动形成近东西向平卧褶皱；印支运动沿断裂带有向北西强烈的推覆挤压。断裂带不同时期的活动反映了不同特征的构造环境，形成不同的构造变形特征，并对两侧的地质历史具有明显的控制作用。     

北秦岭晋宁期中酸性侵入岩带地球化学特征与构造环境

北秦岭侵入岩带中的中酸性侵入岩主要形成于晋宁旋回的中晚期阶段。主要岩石类型包括辉石闪长岩、闪长岩、石英闪长岩、英云闪长岩、花岗闪长岩、斜长花岗岩、花岗岩和钾长花岗岩。岩石化学、稀土元素和微量元素地球化学研究证明,这些岩石主要形成于B型俯冲和碰撞造山的构造环境中,而钾长花岗岩形成于后造山的伸展阶段。据此,该侵入岩带揭示了北秦岭褶皱带在晋宁旋回中晚期阶段的演化过程。     

超基性岩中含铜、钴块状硫化物矿床——德尔尼铜矿成因新认识

长期以来对德尔尼铜矿的成因存在着不同认识。从矿石组成和结构、构造来看,应属典型的块状硫化物矿石,矿床亦应属于含铜黄铁矿型矿床。但从其地质产状来看又与一般的黄铁矿型矿床大不相同,与一般的岩浆熔离铜镍硫化物矿床也有较多差异。这就是本矿床类型独特之处。近年来通过工作又取得一些新资料,特别是超基性岩和矿石的同位素年龄数据。本文在综合新老资料基础上,提出新看法,认为该矿床形成于上地幔,再就位于地壳浅部。其成因类型暂定为:“深部熔离—构造侵位矿床”。鉴于本矿床与一般块状硫化物矿床相比有其独特性,建议命名为“德尔尼型”。     

南海北缘北东东向构造活动性研究

从地形地貌特征、重磁地球物理场、深部构造与断裂构造以及地震活动、震源机制等多方面论述北东东向构造是南海北缘的主要活动构造。对于长期以来认为新华夏系北东向构造是该区主要活动构造的观点来说，这是一种新的学术思想。