Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

Quantitative 3D imaging of partially saturated granular materials under uniaxial compression

Acta Geotechnica - Gauging the mechanical effect of partial saturation in granular materials is experimentally challenging due to the very low suctions resulting from large pores. To this end, a...     

Strain fields and mechanical response of a highly to medium fissured bentonite clay

This article presents the developments of an ongoing research aimed at modelling the influence of fissuring on the behaviour of clays. In particular, it recalls the main results of an extensive laboratory investigation on a fissured bentonite clay from the south of Italy and presents the data of a new investigation on the evolution with shearing of the strain fields developing within the clay, resulting from Digital Image Correlation (DIC). Element test results are analysed in the framework of continuum mechanics and linked to the clay fissuring features, once characterised using the Fissuring IDentity (F‐ID) chart. This article compares the bentonite behaviour with that of other fissured clays of different F‐IDs, highlighting the common behavioural features. Thereafter, the soil response at the macro level is related to the DIC‐derived strain fields evolving within the clay with loading. For this purpose, DIC was successfully used to investigate the deformation processes active in the fissured clay and the sources of the localisation phenomena. DIC is shown to provide indications of the extent to which highly to medium fissured clays element test results can be of use to model the clay behaviour according to continuum mechanics. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal decay of carbonate dimension stones: fabric,physical and mechanical changes

This paper deals with the effects of thermal stresses on selected carbonate rocks used as dimension stones. They are Mesozoic calcareous and dolomitic rocks cropping out in Apulia (southern Italy) that, for their physico-mechanical and aesthetic properties, have always been finding a large application both as ornamental stones and as simple construction materials; their use is attested not only in Italy, in works of archaeological, historical and artistic interest too. The cause–effect relationships of thermal degradation were studied by means of an artificial accelerated ageing test, in order to provide a perspective about the decay of carbonate stones due to diurnal and seasonal temperature fluctuations, as well as thermal shocks during events of fire development. The stone samples were subjected to thermal cycles in a muffle furnace, ranging from 100 to 700 °C; after each cycle, several non-destructive and semi-destructive tests were carried out: mass and volume measurements, mercury intrusion porosimetry, sclerometer tests, ultrasonic tests, thin-section observations and determination of chromatic alterations through image analysis and Munsell charts method. In this way, the qualitative and quantitative modifications induced in fabric, physical and mechanical properties were discussed. The results highlight the fundamental role of depositional and diagenetic fabric that, together with mineralogical composition, represents the most significant discriminating factor in the response of the stone to thermal stresses.     

Numerical modelling of installation effects for diaphragm walls in sand

The scopes of this work are to study the mechanisms of load transfer and the deformations of the ground during slurry trenching and concreting in dry sand and to evaluate their effects on service structural loads, wall deflections and ground displacements behind the wall caused by subsequent excavation. A series of three-dimensional finite element analyses was carried out modelling the installation of diaphragm walls consisting of panels of different length. The soil was modelled as either linearly elastic-perfectly plastic or incrementally non-linear (hypoplastic) with elastic strain range. Plane strain analyses of diaphragm walls of identical cross section were also carried out in which wall installation was either modelled or the wall was wished in place (WIP). The analyses predict ground movements consistent with the experimental observations both in magnitude and trend. The results also show that the maximum horizontal wall deflections and structural loads reduce with increasing panel aspect ratio towards a minimum which is about twice the value computed for WIP analyses. Panel aspect ratios should be larger than about three to take advantage of the three-dimensional effects. The pattern and magnitude of surface vertical displacements obtained from linearly elastic-perfectly plastic analyses, no matter whether three- or two-dimensional, are unrealistic.     

Displacements induced by the installation of diaphragm panels

The walls of a deep excavation in cohesionless soils below the water table have been supported by a reinforced concrete diaphragm with T-shaped panels. To improve the safety against the risk of local collapse during the panel excavation, the soil surrounding the panels has been treated by deep mixing to a depth of 6?C10?m. The horizontal displacements, induced in the surrounding soil by the installation (deep mixing, slurry supported excavation, placing of the reinforcement cage, concrete casting and curing) of the diaphragm, have been measured by means of inclinometers. It is claimed that they can be a significant fraction of the total displacements induced by the excavation. A back analysis of the observed displacements shows that the deformation process is essentially elastic and can be satisfactorily modelled provided the values of the soil stiffness are properly selected.     

Multi-scale morphological descriptors from the fractal analysis of particle contour

Acta Geotechnica - The increasing understanding of the connection between particle morphology and mechanical behaviour of granular materials has generated significant research on the quantitative...     

An Innovative Approach to Meteorite Analysis by Laser‐Induced Breakdown Spectroscopy

An innovative approach of double pulse laser‐induced breakdown spectroscopy (DP‐LIBS) coupled with optical microscopy was applied to the characterisation and quantitative analysis of the Agoudal iron meteorite in bulk sample and in petrographic thin section. Qualitative analysis identified the elements Ca, Co, Fe, Ga, Li and Ni in the thin section and the whole meteorite. Two different methods, calibration‐free LIBS and one‐point calibration LIBS, were used as complementary methodologies for quantitative LIBS analysis. The elemental composition data obtained by LIBS were in good agreement with the compositional analyses obtained by traditional methods generally applied for the analysis of meteorites, such as ICP‐MS and EDS‐SEM. Besides the recognised advantages of LIBS over traditional techniques, including versatility, minimal destructivity, lack of waste production, low operating costs, rapidity of analysis, availability of transportable or portable systems, etc., additional advantages of this technique in the analysis of meteorites are precision and accuracy, sensitivity to low atomic number elements such as Li and the capacity to detect and quantify Co contents that cannot be obtained by EDS‐SEM.