甘新蒙北山地区成矿带划分和基本特征对比

在对甘新蒙北山地区成矿地质背景和成矿在时空上的联系性等综合研究分析基础上,运用新理论、新认识,以板块构造单元划分为基础,将本区划分为3个Ⅲ级成矿带、11个Ⅳ级成矿带,并对Ⅲ级成矿带特征进行了阐述,以期为矿产勘查和地质大调查工作部署提供新的思路和依据。进一步就主要矿床(点)、构造单元、矿种、赋矿建造、控矿因素、成矿类型、成矿时代等方面进行了对比,认为各Ⅳ级成矿带在区域上具有相对稳定的展布范围,具有相同的构造环境和成矿条件、类似的矿种和成矿时代,存在一定的相似性、可比性,并且各成矿带具有一定的潜在找矿价值。     

胶辽鲁西徐淮地区新元古代地层多重划分对比

依据岩性组合、古生物特征及地震事件层研究，对胶辽鲁西徐淮地区新元古代地层可作如下多重划分对比：鲁西黑山官组、二青山组分别与辽东的钓鱼台组，南芬组相当，胶东豹山口组可与南芬组对比，它们同属青白口系。辽东南关岭组下部、鲁西石旺庄组下部、苏皖北部贾园组、淮南九里桥组皆为一套砂灰岩组合，都发育第一期地震事件层，并开始含有后生动物化石，为等时地层单位，与其以上各前寒武岩石地层单位同属灯影峡阶，鲁西的佟家庄组、浮来山组可分别与辽东桥头组、长岭子组、胶东辅子夼组、南庄组、苏皖北部兰陵组一城山组、淮南伍山组一四十里长山组对比，归属《中国区域年代地层(地质年代)表》新划分的陡山陀阶。     

中国大陆科学钻探先导孔零偏VSP资料解释

用六级三分量检波器在中国大陆科学钻探先导孔中实施了零偏VSP测量.数据处理结果表明,中国大陆科学钻探孔区超高压变质岩石的地震波速度主要介于4500～7000m/s之间,显著高于一般的沉积岩地区,而且随深度变化不明显.声波测井速度系统地稍低于VSP层速度,可能是由于井壁处岩石的完整性受到破坏而造成的.地震波速度与岩石密度和岩性存在明确的对应关系,榴辉岩的密度和地震波速度均显著高于片麻岩类岩石;由榴辉岩退变生成的斜长角闪岩类岩石,其密度和地震波速度均呈现出较大的变化,主要与其退变质程度有关;超基性岩中的裂隙系统导致其密度和地震波速度大幅度下降.由于榴辉岩与其他岩石类型之间存在较大的波阻抗差异,因此用零偏VSP资料标定该区地震波的地质层位是有效的.关于地震波反射的原因,通过综合研究地震波(包括反射纵波、上行转换横波、井筒波)的特征、岩石速度和密度分布以及井径变化,认为主要是岩性分界面、韧性剪切带和断裂(带),但还有一些因素尚待进一步研究.     

EMERGY ANALYSIS OF GRAIN PRODUCTION SYSTEM IN JIANGSU AND SHAANXI PROVINCE

1INTRODUCTIONGrain production has always been top-priority issue con-cerned by government and people (MA etal., 2002). Af-ter China put household contract responsibility system in force, its domestic issue of grain was basically settled in the mid 1980s (MA and XU, 1999). However, in the days when idea of sustainable development is broadly accepted, efficiency and sustainability of grain produc-tion are now in question, which have prompted interest in reviewing grain production patterns…     

概率赋范空间的S-凸和K-凸

文献[1][2]认为M－PN空间是局部凸的。通过定理说明这个结论对t-模T（a,b)≥min(a,b)时成立。又通过反例表明，当t-模型T（a,b)=max(a b-1,0）时无论邻域Nθ（ε，λ）概率有界还是概率半有界结论均不成立。还讨论了Takahashi凸性并对S－凸和K－凸作了比较。     

富氏谱分析法模拟地壳垂直运动的地学依据及其策应力模型

应用地壳波浪与镶嵌构造学说对富氏谱分析法提取地壳垂直形变信息的科学性做了地质学意义上的阐释 ,并提出了根据多期形变资料提取特定波段上构造策应力的数学模型     

流动VLBI站氢原子钟的研制与性能测试

氢脉泽是射电天文所必需的频率标准.文中对为流动vLBI站研制的新一代氢脉泽的物理结构特点进行了讨论，包括对腔泡结构、磁屏蔽、原子束光学系统等.同时性能测试表明在80秒到1天之间频率稳定度优于1×10     

Optical Flash of GRB 990123: Constraints on the Physical Parameters of the Reverse Shock

The optical flash accompanying GRB 990123 is believed to be powered by the reverse shock of a thin shell. With the best-fit physical parameters for GRB 990123 and the assumption that the parameters in the optical flash are the same as in the afterglow, we show that: 1) the shell is thick rather than thin, and we have provided the light curve for the thick shell case which coincides with the observation; 2) the theoretical peak flux of the optical flash accounts for only 3×10~-4 of the observed. In order to remove this discrepancy, the physical parameters, the electron energy and magnetic ratios, εe and εB, should be 0.61 and 0.39, which are very different from their values for the late afterglow.     

Silicon limitation on primary production and its destiny in Jiaozhou Bay, China——Ⅳ：Study on cross-bay transect from estuary to ocean

The authors analyzed the data collected in the Ecological Station Jiaozhou Bay from May 1991 to November 1994, including 12 seasonal investigations, to determine the characteristics, dynamic cycles and variation trends of the silicate in the bay. The results indicated that the rivers around Jiaozhou Bay provided abundant supply of silicate to the bay. The silicate concentration there depended on river flow variation. The horizontal variation of silicate concentration on the transect showed that the silicate concentration decreased with distance from shorelines. The vertical variation of it showed that silicate sank and deposited on the sea bottom by phytoplankton uptake and death, and zooplankton excretion. In this way, silicon would endlessly be transferred from terrestrial sources to the sea bottom. The silicon took up by phytoplankton and by other biogeochemical processes led to insufficient silicon supply for phytoplankton growth. In this paper, a 2D dynamic model of river flow versus silicate concentration was established by which silicate concentrations of 0.028–0.062 μmol/L in seawater was yielded by inputting certain seasonal unit river flows (m³/s), or in other words, the silicate supply rate; and when the unit river flow was set to zero, meaning no river input, the silicate concentrations were between 0.05–0.69 μmol/L in the bay. In terms of the silicate supply rate, Jiaozhou Bay was divided into three parts. The division shows a given river flow could generate several different silicon levels in corresponding regions, so as to the silicon-limitation levels to the phytoplankton in these regions. Another dynamic model of river flow versus primary production was set up by which the phytoplankton primary production of 5.21–15.55 (mgC/m²·d)/(m³/s) were obtained in our case at unit river flow values via silicate concentration or primary production conversion rate. Similarly, the values of primary production of 121.98–195.33 (mgC/m²·d) were achieved at zero unit river flow condition. A primary production conversion rate reflects the sensitivity to silicon depletion so as to different phytoplankton primary production and silicon requirements by different phytoplankton assemblages in different marine areas. In addition, the authors differentiated two equations (Eqs. 1 and 2) in the models to obtain the river flow variation that determines the silicate concentration variation, and in turn, the variation of primary production. These results proved further that nutrient silicon is a limiting factor for phytoplankton growth. This study was funded by NSFC (No. 40036010), and the Director's Fund of the Beihai Sea Monitoring Center, the State Oceanic Administration.     

断层相关褶皱理论在准噶尔盆地南缘山前带构造研究的应用

利用断层相关褶皱的构造几何分析方法，对准噶尔盆地南缘山前复杂构造带内基于地震剖面进行了构造解析，搭建了中、东段的构造轮廓和构造组合样式，认为东段阜康断裂带主要表现为至地表的推覆逆掩。由于位移量大部分转移至地表，阜康断裂带的前陆部分无喜山期构造带；西段造山带内的挤压往前陆方向传递过程中以前列式不断释放其位移量，造成在纵向上呈现三排主要的断层相关褶皱带。根据正演平衡地质剖面制作技术对山前复杂构造区地震剖面反射波的构造识别进行了模拟与探讨。