Numerical simulation of random wave slamming on structures in the splash zone

The numerical investigation of random wave slamming on superstructures of marine structures in the splash zone is presented in this paper. The impact pressures on the underside of the structure are computed based on the improved volume of fluid method (VOF). The governing equations are Reynolds time-averaged equations and the two equation k– model. The third order upwind difference scheme is applied to the convection term to reduce the effect of numerical viscosity. The numerical wave flume with random wave-maker suitable for VOF is established. Appropriate moving contact-line boundary conditions are introduced to the model wave in contact with and separated from the underside of structure. Parametric studies have been carried out for different incident waves, structure dimensions and structure clearance. The numerical results are verified by the experimental results.     

Size-Fractionated Primary Production Estimated by a Two-Phytoplankton Community Model Applicable to Ocean Color Remote Sensing

In order to estimate primary production from ocean color satellite data using the Vertical Generalized Production Model (VGPM; Behrenfeld and Falkowski, 1997), we propose a two-phytoplankton community model. This model is based on the two assumptions that changes in chlorophyll concentration result from changes of large-sized phytoplankton abundance, and chlorophyll specific productivity of phytoplankton tends to be inversely proportional to phytoplankton size. Based on the analysis of primary production data, P _opt ^B , which was one parameter in the VGPM, was modeled as a function of sea surface temperature and sea surface chlorophyll concentration. The two-phytoplankton community model incorporated into the VGPM gave good estimates in a relatively high productive area. Size-fractionated primary production was estimated by the two-phytoplankton community model, and P _opt ^B of small-sized phytoplankton was 4.5 times that of large-sized phytoplankton. This result fell into the ranges observed during field studies.     

中国黄、渤海常见大型海藻的脂肪酸组成

对中国黄、渤海沿岸的17种红藻、12种褐藻、7种绿藻的脂肪酸组成进行了分析研究，结果表明，黄海和渤海的绝大多数红都富含二十碳高度不饱和脂肪酸（主要是二十碳五烯酸，EPA和二十碳四烯酸，AA），一般都占总脂肪酸的40％以上；仙菜目的松节藻、细枝软骨藻，隐丝藻目的亮管藻、海萝、海膜、蜈蚣藻中的EPA含量均超过40％，其中海萝达到58％；杉藻目扁江蓠中EPA含量很低，但花生四烯酸含量达到58％。裸藻中16：0、18：1（n-9)、20：4（n-6)和20：5（n-3)含量占绝对优势，十八碳高度不饱和脂肪酸（PUFAs)和二十碳PUFAs是主要的脂肪酸。在每种褐藻中还含有一定量的14：0、18：2（n-6)和18：4（n-3)。褐藻中的十八碳PUFAs含量比红藻高，而二十碳PUFAs比红藻低。绿藻中的主要脂肪酸是16：0、十六碳高度不饱和脂肪酸（主要是：16：4（n-3)和16：3（n-3)、18：1以及C18PUFAs（主要包括18：2（n-6),18:3(n-3)和18：4（n-3)，绿藻的C16、C18PUFAs含量较高。     

山东沿海海藻抗肿瘤活性的筛选

于1997年4月和2000年5月对山东沿海海藻进行较系统的采集，对其中39种海藻的96个样品采用高通量方法进行选择性细胞毒筛选，结果表明，小粘膜藻（Leathesia dif-formes)、多管藻（Polysiphonia urcedata)、萱cytosiphon lomentarius)、海萝（Gloiopeliis fur-cata)、叉开网翼藻（Dictyopteris diuaricata)、点叶菜（Punctaria latifolia)等对KB细胞或HT-29细胞具有选择性抑制活性。局醇、氯仿的提取效率较高，多管藻的乙醇、氯仿提取物，萱藻的乙醇提取物和叉开网翼藻的正己烷提取物都有强的选择性细胞毒活性。     

波浪作用下孔隙海床-管线动力相互作用分析

波浪作用下海床中的孔隙水压力与有效应力是影响海底管线稳定性的主要因素。然而,在目前的海床响应分析中一般将管线假定为刚性,并不能合理地考虑海床与管线之间的相互作用效应,同时也没有考虑土体和管线加速度对海床动力响应的惯性影响,从而无法确定由此所引起的管线内应力。为此考虑管线的柔性,分别采用饱和孔隙介质的Biot动力固结理论和弹性动力学理论列出了海床与管线的控制方程,进而采用摩擦接触理论考虑海床与管线之间的相互作用效应,基于有限元方法建立了海床-管线相互作用的计算模型及其数值算法。通过变动参数对比计算讨论了管线几何尺寸、海床土性参数对波浪所引起的管线周围海床孔隙水压力和管线内应力的影响。     

Adjustment time of the first baroclinic Rossby wave in the global oceans

1Introduction Planetary waves involve the main processes bywhich perturbation signal in one part of the ocean istransferred to another part.In the1970s,mostof theprevious theoretical studies focus on the local Ekmanpumping and the nondispersive long baroc…     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

Long-term Sensor Drift Found in Recovered Argo Profiling Floats

We recovered three Argo profiling floats after 2 to 2.5 years of operation, and recalibrated their temperature, conductivity, and pressure sensors. The results demonstrate that these floats exhibited a significant drift in salinity of −0.0074 to −0.0125, primarily due to the conductivity sensor drift. Combined with the recalibration result for another previously recovered float, the indication is that the negative salinity drift increases nearly in proportion to the operating period of floats. The increasing rate is −0.0041 (±0.0015) year⁻¹, which yields a salinity drift of −0.016 (±0.006) for the expected float lifetime of four years. The present result suggests that reducing the float surfacing time would improve the accuracy of the salinity measurements.     

赤道暖池区漂流浮标运动轨迹分析

TOGA—COARE强化观测期间,对赤道暖池区海流作了多种方法、多层次的观测;根据美国释放的漂流浮标不同时刻位置的资料,分别对赤道及其南、北海域的表层漂流状况作了计算分析,指出:从1°N向北存在单一的北向流;从1°N～1°S这个近赤道区域内为东向流;1°N～2°S区域为过渡区,以东向流为主,个别浮标出现涡旋状运动。2°S以南为一反时针运动的大涡旋。     

Simple determination of dimethylsulfide (DMS) and dimethylsulfoniopropionate (DMSP) using solid-phase microextraction and gas chromatography-mass spectrometry

Solid-phase microextraction (SPME) is a simple, sensitive and less destructive method for the determination of dimethylsulfide (DMS) in seawater. Combined with detection by gas chromatography-mass spectrometry (GC-MS), the method had sufficient sensitivity (minimum detectable concentration of DMS was 0.05 nM), and practical levels of reproducibility (relative standard deviation ≤7%) and linearity (r ² > 0.995) over a wide concentration range (0.5 to 910 nM). The protocol developed was applied to a Sagami Bay water sample to determine concentrations of DMS and DMSP, and in situ DMSP-lyase activity.