虚拟仪器在天气雷达发射机脉冲测试中的应用

随着我国新一代天气雷达（CINRAD）的广泛布网,雷达的维修维护工作显得日益繁重。利用虚拟仪器测试系统对雷达重要参数指标测试是一种便捷有效的方式。本文从发射机射频脉冲包络以及其测量方法的介绍出发,搭建一套基于PXI(PCI eXtensions for Instrumentation)模块化仪器的虚拟仪器系统,采用LabVIEW(Laboratory Virtual Instrument Engineering Workbench)软件编程实现参数测试测量功能,通过实验完成了对脉冲包络的重要参数测试。虚拟仪器测试系统与传统仪器对比测量结果,验证了该测试系统的可靠性。     

新驿煤矿下组煤矿井涌水量预测研究

在系统收集水文地质资料的基础上,运用"大井法"和水文地质比拟法对开采16煤的涌水量进行了预测,利用突水系数法,对八采区16煤底板奥灰突水危险性进行了评价,得出了突水系数分区图。经综合分析对比,采用大井法的预测结果:即开采16煤正常涌水量为482m3/h,最大涌水量为540m3/h;奥灰突水量初期为1 083～10 640m3/h,一般为660～4470m3/h;如对奥灰采取疏排降压方案,疏降排水量预计为770m3/h。此结果可作为矿井回采阶段防治水设计的参考。     

血管介入手术中的柔性虚拟力触觉系统研究

随着微创手术的发展,虚拟手术的应用前景越来越广阔.力反馈作为虚拟手术的核心技术,其实现的效果直接影响了虚拟手术的沉浸感.通过对经典包围盒碰撞检测算法进行研究比对,选择了球包围盒的碰撞检测算法,并建立了精确的反馈力计算模型,实现了介入血管中的柔性碰撞仿真.该仿真具有很高的实时性和精度.     

仿示波器显示在长周期MT测深仪中的应用

MTU-5、V8、LEMI-417等大地电磁测深仪器的人机交互方式均基于文字,用户仅凭文字难以发现采集中的问题。由于示波器能把人眼无法直接捕捉到的电信号的时变规律以可见的图像形式显示出来,故将该技术应用于长周期大地电磁测深仪CLP中,使仪器的人机交互方式基于图形用户界面(GUI)。本系统的GUI选用Visual C++6.0作为开发工具,在规划了显示区域,建立了设备环境类CDC以及CPen、CBitmap等绘图工具类的对象后,设计了仿示波器界面,在示波器界面中,用MoveTo与LineTo函数实现了对采集数据的实时动态显示。此外,使显示窗口自适应显示器分辨率属性、信号最大化显示、显示背景设置为灰白色,以方便操作。经野外试验,该显示技术有助于用户对采集的数据进行分析,为下一步工作提供依据。     

地理信息可视化新技术综述与分析

随着技术的发展,新的地理信息可视化技术不断涌现。本文对目前地理信息可视化技术研究中较热点的四种地理信息可视化新技术进行了介绍,并分析了各技术的不足,希望能对相关的研究有所裨益。     

Simulation of hydraulic fracture propagation near a natural fracture using virtual multidimensional internal bonds

A virtual multidimensional internal bond (VMIB) model developed to simulate the propagation of hydraulic fractures using the finite‐element method is formulated within the framework of the virtual internal bond theory (VIB) that considers a solid as randomized material particles in the micro scale, and derives the macro constitutive relation from the cohesive law between the material particles with an implicit fracture criterion. Hydraulic pressure is applied using a new scheme that enables simulation of hydraulically driven cracks. When the model is applied to study hydraulic fracture propagation in the presence of a natural fracture, the results show the method to be very effective. It shows that although the in situ stress ratio is the dominant factor governing the propagation direction, a natural fault can also strongly influence the hydraulic fracture behavior. This influence is conditioned by the shear stiffness of the fault and the distance to the original hydraulic fracture. The model results show that when the fault is strong in shear, its impact on hydraulic fracture trajectory is weak and the hydraulic fracture will likely penetrate the fault. For a weak fault, however, the fracture tends to be arrested at the natural fault. The distance between the fault and the hydraulic fracture is also important; the fault influence increases with decreasing distance. The VMIB does not require selection of a fracture criterion and remeshing when the fracture propagates. Therefore, it is advantageous for modeling fracture initiation and propagation in naturally fractured rock. Copyright © 2010 John Wiley & Sons, Ltd.     

Temporal electronic structure of non-resonant Raman excited virtual state of P-nitroaniline by 514 nm excitation via bond polarisabilities

We have studied the temporal bond polarisabilities of para-nitroaniline from the Raman intensities by the algorithm proposed by Wu et al. in 1987 (Tian B, Wu G, Liu G 1987 J. Chem. Phys. 87 7300). The bond polarisabilities provide much information concerning the electronic structure of the non-resonant Raman excited virtual state. At the initial moment by the 514.5 nm excitation, the tendency of the excited electrons (mapped out by the bond polarisabilities) is to spread to the molecular periphery, and the electronic structure of the Raman virtual state is close to the pseudo-quinonoidic state. When the final stage of relaxation is approached, the bond polarisabilities of those peripheral bonds relax faster than those closer to the molecular core, the phenyl ring. The molecule is in the benzenoidic form as demonstrated by the bond polarisabilities after relaxation.     

A virtual experiment technique on the elementary behaviour of granular materials with discrete element method

Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd.     

Approach to modeling and virtual-reality-based simulation for plant canopy lighting

Over the past 20 years, significant progress has been made in virtual plant modeling corresponding to the rapid advances in information technology. Virtual plant research has broad applications in agronomy, forestry, ecology and remote sensing. As many biological processes are driven by light, it is the key for virtual plant to estimate the light absorbed by each organ. This paper presents the radiance equation suitable for calculating sun and sky light intercepted by plant organs based on the principles of the interaction between light and plant canopy firstly; analyzes the process principles of plant canopy primary lighting based on ray casting and projection secondly; describes the multiple scattering of plant lighting based on Monte Carlo ray tracing method and on the radiosity method thirdly; and confirms the research with 3D visualization based on Virtual Reality Modeling Language （VRML） finally. The research is the primary work of digital agriculture, and important for monitoring and estimating corn growth in Northeast China.     

Cloning and Characterization of Glyceraldehyde-3-phosphate Dehydrogenase Encoding Gene in Gracilaria/Gracilariopsis lemaneiformis

Glyceraldehyde-3-phosphate dehydrogenase （GAPDH） plays important roles in various cellular processes. A cytosolic GAPDH encoding gene （gpd） of Gracilaria/Gracilariopsis lemaneiformis was cloned and characterized. Deduced amino acid sequence of the enzyme of G. lemaneiformis had high homology with those of seven red algae. The 5＇-untranslated regions of the GAPDHs encoding genes of these red algae varied greatly. GAPDHs of these red algae shared the highly conserved glyceraldehyde 3-phosphate dehydrogenase active site ASCTTNCL. However, such active site of Cyanidium caldarium was different from those of the other six algae at the last two residues （CL to LF）, thus the spatial structure of its GAPDH active center may be different from those of the other six. Phylogenetic analysis indicated that GAPDH of G. lemaneiformis might have undergone an evolution similar to those of Porphyra yezoensis, Chondrus crispus, and Gracilaria verrucosa. C. caldarium had a closer evolutionary relationship with Cyanidioschyzon merolae than with Cyanidium sp. Virtual Northern blot analysis revealed that gpd of G. lemaneiformis expressed constitutively, which suggested that it might be house-keeping and could be adapted as an inner control in gene expression analysis of G. lemaneiformis.