Petrographic and mineralogical study of hydrothermal alteration of the Rokko Granite at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line in western Japan

Field, hand specimen, and microscopic investigations alongside X-ray diffraction analyses revealed four types of hydrothermal alteration (Type-A, -B, -C, and -D) based on the mode of occurrence of altered rocks and alteration mineral assemblage at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line (ATTL) in western Japan. Type-A alteration locally occurred as gray alteration halos with sulfide minerals. Type-B and -C alterations were confined to fault gouge veins and occurred as greenish-gray veins and brown veins, respectively. Type-C alteration crosscut Type-B alteration. These alterations were associated with a number of granitic fragments including cohesive breccia and micrographic facies. Type-D alteration occurred locally in brown sediments. Different mineralogical features in the four alterations are summarized as (Type-A) illite; (Type-B) chlorite; (Type-C) limonite (Fe³⁺ hydroxides and goethite) and calcite; and (Type-D) limonite. We propose that the alterations can be broadly divided into Paleocene hydrothermal alteration (Type-A) and post-Late Miocene hydrothermal alteration (Type-B, -C, and -D): Type-A alteration occurred at approximately 200 °C during hydrothermal activity after a granitic intrusion in Late Cretaceous; Type-B, -C and -D alterations occurred under hydrothermal activity accompanying deep fluids with repeated ascents invoked by the seismicity of the ATTL after the Late Miocene. The fluids may have been the “Arima-type thermal waters” (i.e., mixtures of convective groundwater and Na-Ca-Cl-HCO₃-type fluids). Type-B alteration occurred in fractures at depths where the temperature was ≥150 °C. Type-C alteration overprinted Type-B alteration as a result of mixing of new deep fluids and descending oxidized meteoric water near the surface. Fe³⁺ hydroxides and calcite precipitated from the fluids due to the oxidation of Fe²⁺ and the degassing of CO₂, respectively, at ambient to near-boiling temperatures. When the ascending fluids gushed out from the fractures, they generated Type-D alteration at the surface under similar temperature conditions due to the oxidation of Fe²⁺.     

The effects of possible contamination by sample holders on samples to be returned by Hayabusa2

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.     

Bayesian and Neural Network Approaches to Estimate Deep Temperature Distribution for Assessing a Supercritical Geothermal System: Evaluation Using a Numerical Model

The temperature distribution at depth is a key variable when assessing the potential of a supercritical geothermal resource as well as a conventional geothermal resource. Data-driven estimation by a machine-learning approach is a promising way to estimate temperature distributions at depth in geothermal fields. In this study, we developed two methodologies—one based on Bayesian estimation and the other on neural networks—to estimate temperature distributions in geothermal fields. These methodologies can be used to supplement existing temperature logs, by estimating temperature distributions in unexplored regions of the subsurface, based on electrical resistivity data, observed geological/mineralogical boundaries, and microseismic observations. We evaluated the accuracy and characteristics of these methodologies using a numerical model of the Kakkonda geothermal field, Japan, where a temperature above 500 °C was observed below a depth of about 3.7 km. When using geological and geophysical knowledge as prior information for the machine learning methods, the results demonstrate that the approaches can provide subsurface temperature estimates that are consistent with the temperature distribution given by the numerical model. Using a numerical model as a benchmark helps to understand the characteristics of the machine learning approaches and may help to identify ways of improving these methods.

     

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.     

Northward cooling of the Kuncha nappe and downward heating of the Lesser Himalayan autochthon distributed to the south of Mt. Annapurna,western central Nepal

We investigated the tectonothermal history of the Lesser Himalayan sediments (LHS), which are tectonically overlain by the Higher Himalayan Crystalline. Fission‐track dating and the track length measurement of detrital zircons obtained from the Kuncha nappe and the Lesser Himalayan autochthonous sediments in western central Nepal revealed northward cooling of the nappe and possible downward heating of the autochthon by the overlying hot nappe. Nine zircon fission‐track (ZFT) ages of the nappe showed northward‐younging linear distribution from 11.6 Ma in the front at Tamghas, 6 Ma in the central at Naudanda, and 1.6 Ma in the northernmost point at Tatopani. Thermochronological invert calculation of the ZFT length elucidated that the Kuncha nappe gradually cooled down (30 °C/Myr) at the front and rapidly cooled down (120 °C/Myr) at the root zone. In contrast, the ZFT age of the Chappani Formation, located just beneath the Kuncha nappe in the central part, demonstrated a totally reset age of 6.8 Ma, whereas the Virkot Formation, structurally far from the nappe, yielded a partially reset age of 457.3 Ma. This suggests that the LHS underwent downward heating, resulting in a thermal print on the upper part of the LHS; however, the thermal effect was not sufficient to anneal ZFT totally in the deeper part. Presently, the nappe cover is eroded and denuded from this area. Detrital zircons from the Chappani Formation in Tansen area to the south of the Bari Gad Fault did not show any evidence of annealing, suggesting that nappe never covered the LHS distributed to the south of the fault.     

Northward younging zircon fission‐track ages from 13 to 2 Ma in the eastern extension of the Kathmandu nappe and underlying Lesser Himalayan sediments distributed to the south of Mt. Everest

This study is concerned with the tectono‐thermal history of the Kathmandu nappe and the underlying Lesser Himalayan sediments (LHS) that are distributed in eastern Nepal. We carried out zircon fission‐track(ZFT) dating and obtained 16 ZFT ages from the eastern extension of the Kathmandu nappe, the Higher Himalayan Crystalline, Kuncha nappe, and the Main Central Thrust (MCT) zone. The ZFT ages of the frontal part of the Kathmandu nappe range from 13.0 ±0.8 Ma to 10.7 ±0.7 Ma and exhibit a northward‐younging tendency. These Middle Miocene ZFT ages indicate that the frontal part of the Kathmandu nappe remained at a temperature above 240 °C until the termination of its southward emplacement at 12–11 Ma. The ZFT ages of the LHS range from 11.1 ±0.9 Ma in the southern part of the Okhaldhunga Window to 2.4 ±0.3 Ma of the augen gneiss in the northern margin and also exhibit a northward‐younging age distribution. The ZFT ages show the northward‐younging linear distribution pattern (?0.16 Ma/km) along the across‐strikesection from the frontal part of the Kathmandu nappe to the root zone, without a significant age gap. This distribution pattern indicates that the Kathmandu nappe, the underlying MCT zone, and the Kuncha nappe cooled from the frontal zone to the root zone as a thermally united geologic body at a temperature below 240 °C. An older ZFT age (456.3 ±24.3 Ma), which was partially reset at the axial part of the Midland anticlinorium in the central part of the Okhaldhunga Window, was explained by downward heating from the “hot” Kathmandu nappe. The above evidence supported a model that southward emplacement of the hot Kathmandu nappe resulted in a thermal imprint on the upper part of the LHS; however, the lower part did not reach 240 °C.     

Out‐of‐plane stability of buckling‐restrained braces including moment transfer capacity

Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.     

Open and coastal seas interactions south of Japan represented by an ensemble Kalman filter

We investigated the feasibility of the ensemble Kalman filter (EnKF) to reproduce oceanic conditions south of Japan. We have adopted the local ensemble transformation Kalman filter algorithm based on 20 members’ ensemble simulations of the parallelized Princeton Ocean Model (the Stony Brook Parallel Ocean Model) with horizontal resolution of 1/36°. By assimilating satellite sea surface height anomaly, satellite sea surface temperature, and in situ temperature and salinity profiles, we reproduced the Kuroshio variation south of Japan for the period from 8 to 28 February 2010. EnKF successfully reproduced the Kuroshio path positions and the water mass property of the Kuroshio waters as observed. It also detected the variation of the steep thermohaline front in the Kii Channel due to the intrusion of the Kuroshio water based on the observation, suggesting efficiency of EnKF for detection of open and coastal seas interactions with highly complicated spatiotemporal variability.     

Size fraction and class composition of phytoplankton in the Antarctic marginal ice zone along the 140°E meridian during February–March 2003

We investigated the size fraction and pigment-derived class compositions of phytoplankton within the euphotic zone of the Antarctic marginal ice zone between 63.3°S and 66.5°S along the 140°E meridian on two consecutive cruises in the late austral summer and early austral autumn of 2003. We observed significant temporal and spatial variations in phytoplankton size and taxonomic composition, although chlorophyll a concentrations were generally below 1 μg l⁻¹ during both periods. Microphytoplankton (>20 μm), mainly diatoms, were prominent in the euphotic zone in the southernmost area around 66.5°S during late summer. In the rest of the study area during both cruises, the phytoplankton community was dominated by pico- and nano-sized populations (<20 μm) throughout the euphotic zone. The small-size populations mostly consisted of diatoms and haptophytes, although chlorophytes were dominant in extremely cold water (−1.5°C) below the overlying warm water around 65.5°S during late summer. From late summer to early autumn, chlorophytes declined in abundance, probably due to increasing temperature within the euphotic zone (−1 to 0°C). These pico- and nano-phytoplankton-dominated populations were often accompanied by relatively high concentrations of ammonium, suggesting the active regeneration of nutrients within the small-size plankton community.