Regional metamorphism and hydrothermal alteration related to Miocene submarine volcanism ('green tuff') in the Yurihara oil and gas field, northwest Honshu Island, Japan

Abstract Alteration of reservoir rocks in the Yurihara Oil and Gas Field, hereafter referred to as the ‘Yurihara field’, have been examined by using samples from six wells. These rocks are basalts in the lowermost part of the basin-fills (‘green tuff’ Formation). These basalts were produced in many eruptions in a submarine environment during the early to middle Miocene, and they underwent continuous intensive alteration genetically associated with Miocene submarine volcanism. The alteration of the basalts is of two types: low grade metamorphism and hydrothermal. The former belongs to the type of ocean floor metamorphism and comprises two subgroups: zeolite (zone I) and prehnite-pumpellyite (zones IIa: vein and amygdule occurrence, and IIb: replacing plagioclase). The latter is characterized by potassic metasomatism accompanied by adularia, quartz and calcite veins (zones IIIa: center and IIIb: margin of the metasomatism). This overprints the low grade metamorphic alteration. The central zone of hydrothermal alteration coincides with a major estimated fault, so that fluids probably assent along the fault. The basalts erupted during 16.5-15.5 Ma, determined by planktonic foraminifera assemblages of inter-bedded shales, then underwent successive low grade metamorphism. In time, the hydrothermal alteration that overprints low grade metamorphism occurred. Adularia veins of the altered rocks located in the hydrothermal alteration zones (zone IIIa and IIIb) have been dated as 9 Ma determined by the K-Ar method. This fact indicates that the activity of low grade metamorphism had already crossed the peak before hydrothermal alteration occurred at 9 Ma. The shape of isotherms of fluid inclusion homogenization temperatures (Th) and that of isolines of apparent salinity (Tm) almost coincide with each other, and these also coincide with the distribution of hydrothermal alteration (zones IIIa and IIIb). This indicates that the fluid inclusions formed at the same time as ascending fluids produced the potassic metasomatism. The maximum Th of the fluid inclusions is 222°C and Tm indicates trapped fluids of up to 3.3 wt% equivalent NaCl (i.e. almost the same as seawater). A Th versus Tm plot indicates mixing occurred between hydrothermal fluids and formation water that has low salinity. Corrensite and chlorite form veins, and the temperatures of their formation, estimated by the extent of aluminium substitution into the tetrahedral site of chlorite, ranges between 165 and 245°C in the centre of the hydrothermal alteration zone (zone IIIa). This is consistent with the result of Th analyses. The deposition temperature of chlorite associated with prehnite in veins ranges between 190 and 215°C in zones IIa and IIb.     

Mineralogy,chemistry and crystallization sequence of clay minerals in altered tholeiitic basalts from the Peru Trench

Petrographic examination of amygdules and veins associated with moderately altered pillow basalts dredged from the Peru Trench has revealed that a consistent pattern of mineral crystallization has occurred. This sequence is: (1) green, weakly pleochroic clay (R.I. > 1.56); (2) dark yellowish brown, non-pleochroic clay (R.I. > 1.56); (3) light yellowish brown to colorless, fibrous, weakly pleochroic clay (R.I. < 1.56); and (4) calcite or celadonite. Chemical and X-ray diffraction analyses suggest that all clay mineral amygdule and vein fillings are dominated by intimate mixtures of an Fe-rich saponite and nontronite with very small admixtures of serpentine and illite. It is argued that sequential mineral fillings of fractures and vesicles may provide significant information about the chemistry of circulating interstitial fluids. For the pillow basalts studied the first-formed clays were enriched in nontronite, thereby suggesting Fe-rich fluids. These in turn were followed by saponite-rich clays and calcite. The change from Fe-and Mg-rich fluids to dominantly Ca-rich fluids is thought to correspond to a change from mafic mineral alteration to plagioclase alteration in the pillow basalts. An increase in the Fe³⁺/Fe²⁺ ratio of clays toward the centers of vesicles may indicate a change toward a more oxidizing environment of alteration.     

Lithium and lithium isotope profiles through the upper oceanic crust: a study of seawater-basalt exchange at ODP Sites 504B and 896A

Ocean Drilling Program (ODP) Hole 504B near the Costa Rica Rift is the deepest hole drilled in the ocean crust, penetrating a volcanic section, a transition zone and a sheeted dike complex. The distribution of Li and its isotopes through this 1.8-km section of oceanic crust reflects the varying conditions of seawater alteration with depth. The upper volcanic rocks, altered at low temperatures, are enriched in Li (5.6-27.3 ppm) and have heavier isotopic compositions (δ⁷Li=6.6-20.8‰) relative to fresh mid-ocean ridge basalt (MORB) due to uptake of seawater Li into alteration clays. The Li content and isotopic compositions of the deeper volcanic rocks are similar to MORB, reflecting restricted seawater circulation in this section. The transition zone is a region of mixing of seawater with upwelling hydrothermal fluids and sulfide mineralization. Li enrichment in this zone is accompanied by relatively light isotopic compositions (−0.8-2.1‰) which signify influence of basalt-derived Li during mineralization and alteration. Li decreases with depth to 0.6 ppm in the sheeted dike complex as a result of increasing hydrothermal extraction in the high-temperature reaction zone. Rocks in the dike complex have variable isotopic values that range from −1.7 to 7.9‰, depending on the extent of hydrothermal recrystallization and off-axis low-temperature alteration. Hydrothermally altered rocks are isotopically light because ⁶Li is preferentially retained in greenschist and amphibolite facies minerals. The δ⁷Li values of the highly altered rocks of the dike complex are complementary to those of high-temperature mid-ocean ridge vent fluids and compatible to equilibrium control by the alteration mineral assemblage. The inventory of Li in basement rocks permits a reevaluation of the role of oceanic crust in the budget of Li in the ocean. On balance, the upper 1.8 km of oceanic crusts remains a sink for oceanic Li. The observations at 504B and an estimated flux from the underlying 0.5 km of gabbro suggest that the global hydrothermal flux is at most 8×10⁹ mol/yr, compatible with geophysical thermal models. This work defines the distribution of Li and its isotopes in the upper ocean crust and provides a basis to interpret the contribution of subducted lithosphere to arc magmas and cycling of crustal material in the deep mantle.     

Chemical evolution of thermal waters and changes in the hydrothermal system of Papandayan volcano (West Java,Indonesia) after the November 2002 eruption

Papandayan is a stratovolcano situated in West Java, Indonesia. Since the last magmatic eruption in 1772, only few hydrothermal explosions have occurred. An explosive eruption occurred in November 2002 and ejected ash and altered rocks. The altered rocks show that an advanced argillic alteration took place in the hydrothermal system by interaction between acid fluids and rocks. Four zones of alteration have been defined and are limited in extension and shape along faults or across permeable structures at different levels beneath the active crater of the volcano.     

Porosity, permeability, and fluid flow in the Yellowstone geothermal system, Wyoming

Cores from two of 13 U.S. Geological Survey research holes at Yellowstone National Park (Y-5 and Y-8) were evaluated to characterize lithology, texture, alteration, and the degree and nature of fracturing and veining. Porosity and matrix permeability measurements and petrographic examination of the cores were used to evaluate the effects of lithology and hydrothermal alteration on porosity and permeability. The intervals studied in these two core holes span the conductive zone and the upper portion of the convective geothermal reservoir. Variations in porosity and matrix permeability observed in the Y-5 and Y-8 cores are primarily controlled by lithology. Y-8 intersects three distinct lithologies: volcaniclastic sandstone, perlitic rhyolitic lava, and non-welded pumiceous ash-flow tuff. The sandstone typically has high permeability and porosity, and the tuff has very high porosity and moderate permeability, while the perlitic lava has very low porosity and is essentially impermeable. Hydrothermal self-sealing appears to have generated localized permeability barriers within the reservoir. Changes in pressure and temperature in Y-8 correspond to a zone of silicification in the volcaniclastic sandstone just above the contact with the perlitic rhyolite; this silicification has significantly reduced porosity and permeability. In rocks with inherently low matrix permeability (such as densely welded ash-flow tuff), fluid flow is controlled by the fracture network. The Y-5 core hole penetrates a thick intracaldera section of the 0.6-Ma Lava Creek ash-flow tuff. In this core, the degree of welding appears to be responsible for most of the variations in porosity, matrix permeability, and the frequency of fractures and veins. Fractures are most abundant within the more densely welded sections of the tuff. However, the most prominent zones of fracturing and mineralization are associated with hydrothermal breccias within densely welded portions of the tuff. These breccia zones represent transient conduits of high fluid flow that formed by the explosive release of overpressure in the underlying geothermal reservoir and that were subsequently sealed by supersaturated geothermal fluids. In addition to this fracture sealing, hydrothermal alteration at Yellowstone appears generally to reduce matrix permeability and focus flow along fractures, where multiple pulses of fluid flow and self-sealing have occurred.     

Major active faults determine the location of the Tongonan geothermal field: Evidence provided by rock alteration and stable isotope geochemistry

Abstract The influence of major active faults on rock alteration and stable isotope geochemistry is described for the Tongonan geothermal field, Leyte, the Philippines. In the Pliocene, acid alteration with characteristic iron enrichment (3 g/100 g) and calcium depletion (2 g/100 g) occurred along a Riedel shear fault in the Malitbog sector, and initial minor acid alteration also occurred along a similar shear in the Mahiao sector. Later, sodium metasomatism (5 g/100 g) coincided with the highest aquifer chloride (10 000 mg/kg) as a result of dissociation of saline magmatic fluids discharging through the reservoir rocks in the Upper Mahiao. The incursion of magmatic fluids (possibly δD 35‰, δ¹⁸O +7‰) set up a vigorous convection cell of meteoric water, which focused around low‐angle (L) shears centered in the Sambaloran sector. Meteoric water (δD ?35 to ?40‰, δ¹⁸O ?6 ± 1‰) depleted the reservoir in silica (6 g/100 g) and potassium (1–2 g/100 g). It also completely exchanged oxygen isotopes rapidly (within months) at high temperatures (300–400°C), and now does so continuously with fractured isotopically fresh or incompletely altered rock at small scales (centimeters or less) exposed by a 2 cm/year creep around the L shears to form a new component called geothermal water. Geothermal water mixes with meteoric water at lower temperatures (<300°C) to create the characteristic shift in δ¹⁸O of 6‰ at near constant δD (?35 ± 5‰). The 10‰ variation in δD is due to groundwater recharge derived from rain falling on steep terrain (5‰) and to enrichment of deuterium in boiling saline solutions (5‰); it is not due to two‐component mixing of meteoric with magmatic water. The low (～1) isotopic water/rock (W/R) ratios calculated from oxygen isotopes in previously published reports are meaningless, because the water contains four components (predominantly geothermal and meteoric water; <10% magmatic and rock water). W/R ratios of up to 1500 calculated from spring and rock chemistry are more realistic and, with a flow rate of approximately 50 L/s through a 30 km³ reservoir, can account for the estimated 3 My age of the system.     

Rare-earth element and heavy-metal behaviour associated with the epithermal gold deposit on Lihir Island, Papua New Guinea

A thick sequence of alkaline intrusions and volcanic rocks underlies a Quaternary caldera on Lihir Island. The sequence is host to a still-active subaerial hydrothermal system and associated epithermal gold mineralization. Chondrite-normalized (La/Lu)_cn and (La/Sm)_cn ratios progressively increase up the alteration sequence from the potassic alteration zone, to the argillic zone to the advanced argillic zone. (Tb/Lu)_cn ratios only significantly increase in argillic and advanced argillic assemblages. Surface oxide alteration lithologies and acid sulphate water precipitates possess distinctly lower (La/Lu)_cn and (Tb/Lu)_cn ratios than the underlying subsurface alteration units. The changes in the REE, LREE and HREE fractionation trends from subsurface to surface alteration zones reflect the transition from a magmatic-hydrothermal, neutral chloride fluid regime at depth to acid sulphate meteoric waters in the upper portion of the alteration profile.Boiling of the LREE-Eu-enriched magmatic fluids occurred at a depth of at least 750 m. It is proposed that pronounced differential flow rates of the vapour and liquid phases and solution chemistry changes approximately above 300–350 m caused the incorporation of LREE and Eu into anhydrite-calcite veins and the deposition of LREE and HREE into wallrocks of upper parts of the potassic alteration unit. Condensation of the vapour phases into meteoric waters gave rise to low-temperature acid fluids that deposited large amounts of LREE within argillic and advanced argillic alteration units. This was also accompanied by HREE mobility due to large fluid volumes, acid fluid conditions and abundant sulphate complexes within the solutions. The HREE were either lost from the hydrothermal system or deposited in oxide assemblages and acid sulphate water precipitates.     

Distribution and significance of hydrothermal alteration minerals in the Tuzla hydrothermal system, Çanakkale, Turkey

Hydrothermal alteration zones have been investigated by X-ray diffraction, mineralogical–petrographical techniques, and geochemical analysis. Examination of cores and cuttings from two drill sites, obtained from a depth of about 814–1020 m, show that the hydrothermal minerals occuring in the rock include: K-feldspar, albite, chlorite, alunite, kaolinite, smectite, illite, and opaque minerals.In the studied area, silicified, smectite, illite, alunite, and opal zones have been recognized. These alteration mineral assemblages indicate that there are geothermal fluids, which have temperatures of 150–220°C in the reservoir.The distribution of the hydrothermal minerals shows changes in the chemical composition of the hydrothermal fluid, which are probably due not only to interaction with host rock, but also to dilution of the Na–K–Cl-rich hydrothermal fluid of the deep reservoir by cold sea water at shallow levels. Geochemical analyses of the solid and liquid phases indicate that the hydrothermal fluids of the Tuzla geothermal system are in equilibrium with alteration products.The tectonic structure of the studied area is caused by NW–SE and NE–SW directional forces. The volcanic rocks where hydrothermal zones are observed in the studied area are of Lower–Middle Miocene age comprise latite, andesite, dacite, rhyolite-type lavas, tuff, and ignimbrites.     

Ore-forming mechanism for the Xiaoxinancha Au-rich Cu deposit in Yanbian,Jilin Province,China: Evidence from noble gas isotope geochemistry of fluid inclusions in minerals

The Xiaoxinancha Au-rich copper deposit is one of important Au-Cu deposits along the continental margin in Eastern China. The deposit consists of two sections: the Beishan mine (North), composed of altered rocks with veinlet-dissemination sulfides and melnicovite-dominated sulfide-quartz veins, and the Nanshan mine (South), composed of pyrrhotite-dominated sulfide-quartz veins and pure sulfide veins. The isotope compositions of noble gases extracted from fluid inclusions in ore minerals, i.e. ratios of 3He/4He, 20Ne/22Ne and40Ar/36Ar are in the ranges of 4.45―0.08 Ra, 10.2―8.8 and 306―430, respectively. Fluid inclusions in minerals from the Nanshan mine have higher 3He/4He and 20Ne/22Ne ratios whereas those from the Beishan mine have lower 3He/4He ratios. The analysis of origin, and evolution of the ore fluids and its relations with the ore-forming stages and the ages of mineralization suggests that the initial hydrothermal fluids probably come from the melts generated by partial melting of oceanic crust with the participation of fluids from the mantle (mantle-plume type)/aesthenosphere. This also corresponds to the continental margin settings during the subduction of Izanagi ocaneic plate towards the palaeo-Asian continent (123―102 Ma). The veinlet-dissemination ore bodies of the Beishan mine were formed through replacement and crystallization of the mixed fluids generated by mixing of the ascending high-temperature boiling fluid with young crustal fluid whereas the melnicovite-dominated sulfide-quartz veins were formed subsequently by filling of the high-temperature ore fluid in fissures. Pyrrhotite-dominated sulfide-quartz veins in the Nanshan mine were formed by filling-deposition-crystallization of the moderate-temperature ore fluids and the pure sulfide veins were formed later by filling-deposition-crystallization of ore substance-rich fluids after boiling of the moderate-temperature ore fluids. The metallogenic dynamic processes can be summarized as: (1) formation of fluidand ore substance-bearing Adakitic magma by degassing, dewatering and partial melting during subduction of the Izanagi plate; (2) separation and formation of ore fluids from the Adakitic magma; and (3) success-sive ascending of the ore fluids and final formation of the Au-rich Cu deposit of veinlet-dissemination and vein types by secondary boiling.     

Microprobe studies of REE-rich accessory minerals: Implications for Skye granite petrogenesis and REE mobility in hydrothermal systems

The REE geochemistry of accessory allanites, sphenes. apatites and zircons from a range of granitic, sedimentary and hydrothermally altered rocks from Skye has been investigated using the electron microprobe. Allanites and sphenes in Skye Tertiary granites are extremely LREE enriched (Ce_N/Y_N= 40–100) and may contain up to 50% of whole rock LREE (La-Nd). These phases are late crystallisation products of redidual magmatic fluids. Earlier-formed apatites (Ce_N/Yb_N = 7.33) and zircons (Ce_N/Yb_N = 0.05) contain insufficient REE to have influenced the REE geochemistry of the Western Red Hills granites by crystal fractionation. However, Y-, Th- and HREE-rich zircons (Ce_N/Yb_N = 0.03–0.12, ΣREE + Y = 16,500–49,500ppm) occur both as detrital grains in Skye Torridonian sediments and in the Coire Uaigneich Granophyre (CUG), suggesting bulk involvement of these sediments in CUG petrogenesis. Hydrothermal allanites in altered Tertiary igneous rocks from Skye are LREE enriched (Ce_N/Y_N = 16–920), whilst allanites formed during alteration of Torridonian arkoses have less fractionated REE patterns (Ce_N/Y_N = 4.4–1.0), as the instability of metamict HREE-rich detrital zircons buffered the hydrothermal fluids in these rocks to more HREE-rich compositions. This buffering indicates that within unveined rocks the scale of REE mobility during hydrothermal alteration was small, even though the occurrence of allanite in hydrothermal veins on Skye suggests that LREE may have been transported for some distance by meteoric-hydrothermal fluids. Zoning of the REE within individual hydrothermal and metamorphic allanites (e.g. coreCe_N/Y_N = 97.56, rim Ce_N/Y_N = 0.22) suggests evolution of their parent geological fluids to more HREE-rich compositions during allanite growth.     

226Ra and222Rn contents of Galapagos Rift hydrothermal waters —the importance of low-temperature interactions with crustal rocks

Hydrothermal waters collected by “Alvin” from the Galapagos Spreading Center are enriched in²²²Rn by factors of 50–200 over bottom waters. The²²⁶Ra in the same samples, however, is enriched by less than a factor of four over bottom waters. Enrichments of²²²Rn result primarily from α-recoil from rock surfaces while²²⁶Ra enrichments are dominantly produced by high-temperature alteration of cooling ridge volcanics. The abundances of both nuclides exhibit positive correlations with temperature. The data extrapolate to bottom water temperatures and compositions, demonstrating the importance of seawater mixing. Different vents, however, have different mixing lines, and vents with high²²²Rn have low²²⁶Ra. We propose these patterns result from variations in the extent of low-temperature crustal interaction with the hydrothermal fluids. Low-temperature crustal waters can maintain high steady state²²²Rn contents due to the α-recoil additions to the fluids. The²²⁶Ra, however, is strongly adsorbed at low-temperatures resulting in low concentrations of this nuclide in low-temperature crustal waters. Thus, physical mixing of a crustal water component with hydrothermal waters or variable crustal path lengths of the hydrothermal fluids can account for the variable mixing lines and²²²Rn/²²⁶Ra values of the hot springs.The²²²Rn/²²⁶Ra value appears to be a sensitive indicator of low-temperature crustal interaction. Values > 100 have experienced extensive crustal interaction and are indicative of diffuse hydrothermal flow. Values between 1 and 10 are indicative of primary hydrothermal fluids which have not experienced significant interaction with the crust. Values of²²²Rn/²²⁶Ra between 10³ and 10⁴ are indicative of interaction of the hydrothermal fluids with sediments. Such values are observed in water samples from the Galapagos hydrothermal mounds.     

美国最近三代地震区划图中的断裂震源模型

活断层与古地震定量数据在美国近三代地震区划图中的应用基本上体现了各阶段活断层研究的最新成果,其中断裂震源模型起到了桥梁的作用,并不断得到完善。在1996年地震区划图中引入了特征地震模型与截断的G—R模型,用以表述断层的震级一频度分布关系。在2002年地震区划图中更明确地处理了参数的不确定性,并引入逻辑树概念,同时在特征地震模型中试用了多段破裂模型。在2008年地震区划图中引用了更为广泛的逻辑树来描述地震构造几何形态、地震震级和复发周期的不确定性,其中特征地震模型包括：单段破裂和多段破裂的特征地震模型,以及给定震级的浮动地震模型（或不固定分段模型）。这些经验值得在我国第五代地震区划图的编制工作中借鉴。     

Evidence of mantle-rooted fluids and multi-level circulation ore-forming dynamics: A case study from the Xiadian gold deposit,Shandong province,China

Metallogensis of the Xiadian gold deposit in Shandong Province has been a question under dispute for a long time. There are many points such as metamorphic hydrothermal, magamatic hydrothermal and meteoric water. Detailed study shows that mantle-rooted fluids were involved in the ore-forming processes. Evidence for this argumentation comes from: (1) discor-dogenic fault; (2) intersecting and accompanying of basic veins and lodes; (3) geochemistry of stable isotopes; (4) geochemistry of fluid inclusions; and (5) multi-level circulation and exchanging of mantle-rooted fluids. Based on the characteristics of the circulation system of mantle-rooted fluids and its close relation to magmatic hydrothermal fluids and meteoric water, ore-bearing fluids are divided into three subsystems: (1) C-H-O-rich fluid circulation subsystem in mantle, (2) Si-rich fluid circulation subsystem in the middle and lower crust; and (3) S-rich fluid circulation subsystem in shallow and surface crust. Ore-forming functions of these subsystems are controlled respectively by their different geodynamic settings.

     

Characteristics,extent and origin of hydrothermal alteration at Mount Rainier Volcano,Cascades Arc,USA: Implications for debris-flow hazards and mineral deposits

Hydrothermal alteration at Mount Rainier waxed and waned over the 500,000-year episodic growth of the edifice. Hydrothermal minerals and their stable-isotope compositions in samples collected from outcrop and as clasts from Holocene debris-flow deposits identify three distinct hypogene argillic/advanced argillic hydrothermal environments: magmatic-hydrothermal, steam-heated, and magmatic steam (fumarolic), with minor superimposed supergene alteration. The 3.8 km³ Osceola Mudflow (5600 y BP) and coeval phreatomagmatic F tephra contain the highest temperature and most deeply formed hydrothermal minerals. Relatively deeply formed magmatic-hydrothermal alteration minerals and associations in clasts include quartz (residual silica), quartz–alunite, quartz–topaz, quartz–pyrophyllite, quartz–dickite/kaolinite, and quartz–illite (all with pyrite). Clasts of smectite–pyrite and steam-heated opal–alunite–kaolinite are also common in the Osceola Mudflow. In contrast, the Paradise lahar, formed by collapse of the summit or near-summit of the edifice at about the same time, contains only smectite–pyrite and near-surface steam-heated and fumarolic alteration minerals. Younger debris-flow deposits on the west side of the volcano (Round Pass and distal Electron Mudflows) contain only low-temperature smectite–pyrite assemblages, whereas the proximal Electron Mudflow and a < 100 y BP rock avalanche on Tahoma Glacier also contain magmatic-hydrothermal alteration minerals that are exposed in the avalanche headwall of Sunset Amphitheater, reflecting progressive incision into deeper near-conduit alteration products that formed at higher temperatures.     

The scientific connotation of oil and gas formations under deep fluids and organic-inorganic interaction

As a relatively stable craton block in the earth system, the petroliferous basin is influenced by the evolution of the earth system from the early development environment of source rocks, hydrocarbon formation, and reservoir dissolution to hydrocarbon accumulation or destruction. As a link between the internal and external factors of the basin, deep fluids run through the whole process of hydrocarbon formation and accumulation through organic-inorganic interaction. The nutrients carried by deep fluids promote the bloom of hydrocarbon-generating organisms and extra addition of carbon and hydrogen source, which are beneficial to the development of high-quality source rock and enhancement of the hydrocarbon generation potential. The energy carried by the deep fluid promotes the early maturation of the source rock and facilitates the hydrocarbon generation by activation and hydrogenation in high-mature hydrocarbon sources. The dissolution alteration of carbonate rocks and clastic reservoirs by CO_2-rich deep fluids improves the deep reservoir space, thus extending the oil and gas reservoir space into greater depth. The extraction of deeply retained crude oil by deep supercritical CO_2 and the displacement of CH_4 in shale have both improved the hydrocarbon fluidity in deep and tight reservoirs. Simultaneously, the energy and material carried by deep fluids(C, H, and catalytic substances) not only induce inorganic CH_4 formation by Fischer-Tropsch(F-T) synthesis and "hydrothermal petroleum" generation from organic matter by thermal activity but also cause the hydrothermal alteration of crude oil from organic sources. Therefore, from the perspective of the interaction of the earth's sphere, deep fluids not only input a significant amount of exogenous C and H into sedimentary basins but also improve the reservoir space for oil and gas, as well as their enrichment and accumulation efficiencies.     

Fluids in early stage hydrothermal alteration of high-sulfidation epithermal systems: A view from the Vulcano active hydrothermal system (Aeolian Island,Italy)

High-sulfidation (HS) epithermal systems have elements in common with passively degassing volcanoes associated with high T, acid fumarole fields or acid crater lakes. They are considered to form in two stages, the first of which involves advanced argillic alteration resulting from intense, strongly acidic fluid–rock interaction. The La Fossa hydrothermal system (Vulcano Island) represents a classic example of such an active HS system and can be considered as a modern analogue of this early stage of alteration, resulting in a core of intense silicic (90–95% pure SiO₂) alteration surrounded by alunitic alteration zones.     

Evidence of mantle-rooted fluids and multi-level circulation ore-forming dynamics: A case study from the Xiadian gold deposit, Shandong Province, China

Metallogensis of the Xiadian gold deposit in Shandong Province has been a question under dispute for a long time. There are many points such as metamorphic hydrothermal, magamatic hydrothermal and meteoric water. Detailed study shows that mantle-rooted fluids were involved in the ore-forming processes. Evidence for this argumentation comes from: (1) discordogenic fault; (2) intersecting and accompanying of basic veins and lodes; (3) geochemistry of stable isotopes; (4) geochemistry of fluid inclusions; and (5) multi-level circulation and exchanging of mantle-rooted fluids. Based on the characteristics of the circulation system of mantle-rooted fluids and its close relation to magmatic hydrothermal fluids and meteoric water, ore-bearing fluids are divided into three subsystems: (1) C-H-O-rich fluid circulation subsystem in mantle, (2) Si-rich fluid circulation subsystem in the middle and lower crust; and (3) S-rich fluid circulation subsystem in shallow and surface crust. Ore-forming functions of these subsystems are controlled respectively by their different geodynamic settings.     

Evidence of mantle-rooted fluids and multi-level circulation ore-forming dynamics: A case study from the Xiadian gold deposit,Shandong province,China

Metallogensis of the Xiadian gold deposit in Shandong Province has been a question under dispute for a long time. There are many points such as metamorphic hydrothermal, magamatic hydrothermal and meteoric water. Detailed study shows that mantle-rooted fluids were involved in the ore-forming processes. Evidence for this argumentation comes from: (1) discor-dogenic fault; (2) intersecting and accompanying of basic veins and lodes; (3) geochemistry of stable isotopes; (4) geochemistry of fluid inclusions; and (5) multi-level circulation and exchanging of mantle-rooted fluids. Based on the characteristics of the circulation system of mantle-rooted fluids and its close relation to magmatic hydrothermal fluids and meteoric water, ore-bearing fluids are divided into three subsystems: (1) C-H-O-rich fluid circulation subsystem in mantle, (2) Si-rich fluid circulation subsystem in the middle and lower crust; and (3) S-rich fluid circulation subsystem in shallow and surface crust. Ore-forming functions of these subsystems are controlled respectively by their different geodynamic settings.     

Hydrothermal alteration in the Reykjanes geothermal system: Insights from Iceland deep drilling program well RN-17

The Reykjanes geothermal system is a seawater-recharged hydrothermal system that appears to be analogous to seafloor hydrothermal systems in terms of host rock type and low water/rock alteration. The similarities make the Reykjanes system a useful proxy for seafloor vents. At some time during the Pleistocene, the system was dominated by meteoric water recharge, and fluid composition at Reykjanes has evolved through time as a result of changing proportions of meteoric water influx as well as differing pressure and temperature conditions. The purpose of this study is to characterize secondary mineralization, degree of metasomatic alteration, and bulk composition of cuttings from well RN-17 from the Reykjanes geothermal system. The basaltic host rock includes hyaloclastite, breccia, tuff, extrusive basalt, diabase, as well as a marine sedimentary sequence. The progressive hydrothermal alteration sequence observed with increasing depth results from reaction of geothermal fluids with the basaltic host rock. An assemblage of greenschist facies alteration minerals, including actinolite, prehnite, epidote and garnet, occurs at depths as shallow as 350 m; these minerals are commonly found in Icelandic geothermal systems at temperatures above 250 °C (Bird and Spieler, 2004). This requires hydrostatic pressures that exceed the present-day depth to boiling point curve, and therefore must record alteration at higher fluid pressures, perhaps as a result of Pleistocene glaciation. Major, minor, and trace element profiles of the cuttings indicate transitional MORB to OIB composition with limited metasomatic shifts in easily mobilized elements. Changes in MgO, K₂O and loss on ignition indicate that metasomatism is strongly correlated with protolith properties. The textures of alteration minerals reveal alteration style to be strongly dependent on protolith as well. Hyaloclastites are intensely altered with calc-silicate alteration assemblages comprising calcic hydrothermal plagioclase, grandite garnet, prehnite, epidote, hydrothermal clinopyroxene, and titanite. In contrast, crystalline basalts and intrusive rocks display a range in alteration intensity from essentially unaltered to pervasive and nearly complete albitization of igneous feldspar and uralitization of clinopyroxene. Hydrothermal anorthite (An92–An98) occurs in veins in the most altered basalt cuttings and is significantly more calcic than igneous feldspar (An48–An79). Amphibole compositions change from actinolite to hornblende at depth. Hydrothermal clinopyroxene, which occurs in veins, has greater variation in Fe content and is systematically more calcic than igneous pyroxene and also lacks uralitic textures. Solid solutions of prehnite, epidote, and garnet indicate evolving equilibria with respect to aluminum and ferric iron.     

Zeolitization of intracaldera sediments and rhyolitic rocks in the 1.25 Ma lake of Valles caldera,New Mexico,USA

Quantitative X-ray diffraction analysis of about 80 rhyolite and associated lacustrine rocks has characterized previously unrecognized zeolitic alteration throughout the Valles caldera resurgent dome. The alteration assemblage consists primarily of smectite–clinoptilolite–mordenite–silica, which replaces groundmass and fills voids, especially in the tuffs and lacustrine rocks. Original rock textures are routinely preserved. Mineralization typically extends to depths of only a few tens of meters and resembles shallow “caldera-type zeolitization” as defined by Utada et al. [Utada, M., Shimizu, M., Ito, T., Inoue, A., 1999. Alteration of caldera-forming rocks related to the Sanzugawa volcanotectonic depression, northeast Honshu, Japan — with special reference to “caldera-type zeolitization.” Resource Geol. Spec. Issue No. 20, 129–140]. Geology and ⁴⁰Ar/³⁹Ar dates limit the period of extensive zeolite growth to roughly the first 30 kyr after the current caldera formed (ca. 1.25 to 1.22 Ma). Zeolitic alteration was promoted by saturation of shallow rocks with alkaline lake water (a mixture of meteoric waters and degassed hydrothermal fluids) and by high thermal gradients caused by cooling of the underlying magma body and earliest post-caldera rhyolite eruptions. Zeolitic alteration of this type is not found in the later volcanic and lacustrine rocks of the caldera moat (≤ 0.8 Ma) suggesting that later lake waters were cooler and less alkaline. The shallow zeolitic alteration does not have characteristics resembling classic, alkaline lake zeolite deposits (no analcime, erionite, or chabazite) nor does it contain zeolites common in high-temperature hydrothermal systems (laumontite or wairakite). Although aerially extensive, the early zeolitic alteration does not form laterally continuous beds and are consequently, not of economic significance.