1997-1998年伽师强震群震源区应力场特征

利用1997-1998年伽师强震群中强地震震源机制系统聚类及震源区应力场反演,得到以下主要结果:(1)伽师强震群中强地震主要以走滑和正断层为主,伽师震源区主压应力方向为NNE或近NS向,与相邻的柯坪块体区域构造应力场方向不一致;伽师强震群的破裂面沿NEE方向,属左旋破裂;(2)4~5级中强地震应力场反演得到最大主压应力轴为NNE向,最小主压应力轴为NWW向,中等主应力轴倾角为65°,比较直立;(3)伽师强震群震源区应力场在强震前后经历了一系列变化。最后对所得结果进行了一定的讨论。     

中温UBF与UASB两相厌氧系统处理垃圾渗滤液的实验研究

针对石碑岭垃圾场渗滤液水质特性,采用以高效生物陶粒为填料的UBF反应器作酸化相,以UASB反应器作甲烷相的两相厌氧系统进行了处理垃圾渗滤液的实验研究.实验结果表明:在系统进水CODCr和BOD5质量浓度分别为3 887 mg/L和819 mg/L,UBF与UASB的HRT分别控制在10.3 h和61.7 h时,CODCr和BOD5总去除率分别为85.4%和90.1%,UBF酸化率达42.9%,BOD5/CODCr比值由0.21提高到0.39.     

新疆粘土矿物材料在环境污染治理中的应用和展望

对粘土矿物在当前环境污染治理中的基本应用做了介绍,并系统阐述了主要粘土矿物的结构特征、基本性能和主要应用。对粘土矿物材料在环境污染治理中的应用领域提出了一些思考,这对当前粘土矿物材料在环境污染治理中的应用具有一定的指导意义。     

Trace变换的基本理论及其在地震勘探中的应用

Trace变换是一种新的图象重建工具,在图象重建方面已取得很好的效果。推导了Trace变换公式中的一个公式:∫(ε(t))rdtq的反变换公式,并结合τ-p变换中坐标系的转换关系,讨论了它在地震勘探中应用的可能性。对80道单一理论水平合成记录作了正、反变换的分析。从原记录和反变换记录中分别取道分析,分析结果表明对80道理论水平记录能很好的恢复。     

青海高原地区近250 a来年平均气温变化及突变分析

用多条树轮重建的青海高原近250 a平均气温序列,利用线性趋势、小波变换分析和突变检测等方法对近250 a青海高原年平均气温的年际变化及突变特征进行了综合分析,结果表明:250多a来青海高原年平均气温波动明显,30 a滑动平均表现出1779～1811年和1934～2006年年平均气温偏高,其中年平均气温最高出现在1998年为1.3℃,1741～1778年和1812～1933年年平均气温偏低,其中年平均气温最低出现在1823年为-1.5℃,年气温总体呈上升趋势;在20 a以上相对大尺度上,年平均气温冷、暖交替的特征明显,经历了7个冷、暖交替阶段,在2～3 a,28 a左右,48 a和110 a时间尺度上的周期变化都比较明显。     

基于GPS/CDMA集成的移动定位与服务技术

随着空间信息技术的发展，移动定位服务需要更高的定位精度。人们的活动范围越来越不确定，这给移动通信带来了无限商机和挑战，在此领域，日本处于世界领先地位，国内主要有Nokia、Ericsson、Motorola等。提出了一种基于GPS／CDMA集成的移动定位与服务技术，并分析了其中关键技术和实施的可行性。     

论专业气象服务可持续发展若干问题

论述影响专业气象服务可持续发展的８个问题,并具体分析每个问题的特点,指出解决问题的思路。     

湖平面升降对浅水三角洲前缘砂体形态的影响

三角洲平原上的分流河道通过填积和湖面的频繁波动向湖泊中心方向长距离推进,在浅水三角洲前缘的浅水区发育很有特色的水下分流河道,且在湖面频繁波动过程中,河流、波浪和沿岸流的冲刷作用对沉积物分布起到再改造作用,导致了以水下分流河道砂体为主的三角洲前缘砂体不同程度的席状化。随着气候变得潮湿,湖面相对稳定,季节性、周期性湖面波动的频率、幅度减小,水动力对三角洲前缘砂体的改造和席状化强度减弱。     

珠三角地区地震前兆场特征及近期地震危险性分析

应用时空域层次分析新思路及我国地震科技攻关成果对珠江三角洲地区的地震前兆资料进行了数据处理和综合分析,对该区的地震前兆场特征作了较全面系统的研究,并对目前存在的区域前兆异常场进行特征分析。研究认为,区内现有的前兆监测方法在中强地震发生前呈现出与正常动态变化相异的中期或中短期前兆异常反映,并具有相对丛集的总体特征。前兆异常场由东莞虎门重力、广州水化学等构成。最后对珠江三角洲地区近期的地震危险性进行了     

RESEARCH ON EARTHQUAKE EMERGENCY MAPPING METHOD BASED ON TEMPLATE MATCH

After an earthquake, earthquake emergency response and rescue are important ways to mitigate earthquake-induced losses. Various earthquake emergency maps can provide effective references and guidance to those actions. Currently, related studies include the investigation on symbols of emergency maps, remote sensing emergency mapping and GIS-based mapping methods. However, the existing studies overlook the characteristics of rapidity, dynamicity and variety of presentation methods in making earthquake emergency maps. In this paper, a map template matching method is used to quickly make earthquake emergency maps considering their characteristics. We take investigations on the service objects(users)of the earthquake emergency maps to understand the needs of making earthquake emergency maps. The audience theory in mass media field and map information transmission theory are adopted to classify the users of the earthquake emergency maps into four categories: earthquake emergency commanders, technical staffs for decision-making, earthquake emergency rescuers, and the public. The components of different types of users are described and then their diverse demands in earthquake emergency maps are analyzed, such as the needs of on-field disaster information maps, earthquake information maps, physical geography and social economic maps. Following those needs, we introduce the representation methods of the earthquake emergency maps according to their formats(vector or raster)and contents, such as point symbolization method, kilometer grid method, line symbolization method and range method. Then, we study the rapid plotting method of earthquake emergency map based on map template matching method. The core steps of the method include: 1)before earthquake, the templates of different earthquake emergency maps are designed, prepared and connect the earthquake emergency features with their related spatial database. The map layout and map elements are stored in the templates. 2)After earthquake, the earthquake emergency features will be generated from seismic models(such as attenuation model of earthquake magnitude and seismic intensity)or the information obtained from field investigation. 3)Corresponding earthquake emergency map template is selected in accordance with the generated seismic features. And the features are used to update related features inside the selected template. 4)Minor adjustments are made such as to the map scale and some map annotations to finally generate the formal earthquake emergency map. Architecture of template system of the earthquake emergency maps is designed, including map user level, map template level, template layer level and map element level. Regrading to the architecture, the general map template of earthquake emergency is presented which includes four main regions: title region, main picture region, auxiliary region and annotation region. The main picture region is the essential, which lays geographic background maps and earthquake emergency features. Finally, an earthquake emergency mapping system is developed. Based on the system, a case study is presented, which demonstrates making a simulated seismic intensity influence map. From three aspects, the case presents the application of the template-matching method including: generating earthquake emergency features, substituting the features inside the template with the generated features, and revising map annotations. Therefore, the map template matching method is verified so that it can be used to quickly generate various earthquake emergency maps.