水热成矿流体中的短链羧酸

文中简述了天然水流体中的短链羧酸产出状况。短链羧酸地球化学的研究目前集中于沉积盆地和表生环境。根据C H O体系中某些C H O化合物的化学关系和热力学分析 ,推测深部水热流体中有可能存在短链羧酸。研究高温热液矿床矿物流体包裹体的水溶有机组分可能是检验这一推测的突破口。某些石英脉型热液矿床的矿物流体包裹体压碎浸取和离子色谱分析确定 ,成矿流体中存在少量短链羧酸 ,而且甲酸是优势物种。文章讨论了矿物包裹体浸取实验结果需要进一步探讨的问题 ,认为研究水热成矿流体短链羧酸地球化学具有重要的理论意义。     

西华山-荡坪钨铍矿床流体包裹体羧酸研究

系统研究了西华山—荡坪钨铍矿床矿物中流体包裹体温压地球化学特征,用离子色谱法测定了矿床中石英、水晶、黑钨矿、绿柱石、萤石等矿物包裹体浸取液的羧酸组成——甲酸、乙酸、丙酸和草酸,结果表明低分子量羧酸或羧酸盐是气化—高温热液矿床成矿流体中的常见组分。其中甲酸＞乙酸草酸,部分样品中有丙酸。     

华南钨锡铍矿床矿物流体包裹体中的短链羧酸

在矿物包亵体显微镜研究的基础上,用离子色谱法测定了西华山-荡坪钨铍矿、漂圹钨锡矿和珊瑚锡钨矿床某些矿物流体包裹体的羧酸(甲酸、乙酸、丙酸和草酸)组成。所有样品的浸取液中均含有一定数量的短链羧酸,甲酸是占优势的物种。所研究矿床成矿流体的阴离子组成特征可能与岩浆活动和围岩的差异有关。     

山东玲珑金矿床矿物流体包裹体中的羧酸

用离子色谱法分析了山东玲珑金矿床石英等矿物包裹体的浸取液,结果表明其中存在相当高的短链羧酸盐和少量的草酸。黄铁矿和黄铜矿浸取液中羧酸的浓度比石英浸取液的高,早期成矿阶段的矿物包裹体中一元羧酸的浓度大于主成矿阶段和晚期阶段。     

山西义兴寨金矿流体包裹体的特征及意义

对山西省义兴寨金矿的流体的流体包裹体进行了详细研究，测试样品为本区的花岗岩、花岗斑岩、多金属硫化物含金石英脉、黄铁矿含金石英脉、片麻岩和伟晶岩６种。研究发现有四个类型的流体包裹体：Ｉ１富液相气液包裹体、Ｉ２富气相气液包裹体、Ⅱ含ＣＯ２包裹体和Ⅲ含ＮａＣｌ子晶多相包裹体。     

关于高纯石英原料矿石地质学评价方法的探讨

高纯石英资源是一种重要的战略性资源。本文结合高纯石英成矿地质特征及其对后期选矿提纯、材料加工等的影响,系统总结了高纯石英原料中杂质的赋存状态、形成机理以及评价方法等,得出：(1)可以作为高纯石英原料的潜在岩石类型有花岗伟晶岩(包括不含暗色矿物的伟晶状花岗岩)、脉石英以及水晶,岩浆演化晚期的伟晶状花岗岩-伟晶岩早期阶段的NYF型花岗伟晶岩结晶形成的石英纯度更高,后期适当的变形变质作用更有利于高纯石英矿床的形成。高纯石英原料矿石中石英矿物呈现无色透明至半透明,矿物构造裂隙少,伟晶岩型矿石矿物组成通常为石英、钠长石、条纹长石、白云母等,黑云母等暗色矿物含量极少,基本不见锂辉石、独居石等稀有金属矿物和电气石、萤石等含挥发分矿物。(2)影响高纯石英的主要地质因素包括脉石矿物及晶界杂质、包裹体、晶格杂质等。其中包裹体类型、数量和尺寸是包裹体评价的关键指标,天然石英矿物中的气液两相包裹体、矿物包裹体和<10μm包裹体应尽量少;Al和Ti是晶格杂质元素评价标志性元素,通常要求天然石英矿物中Al<50×10^-6和Ti<10×10^-6。(3)建...     

江西大湖塘超大型钨矿初始岩浆流体出溶——来自似伟晶岩壳的记录

江西大湖塘地区是江南造山带中段九岭矿集区内近年查明的世界级超大型钨矿产地,白钨矿体主要呈细脉浸染状缓倾于中粗粒黑云母花岗闪长岩中。位于区内一矿带的成矿母岩顶部发育完好的似伟晶岩壳,壳层的组构特征明显,由母岩向含矿围岩,依次为似斑状黑云母花岗岩→长英质细晶岩→石英长石似伟晶岩→长石石英似伟晶岩→含白钨矿黑云母花岗闪长岩。壳内石英的阴极发光岩相学研究显示,石英巨晶、斑晶、基质和石英脉大多经历了早阶段主晶石英,中阶段扩散交代石英和晚阶段渗滤充填石英3个生长阶段。微量元素研究表明,早阶段石英的生长是一个流体加速沉淀的过程,中阶段和晚阶段流体对主晶石英均有叠加改造,其微量元素呈降低趋势。各类石英均表现为富碱金属元素、中高温（≥483℃）、低Li/Al（0.01~0.50,大多小于0.24）的地球化学特征,反映了成矿流体为岩浆水来源,石英的生长具有岩浆—热液过渡性质。综合研究表明,大湖塘一矿带似伟晶岩壳是初始含矿岩浆流体出溶的产物,其形成过程中动态的物理化学条件促进了成矿元素W由母岩向围岩搬运富集。     

中国不同类型铍矿床中绿柱石流体包裹体特征研究

采用偏光显微镜薄片观察、激光拉曼成分分析等方法, 对伟晶岩型和岩浆热液型铍矿床中绿柱石的流体包裹体进行了岩相学观察和成分分析。结果表明, 绿柱石中原生流体包裹体形态多样, 常孤立或成群沿晶体生长带定向分布, 大小从5~80 μm不等。流体包裹体类型以富液相型气液两相包裹体最常见, 其次为含液相CO2的三相包裹体和含子矿物多相包裹体, 偶见固体包裹体和熔融包裹体。其中, 伟晶岩型绿柱石中包裹体数量和种类更为丰富, 常见含子晶多相包裹体和气液包裹体共存, 岩浆热液型绿柱石中包裹体则相对较少, 可见熔融包裹体与富液相CO2流体包裹体共存。流体包裹体气相成分主要以CO2和N2为主, 液相主要为H2O和CO2以及CO2– 3、HCO– 3等离子。伟晶岩型绿柱石中常见含石英、云母、钠长石等子矿物的多相包裹体, 由伟晶岩中晶体快速结晶形成; 岩浆热液型绿柱石中的有机质气体更丰富, 与氧化剂Al2O3活度较低而形成相对还原环境有关。富含CO2、H2O成分的流体更有利于绿柱石的形成。结合流体包裹体的生成机制, 认为岩浆热液型绿柱石形成于岩浆演化晚期的热液阶段, 伟晶岩型绿柱石形成于岩浆-热液过渡→热液阶段, 绿柱石的形成机制为岩浆的结晶分异和液态不混溶作用。     

吉林延边闹枝金矿床地质特征及矿床成因

闹枝金矿床地处延边—东宁金矿带西段,为一主体产于海西期花岗闪长岩体内的石英脉型矿床。矿床地质特征及含金石英脉内流体包裹体研究结果表明,该区含金石英脉中主要发育气液两相及少量的含子矿物三相、气相--富气相包裹体。气液两相包裹体均一温度为283.5℃～375.9℃,盐度为3.4～8.13 wt%NaCl;富气相包裹体均一温度为416.5℃～431.6℃;含NaCl子矿物三相流体包裹体均一温度为303.9℃～393.2℃,盐度为38.21～45.3 wt%NaCl。包裹体氢、氧同位素分析结果表明,成矿流体以岩浆热液为主,可能混有少量大气降水。矿床成因属中温岩浆热液金矿床。     

大别山双河和碧溪岭超高压变质岩流体包裹体研究

对大别山双河和碧溪岭含柯石英榴岩和硬玉石英岩进行了详细的流体包裹体研究。根据流体包裹体的成分和盐度的不同,可以划分出至少五种类型不同的气液包裹体;（１）Ｎ２包裹体;（３）高盐度流体包裹体;（３）ＣＯ２包裹体;（４）ＣＯ２－Ｈ２Ｏ包裹体;（５）低盐度流体包裹体。本仅见于含柯石英榴辉岩,而高盐度流体包裹体则几乎存在于所有的榴辉岩和硬玉石英岩中。ＣＯ２包裹体沿榴辉岩中微剪切带分布,或存在于强变形的硬玉石     

Short-chain carboxylates in fluid inclusions in minerals

The carboxylate (formate, acetate, propionate and oxalate) and common inorganic anions (F⁻, Cl⁻ and SO²⁻₄) compositions for aqueous fluid inclusion leachates from 17 mineral samples collected from various deposits have been determined using ion chromatography in conjunction with microthermometric measurements on the fluid inclusions of their host minerals. The minerals, quartz, fluorite, barite, beryl and a few `ore' minerals (wolframite, pyrite and galena), came from hydrothermal vein-type deposits in felsic igneous rocks or Archean metamorphic rocks. The results indicate that short-chain carboxylates are common components in hydrothermal fluids and can be present in considerable amounts. Formic acid (as formate) is the dominant species over other carboxylic acids. The present study raises new questions about the origin and geochemical significance of carboxylates in hydrothermal ore-forming processes.     

矿物流体包裹体中的羧酸

矿物流体包裹体中的羧酸曾贻善刘家齐（北京大学地质系，北京１００８７１）（地矿部宜昌地质矿产研究所，宜昌４４３００３）关键词矿物包裹体浸取液羧酸离子色谱分析分子中含有羧基官能团（—ＣＯＯＨ）的物质称为羧酸。Ｆｅｉｎ［１］和Ｓｈｏｃｋ［２］曾概述羧酸在自...     

Temperatures and Oxygen Isotopic Compositions of Hydrothermal Fluids for the Takatori Tungsten-copper Deposit, Japan

Abstract. Fluid inclusion and oxygen isotope studies are performed to obtain temperatures and oxygen isotopic compositions of hydrothermal fluids for the vein-type tungsten-copper deposit at Takatori in Ibaraki Prefecture, Japan. Temperatures of the hydrothermal fluids are calculated from fluid inclusion data. The calculation incorporates the effects of the salinity, gas concentration, and fluid pressure. The fluid temperatures range from 370 to 460C. For these calculations, this study obtains a density equation for H₂O-NaCl-CO₂ solution at the vapor-liquid two-phase boundary. Then the present study combines the obtained equation with the equation of state by Bowers and Helgeson (1983).
The fluid temperatures determined in this study are applied to the calculation of oxygen isotopic compositions of the hydrothermal fluids. The calculation of the oxygen isotopic compositions is based on the oxygen isotope analyses of vein quartz. The oxygen isotopic compositions of vein quartz range from +13.5 to +14.4 % relative to SMOW. Then, the oxygen isotopic compositions of the hydrothermal fluids in equilibrium with the vein quartz are calculated to be from +9.7 to +10.5 %. These δ¹⁸O_fluid values agree with those of magmatic fluids derived from the ilmenite-series granitic rock, which is related to the mineralization. Keywords: Takatori tungsten-copper deposit, fluid inclusion, oxygen isotope, vein quartz, H₂O-NaCl-CO₂ solution, density     

辽宁省盖县猫岭金矿床地质特征及成因探讨

猫岭金矿床赋存于早元古代辽河群盖县组变质岩系内,空间上与印支期猫岭似斑状花岗岩体关系密切,两者相距仅0.2km,花岗岩体本身有金矿化及蚀变现象。矿床的成矿热液为一种氧逸度较低、富集碱金属及卤族(特别是Cl)元素的热液,其δD=-77——80‰,δ¹⁸O=6.05-7.38‰,δ³⁴S=6.15-10.3‰。矿床的矿石铅与猫岭花岗岩体长石铅的同位素组成不尽一致。根据上述特征可认为:猫岭金矿床为与中生代花岗岩有关的、典型的岩浆热液型金矿床,但金属成矿物质除成矿热浪本身带来外,部分还由成矿热液萃取自容矿围岩-辽河群盖县组。     

Ore‐Forming Fluids as Sampled by Sulfide‐ and Quartz‐Hosted Fluid Inclusions in the Jinwozi Lode Gold Deposit,Eastern Tianshan Mountains of China

The Jinwozi lode gold deposit in the eastern Tianshan Mountains of China includes auriferous quartz veins and network quartz veins that are exemplified by the Veins 3 and 210, respectively. This paper presents H‐, O‐isotope compositions and gas compositions of fluid inclusions hosted in sulfides and quartz, and S‐, Pb‐isotope compositions of sulfide separates collected from the principal Stage 2 ores in Veins 3 and 210. Fluid inclusions trapped in quartz and sphalerite are pseudo‐secondary and primary. They were trapped from the fluids during the successive or alternate precipitation of quartz with sulfides. H‐ and O‐isotope compositions of fluid inclusion of three pyrite and one quartz separates from Vein 210 plot within the field of degassed melt, which is evidence for the incorporation of magmatic fluid as well with some possibility of contribution of metamorphic water to the hydrothermal system since the two datasets show a higher oxygen isotopic ratio than those of degassed melt. However, δD and δ¹⁸O values of fluid inclusions hosted in sulfides and quartz from Vein 3 are distinctly lower than those from Vein 210. In addition, salinities of fluid inclusion from Vein 3, approximately 3 to 6 wt% NaCl equivalent, are considerably lower than those from Vein 210, which are approximately 8 to 14 wt% NaCl equivalent. Ore‐forming fluids of Veins 3 and 210 have migrated through the relatively high and low levels in the imbricate‐thrust column where rock deformation is characterized by dilatancy or ductile–brittle transition, respectively. Therefore, the ore‐forming fluid of Vein 3 is interpreted to have mixed with greater amounts of meteoric‐derived groundwater than that of Vein 210. Fluid inclusions hosted in sulfides contain considerably higher abundances of gaseous species of CO₂, N₂, H₂S, and so on, than those hosted in quartz. Many of these gaseous species exhibit linear correlations with H₂O. These linear trends are interpreted in terms of mixing between magmatic fluid and groundwater. The relative enrichment of gaseous species in fluid inclusions hosted in sulfides, coupled with the banded ore structure, suggests that the magmatic fluid was involved with the ore‐forming fluid in pulsation. Lead isotope compositions of 21 pyrite and galena separates form a linear trend, suggesting mixing of metallic materials from diverse reservoirs. The δ³⁴S values of pyrite and galena range from +5.6‰ to +7.9‰ and from +3.1‰ to +6.3‰, respectively, indicating sulfur of the Jinwozi deposit has been leached mainly from the granodiorite and partly from the Jinwozi Formation by the circulating ore‐forming fluid.     

Cl/Br ratios and stable chlorine isotope analysis of magmatic–hydrothermal fluid inclusions from Butte,Montana and Bingham Canyon,Utah

A bulk geochemical study has been carried out on fluid inclusion leachates extracted from quartz veins from porphyry Cu deposits in Butte, Montana, USA and Bingham Canyon, Utah, USA. The leachates mostly represent low-salinity magmatic–hydrothermal fluid inclusions. Their halogen ratios (Br/Cl) of fluid inclusion leachates were determined by ion chromatography, and δ³⁷Cl values of the leachates were measured by continuous-flow isotope ratio mass spectrometry. Br/Cl ratios from early pre-Main stage and later Main stage veins at Butte range from 0.60 to 1.88 × 10⁻³ M. Ratios are similar in pre-Main stage veins with sericite bearing selvages and Main stage samples ranging from 0.81 to 1.08 × 10⁻³ and from 0.92 to 1.88 × 10⁻³ M, respectively, clustering below seawater (1.54 × 10⁻³ M) and overlapping mantle values (~1–2 × 10⁻³ M). Two samples associated with early pre-Main stage potassic alteration yield distinctly lower Br/Cl ratios of 0.60 and 0.64 × 10⁻³ M. Butte δ³⁷Cl values range from −0.8‰ to −2.3‰ with no significant difference between pre-Main stage and Main stage samples. Br/Cl ratios for quartz veins from Bingham Canyon range from 0.18 to 3.68 × 10⁻³ M. Br/Cl ratios from Bingham range above and below previously reported for porphyry copper deposits. In contrast to Butte, δ³⁷Cl values for Bingham are lower, ranging from −0.9‰ to −4.1‰. In the absence of any processes which can significantly fractionate chlorine isotopes at high temperatures, we suggest that the porphyry system at Bingham, and to a lesser extent at Butte, have inherited negative chlorine isotopic signatures from the subducting slab generated at low temperatures.     

湘赣边界鹿井铀矿床流体包裹体及成矿机制

位于南岭成矿带南西部的鹿井矿床是华南热液型铀矿的典型代表.为查明其成矿流体来源、性质与演化以及成矿机制,开展了不同成矿阶段石英、萤石及方解石中流体包裹体的显微测温和不同阶段石英的氢?氧同位素分析.矿床地质特征表明成矿过程可划分为(I)粗晶石英+黄铁矿±绿泥石±绢云母、(II)沥青铀矿+硫化物+绿泥石+绢云母+暗灰色微晶...     

The Ore-forming Fluid of the Gold Deposits of Muru Gold Belt in Eastern Shandong, China - a Case Study of Denggezhuang Gold Deposit

Abstract. Denggezhuang gold deposit is an epithermal gold‐quartz vein deposit in northern Muru gold belt, eastern Shandong, China. The deposit occurs in the NNE‐striking faults within the Mesozoic granite. The deposit consists of four major veins with a general NNE‐strike. Based on crosscutting relationships and mineral parageneses, the veins appear to have been formed during the same mineralization epochs, and are further divided into three stages: (1) massive barren quartz veins; (2) quartz‐sulfides veins; (3) late, pure quartz or calcite veinlets. Most gold mineralization is associated with the second stage. The early stage is characterized by quartz, and small amounts of ore minerals (pyrite), the second stage is characterized by large amounts of ore minerals. Fluid inclusions in vein quartz contain C‐H‐O fluids of variable compositions. Three main types of fluid inclusions are recognized at room temperature: type I, two‐phase, aqueous vapor and an aqueous liquid phase (L+V); type II, aqueous‐carbonic inclusions, a CC₂‐liquid with/without vapor and aqueous liquid (LCO₂+VCC₂+Laq.); type III, mono‐phase aqueous liquid (Laq.). Data from fluid inclusion distribution, microthermometry, and gas analysis indicate that fluids associated with Au mineralized quartz veins (stage 2) have moderate salinity ranging from 1.91 to 16.43 wt% NaCl equivalent (modeled salinity around 8–10 wt% NaCl equiv.). These veins formatted at temperatures from 80d? to 280d?C. Fluids associated with barren quartz veins (stage 3) have a low salinity of about 1.91 to 2.57 wt% NaCl equivalent and lower temperature. There is evidence of fluid immiscibility and boiling in ore‐forming stages. Stable isotope analyses of quartz indicate that the veins were deposited by waters with δ^O and δD values ranging from those of magmatic water to typical meteoric water. The gold metallogenesis of Muru gold belt has no relationship with the granite, and formed during the late stage of the crust thinning of North China.