火灾中集装箱船剩余极限强度研究

采用ISO规定的火灾的标准温度—时间曲线建立船体结构的火灾模型。基于能量守恒原理建立热传导微分方程,计算热传导、对流和辐射对结构温度分布的影响。考虑火灾发生位置的差异性,分析得到着火区域的温度场。根据高温下钢材的力学性能,针对火灾发生位置的不同,利用非线性有限元方法,分析火灾对集装箱船剩余弯曲极限强度(中拱、中垂)的影响。结果表明,集装箱船不同位置发生火灾时,对船体结构极限强度的影响具有显著差异。船舱某一位置发生火灾时,对船体梁中拱和中垂极限强度的影响也分别不同。对集装箱船火灾的瞬态分析结果表明,火灾对船体梁极限强度的衰减作用主要发生在火灾发展过程中的前期,船体梁极限强度的衰减速度随火灾发展的时间逐渐减慢。     

钢梁和钢混凝土组合梁在温度载荷作用下的响应

梁体在火作用下的响应取决于许多因素,包括约束条件和梁体的性质.应用温度升高时钢材和混凝土的非线性应力-应变关系,基于能量守恒原理,建立有限差分平衡方程,在合理确定钢材和混凝土热工参数基础上,分别分析三面受火、一面受力的两端为固定铰支座钢梁和钢混凝土组合梁的响应,得到2种约束梁体在温度载荷作用下响应的异同点,为进一步研究火灾下钢梁和钢混凝土结构的力学性能和抗火极限提供参考.     

海洋平台T型相贯节点抗火性能研究

利用有限元软件ABAQUS计算海洋平台T型相贯节点在火灾作用下的极限承载力,并对T型相贯节点进行火灾作用下的抗火性能及节点在降温段的力学性能分析,得出在不同火灾温度下节点的极限承载力.同时对计算结果进行了分析比较,通过参数分析,得到了T型相贯节点在火灾作用下节点极限承载力的变化规律.     

软粘土中插入式大直径薄壁圆筒结构的一种极限状态分析模型

根据插入式大直径薄壁圆筒结构的工作特点建立了其合理的破坏机制，以此为基础建立了受横向荷载作用的插入式大直径薄壁圆筒结构的上限法极限分析模型，从中可以得到作用于插入式大直径薄壁圆筒结构上的横向极限荷载近似的上限解；并根据上限法模型计算结果，提出了计算受横向荷载作用的插入式大圆筒结构侧壁极限抗力的简化修正模型，利用此修正模型，基于极限平衡法，可以求解作用于插入式大直径薄壁圆筒结构上的横向极限荷载。     

海洋平台油气火灾爆炸机理及其结构响应特性研究进展

火灾、爆炸等重大灾害条件下海洋平台结构风险评估涉及众多学科和研究领域,一直是国内外学者关注的热点问题。从试验、爆炸模型和火灾/爆炸平台结构载荷与结构响应研究等方面,综述近年来国内外在海洋平台油气火灾、爆炸机理及其作用下平台结构力学行为及响应特性研究方面的现状与最新进展,评述这些进展的科学性与局限性,指出海洋平台环境条件下火灾/爆炸机理及其对平台结构影响研究的特点以及存在的问题,并展望海洋工程重大灾害及结构风险研究领域的热点问题和发展趋势。     

复合加载下桶形基础循环承载性能数值分析

作为一种新型基础形式,吸力式桶形基础除了承受海洋平台结构及自身重量等竖向荷载的长期作用之外,往往还遭受波浪等所产生的水平荷载及其力矩等其它荷载分量的瞬时或循环作用。对复合加载模式下软土地基中桶形基础及其结构的循环承载性能尚缺乏合理的分析与计算方法。应用Andersen等对重力式平台基础及地基所建议的分析方法,基于软黏土的循环强度概念,在大型通用有限元分析软件ABAQUS平台上,通过二次开发,将软土的循环强度与Mises屈服准则结合,针对吸力式桶形基础,基于拟静力分析建立了复合加载模式下循环承载性能的计算模型,并与复合加载作用下极限承载性能进行了对比。由此表明,与极限承载力相比,桶形基础的循环承载力显著降低。     

考虑二阶波浪荷载效应的海上TLP浮式风机分析

基于多数专业风机数值模拟软件只可进行一阶波浪荷载计算这一缺点,文中将以AQWA为基础,利用其可进行二次开发的技术优势,通过实时调用风机气动荷载,实现海上TLP浮式风机分析。分析中,浮式风机平台一阶、二阶波浪荷载由AQWA计算,实时调用的气动荷载由动态链接库提供。该动态链接库主要包含了根据叶素动量定理自行编译的气动荷载计算程序。经过与FAST比较,得知该方法能满足分析需求。垂荡、纵摇力的二阶效应尤为明显。仅计算浮式风机平台波浪荷载时,可以不考虑风荷载的影响,但必须考虑平台运动的影响,波浪荷载主要受纵荡、纵摇运动影响,几乎不受垂荡运动的影响;当研究浮式风机平台运动时,必须考虑风荷载和二阶波浪荷载的影响,二阶波浪荷载使得平台响应在整个频率范围内都明显增大。张力筋腱张力受二阶波浪荷载的作用更明显。     

锥体导管架海洋平台冰激振动的DEM-FEM耦合分析及高性能算法

在寒区海域,冰荷载是影响海洋平台安全运行的主要环境荷载之一,由其引起的冰激振动给平台结构及其上部设备带来了严重危害。为分析不同冰况下平台的振动响应,本文建立了导管架海洋平台冰激振动的离散元（DEM）-有限元（FEM）耦合模型。采用具有黏接-破碎性能的等粒径球体离散单元对海冰的破碎特性进行模拟,通过由梁单元构建的海洋平台有限元模型获得结构的振动响应。在离散元与有限元的接触区域中实现了两个模型间计算参数的传递。为提高该耦合模型的计算效率和规模,发展了基于动力子结构方法的DEM-FEM耦合模型。为验证该耦合模型的有效性和可行性,将不同冰况下得到的冰荷载与ISO19906和JTS 144-1-2010标准进行了对比。结果表明,计算得到的冰荷载与标准相近,且冰厚与冰荷载呈二次非线性关系。同时,从冰速和冰厚两方面对比了渤海四桩腿JZ20-2 MUQ锥体导管架平台冰激振动加速度的数值结果和现场实测数据,发现冰速与振动加速度呈线性关系,冰厚与振动加速度呈二次非线性关系,并且振动加速度与冰速和冰厚平方的乘积呈线性关系。     

海上浮式风机气动性能数值模拟

采用计算流体动力学(CFD)方法,基于RANS方程和SST k-ω湍流模型,对OC3-Hywind Spar浮式平台支撑的NREL5 MW风机进行气动性能模拟。对固定式风机的数值模型做网格无关性验证,同时考虑垂直风切变的影响,并将数值结果与NREL设计数据进行对比以验证模型的有效性。在FLUENT软件中,设定嵌入式滑移网格和用户定义程序(UDF)来模拟风机叶轮随平台的周期运动,分别研究浮式平台的纵荡、纵摇和首摇运动对风机气动荷载的影响。数值结果表明平台的纵荡和纵摇运动对输出功率影响较大,且平台运动幅值越大周期越低,其气动荷载变化越剧烈。合理控制平台的运动幅值对提高浮式风机的发电性能和疲劳强度有很大作用。     

嵌入式筒型结构抗倾稳定性简化计算方法

针对嵌入式筒型结构在淤泥质海床上的工作机理,建立其在软土地基上的理论计算模型,提出适用于该模型的土压力、摩阻力、地基反力的计算方法,由静力平衡方程,求解得到维持结构稳定的水平极限荷载。通过ANSYS数值模拟软件进行分析,并通过荷载位移曲线找到结构发生倾覆破坏时的极限荷载,对理论计算进行验证。     

火灾烟颗粒分形模型和球形模型光散射的比较研究

对烟颗粒的光散射进行模拟计算是研究火灾烟颗粒光散射特性的重要手段,目前对于火灾烟颗粒光散射的数值计算多采用球形或椭球模型.实际上,火灾烟颗粒的形貌与球形和椭球均存在着显著差异.扫描电子显微镜图像表明,烟颗粒具有近似分形的结构.本文利用离散偶极近似方法计算了随机取向的火灾烟颗粒分形凝团以及同体积的球形颗粒的光散射Muller矩阵,并对两者的归一化Muller矩阵元素随散射角的分布进行了比较.研究表明:火灾烟颗粒分形模型和球形模型的归一化矩阵元素F₁₁(θ)/F_{11相似文献}   

基于数据挖掘分析许芝银治疗阴虚火旺型甲状腺功能亢进症的用药规律

目的：运用数据挖掘技术分析许芝银教授辨治阴虚火旺型甲状腺功能亢进症的临床用药规律。方法：收集整理2018年1月1日至2020年6月30日江苏省中医院许教授门诊诊治的阴虚火旺型甲状腺功能亢进症患者病案资料,构建临床用药数据库,运用数据挖掘方法,对其临证用药规律进行总结分析。结果：共收集到许教授治疗阴虚火旺型甲状腺功能亢进症的有效验方642首,涉及药物133味,累计用药频数9180次。获得高频药物（使用频次≥120次）24味,使用频次排前6位的药物依次是赤芍、牡丹皮、白芍、甘草、丹参、麦冬;药物药性以温、寒、平为主,药味以甘、苦、辛为多,归经多属肝、肺、脾经,药物分类以补虚药、清热药为主。高频药物系统聚类聚为6类,药物二项关联分析显示核心药对6对,三项关联度最强的核心药物组合4组。结论：许教授临证围绕阴虚火旺型甲状腺功能亢进症的病因病机,从消瘿散结、清热泻火、养阴益气入手,提出瘿肿宜消散、纳亢宜清泻、多汗宜固表、目突宜明目、手颤宜息风、心悸宜宁神六法,同时兼顾扶正祛邪,攻补兼施,用药平和,疗效肯定。     

Load characteristics of steel and concrete tubular members under jet fire: An experimental and numerical study

The aim of this study was to evaluate the load characteristics of steel and concrete tubular members under jet fire, with the motivation to investigate the jet fire load characteristics in FPSO topsides. This paper is part of Phase II of the joint industry project on explosion and fire engineering of FPSOs (EFEF JIP) ( [Paik and Czujko, 2009] and [Paik, 2010]). To obtain reliable load values, jet fire tests were carried out in parallel with a numerical study. Computational fluid dynamics (CFD) simulation was used to set up an adiabatic wall boundary condition for the jet fire to model the heat transfer mechanism. A concrete tubular member was tested under the assumption that there is no conduction effect from jet fire. A steel tubular member was tested and considered to transfer heat through conduction, convection, and radiation. The temperature distribution, or heat load, was analyzed at specific locations on each type of member. ANSYS CFX, (2008) and KFX, 2007 codes were used to obtain similar fire action in the numerical and experimental methods. The results of this study will provide a useful database to determine design values related to jet fire.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.