深海设备回收过程运动响应研究

针对深海油气设备回收过程中通过深水区、波浪区以及出水阶段,建立水面起重船—吊缆—回收设备系统耦合运动数学模型。分析起重船和回收设备运动受力情况,推导相应的运动方程,并通过数值求解,分析起重船垂荡及纵摇的变化曲线,回收设备垂向位移变化曲线及吊缆张力变化曲线,考察起重船在波浪中运动对吊缆及回收设备产生的影响。通过工程实例进行计算分析,结果表明,在深海油气设备回收过程中,设备通过深水区时整个耦合系统处于相对比较安全的状态,而设备出水前及出水过程是回收作业较为危险阶段,此时应避免吊缆由于突变载荷作用发生断裂的情况。     

深海采矿系统长距离垂直输运管道力学性能研究

深海采矿系统中的长距离垂直输运管道在工作中具有复杂的流固耦合力学特性,在生产作业中其结构安全性和可靠性面临严峻考验。建立深海采矿系统从海底到水面的完整模型,采用集中质量法对于其中的长距离垂直输运管道的环境载荷进行了研究,并将计算结果与模型试验测量值进行对比验证,重点分析管道顶部轴向张力和剪力的大小关系以及变化规律。分析结果表明:在深海采矿系统的长距离垂直输运管道中,轴向张力在结构载荷占主要成分,由波浪引起的结构轴向张力增加会达到管体自重的38%～48%。因此,选择合适的作业工况对降低结构载荷,加强结构安全性能有很大帮助。     

深海布放缆不同材料属性下应力波自由传播频率特性影响研究

在频域对深海布放缆系统内应力波自由传播特性进行了分析。在布放缆数学建模时使用了哈密顿原理,并在建模时考虑布放缆的曲率。计算过程中保留了缆绳曲率与其弧长坐标之间的非线性关系,并最后得到了其上传播的应力纵波与应力横波的特性。通过计算得到布放缆属性和缆绳内竖直张力等参数对缆绳内自由传播频率特性的影响曲线。结果表明,这些因素对自由传播应力波的频率关系、色散关系、相速度与群速度影响显著。对于应力纵波,整个频域可被两个截止频率与一个行波截止频率分成四个区域。除了通频带之外,在低频时亦存在抑止带和行波抑止带。应力纵波仅能在通频带中以行波形式传播,而应力横波则可以在所有频率范围内以行波形式传播。     

随机波浪下遥控潜水器强非线性耦合空间运动与缆索安全性研究

模拟了带有脐带缆的潜水器(ROV)的强非线性流体动力学性能,由于ROV的前进速度与其它方向的运动速度为同一数量级,与传统的潜艇有重要的区别。潜艇中常用的按前进航速线性化处理的技术不能有效地用于潜水器,必须保留其运动方程中尽可能多的非线性项进行模拟。潜器本体的运动模型必须考虑为六自由度,脐带缆的运动必须考虑为三维运动。中继平台的运动幅值,可能会接近甚至超过水面船的运动幅值,这会增加ROV进出坞的困难。缆力对流速比对水面波浪更敏感、对垂向激励比水平激励更敏感。即使是随机波浪激励,深水吊索张力也会具有一定的周期性。近水面时这种周期性消失,两端张力趋于同步。     

母船垂荡导致ROV脐带缆参量共振的研究

研究有缆遥控潜水器(Remote Operated Vehicles)的脐带缆受到轴向激励所产生的大幅横向振动,即参量共振.ROV脐带缆的参激现象发生会影响ROV的安全性.针对ROV脐带缆的结构特性,推导出其在轴向激励力下的非线性振动方程.运用希尔无穷行列式的方法分析脐带缆的参量不稳定性.以稳定性图为基准分析脐带缆在多...     

深海ROV多层脐带缆绞车卷筒力学分析

通过对深海ROV脐带缆微元段受力情况的分析,基于简化理论模型的假设,建立了能够模拟脐带缆绞车卷筒受力情况的理论模型。对比某绞车的实验数据,验证了本力学模型的正确性。通过对实例的计算分析,能够为深海ROV脐带缆绞车的设计工作提供理论支持。     

21世纪美国海军的调查船

21世纪初,美国海军海洋局(NAVOCEANO)将操作2种新级别的调查船:T-AGS 60级和T-AGS 51级.这两种级别的调查船设计成能在深海和沿海区域作业,完成各种多项任务,包括:①带缆和自律科研成套设备的布放、回收和拖曳,包括遥控潜器的吊放、监视和服务;②船上海洋数据处理与样品分析;③支持深海和沿海测量的精密导航、测线和定位;④水文测量艇(HSLs)的布放与回收.     

深海观测系统脐带缆形态分析及计算

通过对水下拖曳系统脐带缆索的受力情况、形态进行分析，建立了三维空间缆索的物理模型和数学模型，并在此基础上编制了计算程序，对6000m深海观测系统脐带缆的性状进行了模拟计算，其结果为深拖系统最佳缆长的确定提供了理论依据。     

荔湾3-1气田深水脐带缆竖直铺设技术研究与应用

随着海洋油气开发逐步走向深海,深水脐带缆的应用越来越广泛。我国在脐带缆安装工程中仅具备浅水(300 m以内)水平铺设的能力,深水脐带缆的铺设技术在国内尚属空白。本文以荔湾3-1气田深水脐带缆铺设工程为例,首先介绍铺设方法的选取原则,提出深水脐带缆竖直铺设的技术要求,随后基于Orca Flex软件,对脐带缆铺设进行静力和动力分析,为铺设期间脐带缆长度和张力的监控、作业气候窗的选取提供参考依据。最后制定脐带缆起始抽拉、正常铺设以及末端铺设的作业流程。该工程为我国首次采用脐带缆竖直铺设技术,本文研究成果和计算方法可为国内其它同类工程提供重要借鉴意义。     

基于多阶段贝叶斯网络法的脐带缆全寿命周期可靠性分析

脐带缆是深海油气开发的关键设备之一,主要由钢管单元、电缆单元、光缆单元、护套及铠装单元组成。脐带缆在全寿命周期经过设计制造、储存、安装、在位运行、修复阶段,其每个阶段的可靠性并不是某个常数,而是随时间变化的函数,因此有必要对脐带缆全寿命周期可靠性的变化进行分析。建立某气田水下脐带缆在储存、安装、在位运行阶段的故障树模型,将其转化为多阶段贝叶斯网络模型进行建模分析,基于OREDA手册数据,假设部件寿命服从指数分布,对脐带缆存储、安装、在位运行阶段的可靠性进行分析,得到不同阶段脐带缆可靠性的变化曲线,并与可靠性框图方法进行对比分析。同时,通过引入条件可靠性对该方法进行了优化,分析脐带缆修复后的可靠性变化,以及对脐带缆关键部件进行重要度分析,针对薄弱环节提出改进措施。可靠性分析可为水下脐带缆的安全运行提供技术支持,同时也为海洋结构与设备的全寿命周期可靠性分析提供了一种方法参考。     

A Geometrically Exact Formulation for Three-Dimensional Numerical Simulation of the Umbilical Cable in A Deep-Sea ROV System

This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle (ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized- implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current.     

A Geometrically Exact Formulation for Three-Dimensional Numerical Simulation of the Umbilical Cable in A Deep-Sea ROV System

This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle(ROV) system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized-a implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current.     

Umbilical cable recovery load analysis

Umbilical cable is a kind of integrated subsea cable widely used in the exploration and exploitation of oil and gas field. The severe ocean environment makes great challenges to umbilical maintenance and repair work. Damaged umbilical is usually recovered for the regular operation of the offshore production system. Analysis on cables in essence is a two-point boundary problem. The tension load at the mudline must be known first, and then the recovery load and recovery angle on the vessel can be solved by use of catenary equation. The recovery analysis also involves umbilical-soil interaction and becomes more complicated. Calculation methods for recovery load of the exposed and buried umbilical are established and the relationship between the position of touch down point and the recovery load as well as the recovery angle and recovery load are analyzed. The analysis results provide a theoretical reference for offshore on-deck operation.     

Analysis on Motion and Cable Dynamic Tension for An ALT-Tanker System

A two-degree freedom model for an ALT-tanker system is established corresponding to the pitch of the ALT and the surge of the tanker.Tension in the mooring cable between the ALT and the tanker is represented by an unsymmetrical,piecewise-nonlinear function.Wave load on the tower is evaluated by use of the Morison equation.The first order wave load acting on the tanker is calculated by the linear diffraction theory based on the 2-D Helmholtz equation,and the near field approach of Pinkster is used to evaluate the second order drift force.The dynamic equation of motion is established based on the principle of D'lembert.Dynamic response and cable tension of a mooring system composed of an 88.4 m ALT and a 100000 t grade tanker are calculated.The influence of wave frequency,wave excitation amplitude,wind and current force on ALT-tanker motion and cable tension is discussed.     

钢管脐带缆扭转平衡设计

钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。     

绷紧式系泊缆冲击张力特性研究

采用集中质量法研究了绷紧式系泊系统中系缆由于松弛-张紧过程产生的冲击张力。建立系泊缆绳离散的集中质量模型,对其独立单元进行受力分析并建立了单元的运动方程。给定缆绳上端点简谐激励,通过Ansys中的Aqwa模块,分析了缆绳的运动响应;针对缆绳运动响应过程中的三种状态进行了模拟计算,探讨了冲击张力产生的条件;研究了缆绳初始预张力、上端点激励幅值和频率、拖曳力系数、弹性模量以及单位长度质量对动态张力的影响。研究结果表明:这些影响因素不仅会影响缆绳动态张力的大小,也会对缆绳中的冲击张力产生一定的影响。     

深海遥控潜水器多体系统非线性耦合动力特性模拟

建立带缆遥控潜水器(TROV)系统空间运动模型,探讨支持船-吊缆-中际站-脐带缆-潜水器多体之间的强非线性耦合运动机理。潜器的运动考虑为六自由度,缆索分段的三维动态方程中采用了"凝集参数"模型与平均切向量非线性流体动力载荷处理技术,通过计算非均匀缆索的动张力和瞬态构型,预报导致脐带缆保护层及其内部光电传输芯线结构破坏的巨大瞬间突变载荷,对避免谐振,延长缆索寿命和最大限度地扩大ROV系统安全操作的范围,确保潜水器安全入坞和回收,节约试验费,避免作业事故都具有重要意义。     

遥控水下机器人脐带缆收放绞车设计及牵引力分析

脐带缆收放技术是有缆遥控水下机器人的一项关键技术,该技术直接影响水下机器人载体的收放及作业过程中脐带缆的安全。针对目前水下机器人收放系统中脐带缆收放技术的特点,给出了一种具有自动排缆、低张力缠绕、能够提供大牵引力和安全制动功能的紧凑新式脐带缆绞车方案,并对牵引绞车与储藏绞车之间脐带缆张力与牵引绞车的牵引力进行了理论分析,给出了二者之间的关系函数。     

不同浪向下脐带缆与主平台回接过程中的动力学响应

参考文昌油气田的脐带缆截面设计及具体工作环境参数,利用水动力分析软件OrcaFlex建立了文昌缆与主平台回接过程中的动力学响应模型,计算了在不同浪向下脐带缆在与主平台回接过程中的水动力响应。通过水动力分析结果可知:绞车的牵引速度和浪向的改变对脐带缆的牵拉过程有很大影响;脐带缆发生明显弯曲的部位von mises应力也会发生明显变化,但应力仍小于API 2RD的允许应力,可满足工程安全要求。     

Experimental Study and Fatigue Analysis of Vortex-Induced Vibration of Umbilical Cable Considering Internal Friction

In order to investigate the effect of internal friction of umbilical cable on its vortex-induced vibration(VIV)responses, the experimental study on VIV of bond umbilical cable(BUC) and un-bond umbilical cable(UBUC) was carried out in an experimental tank. A current generator in the laboratory simulated the uniform current, and the current velocities were observed in real time by using a Doppler Velocimeter. In addition, different sizes of top tension were applied to the umbilical cable model. The VIV responses of the umbilical cable model were measured by using Fiber Bragg grating(FBG) strain sensors. The displacement responses of umbilical cable model were reconstructed based on the experimental strain data processed by modal superposition method. In this paper, the traveling wave characteristics, the spatial-temporal distribution characteristics of frequency and fatigue damage of the BUC and UBUC under VIV are studied. The experimental results show that there are obvious differences between BUC and UBUC in the response characteristics of VIV. The UBUC appears the traveling wave sooner than BUC, but its standing wave characteristics are more obvious than those of BUC at high velocities. Compared with BUC, the spatial-temporal distribution of UBUC frequencies appears wide-band distribution sooner, but has narrower bandwidth in the "lock-in" state. The level of fatigue damage of BUC was approximately the same as that of UBUC.