Relative timing of deformation and two-stage gold mineralization at the Hutti Mine, Dharwar Craton, India

Gold mineralization at Hutti is confined to a series of nine parallel, N–S to NNW–SSE trending, steeply dipping shear zones. The host rocks are amphibolites and meta-rhyolites metamorphosed at peak conditions of 660±40°C and 4±1 kbar. They are weakly foliated (S₁) and contain barren quartz extension veins. The auriferous shear zones (reefs) are typically characterized by four alteration assemblages and laminated quartz veins, which, in places, occupy the entire reef width of 2–10 m, and contain the bulk of gold mineralization. A <1.5 m wide distal chlorite-sericite (+biotite, calcite, plagioclase) alteration zone can be distinguished from a 3–5 m wide proximal biotite-plagioclase (+quartz, muscovite, calcite) alteration zone. Gold is both spatially and temporally associated with disseminated arsenopyrite and pyrite mineralization. An inner chlorite-K-feldspar (+quartz, calcite, scheelite, tourmaline, sphene, epidote, sericite) alteration halo, which rims the laminated quartz veins, is characterized by a pyrrhotite, chalcopyrite, sphalerite, ilmenite, rutile, and gold paragenesis. The distal chlorite-sericite and proximal biotite-plagioclase alteration assemblages are developed in microlithons of the S₂–S₃ crenulation cleavage and are replaced along S₃ by the inner chlorite-K-feldspar alteration, indicating a two-stage evolution for gold mineralization. Ductile D₂ shearing, alteration, and gold mineralization formed the reefs during retrograde evolution and fluid infiltration under upper greenschist to lower amphibolite facies conditions (560±60°C, 2±1 kbar). The reefs were reactivated in the D₃ dextral strike-slip to oblique-slip environment by fault-valve behavior at lower greenschist facies conditions (ca. 300–350°C), which formed the auriferous laminated quartz veins. Later D₄ crosscutting veins and D₅ faults overprint the gold mineralization. The alteration mineralogy and the structural control of the deposit clearly points to an orogenic style of gold mineralization, which took place either during isobaric cooling or at different levels of the Archean crust. From overlaps in the tectono-metamorphic history, it is concluded that gold mineralization occurred during two tectonic events, affecting the eastern Dharwar craton in south India between ca. 2550 – 2530 Ma: (1) The assemblage of various terranes of the eastern block, and (2) a tectono-magmatic event, which caused late- to posttectonic plutonism and a thermal perturbation. It differs, however, from the pre-peak metamorphic gold mineralization at Kolar and the single-stage mineralization at Ramagiri. Notably, greenschist facies gold mineralization occurred at Hutti 35–90 million years later than in the western Dharwar craton. Editorial handling: G. Beaudoin     

Quartz and sheet-silicate preferred orientations of low symmetry, Pikikiruna Schist, New Zealand

The Pikikiruna Schist of Nelson, New Zealand, displays a fabric in which the patterns of quartz c-axes, the poles to planes of inequidimensional quartz grains, and the statistical maxima of poles to sheet-silicate cleavages are oblique to each other. The quartz c-axes patterns consist of type-1 and type-2 crossed-girdles. The triclinic fabric can be explained in terms of one complex rotational deformation of an essentially plane strain nature. Rotation of approximately 90° about the intermediate strain-axis was combined at a late stage with subsidiary rotations about the extension axis. The quartz c-axes patterns can be related to the kinematic framework rather than the finite strain-axes. On the other hand, the dimensional quartz preferred orientation may be closely related to the finite strain-axes, though the quantity of strain can not be measured because of recrystallisation.     

Genesis of the Bangbu Orogenic Gold Deposit,Tibet: Evidence from Fluid Inclusion,Stable Isotopes,and Ar-Ar Geochronology

The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).     

Mineralogy of the Boroo Gold Deposit in the North Khentei Gold Belt,Central Northern Mongolia

Mineral assemblages and chemical compositions of ore minerals from the Boroo gold deposit in the North Khentei gold belt of Mongolia were studied to characterize the gold mineralization, and to clarify crystallization processes of the ore minerals. The gold deposit consists of low‐grade disseminated and stockwork ores in granite, metasedimentary rocks and diorite dikes. Moderate to high‐grade auriferous quartz vein ores are present in the above lithological units. The ore grades of the former range from about 1 to 3 g/t, and those of the latter from 5 to 10 g/t, or more than 10 g/t Au. The main sulfide minerals in the ores are pyrite and arsenopyrite, both of which are divisible into two different stages (pyrite‐I and pyrite‐II; arsenopyrite‐I and arsenopyrite‐II). Sphalerite, galena, chalcopyrite, and tetrahedrite are minor associated minerals, with trace amounts of bournonite, boulangerite, geerite, alloclasite, native gold, and electrum. The ore minerals in the both types of ores are variable in distribution, abundance and grain size. Four modes of gold occurrence are recognized: (i) “invisible” gold in pyrite and arsenopyrite in the disseminated and stockwork ores, and in auriferous quartz vein ores; (ii) microscopic native gold, 3 to 100 µm in diameter, that occurs as fine grains or as an interstitial phase in sulfides in the disseminated and stockwork ores, and in auriferous quartz vein ores; (iii) visible native gold, up to 1 cm in diameter, in the auriferous quartz vein ores; and (iv) electrum in the auriferous quartz vein ores. The gold mineralization of the disseminated and stockwork ores consists of four stages characterized by the mineral assemblages of: (i) pyrite‐I + arsenopyrite‐I; (ii) pyrite‐II + arsenopyrite‐II; (iii) sphalerite + galena + chalcopyrite + tetrahedrite + bournonite + boulangerite + alloclasite + native gold; and (iv) native gold. In the auriferous quartz vein ores, five mineralization stages are defined by the following mineral assemblages: (i) pyrite‐I; (ii) pyrite‐II + arsenopyrite; (iii) sphalerite + galena + chalcopyrite; (iv) Ag‐rich tetrahedrite‐tennantite + bournonite + geerite + native gold; and (v) electrum. The As–Au relations in pyrite‐II and arsenopyrite suggest that gold detected as invisible gold is mostly attributed to Au⁺¹ in those minerals. By applying the arsenopyrite geothermometer to arsenopyrite‐II in the disseminated and stockwork ores, crystallization temperature and logfs₂ are estimated to be 365 to 300 °C and –7.5 to –10.1, respectively.     

Surface carbonate and land-derived clastic marine sediments from southern Chile: mineralogical and geochemical investigation

Surface carbonate and land-derived deposits in the sea off southern Chile were investigated for their mineralogical and geochemical composition. The data were related to environmental features and compared with those of similar temperate and polar carbonate deposits from Tasmania, New Zealand, Arctica, and Antarctica. The mineralogy of the siliciclastic fraction is typical of cold areas and is mainly composed of chlorite, mica, quartz, feldspars and amphibole. The CaCO₃ content varies from 30 to 90%; carbonate mineralogy is made up of low-Mg calcite, high-Mg calcite and minor amounts of aragonite. The Ca, Mg, Sr, Fe, and Mn contents of bulk carbonates and some selected skeletal hard parts are comparable to those of carbonates from Tasmania. The elemental composition is mainly related to carbonate mineralogy, skeletal components, and seawater conditions. The δ¹³C and δ¹⁸O values of carbonates are positive, and their field falls between the “seafloor diagenesis” and “upwelling water” trend lines, because the sediments are likely to be in equilibrium with waters of Antarctic origin. The mineralogical, elemental, and isotopic compositions of carbonates from southern Chile show better similarities with the “temperate” carbonates from Tasmania and New Zealand than with the “polar” carbonates from Arctica and Antarctica. Carbonate deposition is allowed by the low terrigenous input, the low SPM concentration and, probably, the upwelling of seawater from Antarctica.     

辽南隈子金矿床石英脉含金性的红外光谱评价及找矿前景分析

石英是石英脉型金矿床中金矿物的主要载体矿物，其含金量与其包裹体中水和二氧化碳的相对光密度Ｄ１，Ｄ２密切相关，利用红外光谱法研究矿区已知含金石金石英脉石英的标型特征，确定矿区石英脉含金性评价准则，不仅能帮助分析含金石英脉的成矿远景，而且可判别石英脉是否含金，从而减少金品位化学分析的工作量，提高找金效果，是金矿普查勘探中行之有效的找金手段之一。     

陕西略阳张家山金矿成矿作用及Au-Se矿物形成物理化学条件研究

陕西略阳煎茶岭金矿矿集区中的张家山金矿主要由破碎蚀变岩型、角砾岩型和含金石英黄铁矿脉型矿石组成。含金石英-黄铁矿脉型矿石产于断层下盘的石英菱镁岩中。黄铁矿发育富As黄铁矿边,环边受As含量的变化呈现一定的韵律变化,自然金赋存在富As黄铁矿中。在断裂发育形成断层角砾岩的过程中,流体充填破碎石英菱镁岩的裂隙中形成热液矿物,包括硫化物、硒化物以及自然金。石英菱镁岩发生破碎形成的网状裂隙被含金石英-方解石-黄铁矿脉充填。破碎蚀变岩型矿石中,自然金主要分布在含金石英-黄铁矿脉的石英之中或靠近热液脉的菱镁矿或石英间隙。随着大量方解石脉沿裂隙贯入,进一步促进石英菱镁岩的破碎及岩石角砾的分离,形成由石英菱镁岩碎屑、石英和褐铁矿组成的复成分角砾岩,自然金和硒化物呈浸染状分布在角砾岩中。笔者在角砾岩型矿石中发现了灰硒汞矿、直硒镍矿、硒铅矿等硒化物,这些硒化物往往与自然金密切共生。结合矿物组合以及相关化学反应关系,通过热力学计算,构建了该矿床在不同温度条件下的热力学相平衡关系图,限定了硒化物与其他相关矿物稳定存在的物理化学条件。硒化物一般与自然金和石英共生,高的f(Se2)值和f(Se2)/f(S2)比值是控制硒化物形成的关键因素。     

Geochemical Features and Formation of the Auriferous Cherts in the Mojiang Gold Deposit,Yunnan

Auriferous cherts in the Middle Carboniferous Jinchang Formation are the dominant host rocks of auriferous quartz veins and mixed orebodies comprised of gold-bearing quartz veins and cherts in the Mojiang gold deposit.The rocks exhibit sedimentary texture and structure and are composed of hot-water deposited minerals.The FeO,Fe2O3,Au and Ag contents of the auriferous cherts are high;the Cr,Ni and Co contents are also high but significantly variable;MnO/TiO2 and TFe/TiO2 ratios are relatively higy.As viewed from a few diagrams that distinguish different chert formations,the auriferous cherts are in or near the range of hot-water deposited cherts.Because the correlation coefficients between Au contents and those of Cr, Ni of the rocks are negative,a great Au amount in the cherts might not be brought about by later hydrothermal alterations.The rare-earth elements,O and Si isotopic compositions of the auriferous cherts demonstrate that the cherts belong to hot-water deposited rocks.The later hydrothermal alterations made the petrochemical compositions of the cherts deviate from the characteristics of hot-water deposition.In general,the geological and geochemical features of the auriferous cherts demonstrate that the rocks were formed by hot water deposition.     

Volcanogenic-related origin of sulfide-rich quartz veins: evidence from O and S isotopes at the Géant Dormant gold mine, Abitibi belt, Canada

The Géant Dormant gold mine is a sulfide-rich quartz vein gold deposit hosted by a volcano-sedimentary sequence and an associated felsic endogenous dome and dikes. The auriferous quartz-sulfide veins were preceded by two synvolcanic gold-bearing mineralizing events: early sulfidic seafloor-related and later disseminated pyrite in the felsic dome. This deposit differs from classical Archean auriferous quartz vein deposits by the low carbonate and high sulfide contents of the veins and by their formation prior to ductile penetrative deformation. The δ¹⁸O values of quartz associated with seafloor-related auriferous sulfides average 11.9 ± 0.6‰ (n = 3). The seafloor hydrothermal fluids had a δ¹⁸O value of 3.2‰ calculated at 250 °C. The oxygen isotope composition of quartz and chlorite from veins average 12.5 ± 0.3‰ (n = 20) and 5.9 ± 1.1‰ (n = 4) respectively. Assuming oxygen isotope equilibrium between quartz and chlorite, the veins formed at a temperature of ∼275 °C, which is consistent with the calculated temperature of 269 ± 10 °C from chlorite chemistry. The gold-bearing fluids had a δ¹⁸O value of 4.7‰ calculated at 275 °C. The δ³⁴S values of sulfides from the three gold events range from 0.6 to 2.8‰ (n = 32) and are close to magmatic values. Sulfur isotope geothermometry constrains the sulfide precipitation in the gold-bearing veins at a temperature of ∼350 °C. The similarity of the isotope data, the calculated δ¹⁸O of the mineralizing fluids and the likely seawater fluid source suggest that the three mineralizing events are genetically related to a volcanogenic hydrothermal system. The high value of the auriferous fluids (δ¹⁸O = 4.7‰) is attributed to a significant magmatic fluid contribution to the evolved seawater-dominated convective hydrothermal system. The two-stage filling of veins at increasing temperature from quartz-chlorite (275 °C) to sulfides (350 °C) may reflect the progressive maturation of volcanogenic hydrothermal systems. These results, together with field and geochemical data, suggest that formation of gold-rich volcanogenic systems require specific conditions that comprise a magmatic fluid contribution and gold from arc-related felsic rocks, coeval with the mineralizing events. This study shows that some auriferous quartz-vein orebodies in Archean terranes are formed in volcanogenic rather than mesothermal systems. Received: 12 December 1998 / Accepted: 5 July 1999     

中国金矿床工业类型

作为勘查和开发直接对象的含金地质体是金矿床工业价值的决定性要素,是金矿床地质特征的本质规定,也是人们最易识别和掌握的直观标志,以此作为金矿床工业类型的分类基础,划分出10类金矿床:（1）石英脉型;（2）糜棱岩型;（3）蚀变碎裂岩型;（4）冰长石-绢云母石英脉型;（5）角砾岩型;（6）矽卡岩型;（7）微细浸染型;（8）红土型;（9）铁帽型;（10）砂砾层型     

Gold distribution in As-deficient pyrite and telluride mineralogy of the Yangzhaiyu gold deposit,Xiaoqinling district,southern North China craton

The Mesozoic Yangzhaiyu lode gold deposit is situated in the southern edge of the North China craton. Gold mineralization is hosted in Archean amphibolite facies metamorphic rocks, and consists mainly of auriferous quartz veins. Pyrite is the predominant sulfide mineral, with minor amounts of chalcopyrite, sphalerite, and galena. Based on morphology and paragenesis, there are three generations of pyrite, termed as first generation (G1), second generation (G2), and third generation (G3). They have distinct contents, occurrences, and distribution patterns of gold. The coarse-grained, euhedral G1 pyrite contains negligible to low levels of gold, whereas both invisible and visible gold are present in the fine- to medium-grained G2 pyrite that is characterized by abundance of microfractures and porosities, forming a foam-like texture. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) depth profiles indicate that invisible gold occurs either as solid solution or as nanoparticles of gold-bearing tellurides in the G2 pyrite. Visible gold is widespread and present as irregular grains and stringers of native gold mostly along grain boundaries or filling microfractures of pyrite, likely resulting from remobilization of invisible gold once locked in the G2 pyrite. The G3 pyrite, invariably intergrown with chalcopyrite, sphalerite, and galena, contains the highest levels of invisible gold. There is a positive correlation between Au, Ag, and Te, indicating that gold occurs as submicroscopic Au-bearing telluride inclusions in the host minerals. Whenever gold, either invisible or visible, is present, As is always below or only marginally higher than the detection limit of LA-ICP-MS. This indicates that As played an insignificant role in gold mineralization. Tellurides are widespread in the auriferous quartz veins, consisting mainly of petzite, calaverite, hessite, altaite, and tellurobismuthite. Native gold commonly occurs as intergrowths with tellurides. Textural evidence indicates a precipitation sequence, in a temporal order, of calcaverite, petzite, altaite, tellurobismuthite, and hessite. Little amount of sulfide phases has been found in association with the tellurides, indicating that tellurides were deposited under low S fugacity (fS ₂ ) and/or high Te fugacity (fTe ₂ ) conditions. The textural relationships, when combined with fluid inclusion microthermometric data of auriferous quartz veins and tellurides thermodynamic data, permit estimation for logfTe ₂ during telluride formation, which are −6.8 to −10.8 at 300°C and −9.6 to −17.6 at 250°C. Available geochronological and geochemical data suggest that Te was most likely derived from the late Mesozoic magmatic rocks widespread in the Xiaoqinling district and other parts of the southern North China craton, which were emplaced broadly contemporaneous with gold mineralization at Yangzhaiyu. This study highlights the role of Te and tellurides as important gold scavengers in As-deficient ore fluids.     

Oyster Predation by Black Drum Varies Spatially and Seasonally

Oyster reefs (Crassostrea virginica) supply important ecosystem services to estuarine habitats in the northern Gulf of Mexico, but little is known of the role of fish predators in controlling their structure or areal cover on soft sediments. At two sites and during fall and spring, we employed gill nets and trot lines to remove black drum (Pogonias cromis) from experimental reefs, and assessed oyster survival in comparison to control reefs. Numbers and biomass of black drum removed from reefs varied seasonally, among sites, and among removal methods. In the fall, black drum were rare at one site and abundant at the other, but did not significantly lower oyster survival on control reefs at either site. In the spring, black drum were common at both sites, and significantly lowered oyster survival on control reefs. Oysters and epizoic hooked mussels comprised roughly a third of the fishes’ diet, and oyster mortality was closely related to the percentage of drum feeding on oysters. There was little evidence of mortality from other predators of seed oysters like stone crabs or Southern oyster drills, and a repeated measures analysis of variance indicated black drum biomass was significantly depressed on experimental reefs during the experiments. Black drum thus appear to be potentially important predators on oyster reefs, but more work needs to be done on what factors explain the temporal and spatial variation in their abundance and oyster consumption.     

Calibration of the in situ cosmogenic 14C production rate in New Zealand's Southern Alps

In situ cosmogenic ¹⁴C (in situ ¹⁴C) analysis from quartz‐bearing rocks is a novel isotopic tool useful for quantifying recent surface exposure histories (up to ～25 ka). It is particularly powerful when combined with longer‐lived cosmogenic isotopes such as ¹⁰Be. Recent advances in the extraction of in situ ¹⁴C from quartz now permit the routine application of this method. However, only a few experiments to calibrate the production rate of in situ ¹⁴C in quartz have been published to date. Here, we present a new in situ ¹⁴C production rate estimate derived from a well‐dated debris flow deposit in the Southern Alps, New Zealand, previously used to calibrate ¹⁰Be production rates. For example, based on a geomagnetic implementation of the Lal/Stone scaling scheme we derive a spallogenic production rate of 11.4 ± 0.9 atoms ¹⁴C (g quartz)^?1 a^?1 and a ¹⁴C/¹⁰Be spallogenic production rate ratio of 3.0 ± 0.2. The results are comparable with production rates from previous calibrations in the northern hemisphere. Copyright © 2012 John Wiley & Sons, Ltd.     

Geology and Gold Mineralization in the Pan-African Rocks of the Adola Area, Southern Ethiopia

Primary and placer gold deposits are mined from the Pan-African Adola volcano-sedimentary sequence, in southern Ethiopia. Two major mineralized belts can be recognized: the Megado (‘Gold Belt’) and the Kenticha Belts. The Kenticha Belt is also known for its rare metal mineralization. Extensive exploration of the area resulted in two most important primary gold deposits of Lega Dembi and Sakaro. The primary gold deposits are classified into four classes based on their geological setting:

- auriferous veins, lodes, stockworks and silicified zones disseminated in schistose rocks

- gold associated with quartzite

- gold mineralization confined to conglomerates and meta-arkoses

- auriferous quartz veins in high grade gneiss rocks

This classification provides a useful guide for future exploration programme     

Age and tectonic setting of the first orogenic gold deposit discovered in the Yanbian Region,NE China

The Yangjingou gold deposit in Jilin Province lies 11 km south of the large-scale Xiaoxinancha gold–copper deposit. Yangjingou orebodies are structurally controlled fault- or fracture-related auriferous quartz veins. This type of mineralization is significantly different from that of the Xiaoxinancha porphyry gold–copper deposit, and has mineral assemblages and fluid inclusion compositions typical of orogenic gold deposits. We suggest that the Yangjingou deposit is the first orogenic gold deposit discovered in the Yanbian area, even in all of NE China. Here, we present new isotopic dating and trace element analysis of the ore-hosting monzogranite and auriferous quartz veins within the deposit, in order to determine the age and tectonic setting of metallogenesis, and the geological conditions controlling gold mineralization. LA-ICP-MS U–Pb dating of zircons separated from the monzogranite yielded an age of 262.3 ± 1.3 Ma, indicating intrusion during the late Permian. Hydrothermal muscovite from auriferous quartz veins yielded a ⁴⁰Ar/³⁹Ar plateau age of 241.57 ± 1.2 Ma, indicating that gold mineralization occurred at 241 Ma. Trace element and REE compositions of the monzogranite and auriferous quartz veins are both indicative of the formation from a region of the upper mantle that previously underwent crustal contamination. Geochronological analysis indicates that the diagenesis and mineralization resulting in the Yangjingou gold deposit occurred during the late Permian–Early Triassic. The tectonic evolution of the region and comparison of this deposit with other mineralizing events indicate that the orebody formed during orogenesis associated with collision between the North China and Siberian cratons.     

石湖金矿区中石英的找矿信息研究

石英与金矿床关系十分密切,石英中含有众多的信息.通过对它的研究,可提取出许多找金矿的信息或标志.石英热发光曲线反映金的矿化强度,矿体中的石英热发光曲线呈双蜂或多峰;而矿化带中则呈包含多种隐伏峰的单蜂曲线.与成矿有关的石英红外吸光度D_2、D_2/D_1可定性地评价其含金性.含金石英中的Al_2O_3、K_2O、Na_2O、H_3O~(+)的含量随着矿体埋藏深度的增大而增加,可用其判别矿体的埋藏深度.     

新疆吐拉苏盆地京希-伊尔曼德金矿地质和地球化学特征研究

京希-伊尔曼德金矿位于新疆北天山吐拉苏盆地的西北缘,赋存于泥盆纪-早石炭世火山-沉积地层底部的凝灰岩、凝灰质砂岩中,围岩经历了绢云母化、黄铁矿化、多期硅化和角砾化、碳酸盐化和重晶石化,金矿化与硅化围岩紧密伴生。矿体呈透镜状、层状和似层状,产状与围岩基本一致,主要由热液角砾岩型矿石组成,其热液演化期由四个阶段组成:I:硅化及绢云母化——在围岩凝灰岩和凝灰质砂岩中形成大量浸染状石英、绢云母和少量黄铁矿;II:角砾化及硅化——形成含金热液角砾岩a,角砾为早期蚀变围岩,胶结物为烟灰色玉髓状石英、黄铁矿、毒砂和少量金矿物;III:角砾化及硅化——形成含金热液角砾岩b,角砾为热液角砾岩a和蚀变围岩,胶结物为细粒石英、黄铁矿、毒砂和少量金矿物;IV:方解石-重晶石阶段——形成大量粗大的方解石-重晶石脉。京希-伊尔曼德金矿成矿流体本身富集V、Cr、Ni、Cu、Sb,且其中的Mn、Co、Zn、Bi以及大离子亲石元素LILE主要来自火山岩围岩。从成矿早期到晚期,成矿流体轻稀土元素逐渐富集、氧化性增强。水-岩体系氢、氧同位素组成模拟计算表明,京希-伊尔曼德金矿成矿流体主要为与区内火山岩再平衡的岩浆水,其中金浓度为1×10-6～2×10-6,形成该矿需要约1×108～0.5×108t岩浆热液,蚀变围岩和矿石中黄铁矿富集轻稀土元素。角砾化作用及其伴随的氧逸度升高是导致金沉淀的主要机制。     

Glacial forest refugium in Howard Valley,South Island,New Zealand

Fossils of forest habitat beetles and leaves of Nothofagus menziesii provide evidence of a forest refugium at times between ca. 34 000 and ca. 18 500 cal. a BP at an upland site in Howard Valley, located adjacent to glaciated valleys in South Island, New Zealand. The stratigraphy of the glacial‐aged terrace sequence of organic‐rich silts and fluvial sand/gravels indicates that soil development occurred episodically for around 15 000 a. Fifty‐four beetle taxa represent seven habitat types: forest, forest or scrub, riparian and aquatic, litter, grass/tussock, marshland and moss habitats. Leaf and beetle fossils indicate that forest dominated by N. menziesii persisted at the site for most of the time period represented, and tree line taxa such as Taenarthrus sp. 1 (Carabidae) and Podocarpus sp. (Podocarpaceae) indicate that the site may represent the upper tree limit for full‐glacial time. The finding of forest at this elevated site adds to the growing fossil evidence for multiple forest refugia in New Zealand during the last glaciation and is consistent with the pollen records, which have consistently indicated the presence of forest species during the last glaciations. Copyright © 2009 John Wiley & Sons, Ltd.     

Geogenic and anthropogenic zinc in epiphytic and terricolous lichens in Finland

At 31 sites in Finland the Zn content was determined of the epiphytic lichen Hypogymnia physodes (L.) Nyl. growing on pine and birch, the terricolous lichen Cladina spp. in pine bark, and the inner part of birch bark. The anomalous contents of Zn in H. physodes on pine and Cladina spp. in soil appeared to be strongly related to sulphide ore deposits. Anthropogenic Zn correlated closely with S and Fe in H. physodes on pine and with Fe in Cladina spp. The binding of geogenic Zn was related to iron hydroxides, and was attributed to the different uptake mechanism of S in these lichens. Elevated values of Zn in H. physodes on birch were due to both geogenic and anthropogenic sources. Zinc in pine bark increased with the Zn content in H. physodes and reached a limiting value.     

The molecular composition of ambers

Bulk (elemental composition, IR, CP/MAS ¹³C NMR) and molecular (GC-MS) analyses have been performed on a series of ambers and resins derived from different locations (Dominican Republic, Philippines, Canada, Israel, New Zealand, Chile) having diverse botanical affinities (Araucariaceae, Hymenaea) and variable age (from Holocene to Early Cretaceous). No major differences have been observed from the elemental composition and the spectroscopic data; however, the molecular analyses of the solvent extractable fraction show that a specific mixture of components is present in each sample. These are mainly diterpenoid products that in general are also found abundantly in the higher plants from which the ambers and resins originate. Nevertheless, a direct relationship between major terpenoid constituents in fossil resins and precursor plant materials can only be established for the younger samples.Irrespective of the geographical or botanical origin of the ambers and resins, several common age-dependent molecular transformation trends can be recognized: (1) progressive loss of olefinic bonds (especially those located in exocyclic positions), (2) decrease of functionalized products, and (3) increasing proportion of aromatized components. However, even in the samples of older age (Cretaceous) the degree of aromatization is very low when compared with that of other higher-plant related materials such as fossilized woods or low rank coals. This indicates that maturation must involve essentially olefin polymerization processes instead of extensive aromatization.