中国中东部MODIS与MISR气溶胶光学厚度的对比

Terra/MODIS前一版本C4和最新版本C5的气溶胶光学厚度(AOT Aerosol OpticalThickness)数据,以及搭载于同一卫星上的Terra/MISR气溶胶光学厚度数据,在中国中东部地区存在差异。本文利用AERONET气溶胶光学厚度数据对以上三种资料验证的结果表明:MODIS气溶胶算法改进之后得到的C5 AOT数据较C4精度确有很大提高,且优于MISR的AOT数据。     

Retrieval of the single scattering albedo of Asian dust mixed with pollutants using lidar observations

The vertical distribution of single scattering albedos （SSAs） of Asian dust mixed with pollutants was derived using the multi-wavelength Raman lidar observation system at Gwangju （35.10°N,126.53°E）.Vertical profiles of both backscatter and extinction coefficients for dust and non-dust aerosols were extracted from a mixed Asian dust plume using the depolarization ratio from lidar observations.Vertical profiles of backscatter and extinction coefficients of non-dust particles were input into an inversion algorithm to retrieve the SSAs of non-dust aerosols.Atmospheric aerosol layers at different heights had different light-absorbing characteristics.The SSAs of non-dust particles at each height varied with aerosol type,which was either urban/industrial pollutants from China transported over long distances at high altitude,or regional/local pollutants from the Korean peninsula.Taking advantage of independent profiles of SSAs of non-dust particles,vertical profiles of SSAs of Asian dust mixed with pollutants were estimated for the first time,with a new approach suggested in this study using an empirical determination of the SSA of pure dust.The SSAs of the Asian dust-pollutants mixture within the planetary boundary layer （PBL） were in the range 0.88-0.91,while the values above the PBL were in the range 0.76-0.87,with a very low mean value of 0.76 ± 0.05.The total mixed dust plume SSAs in each aerosol layer were integrated over height for comparison with results from the Aerosol Robotics Network （AERONET） measurements.Values of SSA retrieved from lidar observations of 0.92 ± 0.01 were in good agreement with the results from AERONET measurements.     

The role of lateral boundary conditions in simulations of mineral aerosols by a regional climate model of Southwest Asia

The importance of specifying realistic lateral boundary conditions in the regional modeling of mineral aerosols has not been examined previously. This study examines the impact of assigning values for mineral aerosol (dust) concentrations at the lateral boundaries of Regional Climate Model version 3 (RegCM3) and its aerosol model over Southwest Asia. Currently, the dust emission module of RegCM3 operates over the interior of the domain, allowing dust to be transported to the boundaries, but neglecting any dust emitted at these points or from outside the domain. To account for possible dust occurring at, or entering from the boundaries, mixing ratios of dust concentrations from a larger domain RegCM3 simulation are specified at the boundaries of a smaller domain over Southwest Asia. The lateral boundary conditions are monthly averaged concentration values (μg of dust per kg of dry air) resolved in the vertical for all four dust bin sizes within RegCM3’s aerosol model. RegCM3 simulations with the aerosol/dust model including lateral boundary conditions for dust are performed for a five year period and compared to model simulations without prescribed dust concentrations at the boundaries. Results indicate that specifying boundary conditions has a significant impact on dust loading across the entire domain over Southwest Asia. More specifically, a nearly 30% increase in aerosol optical depth occurs during the summer months from specifying realistic dust boundary conditions, bringing model results closer to observations such as MISR. In addition, smaller dust particles at the boundaries have a more important impact than large particles in affecting the dust loading within the interior of this domain. Moreover, increases in aerosol optical depth and dust concentrations within the interior domain are not entirely caused by inflow from the boundaries; results indicate that an increase in the gradient of concentration at the boundaries causes an increase of diffusion from the boundaries. Lastly, experiments performed using a climatology of dust concentrations yield similar results to those using actual monthly values. Therefore, using a climatology of dust mixing ratios is sufficient in implementing lateral boundary conditions for mineral aerosols. In short, this work concludes that realistic specification of lateral boundary conditions for mineral aerosols can be important in modeling the dust loading over arid regional climates such as Southwest Asia.     

Evaluating aerosol optical properties observed by ground-based and satellite remote sensing over the Mediterranean and the Middle East in 2006

This study evaluates the spatial and temporal variation of the aerosol optical depth (AOD), the particle size characteristics (Ångström coefficients) and single scattering albedos during selected episodes over the Mediterranean area in 2006, based on independent observational datasets. We compare the satellite data of MODIS and MISR with those of the ground-based AERONET and in situ measurements. In general the yearly mean MODIS and MISR AODs as well as their temporal variation are in good agreement with AERONET. The highest AODs are caused by mineral dust outbreaks and the accumulation of anthropogenic aerosols during stagnant meteorological conditions. The comparison of MODIS with MISR aerosol optical properties for June corroborates that the AODs, Ångström coefficients and single scattering albedos agree well, and indicates the presence of high dust loads over the Mediterranean. Later in summer, however, MISR AOD is generally lower than MODIS, which is consistent with previous studies that show that MISR tends to underestimate and MODIS tends to overestimate AOD over land when compared to AERONET observations. Comparing MODIS Aqua Deep Blue with MISR for June over the Saharan desert reveals some differences in the location and the maxima of the AODs. Over the eastern Mediterranean highest dust loads occur during spring and autumn. Biomass burning activities around the Black Sea during July and August cause high AODs (e.g. by agricultural waste burning), and the particulate pollution is transported to the eastern Mediterranean and the Middle East by the prevailing northerly Etesian winds.     

Daily and monthly averaged aerosol optical properties and diurnal variability deduced from AERONET sun-photometric measurements at Thala site (Tunisia)

Summary Spectral aerosol optical thickness have been measured at Thala site (central West of Tunisia) from March to October 2001. The measurement site is located in a continental and non industrialized region, approximately 150 km from the North coast of the Mediterranean Sea and nearby the Algerian border. Thala site could be then influenced by the dust content of the continental air masses carried by western and southern winds. A second pollution source is constituted by industrial and/or maritime particles carried by northern and eastern winds. AOT measurements acquired through the ground-based AERONET are analyzed. The diurnal cycle over Thala and two other areas within the network showed various trends and a prevailing pattern of the optical thickness increase by 10–40% during the day. Daily AOT and monthly averaged aerosol optical thickness, ?ngstr?m coefficient and precipitable water vapor are computed and compared with those of other sites. Measured meteorological parameters represent a valuable supplement to the data sets with the sunphotometer measurements. The analysis of the results shows that there is a high correlation between aerosol optical properties (AOT and ?ngstr?m coefficient) and the local weather conditions, essentially wind speed and direction and air specific humidity.     

Aerosol remote sensing over land: A comparison of satellite retrievals using different algorithms and instruments

An inter-comparison study of the aerosol optical thickness (AOT) at 0.55 μm retrieved using different satellite instruments and algorithms based on the analysis of backscattered solar light is presented for a single scene over central Europe on October 13th, 2005. For the first time comparisons have been performed for as many as six instruments on multiple satellite platforms. Ten different algorithms are briefly discussed and inter-compared. It was found that on the scale of a single pixel there can be large differences in AOT retrieved over land using different retrieval techniques and instruments. However, these differences are not as pronounced for the average AOT over land. For instance, the average AOT at 0.55 μm for the area 7–12E, 49–53N was equal to 0.14 for MISR, NASA MODIS and POLDER algorithms. It is smaller by 0.01 for the ESA MERIS aerosol product and larger by 0.04 for the MERIS BAER algorithm. AOT as derived using AATSR gives on average larger values as compared to all other instruments, while SCIAMACHY retrievals underestimate the aerosol loading. These discrepancies are explained by uncertainties in a priori assumptions used in the different algorithms and differences in the sensor characteristics. Validation against AERONET shows that MERIS provides the most accurate AOT retrievals for this scene.     

Episode Simulation of Asian Dust Storms with an Air Quality Modeling System

A dust deflation module was developed and coupled with the air quality modeling system RAMS-CMAQ to simultaneously treat all the major tropospheric aerosols（i.e.,organic and black carbons,sulfate,nitrate, ammonia,soil dust,and sea salt）.Then the coupled system was applied to East Asia to simulate Asian dust aerosol generation,transport and dry/wet removal processes during 14-25 March 2002 when two strong dust storms occurred consecutively.To evaluate model performance and to analyze the observed features of dust aerosols over the East Asian region,model results were compared to concentrations of suspended particulate matter of 10μm or less(PM₁₀;1-h intervals) at four remote Japanese stations and daily air pollution index （API） values for PM₁₀ at four large Chinese cities.The modeled values were generally in good agreement with observed data,and the model reasonably reproduced two dust storm outbreaks and generally predicted the dust onset and cessation times at each observation site.In addition,hourly averaged values of aerosol optical thickness（AOT） were calculated and compared with observations at four Aerosol Robotic Network （AERONET） stations to assess the model’s capability of estimating dust aerosol column burden.Analysis shows that modeled and observed AOT values were generally comparable and that the contribution of dust aerosols to AOT was significant only with regard to their source regions and their transport paths.     

Optical and physical characterization of ��Iraqi freedom�� dust storm, a case study

Kuwait was exposed to a severe dust storm on 19 March 2003, the eve of operation ??Iraqi Freedom??. Three days of dust events (19, 26, 27 March) were analyzed for their aerosol optical and physical properties using ground-based and satellite-retrieved measurements. Ground-based measurements of aerosol optical depth (or thickness; AOD or AOT) at 675?nm, ?? ₆₅₇, ?ngstrom coefficient ?? _936/657, particulate matter of diameter 10???m or less, PM₁₀ (??g/m³), and meteorological parameters were analyzed for March 2003. AOT exceeded 3 for the 3?days of interest and PM₁₀ concentrations reached as high value as 2,457???g/m³ on 19 March dust storm day. Retrieved aerosol characteristics from space using Moderate Resolution Imaging Spectrometer (MODIS) on board Terra and Aqua satellite were examined against ground-based measurements. A strong correlation was found between ground-based measurements of ?? ₆₇₅ and the Terra-MODIS retrieved AOD₅₅₀. The synoptic of the dust storm were analyzed and source regions were identified using back trajectory analysis and Total Ozone Mapping Spectrometer Aerosol Index.     

ACE‐2 multiple angle micro‐pulse lidar observations from Las Galletas, Tenerife, Canary Islands

Multiple‐angle micro‐pulse lidar (MPL) observations were made at Las Galletas on Tenerife, Canary Islands during the Aerosol Characterization Experiment‐2 (ACE‐2) conducted June–July, 1997. A principal objective of the MPL observations was to characterize the temporal/spatial distributions of aerosols in the region, particularly to identify and profile elevated Saharan dust layers which occur intermittently during the June–July time period. Vertical and slant angle measurements taken 16 and 17 July characterize such an occurrence, providing aerosol backscatter, extinction, and optical depth profiles of the dust layer between 1 and 5 km above mean sea level (MSL). Additionally, horizontal measurements taken in Las Galletas throughout the 6‐week period provide a time profile of the varying aerosol extinction at the surface. This profile exhibits the alternating periods of clean maritime air and pollution outbreaks that typified the region. Horizontal measurements also provide some evidence suggesting the possible influx of Saharan dust from the free troposphere to the surface. This paper presents estimates of aerosol optical properties retrieved from the multi‐angle MPL measurements in addition to an outline of the methodologies employed to obtain these results.     

Measurements of desert dust optical characteristics at Porte au Sahara during SAMUM

Main optical characteristics of desert dust, such as phase function and single scattering albedo, have been derived from combinations of sun-/sky-radiometer and satellite measurements during the SAMUM experiment (10 May–10 June 2006) at the site Porte au Sahara (30.237°N, 5.607°W) in South Morocco. Scattering phase functions have been retrieved using combined data of spectral aerosol optical thickness (AOT) and spectral sky brightness in the almucantar, considering non-spherical light scattering. Intercomparisons of modelled top-of-atmosphere (TOA) reflectance with satellite observations of the Medium Resolution Imaging Spectrometer (MERIS) and Scanning Imaging Absorption Spectrometer for Atmospheric Chartography () instrument have been used for the estimation of spectral single scattering albedo. For the radiative transfer calculations scattering phase functions and AOT from ground-based observations have been used. The spectral single scattering albedo ranges from 0.93 in the blue to 0.98 at 753 nm.     

The Seasonal Variations of Aerosols over East Asia as Jointly Inferred from MODIS and OMI

Data on aerosol optical thickness(AOT) and single scattering albedo(SSA) derived from Moderate Resolution Imaging Spectrometer(MODIS) and Ozone Monitoring Instrument(OMI) measurements,respectively,are used jointly to examine the seasonal variations of aerosols over East Asia.The seasonal signals of the total AOT are well defined and nearly similar over the land and over the ocean.These findings indicate a natural cycle of aerosols that originate primarily from natural emissions. In contrast,the small-sized aerosols represented by the fine-mode AOT,which are primarily generated over the land by human activities,do not have evident seasonalscale fluctuations.A persistent maximum of aerosol loadings centered over the Sichuan basin is associated with considerable amounts of fine-mode aerosols throughout the year.Most regions exhibit a general spring maximum. During the summer,however,the aerosol loadings are the most marked over north central China.This occurrence may result from anthropogenic fine particles,such as sulfate and nitrate.Four typical regions were selected to perform a covariation analysis of the monthly gridded AOT and SSA.Over southwestern and southeastern China,if the aerosol loadings are small to moderate they are composed primarily of the highly absorptive aerosols. However,more substantial aerosol loadings probably represent less-absorptive aerosols.The opposite covariation pattern occurring over the coastal-adjacent oceans suggests that the polluted oceanic atmosphere is closely correlated with the windward terrestrial aerosols.North central China is strongly affected by dust aerosols that show moderate absorption.This finding may explain the lower variability in the SSA that accompanies increasing aerosol loadings in this region.     

北京等7个气象台站太阳总辐射观测资料的准确度评估

基于地面太阳短波总辐射对气溶胶光学特性和地表反照率的敏感性, 该文提出了一个评估我国气象台站总辐射资料准确度的方法。该方法选用气溶胶光学厚度和太阳天顶角较小情形下的晴天辐射资料, 从太阳直射辐射反演气溶胶光学厚度, 用于计算宽带透过率, 再从该透过率和总辐射资料反演太阳常数E_{0, P}, 并采用E_{0, P}对世界辐射基准 (WRR) 的偏差表示总辐射资料的不确定性。模拟结果表明:气溶胶折射率虚部和大气柱水汽含量的输入误差是两个主要的评估不确定因子。用于准确度评估的资料越多, 越有利于平滑气溶胶、水汽含量等输入参数随机误差的效应, 评估结果越合理。应用这一方法, 该文评估了2000— 2004年我国沈阳、额济纳旗、北京、乌鲁木齐、格尔木、上海和广州7个气象台站总辐射资料的准确度。7个站共有1161个太阳常数反演值, 都满足太阳天顶角余弦 (μ₀) 大于0.7的条件。这些E_{0, P}值对WRR的最大偏差为7.33%, 97.78%的E_{0, P}值对WRR的偏差小于5%, 总平均E_{0, P}值对WRR偏差只有-1.15 %。依据这些结果, 当μ₀≥0.7时, 这些台站的晴天总辐射资料的不确定度估计为5%。     

Solar multi–spectral radiometric observations of atmospheric optical thickness over pasarlapudi gas well blow–out site in india

Multi-spectrai observations of solar radiation using a Volz sun-photometer have been carried out during February 24-March 2, 1995 in the vicinity of the blow-out of the gas well at Pasarlapudi, Andhra Pradesh, India. These unique and special observations have been utilized to study the aerosol, Rayleigh molecular and gaseous optical thicknesses. The re-sults of the analysis of the observations indicated, besides low gas concentrations well below their background values, sig-nificant variations in aerosol optical thickness (AOT) at visible and neat-infrared wavelength regions. The wavelength de-pendence of AOT revealed wide variations in the Junge aerosol size exponent from 0.98 to 6.70 indicating the presence of both sub-micron and coarse-mode aerosol particles over the observational site. A close correspondence between AOT and surface-level meteorological parameters during the period of observations was also noticed.     

Comparative inverse analysis of satellite (MODIS) and ground (PM10) observations to estimate dust emissions in East Asia

Soil dust aerosol is the largest contributor to aerosol mass concentrations in the troposphere and has considerable effects on air quality and climate. Arid and semi-arid areas of East Asia are one of the important dust source regions thus it is crucial to understand dust mobilization and accurately estimate dust emissions in East Asia. However, present dust models still contain large uncertainties with dust emissions that remain a significant contributor to the overall uncertainties in the model. In this study, we attempt to reduce these uncertainties by using an inverse modeling technique and obtain optimized dust emissions. We use Moderate Resolution Imaging Spectrometer (MODIS) aerosol optical depths (AODs) and groundbased mass concentrations of particles less than 10 μm in aerodynamic diameter (PM₁₀) observations over East Asia in May 2007. The MODIS AODs are validated with AErosol RObotic NETwork (AERONET) AODs. The inversion uses the maximum a posteriori method and the GEOS-Chem chemical transport model (CTM) as a forward model. The model error is large over dust source regions including the Gobi Desert and Mongolia. We find that inverse modeling analyses from the MODIS and PM₁₀ observations consistently result in decrease of dust emissions over Mongolia and the Gobi Desert. Whereas over the Taklamakan Desert and Manchuria, the inverse modeling analyses from both observations yield contrast results such as increase of dust sources using MODIS AODs, while decrease of those using PM₁₀ observations. We discuss some limitations of both observations to obtain the optimized dust emissions and suggest several strategies for the improvement of dust emission estimates in the model.     

Spatial distribution and optical properties of Saharan dust observed by airborne high spectral resolution lidar during SAMUM 2006

Airborne measurements of pure Saharan dust extinction and backscatter coefficients, the corresponding lidar ratio and the aerosol optical thickness (AOT) have been performed during the Saharan Mineral Dust Experiment 2006, with a high spectral resolution lidar. Dust layers were found to range from ground up to 4–6 km above sea level (asl). Maximum AOT values at 532 nm, encountered within these layers during the DLR Falcon research flights were 0.50–0.55. A significant horizontal variability of the AOT south of the High Atlas mountain range was observed even in cases of a well-mixed dust layer. High vertical variations of the dust lidar ratio of 38–50 sr were observed in cases of stratified dust layers. The variability of the lidar ratio was attributed to dust advection from different source regions. The aerosol depolarization ratio was about 30% at 532 nm during all measurements and showed only marginal vertical variations.     

An operational MODIS aerosol retrieval algorithm at high spatial resolution,and its application over a complex urban region

Aerosol retrieval algorithms for the MODerate Resolution Imaging Spectroradiometer (MODIS) have been developed to estimate aerosol and microphysical properties of the atmosphere, which help to address aerosol climatic issues at global scale. However, higher spatial resolution aerosol products for urban areas have not been well-researched mainly due to the difficulty of differentiating aerosols from bright surfaces in urban areas. Here, an aerosol retrieval algorithm using the MODIS 500-m resolution bands is described, to retrieve aerosol properties over Hong Kong and the Pearl River Delta region. The rationale of our technique is to first estimate the aerosol reflectances by decomposing the top-of-atmosphere reflectances from surface reflectances and Rayleigh path reflectances. For the determination of surface reflectances, a Minimum Reflectance Technique (MRT) is used, and MRT images are computed for different seasons. For conversion of aerosol reflectance to aerosol optical thickness (AOT), comprehensive Look Up Tables specific to the local region are constructed, which consider aerosol properties and sun-viewing geometry in the radiative transfer calculations. Four local aerosol types, namely coastal urban, polluted urban, dust, and heavy pollution, were derived using cluster analysis on 3 years of AERONET measurements in Hong Kong. The resulting 500 m AOT images were found to be highly correlated with ground measurements from the AERONET (r² = 0.767) and Microtops II sunphotometers (r² = 0.760) in Hong Kong. This study further demonstrates the application of the fine resolution AOT images for monitoring inter-urban and intra-urban aerosol distributions and the influence of trans-boundary flows. These applications include characterization of spatial patterns of AOT within the city, and detection of regional biomass burning sources.     

Ceilometer observations of aerosol layer structure above the Petit Lubéron during ESCOMPTE's IOP 2

A modified ceilometer has been used during the second Intensive Observation Period (IOP) of the “Expérience sur Site pour COntraindre les Modèles de Pollution atmosphériques et de Transport d'Émission” (ESCOMPTE) to perform continuous remote observations of aerosol accumulations in the first 3 km of the atmosphere. These observations encompassed an episode of intense particulate and photochemical pollution. The submicronic particles density, measured at an altitude of 600 m, went from a very low point of a few tens of particles per cubic centimeter (at the end of a Mistral episode in the free atmosphere) to a high point of more than 4500 particles per cubic centimeter (when pollutants were trapped by thermal inversions).The main result is that this instrument enables a fine documentation of the mixing layer height and of aerosol particles stratifications and circulation. Airborne aerosol measurements have been made above the mountainous region of Mérindol in order to validate in situ the remote sensing measurements. Ozone measurements near the summit of the mountains as well as in the valley were performed in order to correlate aerosol accumulation and ozone concentration. As a notable example, the two-layer aerosol stratification seen in the first 2 days of IOP 2b in that part of the ESCOMPTE domain confirms the results of another team which used backtrajectories. The low-altitude pollution for this timeframe had a local origin (the Fos industrial area), whereas above 500 m, the air masses had undergone regional-scale transport (from north-eastern Spain).The second major result is the highlighting of a pattern, in sea breeze conditions and in this part of the ESCOMPTE experiment zone, of nocturnal aerosol accumulation at an altitude of between 500 and 2000 m, followed by high ozone concentration the next day.     

Retrieval of aerosol optical properties over a vegetation surface using multi-angular,multi-spectral,and polarized data

An algorithm to retrieve aerosol optical properties using multi-angular,multi-spectral,and polarized data without a priori knowledge of the land surface was developed.In the algorithm,the surface polarized reflectance was estimated by eliminating the atmospheric scattering from measured polarized reflectance at 1640 nm.A lookup table （LUT） and an iterative method were adopted in the algorithm to retrieve the aerosol optical thickness （AOT,at 665 nm） and the （A）ngstr（o）m exponent （computed between the AOTs at 665 and 865 nm）.Experiments were performed in Tianjin to verify the algorithm.Data were provided by a newly developed airborne instrument,the Advanced Atmosphere Multi-angle Polarization Radiometer （AMPR）.The AMPR measurements over the target field agreed well with the nearby ground-based sun photometer.An algorithm based on Research Scanning Polarimeter （RSP） measurements was introduced to validate the observational measurements along a flight path over Tianjin.The retrievals were consistent between the two algorithms.The AMPR algorithm shows potential in retrieving aerosol optical properties over a vegetation surface.     

Optical Properties and Source Analysis of Aerosols over a Desert Area in Dunhuang,Northwest China

Aerosol observational data for 2012 obtained from Dunhuang Station of CARE-China(Campaign on Atmospheric Aerosol Research Network of China) were analyzed to achieve in-depth knowledge of aerosol optical properties over Dunhuang region. The results showed that the annual average aerosol optical depth(AOD) at 500 nm was 0.32 ± 0.06, and the ?ngstr?m exponent(α) was 0.73 ± 0.27. Aerosol optical properties revealed significant seasonal characteristics. Frequent sandstorms in MAM(March–April–May) resulted in the seasonal maximum AOD, 0.41 ± 0.04, and a relatively smaller αvalue, 0.44 ± 0.04. The tourism seasons, JJA(June–July–August) and SON(September–October–November) coincide with serious emissions of small anthropogenic aerosols. While in DJF(December–January–February), the composition of the atmosphere was a mixture of dust particles and polluted aerosols released by domestic heating; the average AOD and αwere 0.29 ± 0.02 and 0.66 ± 0.17, respectively. Different air masses exhibited different degrees of influence on the aerosol concentration over Dunhuang in different seasons. During MAM, ranges of AOD(0.11–1.18) and α(0.06–0.82) were the largest under the dust influence of northwest-short-distance air mass in the four trajectories. Urban aerosols transported by northwest-short-distance air mass accounted for a very large proportion in JJA and the mixed aerosols observed in SON were mainly conveyed by air masses from the west. In DJF, the similar ranges of AOD and α under the three air mass demonstrated the analogous diffusion effects on regional pollutants over Dunhuang.     

Seasonal characteristics of tropical marine boundary layer air measured at the Cape Verde Atmospheric Observatory

Observations of the tropical atmosphere are fundamental to the understanding of global changes in air quality, atmospheric oxidation capacity and climate, yet the tropics are under-populated with long-term measurements. The first three years (October 2006–September 2009) of meteorological, trace gas and particulate data from the global WMO/Global Atmospheric Watch (GAW) Cape Verde Atmospheric Observatory Humberto Duarte Fonseca (CVAO; 16° 51′ N, 24° 52′ W) are presented, along with a characterisation of the origin and pathways of air masses arriving at the station using the NAME dispersion model and simulations of dust deposition using the COSMO-MUSCAT dust model. The observations show a strong influence from Saharan dust in winter with a maximum in super-micron aerosol and particulate iron and aluminium. The dust model results match the magnitude and daily variations of dust events, but in the region of the CVAO underestimate the measured aerosol optical thickness (AOT) because of contributions from other aerosol. The NAME model also captured the dust events, giving confidence in its ability to correctly identify air mass origins and pathways in this region. Dissolution experiments on collected dust samples showed a strong correlation between soluble Fe and Al and measured solubilities were lower at high atmospheric dust concentrations. Fine mode aerosol at the CVAO contains a significant fraction of non-sea salt components including dicarboxylic acids, methanesulfonic acid and aliphatic amines, all believed to be of oceanic origin. A marine influence is also apparent in the year-round presence of iodine and bromine monoxide (IO and BrO), with IO suggested to be confined mainly to the surface few hundred metres but BrO well mixed in the boundary layer. Enhanced CO₂ and CH₄ and depleted oxygen concentrations are markers for air-sea exchange over the nearby northwest African coastal upwelling area. Long-range transport results in generally higher levels of O₃ and anthropogenic non-methane hydrocarbons (NMHC) in air originating from North America. Ozone/CO ratios were highest (up to 0.42) in relatively fresh European air masses. In air heavily influenced by Saharan dust the O₃/CO ratio was as low as 0.13, possibly indicating O₃ uptake to dust. Nitrogen oxides (NO_x and NO_y) show generally higher concentrations in winter when air mass origins are predominantly from Africa. High photochemical activity at the site is shown by maximum spring/summer concentrations of OH and HO₂ of 9?×?10⁶ molecule cm^?3 and 6?×?10⁸ molecule cm^?3, respectively. After the primary photolysis source, the most important controls on the HO_x budget in this region are IO and BrO chemistry, the abundance of HCHO, and uptake of HO_x to aerosol.