The subduction of the Paleo‐Pacific Plate to the Jiamusi Block: Evidence from the Early Mesozoic sedimentary rocks of the eastern Jiamusi Block

In order to provide references of the subduction process of the Paleo‐Pacific Plate beneath the Jiamusi Block, this paper studied the clastic rocks of the Nanshuangyashan Formation using modal analysis of sandstones, mudstone elements geochemistry, and detrital zircon U–Pb dating. These results suggest the maximum depositional age of the Nanshuangyashan Formation was between the Norian and Rhaetian (206.8 ±4.6 Ma, mean standard weighted deviation (MSWD) = 0.17). Whole‐rock geochemistry of mudstone indicates that source rocks of the Nanshuangyashan Formation were primarily felsic igneous rocks and quartzose sedimentary rocks, which were mainly derived from the stable continental block and a magmatic arc. Detrital zircon analysis showed the Nanshuangyashan Formation samples recorded four main age groups: 229–204 Ma, 284–254 Ma, 524–489 Ma and 930–885 Ma, and the provenances were attributed to the Jiamusi Block and a Late Triassic magmatic arc near the study area. Furthermore, the eastern Jiamusi Block was a backarc basin, affected by the subduction of the Paleo‐Pacific Plate in the Late Triassic, but the magmatic arc related to the subduction near the study area finally died out due to tectonic changes and stratigraphic erosion.     

Origin of the early Cenozoic belt boundary thrust and Izanagi–Pacific ridge subduction in the western Pacific margin

The belt boundary thrust within the Cretaceous–Neogene accretionary complex of the Shimanto Belt, southwestern Japan, extends for more than ~ 1 000 km along the Japanese islands. A common understanding of the origin of the thrust is that it is an out of sequence thrust as a result of continuous accretion since the late Cretaceous and there is a kinematic reason for its maintaining a critically tapered wedge. The timing of the accretion gap and thrusting, however, coincides with the collision of the Paleocene–early Eocene Izanagi–Pacific spreading ridges with the trench along the western Pacific margin, which has been recently re‐hypothesized as younger than the previous assumption with respect to the Kula‐Pacific ridge subduction during the late Cretaceous. The ridge subduction hypothesis provides a consistent explanation for the cessation of magmatic activity along the continental margin and the presence of an unconformity in the forearc basin. This is not only the case in southwestern Japan, but also along the more northern Asian margin in Hokkaido, Sakhalin, and Sikhote‐Alin. This Paleocene–early Eocene ridge subduction hypothesis is also consistent with recently acquired tomographic images beneath the Asian continent. The timing of the Izanagi–Pacific ridge subduction along the western Pacific margin allows for a revision of the classic hypothesis of a great reorganization of the Pacific Plate motion between ~ 47 Ma and 42 Ma, illustrated by the bend in the Hawaii–Emperor chain, because of the change in subduction torque balance and the Oligocene–Miocene back arc spreading after the ridge subduction in the western Pacific margin.     

Evolution processes of Ordovician–Devonian arc system in the South‐Kitakami Massif and its relevance to the Ordovician ophiolite pulse

The South Kitakami Massif is one of the oldest geological domains in Japan having Silurian strata with acidic pyroclastic rocks and Ordovician–Silurian granodiorite–tonalite basement, suggesting that it was matured enough to develop acidic volcanisms in the Silurian period. On the northern and western margin of the South Kitakami Massif, an Ordovician arc ophiolite (Hayachine–Miyamori Ophiolite) and high‐pressure and low‐temperature metamorphic rocks (Motai metamorphic rocks) exhumed sometime in the Ordovician–Devonian periods are distributed. Chronological, geological, and petrochemical studies on the Hayachine–Miyamori Ophiolite, Motai metamorphic rocks, and other early Paleozoic geological units of the South Kitakami Massif are reviewed for reconstruction of the South Kitakami arc system during Ordovician to Devonian times with supplementary new data. The reconstruction suggests a change in the convergence polarity from eastward‐ to westward‐dipping subduction sometime before the Late Devonian period. The Hayachine–Miyamori Ophiolite was developed above the eastward‐dipping subduction through three distinctive stages. Two separate stages of overriding plate extension inducing decompressional melting with minor involvement of slab‐derived fluid occurred before and after a stage of melting under strong influence of slab‐derived fluids. The first overriding plate extension took place in the back‐arc side forming a back‐arc basin. The second one took place immediately before the ophiolite exhumation and near the fore‐arc region. We postulate that the second decompressional melting was triggered by slab breakoff, which was preceded by slab rollback inducing trench‐parallel wedge mantle flow and non‐steady fluid and heat transport leaving exceptionally hydrous residual mantle. The formation history of the Hayachine–Miyamori Ophiolite implies that weaker plate coupling may provide preferential conditions for exhumation of very hydrous mantle. Very hydrous peridotites involved in arc magmatism have not yet been discovered except for in the Cambrian–Ordovician periods, suggesting its implications for global geodynamics, such as the thermal state and water circulation in the mantle.     

Geochemistry of volcanic glass from Oligocene detrital sediments at DSDP Site 296, Kyushu Palau Ridge: Interpreting the magmatic evolution of the early northern Izu–Bonin–Mariana Island Arc

Understanding the petrologic and geochemical evolution of island arcs is important for interpreting the timing and impacts of subduction and processes leading to the formation of a continental crust. The Izu–Bonin–Mariana (IBM) Arc, western Pacific, is an outstanding location to study arc evolution. The IBM first arc (45–25 Ma) followed a period of forearc basalt and boninite formation associated with subduction initiation (52–45 Ma). In this study, we present new major and trace element data for the IBM first arc from detrital glass shards and clasts from DSDP Site 296, located on the northernmost Kyushu Palau Ridge (KPR). We synthesize these data with published literature for contemporaneous airfall ash and tephra from the Izu–Bonin forearc, dredge and piston core samples from the KPR, and plutonic rocks from the rifted eastern KPR escarpment, locations which lie within or correlate with KPR Segment 1 of Ishizuka, Taylor, Yuasa, and Ohara (2011). Our objective is to test ways in which petrologic and chemical data for diverse igneous materials can be used to construct a complete picture of this section of the Oligocene first arc and to draw conclusions about its evolution. Important findings reveal that widely varying primary magmas formed and differentiated at various depths at this location during this period. Changes in key trace element ratios such as La/Sm, Nb/Yb, and Ba/Th show that mantle sources varied in fertility and in the inputs of subducted sediment and fluids over time and space. Plutonic rocks appear to be related to early K‐poor dacitic liquids represented by glasses sampled both in the forearc and volcanic fronts. An interesting observation is that the variation in magma compositions in this relatively small segment encompasses that inferred for the IBM Arc as a whole, suggesting that sampling is a key factor in inferring temporal, across‐arc, and along‐strike geochemical trends.     

From incipient island arc to doubly‐vergent orogen: A review of geodynamic models and sedimentary basin‐fills of southern Central America

Southern Central America is a Late Mesozoic/Cenozoic island arc that evolved in response to the subduction of the Farallón Plate beneath the Caribbean Plate in the Late Cretaceous and, from the Oligocene, the Cocos and Nazca Plates. Southern Central America is one of the best studied convergent margins in the world. The aim of this paper is to review the sedimentary and structural evolution of arc‐related sedimentary basins in southern Central America, and to show how the arc developed from a pre‐extensional intra‐oceanic island arc into a doubly‐vergent, subduction orogen. The Cenozoic sedimentary history of southern Central America is placed into the plate tectonic context of existing Caribbean Plate models. From regional basin analysis, the evolution of the southern Central American island arc is subdivided into three phases: (i) non‐extensional stage during the Campanian; (ii) extensional phase during the Maastrichtian‐Oligocene with rapid basin subsidence and deposition of arc‐related, clastic sediments; and (iii) doubly‐vergent, compressional arc phase along the 280 km long southern Costa Rican arc segment related to either oblique subduction of the Nazca plate, west‐to‐east passage of the Nazca–Cocos–Caribbean triple junction, or the subduction of rough oceanic crust of the Cocos Plate. The Pleistocene subduction of the Cocos Ridge contributed to the contraction but was not the primary driver. The architecture of the arc‐related sedimentary basin‐fills has been controlled by four factors: (i) subsidence caused by tectonic mechanisms, linked to the angle and morphology of the incoming plate, as shown by the fact that subduction of aseismic ridges and slab segments with rough crust were important drivers for subduction erosion, controlling the shape of forearc and trench‐slope basins, the lifespan of sedimentary basins, and the subsidence and uplift patterns; (ii) subsidence caused by slab rollback and resulting trench retreat; (iii) eustatic sea‐level changes; and (iv) sediment dispersal systems.     

Detrital heavy minerals from Lower Jurassic clastic rocks in the Joetsu area,central Japan: Paleo‐Mesozoic tectonics in the East Asian continental margin constrained by limited chloritoid occurrences in Japan

Detrital chloritoids were extracted from the Lower Jurassic sandstones in the Joetsu area of central Japan. The discovery of detrital chloritoids in the Joetsu area, in addition to two previous reports, confirms their limited occurrence in the Jurassic strata of the Japanese islands. This finding emphasizes the importance of the denudation of chloritoid‐yielding metamorphic belts in Jurassic provenance evolution, in addition to a change from an active volcanic arc to a dissected arc that has already been described. Possible sources for the detrital chloritoids from the Jurassic sandstones are the Permo–Triassic chloritoid‐yielding metamorphic rocks distributed in dispersed tectonic zones (Hida, Unazuki, Ryuhozan and Hitachi Metamorphic Rocks), which are in fault contact with Permian to Jurassic accretionary complexes in the Japanese islands. This is because all of these pre‐Jurassic chloritoid‐yielding metamorphic rocks have a Carboniferous–Permian depositional age and a Permo–Triassic metamorphic age, whereas a Permian–Triassic metamorphic age on the Hitachi Metamorphic Rocks remains unreported. In addition, most metamorphic chloritoids imply a former stable land surface that has evolved into an unstable orogenic area. Therefore, the chloritoid‐yielding metamorphic rocks might form a continuous metamorphic belt originating from a passive continental margin in East Asia. Evidence from paleontological and petrological studies indicates that the Permo–Triassic metamorphic belt relates to a collision between the Central Asian Orogenic Belt and the North China Craton. The evolution of the Permian–Jurassic provenance of Japanese detrital rocks indicates that the temporal changes in detritus should result from sequences of collision‐related uplifting processes.     

A new Lower Triassic (Induan) Jerus Limestone locality in northwest Pahang,Peninsular Malaysia: Conodont fauna,depositional and tectonic settings

Limestones exposed north of Raub, Pahang, Malaysia, and sandwiched between the Bentong‐Raub Suture Zone and the westernmost margin of the Sukhothai Arc terrane, yield a late Dienerian (late Induan) conodont fauna. The co‐occurrence of Neospathodus dieneri Sweet (morphotypes 1, 2 and 3) and Neospathodus pakistanensis Sweet represents the Neospathodus dieneri morphotype 3 sub‐zone of the Neospathodus dieneri Zone. The sampled limestones are interpreted as the northwards extension of the Jerus Limestone which crops out near Cheroh and Jerus villages, significantly extending the known outcrop of the Jerus Limestone northwards. The Jerus Limestone is interpreted as hemipelagic and formed in a foredeep or forearc setting on top of the accretionary complex formed by eastwards subduction of the Palaeo‐Tethys during the Lower to Middle Triassic.     

Cenozoic geodynamic evolution of the Andaman–Sumatra subduction margin: Current understanding

The Andaman–Sumatra margin displays a unique set‐up of extensional subduction–accretion complexes, which are the Java Trench, a tectonic (outer arc) prism, a sliver plate, a forearc, oceanic rises, inner‐arc volcanoes, and an extensional back‐arc with active spreading. Existing knowledge is reviewed in this paper, and some new data on the surface and subsurface signatures for operative geotectonics of this margin is analyzed. Subduction‐related deformation along the trench has been operating either continuously or intermittently since the Cretaceous. The oblique subduction has initiated strike–slip motion in the northern Sumatra–Andaman sector, and has formed a sliver plate between the subduction zone and a complex, right‐lateral fault system. The sliver fault, initiated in the Eocene, extended through the outer‐arc ridge offshore from Sumatra, and continued through the Andaman Sea connecting the Sagaing Fault in the north. Dominance of regional plate dynamics over simple subduction‐related accretionary processes led to the development and evolution of sedimentary basins of widely varied tectonic character along this margin. A number of north–south‐trending dismembered ophiolite slices of Cretaceous age, occurring at different structural levels with Eocene trench‐slope sediments, were uplifted and emplaced by a series of east‐dipping thrusts to shape the outer‐arc prism. North–south and east–west strike–slip faults controlled the subsidence, resulting in the development of a forearc basins and record Oligocene to Miocene–Pliocene sedimentation within mixed siliciclastic–carbonate systems. The opening of the Andaman Sea back‐arc occurred in two phases: an early (～11 Ma) stretching and rifting, followed by spreading since 4–5 Ma. The history of inner‐arc volcanic activity in the Andaman region extends to the early Miocene, and since the Miocene arc volcanism has been associated with an evolution from felsic to basaltic composition.     

Subduction and terrane collision stabilize the western Kaapvaal craton tectosphere 2.9 billion years ago

Integrative models of crust and mantle structure, age, and growth of the oldest continental nuclei—the Archean cratons—are critical to understanding the processes that stabilize continental lithosphere. For the Kaapvaal craton of southern Africa, conflicting ages of stabilization have been derived from studies of its crust and underlying mantle. New U-Pb zircon geochronological data from the western Kaapvaal craton reveal that two older (3.7 to 3.1 billion year old) continental masses, the Kimberley and Witwatersrand blocks, were juxtaposed by a significantly younger, previously unresolved episode of subduction and terrane collision between 2.93 and 2.88 billion years ago. Geological evidence indicates that convergence was accommodated by subduction beneath the Kimberley block, culminating in collisional suturing in the vicinity of the present-day Colesberg magnetic lineament. The timing of these convergent margin processes is further shown to correlate with the strong peak in Re-Os age distributions of Kimberley block mantle peridotites, eclogites, and eclogite-hosted diamonds. These data thus support the petrogenetic coupling of continental crust and lithospheric mantle through a model of continental arc magmatism, subduction zone mantle wedge processing and terminal collisional advective thickening to form Archean continental tectosphere.     

Petrogenesis and tectonomagmatic significance of volcanic and subvolcanic rocks in the Albanide–Hellenide ophiolitic mélanges

Abstract Ophiolitic mélanges associated with ophiolitic sequences are wide spread in the Mirdita–Subpelagonian zone (Albanide–Hellenide Orogenic Belt) and consist of tectonosedimentary ‘block‐in‐matrix‐type’ mélanges. Volcanic and subvolcanic basaltic rocks included in the main mélange units are studied in this paper with the aim of assessing their chemistry and petrogenesis, as well as their original tectonic setting of formation. Basaltic rocks incorporated in these mélanges include (i) Triassic transitional to alkaline within‐plate basalts (WPB); (ii) Triassic normal (N‐MORB) and enriched (E‐MORB) mid‐oceanic ridge basalts; (iii) Jurassic N‐MORB; (iv) Jurassic basalts with geochemical characteristics intermediate between MORB and island arc tholeiites (MORB/IAT); and (v) Jurassic boninitic rocks. These rocks record different igneous activities, which are related to the geodynamic and mantle evolution through time in the Mirdita–Subpelagonian sector of the Tethys. Mélange units formed mainly through sedimentary processes are characterized by the prevalence of materials derived from the supra‐subduction zone (SSZ) environments, whereas in mélange units where tectonic processes prevail, oceanic materials predominate. In contrast, no compositional distinction between structurally similar mélange units is observed, suggesting that they may be regarded as a unique mélange belt extending from the Hellenides to the Albanides, whose formation was largely dominated by the mechanisms of incorporation of the different materials. Most of the basaltic rocks surfacing in the MOR and SSZ Albanide–Hellenide ophiolites are incorporated in mélanges. However, basalts with island arc tholeiitic affinity, although they are volumetrically the most abundant ophiolitic rock types, have not been found in mélanges so far. This implies that the rocks forming the main part of the intraoceanic arc do not seem to have contributed to the mélange formation, whereas rocks presumably formed in the forearc region are largely represented in sedimentary‐dominated mélanges. In addition, Triassic E‐MORB, N‐MORB and WPB included in many mélanges are not presently found in the ophiolitic sequences. Nonetheless, they testify to the existence throughout the Albanide–Hellenide Belt of an oceanic basin since the Middle Triassic.     

Geochemistry of Devonian–Carboniferous clastic sediments of the Tsetserleg terrane,Hangay Basin,Central Mongolia: Provenance,source weathering,and tectonic setting

The Devonian–Carboniferous Tsetserleg terrane of Mongolia forms part of the complex Central Asian Orogenic Belt (CAOB). The Tsetserleg terrane consists mainly of clastic sediments, and is situated in the southern Hangay–Hentey Basin. Internally the terrane is divided into the Erdenetsogt (Middle Devonian), Tsetserleg (Middle‐Upper Devonian) and Jargalant (Lower Carboniferous) Formations. Provenance and tectonic setting of the Hangay–Hentey Basin remains controversial, with proposals ranging from passive margin through to island‐arc. A suite of 94 Tsetserleg sandstones and mudrocks was collected with the aim of constraining provenance, source weathering, and depositional setting, using established petrographic and whole‐rock geochemical parameters. Petrographically the sandstones are immature, with average compositions of Q₂₂F₁₄L₆₄, Q₁₄F₁₇L₆₉, and Q₁₈F₁₂L₇₀ in the Erdenetsogt, Tsetserleg, and Jargalant Formations, respectively. Lv/L ratios range from 0.81 to 1.00 (average 0.95), and P/F from 0.68 to 0.93 (average 0.83). Framework compositions indicate deposition in an undissected or transitional arc. Geochemically, the sandstones are classified as greywackes. Geochemical contrasts between sandstone and mudrock averages in each formation are small, with lithotype means for SiO₂ ranging only from 65.54 to 68.62 wt.%. These features and weak trends on variation diagrams reflect the immaturity of the sediments. Comparison of elemental abundances with average upper continental crust, major element discriminant scores, and immobile element ratios indicate a uniform average source composition between dacite and rhyolite. The maximum value for the Chemical Index of Alteration in the Erdenetsogt Formation is about 78 after correction for K‐metasomatism, indicating moderate source weathering. Lower maximum values (61 and 63, respectively) in the Tsetserleg and Jargalant Formations indicate they were derived from a virtually unweathered and tectonically active source. Tectonic setting discrimination parameters indicate a continental island‐arc environment, similar to several other CAOB suites of similar age. This arc source may have been built on a continental fragment situated within the Mongol–Okhotsk Ocean during Middle Devonian‐Lower Carboniferous time.     

Role of southeastern Sanandaj–Sirjan Zone in the tectonic evolution of Zagros Orogenic Belt,Iran

Geological studies indicate that the southeastern Sanandaj–Sirjan Zone, located in the southeastern Zagros Orogenic Belt, is subdivided transversally into the Esfahan–Sirjan Block with typical Central Iranian stratigraphic features and the Shahrekord–Dehsard Terrane consisting of Paleozoic and Lower Mesozoic metamorphic rocks. The Main Deep Fault (Abadeh Fault) is a major lithospheric fault separating the two parts. The purpose of this paper is to clarify the role of the southeastern Sanandaj–Sirjan Zone in the tectonic evolution of the southeastern Zagros Orogenic Belt on the basis of geological evidence. The new model implies that Neo‐Tethys 1 came into being when the Central Iran Microcontinent split from the northeastern margin of Gondwana during the Late Carboniferous to Early Permian. During the Late Triassic a new spreading ridge, Neo‐Tethys 2, was created to separate the Shahrekord–Dehsard Terrane from Afro–Arabian Plate. The Zagros sedimentary basin was formed on a continental passive margin, southwest of Neo‐Tethys 2. The two ophiolitic belts of Naien–Shahrebabak–Baft and Neyriz were developed to the northeast of Neo‐Tethys 1 and southwest of Neo‐Tethys 2 respectively, related to the sinking of the lithosphere of the Neo‐Tethys 1 in the Late Cretaceous. It can be concluded that deposition of the Paleocene conglomerate on the Central Iran Microcontinent and Pliocene conglomerate in the Zagros Sedimentary Basin is directly linked to the uplift generated by collision.     

40Ar/ 39Ar and K–Ar geochronological age constraints for the inception and early evolution of the Izu–Bonin – Mariana arc system

K–Ar and ⁴⁰Ar/³⁹Ar dates are presented for locations in the Izu–Bonin – Mariana (IBM) forearc (Ocean Drilling Program (ODP) sites 786 & 782, Chichijima, Deep Sea Drilling Program (DSDP) sites 458 & 459, Saipan), and Palau on the remnant arc of the Kyushu–Palau Ridge. For a number of these locations, the ⁴⁰Ar/³⁹Ar plateau and ³⁶Ar/⁴⁰Ar versus ³⁹Ar/⁴⁰Ar isochrons give older ages than the K–Ar results. The most important results are: (i) at site 786, initial construction of the proto-IBM (now forearc) basement occurred at least by ca 47–45 Ma, consistent with the age of the immediately overlying sediments (middle Eocene nannofossil Zone CP13c); the younger pulse of construction dated at ca 35 Ma by K–Ar could not be confirmed by ⁴⁰Ar/³⁹Ar analysis; (ii) ⁴⁰Ar/³⁹Ar ages for the initial construction of the Mariana portion of the IBM system are as old as those of the Izu–Bonin portion, for example at site 458, initial construction commenced at least by ca 49 Ma and at ca 47 Ma at Saipan (Sankakayuma Formation); and (iii) a combination of K–Ar and ⁴⁰Ar/³⁹Ar ages indicate continued boninite magmatism in the Izu–Bonin forearc (and remnant arc at Palau) until ca 35 Ma. Subduction inception including boninite series rocks along most of the exposed length of the IBM system, clearly preceded by some 5 million years the Middle Eocene (ca 43.5 Ma) change in Pacific plate motion. Boninitic series magmatism persisted at locations now exposed in the forearc for ～ 15 million years after arc inception concurrently with low-K tholeiitic series eruptions from a subaerial arc system, established at ≥ 40 Ma, on the Kyushu–Palau Ridge. For the Mariana portion of the IBM system, reconstruction of the proto-arc places this activity adjacent to the concurrent but orthogonally spreading Central Basin Ridge of the West Philippine Basin. It is possible that a combination of subduction of a young North New Guinea Plate beneath newly created back-arc basin crust may account for some of the features of the Mariana system. It is clear, however, that the understanding of the processes of subduction initiation and early IBM arc development is incomplete.     

华北克拉通北缘(怀来-苏尼特右旗)地壳结构

2009年,中国地质科学院地质研究所与美国俄克拉荷马大学合作实施了一条长453 km的深地震反射、宽角反射与折射、三分量反射地震联合探测剖面. 剖面南起怀来盆地,向北依次穿过燕山造山带西缘、内蒙地轴、白乃庙弧带、温都尔庙杂岩带,到达索伦缝合带. 其中,宽角反射与折射剖面采用8个0.5~1.5 t炸药震源激发,使用300套Texan单分量数字检波器接收,获得了高质量的地震资料. 通过资料分析和处理,识别出沉积层及结晶基底的折射波（Pg）、来自上地壳底界面的反射波（Pcp）,中地壳底界面的反射波（Plp）,莫霍界面的反射波（Pmp）及上地幔顶部的折射波（Pn）等5个震相. 分别采用Hole有限差分层析成像和Rayinvr算法对华北克拉通北缘及中亚造山带南部进行了上地壳P波速度结构成像和全地壳二维射线追踪反演成像. 结果显示：（1）中亚造山带地壳厚度~40 km,变化平缓,低于全球平均造山带地壳平均厚度,可能为造山后区域伸展的结果. 阴山-燕山带附近莫霍明显加深,推测其为燕山期造山过程形成的山根,但该山根很可能在后期被改造. （2）测线中部地壳上部速度较高,对应地表大面积花岗岩出露,而下地壳速度较低,速度梯度低,呈通道状,推测其可能曾为古亚洲洋向南俯冲消亡的主动陆缘,并在碰撞后演变为伸展环境下岩浆侵入的通道. （3）华北克拉通北缘与中亚造山带显示出不同速度变化特征,前者变化相对缓而后者则变化剧烈,二者的分界出现在赤峰-白云鄂博断裂附近.     

The tectonic boundary between the Okcheon and Taebaeksan basins,South Korea: A restraining bend of a continental transform fault between the South and North China Cratons

The geological relationship between the Okcheon and Taebaeksan basins of the Okcheon belt on the Korean peninsula is a key issue in reconstructing the tectonic evolution of the peninsula. The boundary between the two basin sequences has been variously interpreted as a conformable, unconformable, or thrust contact, without clear evidence being provided for any of these hypotheses. Detailed examination of structures and microfabrics of deformed rocks adjacent to the contact in the Bonghwajae area suggests that the boundary between the two basin sequences is a thrust. Based on the U–Pb ages of detrital zircons from metasedimentary rocks and pre‐existing geologic data from the Okcheon belt, the thrust is a relay structure between two segments of a continental transform fault along which the Okcheon Basin was juxtaposed against the Taebaeksan Basin during the Permian–Triassic suturing of the North and South China Cratons.     

Baguio Mineral District: An oceanic arc witness to the geological evolution of northern Luzon,Philippines

The Baguio Mineral District exposes rock formations that evince the geological and tectonic evolution of this district from a subduction‐related marginal basin to an island arc setting. Available onshore and offshore data are consistent with an Early (onset phase) to Middle (developed phase) Miocene arc polarity reversal from the east (termination of subduction along the proto‐East Luzon Trough) to the west (initiation of subduction along the Manila Trench). Geophysical modeling and geochemical data calculation showed a 30 ± 5 km crustal thickness for the mineral district. Subduction‐related multiple arc magmatism and ophiolite accretion contributed to crustal thickening. Recent information on the Oligo–Miocene Zigzag and Klondyke formations in the mineral district reveal that the marginal basin, where these rocks were deposited, has received eroded materials from adjacent terrains characterized by siliceous lithologies. Furthermore, adakitic rocks, high permeable zones and extensional zones which are exploration markers applied to identify possible mineralization targets, are prevalent in the mineral district. The geological evolution that the district had undergone mimics the evolution of island arcs worldwide in general and northern Luzon in particular.     

Radiolaria‐dated Lower Permian clastic‐rock sequence in the Fukuji area of the Hida‐gaien terrane,central Japan,and its inter‐terrane correlation across Southwest Japan

The stratigraphy and radiolarian age of the Mizuyagadani Formation in the Fukuji area of the Hida‐gaien terrane, central Japan, represent those of Lower Permian clastic‐rock sequences of the Paleozoic non‐accretionary‐wedge terranes of Southwest Japan that formed in island arc–forearc/back‐arc basin settings. The Mizuyagadani Formation consists of calcareous clastic rocks, felsic tuff, tuffaceous sandstone, tuffaceous mudstone, sandstone, mudstone, conglomerate, and lenticular limestone. Two distinctive radiolarian faunas that are newly reported from the Lower Member correspond to the zonal faunas of the Pseudoalbaillella u‐forma morphotype I assemblage zone to the Pseudoalbaillella lomentaria range zone (Asselian to Sakmarian) and the Albaillella sinuata range zone (Kungurian). In spite of a previous interpretation that the Mizuyagadani Formation is of late Middle Permian age, it consists of Asselian to Kungurian tuffaceous clastic strata in its lower part and is conformably overlain by the Middle Permian Sorayama Formation. An inter‐terrane correlation of the Mizuyagadani Formation with Lower Permian tuffaceous clastic strata in the Kurosegawa terrane and the Nagato tectonic zone of Southwest Japan indicates the presence of an extensive Early Permian magmatic arc(s) that involved almost all of the Paleozoic non‐accretionary‐wedge terranes in Japan. These new biostratigraphic data provide the key to understanding the original relationships among highly disrupted Paleozoic terranes in Japan and northeast Asia.     

Tectonic reconstruction of batholith formation based on the spatiotemporal distribution of Cretaceous–Paleogene granitic rocks in southwestern Japan

The spatiotemporal distribution of Cretaceous–Paleogene granitic rocks in southwestern Japan is investigated to understand the origin of the granitic batholith belt and to reconstruct the tectonic setting of emplacement. New U–Pb zircon ages for 92 samples collected from a region measuring 50 km (E–W) by 200 km (N–S) reveals a stepwise northward younging of granitic rocks aged between 95 and 30 Ma with an age‐data gap between 60 and 48 Ma. Based on the spatiotemporal distribution of granite ages, we examine two plausible models to explain the pattern of magmatic activity: (i) subduction of a segmented spreading ridge and subsequent slab melting (ridge‐subduction model), and (ii) subduction with a temporally variable subduction angle and corresponding spatial distribution of normal arc magmatism (subduction angle model). We optimize the model parameters to fit the observed magmatism in time and space, and compare the best‐fit models. As to ridge subduction model, the best‐fit solution indicates that the spreading ridge started to subduct at approximately 100 Ma, and involved a 45‐km‐wide section of the ridge segment, a subduction obliquity of 30°, and a slow migration velocity (～1.6 cm/y) of the ridge. These values are within the ranges of velocities observed for present‐day ridge subduction at the Chile trench. On the other hand, the best‐fit solution of subduction angle model indicates that the subduction angle decreases stepwise from 37° at 95 Ma, 32° at 87 Ma, 22° at 72 Ma, to 20° at 65 Ma, shifting magmatic region towards the continental side. These results and comparison, together with constraints on the geometry of the tectonic setting provided by previous studies, suggest that the ridge subduction model better explains the limited duration of magmatism, although both models broadly fit the data and cannot be ruled out.     

Subduction history of the Paleo-Pacific slab beneath Eurasian continent: Mesozoic-Paleogene magmatic records in Northeast Asia

This paper presents a review on the rock associations, geochemistry, and spatial distribution of Mesozoic-Paleogene igneous rocks in Northeast Asia. The record of magmatism is used to evaluate the spatial-temporal extent and influence of multiple tectonic regimes during the Mesozoic, as well as the onset and history of Paleo-Pacific slab subduction beneath Eurasian continent. Mesozoic-Paleogene magmatism at the continental margin of Northeast Asia can be subdivided into nine stages that took place in the Early-Middle Triassic, Late Triassic, Early Jurassic, Middle Jurassic, Late Jurassic, early Early Cretaceous, late Early Cretaceous, Late Cretaceous, and Paleogene, respectively. The Triassic magmatism is mainly composed of adakitic rocks, bimodal rocks, alkaline igneous rocks, and A-type granites and rhyolites that formed in syn-collisional to post-collisional extensional settings related to the final closure of the Paleo-Asian Ocean. However, Triassic calc-alkaline igneous rocks in the Erguna-Xing’an massifs were associated with the southward subduction of the Mongol-Okhotsk oceanic slab. A passive continental margin setting existed in Northeast Asia during the Triassic. Early Jurassic calc-alkaline igneous rocks have a geochemical affinity to arc-like magmatism, whereas coeval intracontinental magmatism is composed of bimodal igneous rocks and A-type granites. Spatial variations in the potassium contents of Early Jurassic igneous rocks from the continental margin to intracontinental region, together with the presence of an Early Jurassic accretionary complex, reveal that the onset of the Paleo- Pacific slab subduction beneath Eurasian continent occurred in the Early Jurassic. Middle Jurassic to early Early Cretaceous magmatism did not take place at the continental margin of Northeast Asia. This observation, combined with the occurrence of low-altitude biological assemblages and the age population of detrital zircons in an Early Cretaceous accretionary complex, indicates that a strike-slip tectonic regime existed between the continental margin and Paleo-Pacific slab during the Middle Jurassic to early Early Cretaceous. The widespread occurrence of late Early Cretaceous calc-alkaline igneous rocks, I-type granites, and adakitic rocks suggests low-angle subduction of the Paleo-Pacific slab beneath Eurasian continent at this time. The eastward narrowing of the distribution of igneous rocks from the Late Cretaceous to Paleogene, and the change from an intracontinental to continental margin setting, suggest the eastward movement of Eurasian continent and rollback of the Paleo- Pacific slab at this time.     

Tethyan ophiolites and Pangea break-up

Abstract The break‐up of Pangea began during the Triassic and was preceded by a generalized Permo‐Triassic formation of continental rifts along the future margins between Africa and Europe, between Africa and North America, and between North and South America. During the Middle–Late Triassic, an ocean basin cutting the eastern equatorial portion of the Pangea opened as a prograding branch of the Paleotethys or as a new ocean (the Eastern Tethys); westwards, continental rift basins developed. The Western Tethys and Central Atlantic began to open only during the Middle Jurassic. The timing of the break‐up can be hypothesized from data from the oceanic remnants of the peri‐Mediterranean and peri‐Caribbean regions (the Mesozoic ophiolites) and from the Atlantic ocean crust. In the Eastern Tethys, Middle–Late Triassic mid‐oceanic ridge basalt (MORB) ophiolites, Middle–Upper Jurassic MORB, island arc tholeiite (IAT) supra‐subduction ophiolites and Middle–Upper Jurassic metamorphic soles occur, suggesting that the ocean drifting was active from the Triassic to the Middle Jurassic. The compressive phases, as early as during the Middle Jurassic, were when the drifting was still active and caused the ocean closure at the Jurassic–Cretaceous boundary and, successively, the formation of the orogenic belts. The present scattering of the ophiolites is a consequence of the orogenesis: once the tectonic disturbances are removed, the Eastern Tethys ophiolites constitute a single alignment. In the Western Tethys only Middle–Upper Jurassic MORB ophiolites are present – this was the drifting time. The closure began during the Late Cretaceous and was completed during the Eocene. Along the area linking the Western Tethys to the Central Atlantic, the break‐up was realized through left lateral wrench movements. In the Central Atlantic – the link between the Western Tethys and the Caribbean Tethys – the drifting began at the same time and is still continuing. The Caribbean Tethys opened probably during the Late Jurassic–Early Cretaceous. The general picture rising from the previous data suggest a Pangea break‐up rejuvenating from east to west, from the Middle–Late Triassic to the Late Jurassic–Early Cretaceous.