U–Pb zircon geochronology of the Daraban leucogranite,Mawat ophiolite,Northeastern Iraq: A record of the subduction to collision history for the Arabia–Eurasia plates

The Mawat ophiolite is part of the Mesozoic Neo‐Tethyan ophiolite belt of the Middle East and is located in the Zagros Imbricate Zone of Iraq. It represents fossil fragments of the Neo‐Tethyan oceanic lithosphere within the Alpine collisional system between the Arabian and Eurasia Plates. The first U–Pb zircon dating of the Daraban leucogranite from the Mawat ophiolite provides a ²⁰⁷Pb–²⁰⁶Pb age of 96.8 ± 6.0 Ma. The age is 59.0 ± 6.0 m.y. older than the previously published age of the Daraban leucogranite obtained by ⁴⁰Ar–³⁹Ar muscovite dating method. The U–Pb dating of magmatic zircons collected from the Daraban leucogranite, which intrudes into the Mawat ophiolite, reveals that melting of the pelagic sediment beneath the hot Zagros proto‐ophiolite in an intra‐oceanic arc environment led to anatexis at the subduction front and the generation of granitic melts at 96.8 ± 6.0 Ma, which were emplaced in the overlaying mantle wedge. This process was a response to the initial formation of the Neo‐Tethys ophiolite above a northeast‐dipping intra‐oceanic subduction zone at 96.8 ± 6.0 Ma. Published ⁴⁰Ar–³⁹Ar muscovite dating from the same leucogranite dike yields plateau ages of 37.7 ± 0.3 Ma, reflecting that the age was reset during the Arabia–Eurasia continental collision. Therefore, the bimodal age populations from the granitic intrusion in the Mawat ophiolite preserve a record of the subduction to the collision cycle of the Zagros Orogenic Belt. The 59.0 ± 6.0 m.y. age difference from the Daraban leucogranite represents the duration of the subduction‐collision cycle of the Zagros Orogenic Belt in the Kurdistan region of Iraq and the time span for the closure of the Neo‐Tethys Ocean along the northern margin of the Arabian plate.     

Late Carboniferous – Middle Permian arc/forearc‐related basin in Central Asian Orogenic Belt: Insights from the petrology and geochemistry of the Shuangjing Schist in Inner Mongolia,China

The Solonker Suture Zone is thought to record the terminal evolution of the Central Asian Orogenic Belt (CAOB) in Inner Mongolia. However, two contrasting interpretations of the timing of suturing of the Solonker Suture Zone exist: (i) Permian to Early Triassic; and (ii) Middle Devonian or Late Devonian to Carboniferous. The Shuangjing Schist is exposed in the Linxi area along the Xar Moron Fault Zone, which marks the southern boundary of the Solonker Suture Zone in the eastern section of the CAOB, and thus provides insight into the timing of suturing of the Solonker Suture Zone. Detailed and systematic analysis of the petrology and geochemistry of the Shuangjing Schist shows that the Shuangjing Schist developed by greenschist facies prograde metamorphism of a volcanisedimentary rock series protolith. The volcanic parts of the Shuangjing Schist are a calc‐alkaline series with large volumes of intermediate members and subordinate acidic members. Volcanism occurred in a magmatic arc on the continental margin and was induced by subduction‐related magmatism resulting from mantle metasomatism. The sedimentary parts of the Shuangjing Schist reflect a transition from continental shelf to abyssal plain sedimentation. The formation of the Shuangjing Schist is suggested to be related to closure of an arc/forearc‐related ocean basin. The timing is constrained by a laser ablation inductively coupled plasma–mass spectrometry (LA‐ICP–MS) U–Pb magmatic zircon age of 298 ± 2 Ma from a carbonaceous biotite–plagioclase schist that was intruded by granite at 272 ± 2 Ma. In the Linxi area, southward subduction of the arc/forearc basin led to uplift, thickening, collapse, and erosion of the overriding continental crust. Collapse induced extension and widespread magmatism along the volcanic arc at the northern margin of the North China Craton. The closure of the arc/forearc‐related oceanic basin led to the formation of Late Permian to Middle Triassic collisional granites and the subsequent end of the collision of the Solonker Suture Zone.     

Tectonic implications of the geochemical data from the Makran igneous rocks in Iran

Makran is one of the largest accretionary prisms on Earth, formed by the closure of the Neotethys ocean which is now represented by its remnant, the Gulf of Oman. Tectonic evolution of the Makran island‐arc system is explored within the context of a north dipping subduction zone, with temporal variations in slab dip arrangement. In a Middle Jurassic–Early Paleocene steep slab dip arrangement, the Mesozoic magmatic arc and the Proto‐Jaz Murian depression, which was an intra‐arc extensional basin, were developed. This was associated with development of outer‐arc ophiolitic mélange and oceanward migration of the Bajgan–Durkan continental sliver, which is the continuation of the Sanandaj–Sirjan zone of the Zagros orogenic belt into the Makran region. In a Late Paleocene to Late Pliocene moderate to shallow slab dip arrangement, compression and tectonic inversion of the Proto‐Jaz Murian extensional basin into the Jaz Murian compressive basin was associated with the uplift of the southern part of the Jaz Murian Depression along the South Jaz Murian Fault, and emplacement of the Paleogene–Neogene magmatic arc, behind the Jaz Murian compressive basin. A shallow slab dip arrangement in the Quaternary led to the emplacement of a third magmatic arc inland, over the southern part of the Yazd–Tabas–Lut micro‐continental block. It is envisioned that the Makran island‐arc system will pass through similar tectonic events in the future, as the Zagros island‐arc system did in the past. However, a future remnant and/or residual basin similar to the present Gulf of Oman will continue to survive to the east.     

Crustal thickness variations in the Zagros continental collision zone (Iran) from joint inversion of receiver functions and surface wave dispersion

Variations in crustal thickness in the Zagros determined by joint inversion of P wave receiver functions (RFs) and Rayleigh wave group and phase velocity dispersion. The time domain iterative deconvolution procedure was employed to compute RFs from teleseismic recordings at seven broadband stations of INSN network. Rayleigh wave phase velocity dispersion curves were estimated employing two-station method. Fundamental mode Rayleigh wave group velocities for each station is taken from a regional scale surface wave tomographic imaging. The main variations in crustal thickness that we observe are between stations located in the Zagros fold and thrust belt with those located in the Sanandaj–Sirjan zone (SSZ) and Urumieh–Dokhtar magmatic assemblage (UDMA). Our results indicate that the average crustal thickness beneath the Zagros Mountain Range varies from ～46 km in Western and Central Zagros beneath SHGR and GHIR up to ～50 km beneath BNDS located in easternmost of the Zagros. Toward NE, we observe an increase in Moho depth where it reaches ～58 km beneath SNGE located in the SSZ. Average crustal thickness also varies beneath the UDMA from ～50 km in western parts below ASAO to ～58 in central parts below NASN. The observed variation along the SSZ and UDMA may be associated to ongoing slab steepening or break off in the NW Zagros, comparing under thrusting of the Arabian plate beneath Central Zagros. The results show that in Central Iran, the crustal thickness decrease again to ～47 km below KRBR. There is not a significant crustal thickness difference along the Zagros fold and thrust belt. We found the same crystalline crust of ～34 km thick beneath the different parts of the Zagros fold and thrust belt. The similarity of crustal structure suggests that the crust of the Zagros fold and thrust belt was uniform before subsidence and deposition of the sediments. Our results confirm that the shortening of the western and eastern parts of the Zagros basement is small and has only started recently.     

Mineral chemistry and geothermobarometry of Moshirabad pluton,Qorveh, Kurdistan,western Iran

The Moshirabad pluton is located southwest of the Sanandaj–Sirjan Metamorphic Belt, Qorveh, western Iran. The pluton is composed of diorite, monzodiorite, quartz diorite, quartz monzodiorite, tonalite, granodiorite, granite, aplite, and pegmatite. In this study 31 samples from various rocks were chosen for whole‐rock analyses and 15 samples from different lithologies were chosen for mineral chemical studies. The compositions of minerals are used to describe the nature of magma and estimate the pressure and temperature at which the Moshirabad pluton was emplaced. Feldspar compositions are near the binary systems in which plagioclase compositions range from An₅ to An₅₃ and alkali‐feldspar compositions range from Or₉₁ to Or₉₇. Mafic minerals in the plutonic rocks are biotite and hornblende. Based on the composition of biotites and whole‐rock chemistry, the Moshirabad pluton formed from a calc‐alkaline magma. Amphiboles are calcic amphiboles (magnesio‐hornblende or edenite). Temperatures of crystallization, calculated with the hornblende–plagioclase thermometer, range 550–750°C. These temperatures indicate that plutonic rocks have undergone some retrogressive changes in their mineral compositions. Aluminum‐in‐hornblende geobarometry indicates that the Moshirabad pluton was emplaced at pressures of 2.3–6.0 kbar, equal to depths of 7–20 km, but with consideration of regional geology, lower pressures than the above pressure range are more probable. Alteration of amphiboles can be the reason for some overestimation of pressures.     

Hf–Nd isotope constraints on the origin of Dehshir Ophiolite,Central Iran

The peri‐Arabian ophiolite belt, from Cyprus in the west, eastward through Northwest Syria, Southeast Turkey, Northeast Iraq, Southwest Iran, and into Oman, marks a 3000 km‐long convergent margin that formed during a Late Cretaceous (ca 100 Ma) episode of subduction initiation on the north side of Neotethys. The Zagros ophiolites of Iran are part of this belt and are divided into Outer (OB) and Inner (IB) Ophiolitic Belts. We here report the first Nd–Hf isotopic study of this ophiolite belt, focusing on the Dehshir ophiolite (a part of IB). Our results confirm the Indian mid‐oceanic ridge basalt (MORB) mantle domain origin for the Dehshir mafic and felsic igneous rocks. All lavas have similar Hf isotopic compositions, but felsic dikes have significantly less‐radiogenic Nd isotopic compositions compared to mafic lavas. Elevated Th/Nb and Th/Yb in felsic samples accompany nonradiogenic Nd, suggesting the involvement of sediments or continental crust.     

Sedimentary fill history of the Huicheng Basin in the West Qinling Mountains and associated constraints on Mesozoic intracontinental tectonic evolution

The Qinling Orogenic Belt is divided commonly by the Fengxian-Taibai strike-slip shear zone and the Huicheng Basin into the East and West Qinling mountains,which show significant geological differences after the Indosinian orogeny.The Fengxian-Taibai fault zone and the Meso-Cenozoic Huicheng Basin,situated at the boundary of the East and West Qinling,provide a natural laboratory for tectonic analysis and sedimentological study of intracontinental tectonic evolution of the Qinling Orogenic Belt.In order to explain the dynamic development of the Huicheng Basin and elucidate its post-orogenic tectonic evolution at the junction of the East and West Qinling,we studied the geometry and kinematics of fault zones between the blocks of West Qinling,as well as the sedimentary fill history of the Huicheng Basin.First,we found that after the collisional orogeny in the Late Triassic,post-orogenic extensional collapse occurred in the Early and Middle Jurassic within the Qinling Orogenic Belt,resulting in a series of rift basins.Second,in the Late Jurassic and Early Cretaceous,a NE-SW compressive stress field caused large-scale sinistral strike-slip faults in the Qinling Orogenic Belt,causing intracontinental escape tectonics at the junction of the East and West Qinling,including eastward finite escape of the East Qinling micro-plate and southwest lateral escape of the Bikou Terrane.Meanwhile,the strike-slip-related Early Cretaceous sedimentary basin was formed with a right-order echelon arrangement in sinistral shear zones along the southern margin of the Huicheng fault.Overall during the Mesozoic,the Huicheng Basin and surrounding areas experienced four tectonic evolutionary stages,including extensional rift basin development in the Early and Middle Jurassic,intense compressive uplift in the Late Jurassic,formation of a strike-slip extensional basin in the Early Cretaceous,and compressive uplift in the Late Cretaceous.     

New SHRIMP U–Pb zircon ages of granitic rocks in the Hida Belt,Japan: Implications for tectonic correlation with Jiamushi massif

Granitoids in the Hida region of Japan encompass two main rock types: younger type‐1 granites and older type‐2 granites. Sensitive high mass‐resolution ion microprobe (SHRIMP) U–Pb zircon dating of older type‐2 granites collected from the Tateyama area show similar ages of 245 ± 2 Ma and 248 ± 5 Ma for two gneissose granites, while a significantly younger intrusion age of 197 ± 3 Ma was determined for the younger type‐1 granites collected from the Hayatsukigawa River which belongs to the Okumayama pluton. A felsic gneiss sample (07HI‐3) collected from the right bank of the Hayatsukigawa River yielded multiple complex ages at 330 ± 6 Ma, indicating the timing of the Hida regional tectono‐thermal events that formed the Hida gneisses; 243 ± 8 Ma, representing the timing of intrusion of the augen granite; and 220 Ma, indicating the timing of regional dextral ductile shearing that caused a repeated recrystallization of metamorphic rocks in the study area. Considering the geochronological data, the rock types and assemblages, basement, and Sr–Nd isotopic constraints, we propose that the Hida Belt separated from the Jiamushi massif, which is located in the eastern margin of the Central Asian Orogenic Belt.     

The Heilongjiang Group: A Jurassic accretionary complex in the Jiamusi Massif at the western Pacific margin of northeastern China

Abstract The tectonic setting of the Eastern Asian continental margin in the Jurassic is highly controversial. In the current study, we have selected the Heilongjiang complex located at the western margin of the Jiamusi Massif in northeastern China for geochronological investigation to address this issue. Field and petrographic investigations indicate that the Heilongjiang complex is composed predominately of granitic gneiss, marble, mafic‐ultramafic rocks, blueschist, greenschist, quartzite, muscovite‐albite schist and two‐mica schist that were tectonically interleaved, indicating they represent a mélange. The marble, two‐mica schist and granitic gneiss were most probably derived from the Mashan complex, a high‐grade gneiss complex in the Jiamusi Massif with which the Heilongjiang Group is intimately associated. The ultramafic rocks, blueschist, greenschist and quartzite (chert) are similar to components in ophiolite. The sensitive high mass‐resolution ion microprobe U‐Pb zircon age of 265 ± 4 Ma for the granitic gneiss indicates that the protolith granite was emplaced coevally with Permian batholiths in the Jiamusi Massif. ⁴⁰Ar/³⁹Ar dating of biotite and phengite from the granitic gneiss and mica schist yields a late Early Jurassic metamorphic age between 184 and 174 Ma. Early components of the Jiamusi Massif, including the Mashan complex, probably formed part of an exotic block from Gondwana, affected by late Pan‐African orogenesis, and collided with the Asian continental margin during the Early Jurassic. Subduction of oceanic crust between the Jiamusi block and the eastern part of the Central Asian Orogenic Belt resulted in the formation of a huge volume of Jurassic granites in the Zhangguangcai Range. Consequently, the collision of the Jiamusi Massif with the Central Asian Orogenic Belt to the west can be considered as the result of circum‐Pacific accretion, unrelated to the Central Asian Orogenic Belt. The widespread development of Jurassic accretionary complexes along the Asian continental margin supports such an interpretation.     

Late Cretaceous uplift history of the Cretaceous volcanic arc in Southwest Japan: Provenance analysis of the Yuasa–Aridagawa basin based on U–Pb zircon ages

The Ryoke Metamorphic complex has undergone low‐P/T metamorphism and was intruded by granitic magmas around 100 Ma. Subsequently, the belt was uplifted and exposed by the time deposition of the Izumi Group began. The tectonic history of uplift, such as the timing and processes, are poorly known despite being important for understanding the spatiotemporal evolution of the Ryoke Metamorphic Belt. U–Pb zircon ages from sedimentary rocks in the forearc and backarc basins are useful for constraining uplift and magmatism in the provenance. U–Pb dating of detrital zircons from 12 samples (four sandstones and eight granitic clasts) in the Yuasa–Aridagawa basin, a Cretaceous forearc basin in the Chichibu Belt of Southwest Japan, gave mostly ages of 60–110 Ma. Granitic clasts contained in conglomerate suggest that granitic intrusions predate the formation of Coniacian and Maastrichtian conglomerate. Emplacement ages of granitic bodies originated from granitic clasts in Coniacian conglomerate are (110.2 ±1.3) Ma, (106.1 ±1.8) Ma, (101.8+5.8–3.8) Ma, and (95.3 ±1.4) Ma; for granitic clasts in Maastrichtian conglomerate, (89.6 ±1.8) Ma, (87.3+2.4–1.8) Ma, (85.7 ±1.2) Ma, and (82.7 ±1.2) Ma. The results suggest that detrital zircons in the sandstones were mainly derived from volcanic eruptions contemporaneous with depositional age, and plutonic rocks of the Ryoke Metamorphic Belt. Zircon ages of the granitic clast samples also indicate that uplift in the provenance began after Albian and occurred at least during the Coniacian to Maastrichtian. Our results, together with the difference of provenance between backarc and forearc basins suggest that the southern marginal zone of the Ryoke Metamorphic Belt was uplifted and supplied a large amount of clastic materials to the forearc basins during the Late Cretaceous.     

Petrogensis and tectonic setting of the Yemaquan granite from the iron‐polymetallic ore area of Qimantag,Eastern Kunlun Mountains,Qinghai–Tibet Plateau

Being a part of the Paleo‐Tethys Ocean, closing of the Buqingshan‐Anyemaqen oceanic basin left a rich geologic record in the East Kunlun Orogenic Belt. The genesis and tectonic setting of the granites including quartz monzodiorite, granodiorite and mozogranite is discussed in light of the geochemical and U–Pb chronological data obtained. U–Pb dating studies on zircon from the quartz monzodiorite and monzogranite of the research area yielded ages of 220.11 ± 0.49 Ma ((Mean Square Weighted Deviates) MSWD = 0.046) and 223.33 ± 0.54 Ma (MSWD = 0.14), respectively, by Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA–MC–ICP–MS) method. According to sedimentological and structural investigations, the Paleo‐Tethys Ocean in the Qimantag region began to close at about 235 Ma, and completely disapperared at about 220 Ma. The three types of granites in this study are considered to intrude the syn‐ to post‐collisional stages. The quartz monzodiorite and granodiorite belong to the I‐type granite whereas the monzogranite is of the S‐type granite. These two types of granites were formed by different ways of partial melting: first, partial melting of the lower crust took place as a result of asthenosphere upwelling triggered by break‐up of the leading edge or tearing of the descending oceanic slab. Subsequently partial melting of the middle–lower crust was caused by the underplating of basaltic magma formed by partial melting of the mantle wedge fluxed by fluids liberated by the oceanic slab dehydration. The magma responsible for the formation of S‐type granites appears to have originated from partial melting of the upper crustal material at a shallower level with a clear signature of continental crust.     

Diverse protolith ages for the Mindoro and Romblon Metamorphics (Philippines): Evidence from single zircon U–Pb dating

Within the north‐eastern part of the Palawan Continental Terrane, which forms the south‐western part of the Philippine archipelago, several metamorphic complexes are exposed that are considered to be rifted parts of the Asian margin in South‐East China. The protolith age(s) and correlations of these complexes are contentious. The largest metamorphic complex of the Palawan Continental Terrane comprises the Mindoro Metamorphics. The north‐eastern part of this metamorphic complex has recently been found to be composed of protoliths of Late Carboniferous to Late Permian protolith age. However, meta‐sediments exposed at the westernmost tip and close to the southern boundary of the exposure of the Mindoro Metamorphics contain detrital zircons and with U–Pb ages, determined by LA–ICP–MS, in the range 22–56 Ma. In addition, zircons as young as 112 Ma were found in a sample of the Romblon Metamorphics in Tablas. As the youngest detrital zircons provide an upper age limit for the time of deposition in meta‐sediments, these results suggest that the Mindoro and Romblon Metamorphics comprise protoliths of variable age: Late Carboniferous to Late Permian in NE Mindoro; Eocene or later in NW Mindoro; Miocene at the southern margin of the Mindoro metamorphics; and Cretaceous or later on Tablas. The presence of non‐metamorphic sediments of Late Eocene to Early Oligocene age in Mindoro (Lasala Formation), which are older than the youngest metasediments, suggests that metamorphism of the young meta‐sediments of Mindoro is the result of the collision of the Palawan Continental terrane with the Philippine Mobile Belt in Late Miocene. Similarities of the age spectra of zircons from the Eocene to Miocene metamorphics with the Eocene to Early Miocene Lasala Formation suggest that the protoliths of the young metamorphics may be equivalents of the Lasala Formation or were recycled from the Lasala Formation.     

Tethyan ophiolites and Pangea break-up

Abstract The break‐up of Pangea began during the Triassic and was preceded by a generalized Permo‐Triassic formation of continental rifts along the future margins between Africa and Europe, between Africa and North America, and between North and South America. During the Middle–Late Triassic, an ocean basin cutting the eastern equatorial portion of the Pangea opened as a prograding branch of the Paleotethys or as a new ocean (the Eastern Tethys); westwards, continental rift basins developed. The Western Tethys and Central Atlantic began to open only during the Middle Jurassic. The timing of the break‐up can be hypothesized from data from the oceanic remnants of the peri‐Mediterranean and peri‐Caribbean regions (the Mesozoic ophiolites) and from the Atlantic ocean crust. In the Eastern Tethys, Middle–Late Triassic mid‐oceanic ridge basalt (MORB) ophiolites, Middle–Upper Jurassic MORB, island arc tholeiite (IAT) supra‐subduction ophiolites and Middle–Upper Jurassic metamorphic soles occur, suggesting that the ocean drifting was active from the Triassic to the Middle Jurassic. The compressive phases, as early as during the Middle Jurassic, were when the drifting was still active and caused the ocean closure at the Jurassic–Cretaceous boundary and, successively, the formation of the orogenic belts. The present scattering of the ophiolites is a consequence of the orogenesis: once the tectonic disturbances are removed, the Eastern Tethys ophiolites constitute a single alignment. In the Western Tethys only Middle–Upper Jurassic MORB ophiolites are present – this was the drifting time. The closure began during the Late Cretaceous and was completed during the Eocene. Along the area linking the Western Tethys to the Central Atlantic, the break‐up was realized through left lateral wrench movements. In the Central Atlantic – the link between the Western Tethys and the Caribbean Tethys – the drifting began at the same time and is still continuing. The Caribbean Tethys opened probably during the Late Jurassic–Early Cretaceous. The general picture rising from the previous data suggest a Pangea break‐up rejuvenating from east to west, from the Middle–Late Triassic to the Late Jurassic–Early Cretaceous.     

The North Nuratau Fault Zone,Uzbekistan—Structure and evolution of a Palaeozoic Suture Zone

The Nuratau Fault Zone in eastern Uzbekistan forms part of the western prolongation of the Tien Shan, an extensive orogenic zone located along the margin of the Central Asian Orogenic Belt. The Nuratau region is geologically complex, forming part of the suture zone between the Kazakh-Kyrgyz continent and the Alai microcontinent. A model is proposed suggesting modified N-directed subduction model, where an extensive fold-and-thrust belt developed in the Nuratau region. This, coupled with significant transform activity would have resulted in major segmentation of the existing stratigraphy in the region, as well as the development of a foredeep basin to the north of the fold-and-thrust belt. Regional suturing and collision was variable. Indeed, the collisional history probably involved multi-phase subduction/accretion of various microcontinents, ancient island arcs, and fragments of oceanic islands. Final collision would have produced an eroding basinal high in the region of the Nuratau mountains, which issued sediment both northwards into the remnant basin of the Turkestan Ocean, but also to the south into the newly forming Amu Darya Basin.     

U–Pb dating of detrital zircon from Permian successions of the South Kitakami Belt,Northeast Japan: Clues to the paleogeography of the belt

The South Kitakami Belt in the northeast Japan is unique in presence of a thick Paleozoic–Mesozoic sedimentary rocks. The Permian sedimentary succession in the Maiya area of this belt is divided into the Nishikori, Tenjinnoki, and Toyoma formations, in ascending stratigraphic order. The Tenjinnoki Formation includes the Yamazaki Conglomerate Member containing granitic clasts. We performed U–Pb dating for detrital zircon of one sample of tuffaceous sandstone from the Nishikori Formation, six samples of sandstone from the Tenjinnoki and Toyoma formations, and five granitic clasts from the Yamazaki Conglomerate using laser ablation-inductively coupled plasma-mass spectrometry. Our dating results show that the tuffaceous sandstone sample has two age peaks at 287 and 301 Ma for the Nishikori Formation, three age peaks at 320–300, 290, and 270 Ma for the Tenjinnoki and Toyoma Formation, and ages of 311, 300, and 270 Ma from granitic clasts of the Yamazaki Conglomerate. In addition, older ages of 452–435 and 380 Ma were obtained from some zircon grains of the sandstone and granitic clasts. Our results suggest igneous activity in these periods. The South Kitakami Belt's origin with respect to continental blocks has been discussed in regard of the margin of North China Block or South China Block. Based on the stratigraphic ages and timing of igneous activity, we conclude that during the Permian the South Kitakami Belt was located at the margin of the South Central Asian Orogenic Belt, near the Solonker-Xra Moron-Changchun suture and the North China Block in East Asia.     

Paleogeographic reconstructions of the East Asia continental margin during the middle to late Mesozoic

The currently available paleogeographic maps of the East Asia continental margin during the Mesozoic have been recast in the light of recent research results on sediments distributed in Korea and Japan. Both the Korean peninsula and the Inner zone of Southwest Japan exchanged sediment supply during the Middle to Late Mesozoic, suggestive of a close paleogeographic relationship between the two countries at the active continental margin setting. During the latest Middle to earliest Late Jurassic the Mino–Tamba trench was developed along the southeastern Korean peninsula, from which trench‐fill sediments were sourced and to which an accretionary complex was accreted. Lower Cretaceous quartz‐arenite clasts of the Tetori Group in the Hida Marginal Belt of Southwest Japan were derived from pre‐Mesozoic quartz‐arenite strata distributed in the southern central and east central Korean peninsula, suggesting that the Tetori Basin was located close to the central eastern part of the Korean peninsula at the time of deposition of quartz‐arenite clasts, contrary to conventional thought of far distance between the two areas based on paleomagnetic data. During the early Late Cretaceous radiolaria‐bearing chert pebbles and sands in the northern part of the non‐marine Gyeongsang Basin distributed in the southeastern Korean peninsula were derived from the uplifted Mino–Tamba accretionary complex distributed in southwest Japan, suggesting that the Mino–Tamba terrane was land‐connected with the eastern Korean peninsula. These new findings suggest that in contrast to conventional thought, the collage of tectonic blocks in Southwest Japan has assembled in post‐early Late Cretaceous time.     

U–Pb zircon geochronology of the Hida gneiss and granites in the Kamioka area,Hida Belt

A new U–Pb dating and oxygen isotope analysis of zircons collected from a granitic mylonite and an undeformed granite in the Kamioka area, in the Hida Belt of southwest Japan, was conducted using a sensitive high‐resolution ion microprobe (SHRIMP) to restrict the timing of the mylonitization in the Funatsu Shear Zone, which is situated on the eastern and southeastern margins of the Hida Belt. Here, undeformed granite intrudes into the granitic mylonite deformed by mylonitization in the Funatsu Shear Zone. The granitic mylonite and the undeformed granite yielded U–Pb zircon ages of 242.6 ±1.9 Ma and 199.1 ±1.9 Ma, respectively. The granitic mylonite and the undeformed granite also yielded zircon oxygen isotope ratios (δ¹⁸O_VSMOW) of 7.74 ±0.37 ‰ and 5.74 ±0.17 ‰, which suggests that these rocks are derived from different magmas. Therefore, the timing of the mylonitization in the Funatsu Shear Zone is constrained to be at least 242.6–199.1 Ma, which is consistent with other data from the Tateyama area. The U–Pb zircon ages of the banded gneiss in the Kamioka area also reveals that the protolith is a sedimentary rock deposited at approximately 256 Ma, and regional metamorphism occurred at 245.0 ±6.6 Ma, which indicates that the mylonitization in the Funatsu Shear Zone occurred after the metamorphism in the Hida Belt. These geochronological and geochemical data give new insight into the relationship between the Hida Belt and the eastern margin of the Asian continent: the geochronological and geochemical data in this study support the possibility that the Funatsu Shear Zone is comparable with the Cheongsan Shear Zone located at the center of the Ogcheon Belt on the Korean Peninsula.     

Denudation history of the Kiso Range,central Japan,and its tectonic implications: Constraints from low‐temperature thermochronology

Fission‐track (FT) and (U–Th–Sm)/He (He) analyses are used to constrain the denudation pattern and history of the Kiso Range, a Japanese fault‐block mountain range which has been uplifted since ca 0.8 Ma. We obtained nine zircon FT ages ranging 59.3–42.1 Ma, 18 apatite FT ages ranging 81.9–2.3 Ma, and 13 apatite He ages ranging 36.7–2.2 Ma. The apatite FT and He ages are divided into an older group comparable to the zircon FT age range and a younger group of <18 Ma. The younger ages are interpreted as a reflection of uplift of the Kiso Range because they were obtained only to the east of the Seinaiji‐touge Fault, and the event age estimated from apatite FT data is consistent with the timing of the onset of the Kiso Range uplift. On the basis of the distribution of the younger ages, we propose westward tilting uplift of the Kiso Range between the boundary fault of the Inadani Fault Zone and Seinaiji‐touge Fault, which implies a model of bedrock uplift that is intermediate between two existing models: a pop‐up model in which the Kiso Range is squeezed upward between the two faults and a tilted uplift model which assumes that the Kiso Range is uplifted and tilted to the west by the Inadani Fault Zone. The original land surface before the onset of uplift/denudation of the Kiso Range is estimated to have been uplifted to an elevation of 2700–4900 m. We estimated denudation rates at 1.3–4.0 mm/y and maximum bedrock uplift rates at 3.4–6.1 mm/y since ca 0.8 Ma. The Seinaiji‐touge fault is interpreted as a back thrust of the west‐dipping Inadani Fault Zone. The older group of apatite FT and He ages is interpreted to reflect long‐term peneplanation with a probable denudation rate of <0.1 mm/y.     

Multivariate statistical analysis of deformation tensors: independent vs. correlated tensor observations

In the presence of errors in measuring a random displacement field (under the normal distribution assumption of displacement field), stochastic behaviors of principal components of deformation tensors (strain tensor and tensor of change of curvature (TCC)), based on the intrinsic assumption of geometrical modeling of surface deformation analysis, are discussed. We divided the contents into two parts: In the first, we considered independent random vectors of repeated tensor measurements. In the second step, we considered correlations among repeated measurements. Then, covariance components between tensor elements by Helmert estimator, based on prior information of variance components, are estimated. As a case study, both assumptions are applied to the estimation of principal components of deformation rate tensor observations in Zagros region (Western Iran). The results of numerical analysis showed that greatest shortening is accommodated in oblique orientation (NS) with respect to the Main Recent Fault (MRF), northwest part of North Zagros, Central Iran block and MRF, respectively. Most of the extensions occurred in the east part of the belt. The pattern of eigenspace components of TCC shows highest positive values across the NW region, nearly in orthogonal direction to the MRF and Main Zagros Fault (MZF). The pattern has insignificant values in the Central Zagros. It takes the significant negative values across the SW part, especially along the SPF and Persian Gulf shore. The effect of non-independent observations on the estimation of eigenspace components of deformation tensors (strain tensor and TCC) shows that the estimation of covariance components has influence on the confidence intervals of eigenspace components, especially in seismically active regions of the belt (along the Persian Gulf shore, NW of the belt and region between the Central Iran block and MRF). The results demonstrate the importance of considering the correlation structure among the observations on statistical behavior of principal components of deformation tensors in seismically active regions.     

U–Pb zircon ages of the Nakanogawa Group in the Hidaka Belt,northern Japan: Implications for its provenance and the protolith of the Hidaka metamorphic rocks

Zircon U–Pb ages of two acidic tuff and two turbidite sandstone samples from the Nakanogawa Group, Hidaka Belt, were measured to estimate its depositional age and the development of the Hokkaido Central Belt, northeast Japan. In the northern unit, homogeneous zircons from pelagic acidic tuff from a basal horizon dated to 58–57 Ma, zircons from sandstone from the upper part of the unit dated to 56–54 Ma, and zircons from acidic tuff from the uppermost part dated to 60–56 Ma and 69–63 Ma. Both of the tuff U–Pb ages are significantly older than the youngest radiolarian fossil age (66–48 Ma). Therefore, the maximum depositional age of the turbidite facies in the northern unit is 58 Ma and the younger age limit, estimated from the fossil age, is 48 Ma. In the southern unit, homogeneous zircons from turbidite sandstone dated to 58–57 Ma. Thus the depositional age of this turbidite facies was interpreted to be 66–56 Ma from the fossil age, probably close to 57 Ma. Most of the zircon U–Pb ages from the Nakanogawa Group are younger than 80 Ma, with a major peak at 60 Ma. This result implies that around Hokkaido volcanic activity occurred mainly after 80 Ma. Older zircon ages (120–80 Ma, 180–140 Ma, 340–220 Ma, 1.9 Ga, 2.2 Ga, and 2.7 Ga) give information about the provenance of other rocks in the Hidaka Belt. It is inferred that the Nakanogawa Group comprises protoliths of the upper sequence of the Hidaka Metamorphic Zone, which therefore has the same depositional age as the Nakanogawa Group (66–48 Ma). The depositional ages of the lower sequence of the Hidaka Metamorphic Zone and the Nakanogawa Group are probably the same.