Assessment of flood hazard,vulnerability and risk of mid-eastern Dhaka using DEM and 1D hydrodynamic model

Floods are regular feature in rapidly urbanizing Dhaka, the capital city of Bangladesh. It is observed that about 60% of the eastern Dhaka regularly goes under water every year in monsoon due to lack of flood protection. Experience gathered from past devastating floods shows that, besides structural approach, non-structural approach such as flood hazard map and risk map is effective tools for reducing flood damages. In this paper, assessment of flood hazard by developing a flood hazard map for mid-eastern Dhaka (37.16 km²) was carried out by 1D hydrodynamic simulation on the basis of digital elevation model (DEM) data from Shuttle Radar Topography Mission and the hydrologic field-observed data for 32 years (1972–2004). As the topography of the area has been considerably changed due to rapid land-filling by land developers which was observed in recent satellite image (DigitalGlobe image; Date of imagery: 7th March 2007), the acquired DEM data were modified to represent the current topography. The inundation simulation was conducted using hydrodynamic program HEC-RAS for flood of 100-year return period. The simulation has revealed that the maximum depth is 7.55 m at the southeastern part of that area and affected area is more than 50%. A flood hazard map was prepared according to the simulation result using the software ArcGIS. Finally, to assess the flood risk of that area, a risk map was prepared where risk was defined as the product of hazard (i.e., depth of inundation) and vulnerability (i.e., the exposure of people or assets to flood). These two maps should be helpful in raising awareness of inhabitants and in assigning priority for land development and for emergency preparedness including aid and relief operations in high-risk areas in the future.     

山区小流域洪水分布模式模拟与危险性评估

流域暴雨山洪过程时空异质性强,准确评估雨洪变化特性和洪水危险性对山洪灾害防治具有重要意义。以7个降雨特征指标和6个洪水特征指标刻画流域场次雨洪特性,采用中国山洪水文模型和洪水频率指标相结合,模拟和评估口前流域洪水过程及其危险性。结果表明：场次洪水洪峰模数、洪峰时间偏度、高脉冲历时占比、涨落洪速率与降雨总量、平均雨量、最大雨强、雨峰位置系数、基尼系数等降雨特征指标显著相关,三场致灾洪水过程的降雨均呈现量级大、强度大、历时短、暴雨中心偏中下游的特点;率定期和验证期的平均径流深相对误差均在9%以内,平均洪峰流量相对误差均在11%以内,平均峰现时间误差均在1.7 h以内,平均Nash-Sutcliffe系数为0.80和0.76;各场次洪水有0.0%～93.3%的河段流量达到一般危险及以上等级,三场致灾洪水过程的危险性等级最高,分别有80.0%、35.0%和1.7%的小流域河段流量达到高危险及以上等级。研究可为山区小流域暴雨洪水危险性评估、灾害响应和复盘等提供技术支撑。     

Characterizing flood hazard risk in data-scarce areas,using a remote sensing and GIS-based flood hazard index

The frequency in occurrence and severity of floods has increased globally. However, many regions around the globe, especially in developing countries, lack the necessary field monitoring data to characterize flood hazard risk. This paper puts forward methodology for developing flood hazard maps that define flood hazard risk, using a remote sensing and GIS-based flood hazard index (FHI), for the Nyamwamba watershed in western Uganda. The FHI was compiled using analytical hierarchy process and considered slope, flow accumulation, drainage network density, distance from drainage channel, geology, land use/cover and rainfall intensity as the flood causative factors. These factors were derived from Landsat, SRTM and PERSIANN remote sensing data products, except for geology that requires field data. The resultant composite FHI yielded a flood hazard map pointing out that over 11 and 18% of the study area was very highly and highly susceptible to flooding, respectively, while the remaining area ranged from medium to very low risk. The resulting flood hazard map was further verified using inundation area of a historical flood event in the study area. The proposed methodology was effective in producing a flood hazard map at the watershed local scale, in a data-scarce region, useful in devising flood mitigation measures.     

Probability-weighted hazard maps for comparing different flood risk management strategies: a case study

The study proposes an original methodology for producing probability-weighted hazard maps based on an ensemble of numerical simulations. These maps enable one to compare different strategies for flood risk management. The methodology was applied over a 270-km² flood-prone area close to the left levee system of a 28-km reach of the river Reno (Northern Central Italy). This reach is characterised by the presence of a weir that allows controlled flooding of a large flood-prone area during major events. The proposed probability-weighted hazard maps can be used to evaluate how a structural measure such as the mentioned weir alters the spatial variability of flood hazard in the study area. This article shows an application by constructing two different flood hazard maps: a first one which neglects the presence of the weir using a regular levee system instead, and a second one that reflects the actual geometry with the weir. Flood hazard maps were generated by combining the results of several inundation scenarios, simulated by coupling 1D- and 2D-hydrodynamic models.     

Evaluation of the seismic risk of the unreinforced masonry building stock in Antioquia,Colombia

This work focuses on the exploitation of very high-resolution (VHR) satellite imagery coupled with multi-criteria analysis (MCA) to produce flood hazard maps. The methodology was tested over a portion of the Yialias river watershed basin (Nicosia, Cyprus). The MCA methodology was performed selecting five flood-conditioning factors: slope, distance to channels, drainage texture, geology and land cover. Among MCA methods, the analytic hierarchy process technique was chosen to derive the weight of each criterion in the computation of the flood hazard index (FHI). The required information layers were obtained by processing a VHR GeoEye-1 image and a digital elevation model. The satellite image was classified using an object-based technique to extract land use/cover data, while GIS geoprocessing of the DEM provided slope, stream network and drainage texture data. Using the FHI, the study area was finally classified into seven hazard categories ranging from very low to very high in order to generate an easily readable map. The hazard seems to be severe, in particular, in some urban areas, where extensive anthropogenic interventions can be observed. This work confirms the benefits of using remote sensing data coupled with MCA approach to provide fast and cost-effective information concerning the hazard assessment, especially when reliable data are not available.     

Flood risk analyses—how detailed do we need to be?

Applied flood risk analyses, especially in urban areas, very often pose the question how detailed the analysis needs to be in order to give a realistic figure of the expected risk. The methods used in research and practical applications range from very basic approaches with numerous simplifying assumptions up to very sophisticated, data and calculation time demanding applications both on the hazard and on the vulnerability part of the risk. In order to shed some light on the question of required model complexity in flood risk analyses and outputs sufficiently fulfilling the task at hand, a number of combinations of models of different complexity both on the hazard and on the vulnerability side were tested in a case study. The different models can be organized in a model matrix of different complexity levels: On the hazard side, the approaches/models selected were (A) linear interpolation of gauge water levels and intersection with a digital elevation model (DEM), (B) a mixed 1D/2D hydraulic model with simplifying assumptions (LISFLOOD-FP) and (C) a Saint-Venant 2D zero-inertia hyperbolic hydraulic model considering the built environment and infrastructure. On the vulnerability side, the models used for the estimation of direct damage to residential buildings are in order of increasing complexity: (I) meso-scale stage-damage functions applied to CORINE land cover data, (II) the rule-based meso-scale model FLEMOps+ using census data on the municipal building stock and CORINE land cover data and (III) a rule-based micro-scale model applied to a detailed building inventory. Besides the inundation depths, the latter two models consider different building types and qualities as well as the level of private precaution and contamination of the floodwater. The models were applied in a municipality in east Germany, Eilenburg. It suffered extraordinary damage during the flood of August 2002, which was well documented as were the inundation extent and depths. These data provide an almost unique data set for the validation of flood risk analyses. The analysis shows that the combination of the 1D/2D model and the meso-scale damage model FLEMOps+ performed best and provide the best compromise between data requirements, simulation effort, and an acceptable accuracy of the results. The more detailed approaches suffered from complex model set-up, high data requirements, and long computation times.     

Application of Remote Sensing in Flood Management with Special Reference to Monsoon Asia: A Review

The conventional means to record hydrological parameters of aflood often fail to record an extreme event. Remote sensingtechnology along with geographic information system (GIS)has become the key tool for flood monitoring in recent years.Development in this field has evolved from optical to radarremote sensing, which has provided all weather capabilitycompared to the optical sensors for the purpose of flood mapping.The central focus in this field revolves around delineation of floodzones and preparation of flood hazard maps for the vulnerable areas.In this exercise flood depth is considered crucial for flood hazardmapping and a digital elevation model (DEM) is considered to bethe most effective means to estimate flood depth from remotelysensed or hydrological data. In a flat terrain accuracy of floodestimation depends primarily on the resolution of the DEM. Riverflooding in the developing countries of monsoon Asia is very acutebecause of their heavy dependence on agriculture but any floodestimation or hazard mapping attempt in this region is handicappedby poor availability of high resolution DEMs. This paper presents areview of application of remote sensing and GIS in flood managementwith particular focus on the developing countries of Asia.     

Preliminary Rock-Slope-Susceptibility Assessment Using GIS and the SMR Classification

This paper aims to examine the impact of large-scale structuraladjustments (like the Greater Dhaka Flood Protection Project, GDFPP) on local living environment.It focuses the importance of environmental factors in flood hazard mitigation, and examines theenvironmental attitudes of the floodplain residents arising from the large-scale structural adjustments.Based on `perceived natural hazard research perspectives', this paper examines: (i) the reasons for persistentfloodplain occupation, and (ii) the importance of environmental factors in the choice, motivations and decision-makingof floodplain residents.This research used data collected from 300 households situated inthe eastern part of Dhaka. The face-to-face household survey data provided individuals' responses to a structuredquestionnaire on hazards and environment. Survey concerned urban floodplains, and looked fordata on housing, household characteristics, and residents' attitudes. Results of interview surveys wereused to: (i) explore the reasons of floodplain occupation, and (ii) residents' attitudes to tolerable levelof flood risk and willingness to accept environmental change resulting from the proposed structural embankments inthe eastern perimeter of Dhaka City, Bangladesh.Findings revealed that floodplain occupation (by theindividuals' decision-making) was a result of overall reaction to the Government's structuraladjustment policies that resulted from institutional, locational and socio-economic factors. The attitude survey results provided residents' perception to hazards and environment to be dependenton the socio-economic factors – but in a complex manner, many factors are interrelated.In addition to support for structural embankments, the study sample displayed a common concernand widespread environmental awareness. In terms of any `trade-off' between thebenefits (resources) from the embankments and costs (hazards) due to the detrimental impact on environment, the residents of Dhaka, despite some concern forsacrificing embankments for environment, tended to show a generalconsensus for embankments.     

Assessing flood hazard using flood marks and analytic hierarchy process approach: a case study for the 2013 flood event in Quang Nam,Vietnam

The production of flood hazard assessment maps is an important component of flood risk assessment. This study analyses flood hazard using flood mark data. The chosen case study is the 2013 flood event in Quang Nam, Vietnam. The impacts of this event included 17 deaths, 230 injuries, 91,739 flooded properties, 11,530 ha of submerged and damaged agricultural land, 85,080 animals killed and widespread damage to roads, canals, dykes and embankments. The flood mark data include flood depth and flood duration. Analytic hierarchy process method is used to assess the criteria and sub-criteria of the flood hazard. The weights of criteria and sub-criteria are generated based on the judgements of decision-makers using this method. This assessment is combined into a single map using weighted linear combination, integrated with GIS to produce a flood hazard map. Previous research has usually not considered flood duration in flood hazard assessment maps. This factor has a rather strong influence on the livelihood of local communities in Quang Nam, with most agricultural land within the floodplain. A more comprehensive flood hazard assessment mapping process, with the additional consideration of flood duration, can make a significant contribution to flood risk management activities in Vietnam.     

Study of regional monsoonal effects on landslide hazard zonation in Cameron Highlands, Malaysia

In general, landslides in Malaysia mostly occurred during northeast and southwest periods, two monsoonal systems that bring heavy rain. As the consequence, most landslide occurrences were induced by rainfall. This paper reports the effect of monsoonal-related geospatial data in landslide hazard modeling in Cameron Highlands, Malaysia, using Geographic Information System (GIS). Land surface temperature (LST) data was selected as the monsoonal rainfall footprints on the land surface. Four LST maps were derived from Landsat 7 thermal band acquired at peaks of dry and rainy seasons in 2001. The landslide factors chosen from topography map were slope, slope aspect, curvature, elevation, land use, proximity to road, and river/lake; while from geology map were lithology and proximity to lineament. Landslide characteristics were extracted by crossing between the landslide sites of Cameron Highlands and landslide factors. Using which, the weighting system was derived. Each landslide factors were divided into five subcategories. The highest weight values were assigned to those having the highest number of landslide occurrences. Weighted overlay was used as GIS operator to generate landslide hazard maps. GIS analysis was performed in two modes: (1) static mode, using all factors except LST data; (2) dynamic mode, using all factors including multi-temporal LST data. The effect of addition of LST maps was evaluated. The final landslide hazard maps were divided into five categories: very high risk, high risk, moderate, low risk, and very low risk. From verification process using landslide map, the landslide model can predict back about 13–16% very high risk sites and 70–93% of very high risk and high risk combined together. It was observed however that inclusion of LST maps does not necessarily increase the accuracy of the landslide model to predict landslide sites.     

Assessment of flood hazard based on natural and anthropogenic factors using analytic hierarchy process (AHP)

Flooding is the most common natural hazard in Greece, and most of low-lying urban centers are flood-prone areas. Assessment of flood hazard zones is a necessity for rational management of watersheds. In this study, the coupling of the analytical hierarchy process and geographical information systems were used, in order to assess flood hazard, based either on natural or on anthropogenic factors. The proposed method was applied on Kassandra Peninsula, in Northern Greece. The morphometric and hydrographic characteristics of the watersheds were calculated. Moreover, the natural flood genesis factors were examined, and subsequently, the anthropogenic interventions within stream beds were recorded. On the basis of the above elements, two flood hazard indexes were defined, separately for natural and anthropogenic factors. According to the results of these indexes, the watersheds of the study area were grouped into hazard classes. At the majority of watersheds, the derived hazard class was medium (according to the classification) due to natural factors and very high due to anthropogenic. The results were found to converge to historical data of flood events revealing the realistic representation of hazard on the relating flood hazard maps.     

Flood inundation mapping and hazard assessment of Baitarani River basin using hydrologic and hydraulic model

Frequent flood is a concern for most of the coastal regions of India. The importance of flood maps in governing strategies for flood risk management is of prime importance. Flood inundation maps are considered dependable output generated from simulation results from hydraulic models in evaluating flood risks. In the present work, a continuous hydrologic-hydraulic model has been implemented for mapping the flood, caused by the Baitarani River of Odisha, India. A rainfall time-series data were fed into the hydrologic model and the runoff generated from the model was given as an input into the hydraulic model. The study was performed using the HEC-HMS model and the FLO-2D model to map the extent of flooding in the area. Shuttle Radar Topographic Mission (SRTM) 90 m Digital Elevation Model (DEM) data, Land use/Land cover map (LULC), soil texture data of the basin area were used to compute the topographic and hydraulic parameters. Flood inundation was simulated using the FLO-2D model and based on the flow depth, hazard zones were specified using the MAPPER tool of the hydraulic model. Bhadrak District was found to be the most hazard-prone district affected by the flood of the Baitarani River. The result of the study exhibited the hydraulic model as a utile tool for generating inundation maps. An approach for assessing the risk of flooding and proper management could help in mitigating the flood. The automated procedure for mapping and the details of the study can be used for planning flood disaster preparedness in the worst affected area.

     

Flood monitoring, mapping and assessing capabilities using RADARSAT remote sensing, GIS and ground data for Bangladesh

Remote sensing is the most practical method available to managers of flood-prone areas for quantifying and mapping flood impacts. This study explored large inundation areas in the Maghna River Basin, around the northeastern Bangladesh, as determined from passive sensor LANDSAT data and the cloud-penetrating capabilities of the active sensors of the remote imaging microwave RADARSAT. This study also used passive sensor LANDSAT wet and dry images for the year 2000. Spatial resolution was 30 m by 30 m for comparisons of the inundation area with RADARSAT images. RADARSAT images with spatial resolution of 50 m by 50 m were used for frequency analysis of floods from 2000 to 2004. Time series images for 2004 were also used. RADARSAT remote sensing data, GIS data, and ground data were used for the purpose of flood monitoring, mapping and assessing. A supervised classification technique was used for this processing. They were processed for creating a maximum water extent map and for estimating inundation areas. The results of this study indicated that the maximum extent of the inundation area as estimated using RADARSAT satellite imaging was about 29, 900.72 km² in 2004, which corresponded well with the heavy rainfall around northeast region, as seen at the Bhairab Bazar station and with the highest water level of the Ganges–Brahmaputra–Meghna (GBM) Rivers. A composite of 5 years of RADARSAT inundation maps from 2000 to 2004, GIS data, and damage data, was used to create unique flood hazard maps. Using the damage data for 2004 and the GIS data, a set of damage maps was also created. These maps are expected to be useful for future planning and flood disaster management. Thus, it has been demonstrated that RADARSAT imaging data acquired over the Bangladesh have the ability to precisely assess and clarify inundation areas allowing for successful flood monitoring, mapping and disaster management.     

GIS-based flood risk assessment in suburban areas: a case study of the Fangshan District,Beijing

Suburban areas have become rapid development zones during China’s current urbanization. Generally, these areas are also regional precipitation centers that are prone to flood disasters. Therefore, it is important to assess the flood risk in suburban areas. In this study, flood risk was defined as the product of hazard and vulnerability based on disaster risk theory. A risk assessment index system was established, and the analytic hierarchy process method was used to determine the index weight. The Fangshan District in Beijing, China, which is an example of a typical suburban area undergoing rapid urbanization, was selected for this study. Six factors were considered in relation to hazard, and three factors were considered for vulnerability. Each indicator was discretized, standardized, weighted, and then combined to obtain the final flood risk map in a geographical information system environment. The results showed that the high and very high risk zones in the Fangshan District were primarily concentrated on Yingfeng Street, Xingcheng Street, Xincheng Street, and Chengguanzhen Street. The comparison to an actual flood disaster suggested that the method was effective and practical. The method can quantitatively reflect the relative magnitude and spatial distribution patterns of flood risk in a region. The method can be applied easily to most suburban areas in China for land use planning and flood risk management.     

Interaction between land-use change,flooding and human health in Metro Vancouver,Canada

Many regions of the world are experiencing an increase in frequency and intensity of floods. There has been increasing understanding among emergency preparedness and natural disaster planners that rapid urbanization is enhancing the risk from river flooding in urban areas. Many regions of Canada have been exposed to particularly severe floods over the course of the last few years, much of this due to land-use change. This study aims at understanding the risk of flooding for the City of Metro Vancouver, British Columbia, Canada, which is located in the Fraser River Delta. The paper presents a fast, efficient and reliable method that can be used to produce vegetation maps from advanced very high resolution radiometer images and SPOT vegetation maps. A 10-day maximum normalized difference vegetation index maps were produced to assess the dynamics of the urbanization process in Vancouver. Remotely sensed data show a significant decrease in vegetation cover in the Metro Vancouver City between 1984 and 2012. The proposed method can be used as an effective tool for raising early land-use change awareness and assist with flood risk management. Flood risk management has a substantial impact on human health and well-being in urban areas, and this flood risk information will be used to assess the impact of flooding and explore the complex relationship between land-use change, urbanization, flooding and impact on urban dwellers.     

Modelling wind-erosion risk in the Laghouat region (Algeria) using geomatics approach

Wind-erosion risk is a challenge that threatens land development in dry-land regions. Soil analysis, remote sensing, climatic, vegetal cover and topographic data were used in a geographic information system (GIS), using multi-criteria analysis (MCA) to map wind-erosion risk (R_we) in Laghouat, Algeria. The approach was based on modelling the risk and incorporating topographic and climatic effects. The maps were coded according to their sensitivity to wind erosion and to their socio-economic potential, from low to very high. By overlapping the effects of these layers, qualitative maps were drawn to reflect the potential sensitivity to wind erosion per unit area. The results indicated that severe wind erosion affects mainly all the southern parts and some parts in the north of Laghouat, where wind-erosion hazard (H_we) is very high in 43% of the total area, and which was affected mainly by natural parameters such as soil, topography and wind. The results also identified features vulnerable to R_we. The product of the hazard and the stake maps indicated the potential risk areas that need preventive measures; this was more than half of the study area, making it essential to undertake environmental management and land-use planning.     

Preliminary flood risk assessment: the case of Athens

Flood mapping, especially in urban areas, is a demanding task requiring substantial (and usually unavailable) data. However, with the recent introduction of the EU Floods Directive (2007/60/EC), the need for reliable, but cost effective, risk mapping at the regional scale is rising in the policy agenda. Methods are therefore required to allow for efficiently undertaking what the Directive terms “preliminary flood risk assessment,” in other words a screening of areas that could potentially be at risk of flooding and that consequently merit more detailed attention and analysis. Such methods cannot rely on modeling, as this would require more data and effort that is reasonable for this high-level, screening phase. This is especially true in urban areas, where modeling requires knowledge of the detailed urban terrain, the drainage networks, and their interactions. A GIS-based multicriteria flood risk assessment methodology was therefore developed and applied for the mapping of flood risk in urban areas. This approach quantifies the spatial distribution of flood risk and is able to deal with uncertainties in criteria values and to examine their influence on the overall flood risk assessment. It can further assess the spatially variable reliability of the resulting maps on the basis of the choice of method used to develop the maps. The approach is applied to the Greater Athens area and validated for its central and most urban part. A GIS database of economic, social, and environmental criteria contributing to flood risk was created. Three different multicriteria decision rules (Analytical Hierarchy Process, Weighted Linear Combination and Ordered Weighting Averaging) were applied, to produce the overall flood risk map of the area. To implement this methodology, the IDRISI Andes GIS software was customized and used. It is concluded that the results of the analysis are a reasonable representation of actual flood risk, on the basis of their comparison with historical flood events.     

Watershed urbanization and changing flood behavior across the Los Angeles metropolitan region

This article examines the effects of watershed urbanization on stream flood behavior in the Los Angeles metropolitan region. Stream gauge data, spatially distributed rainfall data, land use/land cover, and census population data were used to quantify change in flood behavior and urbanization in multiple watersheds. Increase in flood discharge started at the very early stage of the urbanization when the population density was relatively low but the rate of increase of flood discharge varied across watersheds depending on the distribution of the imperviousness surface and flood mitigation practices. This spatial variability in rainfall–runoff indices and the increasing flood risk across the metropolitan region has posed a challenge to the conventional flood emergency management, which usually responds to flood damages rather than being concerned with the broader issues of land use, land cover, and planning. This study pointed out that alternative land use planning and flood management practices could be mitigating the urban flood implemented hazard.     

Integrated methodology for flood risk assessment and application in urban communities of Pakistan

Flood disasters and its consequent damages are on the rise globally. Pakistan has been experiencing an increase in flood frequency and severity along with resultant damages in the past. In addition to the regular practices of loss and damage estimation, current focus is on risk assessment of hazard-prone communities. Risk measurement is complex as scholars engaged in disaster science and management use different quantitative models with diverse interpretations. This study tries to provide clarity in conceptualizing disaster risk and proposes a risk assessment methodology with constituent components such as hazard, vulnerability (exposure and sensitivity) and coping/adaptive capacity. Three communities from different urban centers in Pakistan have been selected based on high flood frequency and intensity. A primary survey was conducted in selected urban communities to capture data on a number of variables relating to flood hazard, vulnerability and capacity to compute flood risk index. Households were categorized into different risk levels, such as can manage risk, can survive and cope, and cannot cope. It was found that risk levels varied significantly across the households of the three communities. Metropolitan city was found to be highly vulnerable as compared to smaller cities due to weak capacity. Households living in medium town had devised coping mechanisms to manage risk. The proposed methodology is tested and found operational for risk assessment of flood-prone areas and communities irrespective of locations and countries.     

Characterization and assessment of groundwater resources using hydrogeochemical analysis,GIS, and field data in southern Wadi Qena,Egypt

An integrated approach using hydrogeochemical analysis, remote sensing, GIS, and field data was employed to characterize the groundwater resources in southern Wadi Qena, Egypt. Various thematic maps showing topography, lineaments, wadi deposits, slope, and stream networks were combined through GIS analysis to discriminate groundwater potential zones on the valley floor. The resulting map classifies the area into five groups of groundwater potentiality from very high to very low zones, supported by the groundwater level, well locations, and by the results of previous geophysical studies. Thirty-seven groundwater well data were tested from the Quaternary and Nubian Sandstone aquifers and analyzed for physio-chemical parameters. Results of hydrochemical analysis show that water quality varies widely through the aquifers, and groundwater in the Quaternary aquifer shows the highest salinity values and a predominance of Na and Cl in water chemical facies. Overlay GIS maps of alkalinity (SAR and RSC) and salinity hazards (EC and Cl) of the Quaternary aquifer were prepared. The resulting maps show that samples do not present an alkalinity hazard in most areas but are potentially salinity hazard. Therefore, the water is fit for agricultural use with certain restrictions, but is not suitable for direct human consumption because it is either very hard or too saline.