Regional landslide susceptibility analysis using back-propagation neural network model at Cameron Highland,Malaysia

This paper presents landslide susceptibility analysis around the Cameron Highlands area, Malaysia using a geographic information system (GIS) and remote sensing techniques. Landslide locations were identified in the study area from interpretation of aerial photographs and field surveys. Topographical, geological data and satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. Ten landslide occurrence factors were selected as: topographic slope, topographic aspect, topographic curvature and distance from drainage, lithology and distance from lineament, soil type, rainfall, land cover from SPOT 5 satellite images, and the vegetation index value from SPOT 5 satellite image. These factors were analyzed using an advanced artificial neural network model to generate the landslide susceptibility map. Each factor’s weight was determined by the back-propagation training method. Then, the landslide susceptibility indices were calculated using the trained back-propagation weights, and finally, the landslide susceptibility map was generated using GIS tools. The results of the neural network model suggest that the effect of topographic slope has the highest weight value (0.205) which has more than two times among the other factors, followed by the distance from drainage (0.141) and then lithology (0.117). Landslide locations were used to validate the results of the landslide susceptibility map, and the verification results showed 83% accuracy. The validation results showed sufficient agreement between the computed susceptibility map and the existing data on landslide areas.     

Analytic network process (ANP)-based spatial decision support system (SDSS) for sustainable tourism planning in Cameron Highlands,Malaysia

Sustainable approach to tourism development is rarely addressed among authorities and participants. This research presents an approach based on an integrated use of analytic network process (ANP) and geographic information system (GIS) for sustainable tourism planning in Cameron Highlands, Malaysia. ANP was utilized to evaluate the relative priorities for the sustainable tourism development of the highlands based on chosen criteria. ANP results were then transferred into GIS environment and attached to their respective criterion maps. Subsequently, GIS-based sustainable tourism map was generated, which defines the various types of tourism activities that are compatible with the highlands according to the sensitivity of the highland’s environment. The final output was validated using Cameron Highlands Local Plan.     

Probabilistic landslide hazards and risk mapping on Penang Island, Malaysia

This paper deals with landslide hazards and risk analysis of Penang Island, Malaysia using Geographic Information System (GIS) and remote sensing data. Landslide locations in the study area were identified from interpretations of aerial photographs and field surveys. Topographical/geological data and satellite images were collected and processed using GIS and image processing tools. There are ten landslide inducing parameters which are considered for landslide hazard analysis. These parameters are topographic slope, aspect, curvature and distance from drainage, all derived from the topographic database; geology and distance from lineament, derived from the geologic database; landuse from Landsat satellite images; soil from the soil database; precipitation amount, derived from the rainfall database; and the vegetation index value from SPOT satellite images. Landslide susceptibility was analyzed using landslide-occurrence factors employing the probability-frequency ratio model. The results of the analysis were verified using the landslide location data and compared with the probabilistic model. The accuracy observed was 80.03%. The qualitative landslide hazard analysis was carried out using the frequency ratio model through the map overlay analysis in GIS environment. The accuracy of hazard map was 86.41%. Further, risk analysis was done by studying the landslide hazard map and damageable objects at risk. This information could be used to estimate the risk to population, property and existing infrastructure like transportation network.     

Use of GIS-based fuzzy logic relations and its cross application to produce landslide susceptibility maps in three test areas in Malaysia

Landslides are one of the most frequent and common natural hazards in Malaysia. Preparation of landslide susceptibility maps is one of the first and most important steps in the landslide hazard mitigation. However, due to complex nature of landslides, producing a reliable susceptibility map is not easy. For this reason, a number of different approaches have been used, including direct and indirect heuristic approaches, deterministic, probabilistic, statistical, and data mining approaches. Moreover, these landslides can be systematically assessed and mapped through a traditional mapping framework using geoinformation technologies. Since the early 1990s, several mathematical models have been developed and applied to landslide hazard mapping using geographic information system (GIS). Among various approaches, fuzzy logic relation for mapping landslide susceptibility is one of the techniques that allows to describe the role of each predisposing factor (landslide-conditioning parameters) and their optimal combination. This paper presents a new attempt at landslide susceptibility mapping using fuzzy logic relations and their cross application of membership values to three study areas in Malaysia using a GIS. The possibility of capturing the judgment and the modeling of conditioning factors are the main advantages of using fuzzy logic. These models are capable to capture the conditioning factors directly affecting the landslides and also the inter-relationship among them. In the first stage of the study, a landslide inventory was complied for each of the three study areas using both field surveys and airphoto studies. Using total 12 topographic and lithological variables, landslide susceptibility models were developed using the fuzzy logic approach. Then the landslide inventory and the parameter maps were analyzed together using the fuzzy relations and the landslide susceptibility maps produced. Finally, the prediction performance of the susceptibility maps was checked by considering field-verified landslide locations in the studied areas. Further, the susceptibility maps were validated using the receiver-operating characteristics (ROC) success rate curves. The ROC curve technique is based on plotting model sensitivity—true positive fraction values calculated for different threshold values versus model specificity—true negative fraction values on a graph. The ROC curves were calculated for the landslide susceptibility maps obtained from the application and cross application of fuzzy logic relations. Qualitatively, the produced landslide susceptibility maps showed greater than 82% landslide susceptibility in all nine cases. The results indicated that, when compared with the landslide susceptibility maps, the landslides identified in the study areas were found to be located in the very high and high susceptibility zones. This shows that as far as the performance of the fuzzy logic relation approach is concerned, the results appeared to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.     

Manifestation of remote sensing data and GIS on landslide hazard analysis using spatial-based statistical models

This paper presents landslide hazard analysis at Cameron area, Malaysia, using a geographic information system (GIS) and remote sensing data. Landslide locations were identified from interpretation of aerial photographs and field surveys. Topographical and geological data and satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. The factors chosen that influence landslide occurrence are topographic slope, topographic aspect, topographic curvature, and distance to rivers, all from the topographic database; lithology and distance to faults were taken from the geologic database; land cover from TM satellite image; the vegetation index value was taken from Landsat images; and precipitation distribution from meteorological data. Landslide hazard area was analyzed and mapped using the landslide occurrence factors by frequency ratio and bivariate logistic regression models. The results of the analysis were verified using the landslide location data and compared with the probabilistic models. The validation results showed that the frequency ratio model (accuracy is 89.25%) is better in prediction of landslide than bivariate logistic regression (accuracy is 85.73%) model.     

Landslide hazard mapping along national highway-154A in Himachal Pradesh,India using information value and frequency ratio

For the socio-economic development of a country, the highway network plays a pivotal role. It has therefore become an imperative to have landslide hazard assessment along these roads to provide safety. The current study presents landslide hazard zonation maps, based on the information value method and frequency ratio method using GIS on 1:50,000 scale by generating the information about the landslide influencing factors. The study was carried out in the year 2017 on a part of Ravi river catchment along one of the landslide-prone Chamba to Bharmour road corridor of NH-154A in Himachal Pradesh, India. A number of landslide triggering geo-environmental factors like “slope, aspect, relative relief, soil, curvature, Land Use and Land Cover (LULC), lithology, drainage density, and lineament density” were selected for landslide hazard mapping based on landslide inventory. The landslide inventory has been developed using satellite imagery, Google earth and by doing exhaustive field surveys. A digital elevation model was used to generate slope gradient, slope aspect, curvature, and relative relief map of the study area. The other information, i.e., soil maps, geological maps, and toposheets, have been collected from various departments. The landslide hazard zonation map was categorized namely “very high hazard, high hazard, medium hazard, low hazard, and very low hazard.” The results from these two methods have been validated using area under curve (AUC) method. It has been found that hazard zonation map prepared using frequency ratio model had a prediction rate of 75.37% while map prepared using information value method had prediction rate of 78.87%. Hence, on the basis of prediction rate, the landslide hazard zonation map, obtained using information value method, was experienced to be more suitable for the study area.     

Application of a RS- and GIS-based semi-quantitative approach (analytical hierarchy process – AHP) in landslide hazard risk assessment of the Shivkhola Watershed,Darjiling Himalaya

The present study deals with the application of analytical hierarchy process to prepare landslide hazard risk map of the Shivkhola Watershed applying remote sensing and geographic information system (GIS). Firstly, to integrate all the required thematic data layers and to prepare landslide susceptibility map, prioritised class rating value and prioritised factor rating value were obtained by developing couple-comparing matrix with a reasonable consistency and with the help of MATLAB software after Saaty. Three important risk factor/element maps, that is, weighted land use/land cover map, road contributing area map and settlement density map, were developed and their weighted linear combination was performed to prepare landslide risk exposure map. Then by integrating landslide susceptibility map and landslide risk exposure map, a classification was incorporated on ARC GIS Platform to prepare landslide hazard risk map. To evaluate the validity of the landslide hazard risk map, probability/chance of landslide hazard risk event has been estimated by means of frequency ratio between landslide hazard risk area (%) and number of risk events (%) for each landslide hazard risk class. Finally, an accuracy assessment was also made on ERDAS Imagine (8.5) which depicts that the classification accuracy of the landslide hazard risk map was 92.89 with overall Kappa statistics of 0.8929.     

Mapping landslide susceptibility in Travis County, Texas, USA

A geographic information system (GIS) was used to construct a landslide hazard map for Travis County, Texas. The County is experiencing rapid growth, and development has encroached into unstable terrain that is vulnerable to landslides. Four layers of data were superimposed to create the landslide hazard map. Slope was given the most emphasis, followed by geology, vegetation, and proximity to faults. The final map shows areas of low, medium, and high landslide susceptibility. Areas of high susceptibility occupy stream and reservoir banks, rock escarpments, and agricultural land. The landslide hazard map can be a useful geologic criterion for land use planning. Planners can use the map to allocate appropriate land uses to unstable terrain, and to identify existing structures at risk from landslide activity. The methods presented in this paper can be adapted to other counties in the U.S. and elsewhere. Results of this study suggest that geographic information systems can effectively compile and overlay several data layers relevant to landslide hazards.     

利用光学遥感数据、GIS及人工神经网络模型分析区域滑坡灾害(英文)

用光学遥感数据和地理信息系统(GIS)分析了马来西亚Selangor地区的滑坡灾害。通过遥感图像解译和野外调查,在研究区内确定出滑坡发生区。通过GIS和图像处理,建立了一个集地形、地质和遥感图像等多种信息的空间数据库。滑坡发生的因素主要为:地形坡度、地形方位、地形曲率及与排水设备距离;岩性及与线性构造距离;TM图像解译得到的植被覆盖情况;Landsat图像解译得到的植被指数;降水量。通过建立人工神经网络模型对这些因素进行分析后得到滑坡灾害图:由反向传播训练方法确定每个因素的权重值,然后用该权重值计算出滑坡灾害指数,最后用GIS工具生成滑坡灾害图。用遥感解译和野外观测确定出的滑坡位置资料验证了滑坡灾害图,准确率为82.92%。结果表明推测的滑坡灾害图与滑坡实际发生区域足够吻合。     

RS与GIS支持下的汶川县城周边地质灾害危险性评价

地质灾害危险性评价是防灾减灾工作的重要依据。本文以汶川县城周边64 km2为例,应用遥感信息提取技术与GIS空间分析方法,根据IKONOS遥感图像和地形图及野外调查资料,提取了崩塌和滑坡易发性评价因子,采用信息量法确定了因子分值,计算了崩塌和滑坡易发性,并分别提出崩塌和滑坡的危险性计算方法,形成了汶川地区崩塌和滑坡危险性分区图。研究结果表明:新的崩塌和滑坡危险性评价方法能够反映区内地质灾害危险程度,该方法可行,结果合理,这为中、大比例尺区域范围内地质灾害危险性研究提供了有益的思路。     

浙江省永嘉县滑坡灾害危险性区划

永嘉县是浙江省滑坡灾害发生频繁的区县之一,其滑坡受地质、地形和人类工程活动等因素的影响。本文根据永嘉县滑坡灾害分布情况,选择了影响滑坡分布的主要因素,将各种因子归一化处理后转换成相同分辨率的定量数据,选择了逻辑回归分析模型和信息量模型进行滑坡灾害危险性评价。在逻辑回归模型中,利用SPSS软件,通过逐步回归分析筛选出影响滑坡的最直接的因子,计算出各个因子的回归系数,得到逻辑回归方程,据此编制了危险性预测分区图。在信息量模型中,通过MAPGIS软件及其二次开发的信息量模型,对永嘉县滑坡灾害进行了危险性区划,并依信息量法的结果编制了该区的危险性预测分区图。两种方法所编制的危险性分区图中高危险区和中危险区重合率达到了87%,具有很高的一致性,起到了相互验证的作用,为滑坡的有效防治提供了依据。最后根据"云娜"台风期间永嘉县实际灾害发生情况的资料分析,新灾害点绝大部分落在危险性预测区中的高危险区,表明模型的预测准确率很高。     

Landslide susceptibility analysis using probabilistic likelihood ratio model—a geospatial-based study

The crucial and difficult task in landslide susceptibility analysis is estimating the probability of occurrence of future landslides in a study area under a specific set of geomorphic and topographic conditions. This task is addressed with a data-driven probabilistic model using likelihood ratio or frequency ratio and is applied to assess the occurrence of landslides in the Tevankarai Ar sub-watershed, Kodaikkanal, South India. The landslides in the study area are triggered by heavy rainfall. Landslide-related factors—relief, slope, aspect, plan curvature, profile curvature, land use, soil, and topographic wetness index proximity to roads and proximity to lineaments—are considered for the study. A geospatial database of the related landslide factors is constructed using Arcmap in GIS environment. Landslide inventory of the area is produced by detailed field investigation and analysis of the topographical maps. The results are validated using temporal data of known landslide locations. The area under the curve shows that the accuracy of the model is 85.83%. In the reclassified final landslide susceptibility map, 14.48% of the area is critical in nature, falling under the very high hazard zone, and 67.86% of the total validation dataset landslides fall in this zone. This landslide susceptibility map is a vital tool for town planning, land use, and land cover planning and to reduce risks caused by landslides.     

The application of GIS-based bivariate statistical methods for landslide hazards assessment in the upper Tons river valley,Western Himalaya,India

Landslides are one of the most frequent and common natural hazards in many parts of Himalaya. To reduce the potential risk, the landslide susceptibility maps are one of the first and most important steps in the landslide hazard mitigation. Earth observation satellite and geographical information system-based techniques have been used to derive and analyse various geo-environmental parameters significant to landslide hazards. In this study, a bivariate statistics method was used for spatial modelling of landslide susceptibility zones. For this purpose, thematic layers including landslide inventory, geology, slope angle, slope aspect, geomorphology, slope morphology, drainage density, lineament and land use/land cover were used. A large number of landslide occurrences have been observed in the upper Tons river valley area of Western Himalaya. The result has been used to spatially classify the study area into zones of very high, high, moderate, low and very low landslide susceptibility zones. About 72% of active landslides have been observed to occur in very high and high hazard zones. The result of the analysis was verified using the landslide location data. The validation result shows significant agreement between the susceptibility map and landslide location. The result can be used to reduce landslide hazards by proper planning.     

Landslide hazard zoning along Himalayan Kaghan Valley of Pakistan��by integration of GPS, GIS, and remote sensing technology

This paper presents a methodology for developing a landslide hazard zonation map by integration of global positioning system (GPS), geographic information system (GIS), and remote sensing (RS) for Western Himalayan Kaghan Valley of Pakistan. The landslides in the study area have been located and mapped by using GPS. Eleven causative factors such as landuse, elevation, geology, rainfall intensity, slope inclination, soil, slope aspect, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams were analyzed for occurrence of landslides. These factors were used with a modified form of pixel-based information value model to obtain landslide hazard zones. The matrix analysis was performed in remote sensing to produce a landslide hazard zonation map. The causative factors with the highest effect of landslide occurrence were landuse, rainfall intensity, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams. In conclusion, we found that landslide occurrence was only in moderate, high, or very high hazard zones, and no landslides were in low or very low hazard zones showing 100% accuracy of our results. The landslide hazard zonation map showed that the current main road of the valley was in the zones of high or very high hazard. Two new safe road routes were suggested by using the GIS technology.     

Landslide vulnerability mapping using frequency ratio model: a geospatial approach in Bodi-Bodimettu Ghat section, Theni district, Tamil Nadu, India

This research paper assesses the vulnerability of landslide for the Bodi-Bodimettu Ghat section, Theni district, Tamil Nadu, India, using remotely sensed data and geographic information system (GIS). Landslide database was generated using IRS-1C satellite LISS III data and aerial photographs accompanied by field investigations using differential global positioning system to generate a landslide inventory map. Topographical, spatial, and field data were processed to construct the spatial thematic layers using image processing and GIS environment. Twelve landslide-inducing factors were used for landslide vulnerability analysis: elevation, slope, aspect, plan curvature, profile curvature, proximity to road, drainage and lineament, land use/land cover, geology, geomorphology, and run-off. The first five factors were derived from digital elevation model, and other thematic layers were prepared from spatial database. Frequency ratio of each factor was computed using the above thematic factors with past landslide locations. Landslide vulnerability map was produced using raster analysis. The landslide vulnerability map was classified into five zones: very low, low, moderate, high, and very high. The model is validated using the relative landslide density index (R-index method). The consistency of R-index indicates good performance of the vulnerability map.     

Landslide hazard zonation using analytical hierarchy process along National Highway-3 in mid Himalayas of Himachal Pradesh,India

Landslide zonation studies emphasize on preparation of landslide hazard zonation maps considering major instability factors contributing to occurrence of landslides. This paper deals with geographic information system-based landslide hazard zonation in mid Himalayas of Himachal Pradesh from Mandi to Kullu by considering nine relevant instability factors to develop the hazard zonation map. Analytical hierarchy process was applied to assign relative weightages over all ranges of instability factors of the slopes in study area. To generate landslide hazard zonation map, layers in geographic information system were created corresponding to each instability factor. An inventory of existing major landslides in the study area was prepared and combined with the landslide hazard zonation map for validation purpose. The validation of the model was made using area under curve technique and reveals good agreement between the produced hazard map and previous landslide inventory with prediction accuracy of 79.08%. The landslide hazard zonation map was classified by natural break classifier into very low hazard, low hazard, moderate hazard, high hazard and very high landslide hazard classes in geographic information system depending upon the frequency of occurrence of landslides in each class. The resultant hazard zonation map shows that 14.30% of the area lies in very high hazard zone followed by 15.97% in high hazard zone. The proposed model provides the best-fit classification using hierarchical approach for the causative factors of landslides having complex structure. The developed hazard zonation map is useful for landslide preparedness, land-use planning, and social-economic and sustainable development of the region.     

A GIS-based landslide susceptibility evaluation using bivariate and multivariate statistical analyses

Bivariate and multivariate statistical analyses were used to predict the spatial distribution of landslides in the Cuyahoga River watershed, northeastern Ohio, U.S.A. The relationship between landslides and various instability factors contributing to their occurrence was evaluated using a Geographic Information System (GIS) based investigation. A landslide inventory map was prepared using landslide locations identified from aerial photographs, field checks, and existing literature. Instability factors such as slope angle, soil type, soil erodibility, soil liquidity index, landcover pattern, precipitation, and proximity to stream, responsible for the occurrence of landslides, were imported as raster data layers in ArcGIS, and ranked using a numerical scale corresponding to the physical conditions of the region. In order to investigate the role of each instability factor in controlling the spatial distribution of landslides, both bivariate and multivariate models were used to analyze the digital dataset. The logistic regression approach was used in the multivariate model analysis. Both models helped produce landslide susceptibility maps and the suitability of each model was evaluated by the area under the curve method, and by comparing the maps with the known landslide locations. The multivariate logistic regression model was found to be the better model in predicting landslide susceptibility of this area. The logistic regression model produced a landslide susceptibility map at a scale of 1:24,000 that classified susceptibility into four categories: low, moderate, high, and very high. The results also indicated that slope angle, proximity to stream, soil erodibility, and soil type were statistically significant in controlling the slope movement.     

Landslide vulnerability and risk assessment for multi-hazard scenarios using airborne laser scanning data (LiDAR)

Landslide hazard, vulnerability, and risk-zoning maps are considered in the decision-making process that involves land use/land cover (LULC) planning in disaster-prone areas. The accuracy of these analyses is directly related to the quality of spatial data needed and methods employed to obtain such data. In this study, we produced a landslide inventory map that depicts 164 landslide locations using high-resolution airborne laser scanning data. The landslide inventory data were randomly divided into a training dataset: 70 % for training the models and 30 % for validation. In the initial step, a susceptibility map was developed using logistic regression approach in which weights were assigned to every conditioning factor. A high-resolution airborne laser scanning data (LiDAR) was used to derive the landslide conditioning factors for the spatial prediction of landslide hazard areas. The resultant susceptibility was validated using the area under the curve method. The validation result showed 86.22 and 84.87 % success and prediction rates, respectively. In the second stage, a landslide hazard map was produced using precipitation data for 15 years. The precipitation maps were subsequently prepared and show two main categories (two temporal probabilities) for the study area (the average for any day in a year and abnormal intensity recorded in any day for 15 years) and three return periods (15-, 10-, and 5-year periods). Hazard assessment was performed for the entire study area. In the third step, an element at risk map was prepared using LULC, which was considered in the vulnerability assessment. A vulnerability map was derived according to the following criteria: cost, time required for reconstruction, relative risk of landslide, risk to population, and general effect to certain damage. These criteria were applied only on the LULC of the study area because of lack of data on the population and building footprint and types. Finally, risk maps were produced using the derived vulnerability and hazard information. Thereafter, a risk analysis was conducted. The LULC map was cross-matched with the results of the hazard maps for the return period, and the losses were aggregated for the LULC. Then, the losses were calculated for the three return periods. The map of the risk areas may assist planners in overall landslide hazard management.     

Landslides susceptibility mapping based on geographical information system,GuiZhou, south-west China

The purpose of this study is to assess the susceptibility of landslides around the area of Guizhou province, in south-west of China, using a geographical information system (GIS). The base map is prepared by visiting the field area and mapping individual landslide at a scale of 1:500,000 topographic maps. In the study, slope, lithology, landslide inventory, tectonic activity, drainage distribution and annual precipitation were taken as independent causal factors. Therefore, six causal factors maps are prepared by collecting information from various authorized sources and converting them in to GIS maps. The susceptibility assessment is based on the qualitative map combination model and trapezoidal fuzzy number weighting (TFNW) approach. Using a predicted map of probability, the study area was classified into four categories of landslide susceptibility: low, moderate, high and very high. In addition, the weighting procedure showed that the TFNW is an efficient method for landslide causal factors weighting.     

Landslide susceptibility mapping of Tevankarai Ar sub-watershed,Kodaikkanal taluk,India, using weighted similar choice fuzzy model

This paper deals with the landslide susceptibility zonation of Tevankarai Ar sub-watershed using weighted similar choice fuzzy method in a GIS environment. There has been a rapid increase in landslide occurrences in the Kodaikkanal town and area surrounding the town specially in the settlements around the town and road links leading to and from the town. This necessitates a detailed study of slope instability problems in this area. It is observed that these incidences occur frequently during the monsoon and summer showers. Rainfall is identified as the prime triggering factor. Eleven physical factors that cause instability are identified as causative factors from the field investigations and landslide occurrences. Land use pattern, slope gradient, curvature and aspect, weathering index which are evaluated from the weathering ratios of different chemical constituents of the three major lithological variations, soil type, hydraulic conductivity of soil and soil thickness, geomorphology, drainage, and lineament have been utilized to prepare the spatial variation. A weighted similar choice fuzzy model which ranks a set of alternatives by identifying the similarity between the outcome of alternatives and outcome of ideal alternatives is used to rank the causative factors. Each causative factor is classified into sub-categories and rated based on their effect on stimulating the landslide event using qualitative judgment derived from field studies and landslide history. The prepared thematic maps of causative factors are integrated, utilizing the GIS software Arcmap. The outcome has projected the low, moderate, high, and very high landslide susceptibility zones. The high-hazard and very high-hazard areas fall in the northwestern part characterized by croplands and agricultural plantations, while the moderate hazard zones are seen in prominent settlements and low-hazard zones are observed in the sparse settlements and zones of less agricultural activity. The model is verified using the relative landslide density (R) index, and the susceptibility map is found to be consistent with the mapped landslide incidences. The results from this study illustrate that the use of weighted similar choice fuzzy method is suitable for landslide susceptibility mapping on regional scale in growing hill towns as Kodaikkanal town.