A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

What type was SN 1987A?

A comparison is made of the light and colour curves of the SN 1987A in the first 280 days with the mean properties of type II supernovae. The conclusion is that even though it has H lines, and was not a typical type II supernova, but a peculiar object from a photometric point of view. The implications for inclusion of SN 1987A in the context of the usual Minkowski-Zwicky classification are explicitly discussed.     

Notes on Hori Method for Canonical Systems

In this paper a slightly different approach is proposed for the process of determining the functions S _m and H _m ^* of the algorithm of the canonical version of Hori method. This process will be referred to as integration theory of the mth order equation of the method. It will be shown that the ordinary differential equation with an auxiliary parameter t ^* as independent variable, introduced through Hori auxiliary system, can be replaced by a partial differential equation in the time t. In this way, the mth order equation of the algorithm assumes a form very similar to the one of other perturbation methods. In virtue of this new approach of the integration theory for Hori method, Lagrange's variational equations introduced by Sessin are revised. As an example, the Duffing equation is solved through this new approach.     

Baryon loading and the Weibel instability in gamma-ray bursts

The dynamics of two counter-streaming electron–positron–ion unmagnetized plasma shells with zero net charge is analysed in the context of magnetic field generation in gamma-ray burst internal shocks due to the Weibel instability. The effects of large thermal motion of plasma particles, arbitrary mixture of plasma species and space charge effects are taken into account. We show that, although thermal effects slow down the instability, baryon loading leads to a non-negligible growth rate even for large temperatures and different shell velocities, thus guaranteeing the robustness and the occurrence of the Weibel instability for a wide range of scenarios.     

Geochemistry of S-type granitic rocks from the reversely zoned Castelo Branco pluton (central Portugal)

The zoned pluton from Castelo Branco consists of Variscan peraluminous S-type granitic rocks. A muscovite>biotite granite in the pluton's core is surrounded successively by biotite>muscovite granodiorite, porphyritic biotite>muscovite granodiorite grading to biotite=muscovite granite, and finally by muscovite>biotite granite. ID-TIMS U–Pb ages for zircon and monazite indicate that all phases of the pluton formed at 310 ± 1 Ma. Whole-rock analyses show slight variation in ⁸⁷Sr/⁸⁶Sr_310 Ma between 0.708 and 0.712, Nd_310 Ma values between − 1 and − 4 and δ¹⁸O values between 12.2 and 13.6. These geological, mineralogical, geochemical and isotopic data indicate a crustal origin of the suite, probably from partial melting of heterogeneous Early Paleozoic pelitic country rock. In detail there is evidence for derivation from different sources, but also fractional crystallization linking some of internal plutonic phases. Least-squares analysis of major elements and modelling of trace elements indicate that the porphyritic granodiorite and biotite=muscovite granite were derived from the granodiorite magma by fractional crystallization of plagioclase, quartz, biotite and ilmenite. By contrast variation diagrams of major and trace elements in biotite and muscovite, the behaviours of Ba in microcline and whole-rock δ¹⁸O, the REE patterns of rocks and isotopic data indicate that both muscovite-dominant granites were probably originated by two distinct pulses of granite magma.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

An analysis of 3.5 kHz acoustic reflections and sediment physical properties

Near-bottom normal incidence acoustic reflection data and sediment physical property data are used to study the relationships between acoustic reflections and sediment physical properties. A pinger-hydrophone experiment was performed to obtain the necessary acoustic reflection data. In addition, a standard piston core was retrieved in the acoustic survey area for physical property analysis. The piston core was sampled and 13 properties were measured at 55 locations within the top 12 m of the core. Correlation studies amongst the sediment physical properties resulted in the following strong correlations: acoustic impedance ($\text{Z}$) and porosity ($\text{N}$), (0.96); water content ($\text{WC}$) and $\text{Z}$, (0.95); bulk density ($\text{BD}$) and $\text{Z}$, (0.99).The empirical orthonormal function (EOF) method was employed for acoustic signal analysis. This method assumes no a-priori models of the sediment or causality. The EOF method reduced the acoustic data to 8 functions that contained 97.6% of the sample variance. The EOFs were subsequently analysed by using cepstrum analysis which reveals time delay information and enhances detecting zones of reflectivity. The result of the sediment physical property and cepstrum analysis indicates that zones of reflectivity are essentially zones of relatively high acoustic impedance, low porosity, and low phi (high mean grain size).     

Sustainable shellfish aquaculture in Saldanha Bay,South Africa

The carrying capacity for bivalve shellfish culture in Saldanha Bay, South Africa, was analysed through the application of the well-tested EcoWin ecological model, in order to simulate key ecosystem variables. The model was set up using: (i) oceanographic and water-quality data collected from Saldanha Bay, and (ii) culture-practice information provided by local shellfish farmers. EcoWin successfully reproduced key ecological processes, simulating an annual mean phytoplankton biomass of 7.5 µg Chl a l^–1 and an annual harvested shellfish biomass of about 3 000 tonnes (t) y^–1, in good agreement with reported yield. The maximum annual carrying capacity of Small Bay was estimated as 20 000 t live weight (LW) of oysters Crassostrea gigas, or alternatively 5 100 t LW of mussels Mytilus galloprovincialis, and for Big Bay as 100 000 t LW of oysters. Two production scenarios were investigated for Small Bay: a production of 4 000 t LW y^–1 of mussels, and the most profitable scenario for oysters of 19 700 t LW y^–1. The main conclusions of this work are: (i) in 2015–2016, both Small Bay and Big Bay were below their maximum production capacity; (ii) the current production of shellfish potentially removes 85% of the human nitrogen inputs; (iii) a maximum-production scenario in both Big Bay and Small Bay would result in phytoplankton depletion in the farmed area; (iv) increasing the production intensity in Big Bay would probably impact the existing cultures in Small Bay; and (v) the production in Small Bay could be increased, resulting in higher income for farmers.     

Longshore drift estimation using fluorescent tracers: New insights from an experiment at Comporta Beach, Portugal

A fluorescent sand-tracer experiment was performed at Comporta Beach (Portugal) with the aim of acquiring longshore sediment transport data on a reflective beach, the optimization of field and laboratory tracer procedures and the improvement of the conceptual model used to support tracer data interpretation.

The field experiment was performed on a mesotidal reflective beach face in low energetic conditions (significant wave height between 0.4 and 0.5 m). Two different colour tracers (orange and blue) were injected at low tide and sampled in the two subsequent low tides using a high resolution 3D grid extending 450 m alongshore and 30 m cross-shore. Marked sand was detected using an automatic digital image processing system developed in the scope of the present experiment.

Results for the two colour tracers show a remarkable coherence, with high recovery rates attesting data validity. Sand tracer displayed a high advection velocity, but with distinct vertical distribution patterns in the two tides: in the first tide there was a clear decrease in tracer advection velocity with depth while in the second tide, the tracer exhibited an almost uniform vertical velocity distribution. This differing behaviour suggests that, in the first tide, the tracer had not reached equilibrium within the transport system, pointing to a considerable time lag between injection and complete mixing. This issue has important implications for the interpretation of tracer data, indicating that short term tracer experiments tend to overestimate transport rates. In this work, therefore, longshore estimates were based on tracer results obtained during the second tide.

The estimated total longshore transport rate at Comporta Beach was 2 × 10^− 3 m³/s, more than four times larger than predicted using standard empirical longshore formulas. This discrepancy, which results from the unusually large active moving layer observed during the experiment, confirms the idea that most common longshore transport equations under-estimate total sediment transport in plunging/surging waves.     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.