A gravel lobe deposit in the prodelta of the Doumsan fan delta (Miocene), SE Korea

The Doumsan fan-delta system in the Pohang Basin (Miocene), SE Korea comprises tripartite components of Gilbert-type topset, foreset, and bottomset environments with an extended prodelta in the deeper part (a few hundred metres deep). The present study documents sedimentologic features and origin of a gravel body (here interpreted as a gravel lobe) formed in the prodelta region of the Doumsan fan delta. The gravel lobe lies on sandy mud deposits and is capped by a thick massive sand bed. It extends for more than 1.5 km with a height of up to 30 m and shows a narrow tongue-like geometry. Eight sedimentary facies have been distinguished to describe characteristic features of the gravel lobe and the associated deposits. Of these, three types of gravelly sedimentary facies are important with regard to volumetric contribution and depositional processes: (1) crudely stratified pebble-grade conglomerate; (2) disorganized, clast-rich pebble(-to-cobble)-grade conglomerate; and (3) matrix-rich, bimodal cobble-grade conglomerate. The former two types dominate the central part of the lobe where they are not accompanied by sand beds, whereas the latter, as subordinate units, is prevalent in the fringe which otherwise is dominated by thick sandy mud deposits. The stacked successions of crudely stratified pebble-grade conglomerate are representative of the active aggradational phases of the gravel lobe, whereas the occurrence of channels within the lobe reflects that the gravel lobe prograded under the influence of subaqueous channel systems. The gravel lobe resulted from catastrophic disturbance (slumping) on the foreset region that further caused the development of channel systems, promoting efficient transport of gravelly sediments. This type of deposit may represent an important additional category of low-efficiency subaqueous fans.     

Depositional environments of some Pleistocene coastal terrace deposits,southwestern Oregon—case history of a progradational beach and dune sequence

Pleistocene coastal terrace deposits exposed in sea cliffs near Gold Beach, Oregon can be divided into four stratigraphic units: a basal gravelly unit and three overlying sandy units, each with mud beds, a paleosol, or the modern soil in its uppermost part. The gravelly unit consists of gravel and sand in its lower part, sand, in part pebbly or cobbly, in its middle part, and mud and sand in its upper part. Black sand and transported pieces of wood are common in the middle part of the unit, and wood is common in the mud. This unit is interpreted as a progradational deposit including environments ranging from lower forebeach at the base to backbeach flats and streams at the top.The main sandy parts of the sandy units are made up of a crossbedded sand facies, the dominant structure in which is medium-scale crossbedding, and an irregularly bedded sand facies, which is locally pebbly and is dominated by scour-and-fill structures. Deciding between shallow marine and eolian interpretations of the sandy units proved exceptionally difficult until modern analogues were found in the fine details of the internal structures. Largely on the basis of such structural details, the crossbedded sand facies is interpreted as the product of small eolian dunes, and the irregularly bedded sand facies is interpreted as deposits of interdune ephemeral streams, ephemeral ponds, and wet to dry subaerial flats. The mud beds and paleosols at the tops of the sandy units represent times of temporary stabilization of the dune field.     

Jet-efflux deposits of a subaqueous ice-contact fan,glacial Lake Rinteln,northwestern Germany

The coarse-grained, ice-contact, Porta Subaqueous Fan/Delta Complex was deposited in glacial Lake Rinteln at the margin of the Saalian ice sheet that advanced south of the Weser Chains, NW Germany. The ice-proximal depositional system was up to 15 km long and 10 km wide. The present study deals with ice-proximal subaqueous fan deposits, which are interpreted as products of a subcritical plane-wall outflow jet that periodically passed into a supercritical jet with hydraulic jump. The proximal facies assemblage consists of the coarse, clast-supported gravelly deposits of a hyperconcentrated (high-density) effluent and of related cohesionless debris flows attributed to the conduit or immediate proximal jet outflow zone of flow establishment. The intermediate facies assemblage, attributed to the outflow jet proximal zone of flow transition, is dominated by normally graded and cross-stratified gravels with scour structures at their bases; these gravels were deposited by a high-density effluent capable of forming mouthbar-like features. These deposits pass downcurrent into an assemblage of planar parallel-stratified and planar and trough cross-stratified sands and pebbly sands (partially interpreted as antidunes), with abundant scour structures and intercalated layers of fine sand/silt and silty mud, attributed to the jet distal zone of flow transition. The distal facies assemblage consists of trough cross-stratified sands and pebbly sands, and is attributed to the outflow jet proximal zone of established flow. The sedimentary succession as a whole has wedge-shape geometry, with a gentle fan-shaped inclination of the bedding from the southeast to the southwest. Repeated vertical alternations of supercritical and subcritical deposits and muddy interlayers can be attributed to temporary fluctuations in the meltwater outflow, whereas the overall upward fining of the succession indicates a net decline of meltwater discharges.     

嫩江现代河流沉积体岩相及内部构形要素分析

嫩江是松辽盆地北部一条多河型河流。本文以黑龙江省富裕县塔哈乡大马岗嫩江现代河流沉积露头为例,运用Miall结构要素分析法对嫩江现代河流沉积体岩相类型、层次界面及内部构形要素进行了系统研究,表明大马岗沉积体主要由块状层理细砾相、大型及小型低角度槽状交错层理细砂相、同沉积变形层理细砂相、波状交错层理细砂相、薄层状粉砂质泥与细砂互层相、微波状层理粉砂相、块状层理泥质粉砂相、水平层理泥相、块状层理粉砂质泥相等16种岩相构成,不同岩相空间分布变化差异较大。在大马岗沉积体内部识别出1～5级层次界面,划分出具有成因意义的7种构形要素:河道、砾质坝、侧向加积沉积体、单一侧积砂层、纹层砂席、砂底形及越岸细粒沉积,这种构形要素的划分丰富了Miall的分类方案。     

Comparison of tropical,carbonate and temperate,siliciclastic tidally dominated sedimentary deposits: Examples from the Australian continental shelf

Surficial deposits of the tidally influenced Australian shelf seas exhibit a variation in fades related to energy gradient. These deposits comprise a high energy gravelly facies, a mobile sand sheet facies and a low energy muddy sand facies. Such a facies distribution conforms generally with the existing model of continental shelf tidal sedimentation, derived for the west European tidal seas. However, the carbonate rich and mainly warm water deposits of the Australian shelf differ from the mainly quartzose and temperate cold‐water deposits of the European type case in terms of: (i) the role of seagrasses in trapping fine‐grained sediment; and (ii) the relative importance of the production of carbonate mud by mechanical erosion of carbonate grains. Seagrasses in Spencer Gulf, Gulf of St Vincent and Torres Strait are located in regions of strong tidal currents, associated with bedforms and gravel lag deposits. Thus, in the case of tropical carbonate shelves, seagrass deposits containing fine‐grained and poorly sorted sediments are located in close proximity to high energy gravel and mobile sand facies. In contrast, the European model (for temperate, siliciclastic shelves) places facies in a regional gradient with a wide separation (in the order of 50–100 km).

Of the locations reviewed, the Gulf of St Vincent, Bass Strait, southern Great Barrier Reef, Torres Strait and Gulf of Carpentaria exhibit zones of carbonate mud accumulation. The production and winnowing of carbonate mud from the mobile sand facies is a factor that must be taken into account in the assessment of a sediment budget for this facies, and which is of relatively greater importance for carbonate shelves. Insufficient data are presently available from the macrotidal North West Shelf to test the applicability of the model to this region.     

Bed forms and stratification types of modern gravel meander lobes, Nueces River, Texas

All major streams draining the southwestern flank of the Edwards Plateau in south-central Texas transport large volumes of gravel and sandy muddy gravel and are developing meander lobe sequences consisting predominantly of coarse gravel. The largest of these streams, the Nueces River, has a sinuosity index of 1.3 and an average stream surface slope of 1.8 m/km in the study area. Stream discharge is variable and has ranged from no flow to more than 17,000 m³/s. Mean clast b-axis length for the ten largest clasts at thirteen sample sites ranged from 2.5 to 10.8 cm. Velocities of 2.7-4.4 m/s 1 m above the stream bed are required to transport these clasts. Stream velocities of these magnitudes occur about once in 8 years when discharge of the Nueces River exceeds 3300 m³/s. Mean grain size of Nueces River alluvium ranges from 1.2 to 3.4 cm. At a flow depth of 1 m, sediment of this size has a critical erosion velocity of 1.8-3 m/s. Velocities of this magnitude occur about once in two years when discharge exceeds 340 m³/s. Under these conditions flow is subcritical, with critical shear stresses on depositional surfaces ranging from 6.4 to 12.7 kg/m². Gravel clasts are imbricated and channel bed forms are predominantly transverse gravel bars with slip faces ranging up to 2 m high and wavelengths in excess of 100 m. Stratification includes graded planar crossbeds and horizontal beds. Lower lateral accretion face sediments are also predominantly transverse bars; upper lateral accretion face deposits occur as longitudinal gravel ridges deposited in the lee of vegetation and, less commonly, as chute bars. Near the upper limit of meander lobes where vegetation is heavy, mud and muddy sand occur as overbank deposits; in these deposits sedimentary structures other than desiccation cracks are rare. Sedimentary sequences in gravel meander lobe systems deposited by low sinuosity streams are graded or non-graded horizontal beds and planar cross-beds overlain by mud and muddy sand interbedded with horizontally bedded gravels. Sequences may be several metres thick, but probably do not exceed 8-10 m in thickness. These deposits in turn are overlain by overbank deposits of mud and muddy sand. Similar sedimentary sequences occur in the extensive Quaternary terraces that parallel the Nueces River.     

Muddy lateral accretion and low stream power in a sub-recent confined channel belt, Rhine-Meuse delta, central Netherlands

The Hennisdijk fluvial system in the central Rhine-Meuse delta is an abandoned Rhine distributary that was active on a wide floodplain from 3800 to 3000 years BP . Cross-sectional geometry, lithological characteristics and planform patterns of the channel-belt deposits indicate lateral migration of the Hennisdijk palaeochannel. Channel-belt deposits are around 10 m thick and 200–400 m wide. A gravelly facies near the base of the channel-belt deposits represents channel-lag and lower point-bar deposits. The axis of the channel belt is dominated by a sandy facies (medium and coarse sand), showing an overall fining upward trend with multiple cycles. This facies is interpreted as lower and middle point-bar deposits. The sandy facies is capped by a muddy facies, which is 1–2 m thick near the axis of the channel belt and thickens to 5–6 m along the margins. It laterally interfingers with the sandy facies that occurs near the channel-belt axis, but it has sharp, erosive outer contacts marking the edges of the channel belt. The muddy facies comprises inclined heterolithic stratification (IHS) (fine/medium sand–mud couplets) in its upper part. The relatively thin muddy facies with IHS that occurs near the channel-belt axis is interpreted as upper point-bar deposits with lateral accretion surfaces, formed under marine influence. Along the margins of the channel belt the muddy facies consists of thick, fairly homogeneous, successions of mud with variable sand content, and fine sand. Based on facies geometry and position, this part of the muddy facies is interpreted as counterpoint deposits, formed along the upstream limb of the concave bank of a channel bend. Counterpoint accretion seems to have been associated with the confined nature of the channel belt, which was the result of low stream power (4·5–7·8 W m⁻², based on reconstructions of palaeodischarge and channel slope) and cohesive bank material, i.e. clayey floodbasin deposits with intercalated peat beds occurring next to the channel belt. In the literature, counterpoint accretion is mostly reported from alluvial valleys, where meandering is confined by limited floodplain width, whereas muddy lateral accretion surfaces are commonly reported from much wider marine-influenced floodplains. The present study shows juxtaposition of both forms of muddy channel deposits in a low-energy, wide coastal plain setting, where preservation potential is considerable.     

Wavy lamination in a mixed sand and gravel foreshore facies of the Pleistocene Hosoya Sandstone, Aichi, central Japan

Although sandy foreshore facies are generally characterized by parallel lamination, wavy lamination is predominant in the mixed sand and gravel foreshore facies of the Pleistocene Hosoya Sandstone, which crops out along the Pacific coast of the Atsumi Peninsula, Aichi, central Japan. The foreshore facies consists of three sedimentary subfacies; interbeds of gravel and parallel laminated sand of the lower foreshore facies, parallel laminated fine to medium sand beds containing scattered pebbles and cobbles of the middle foreshore facies, and wavy laminated fine to medium sand beds containing scattered pebbles and cobbles of the upper foreshore facies. A lack of erosional surfaces in the middle foreshore facies indicates the continuous accumulation of sand in flat beds under upper plane bed flow. The wavy laminated sands of the upper foreshore facies exhibit erosional surfaces indicative of repeated deposition and erosion. The erosional surfaces are undulatory, with depressions (10 cm wide and 3 cm deep) that contain scattered pebbles and cobbles. These depressions reflect backwash erosion of sand around and below the pebbles and cobbles. Sand draping over the undulating erosional surfaces forms the wavy lamination. The wavy laminated sand with scattered pebbles and cobbles is a key facies of an upper foreshore or swash zone, and is a good sea-level marker.     

Sedimentology and tectonic implications of Cretaceous fan-delta conglomerates, Queen Charlotte Islands, Canada

The Honna Formation, of Coniacian age, consists of several hundred metres of polymictic clast-supported conglomerate associated with sandstone and mudstone. Five conglomerate facies are recognized: ungraded beds; inverse graded beds; normal graded beds; inverse-to-normal graded beds; and parallel-stratified beds. These facies are interpreted as the deposits of subaqueous cohesionless debris flows and/or high-density turbidity currents. The depositional environment was a deep-water, gravelly fan that draped a fault-controlled, basin-margin slope. The fan is inferred to have passed upslope directly into an alluvial fan (unpreserved); hence, the name fan delta can be applied to the overall depositional system. This type of fan delta, of which the Brae oilfield in the North Sea is an example, is defined here as a deep-water fan delta. The lack of a shelf is in marked contrast to other types of fan delta. Three facies associations are recognized in the Honna Formation: subaqueous proximal-fan conglomerates, distal-fan turbiditic sandstones, and pro-fan/interfan mudstones with thin sandy turbidites. The proximal fan is envisaged as an unchannelled gravel belt with a downslope length of at least 20 km; such a long subaqueous gravel belt lacks a known modern analogue. The distal fan was an unchannelled sandy extension of the proximal gravel belt. It is postulated that the Honna Formation accumulated in a foreland basin which migrated westwards from the Coast Mountains where the Wrangellia-Alexander terrane was colliding with North America. In this model, the Honna fan delta was sourced by a (west-verging) thrust sheet whose sole-thrust was the Sandspit Fault immediately to the east. Deep-water fan deltas appear to develop preferentially when eustatic sea-level is relatively high, so that the‘feeder’ alluvial fan is small, and gravelly throughout. In petroleum exploration and field development, care should be taken to distinguish deep-water fan deltas from base-of-slope (canyon-fed) submarine fans, because the two systems differ significantly in terms of coarse-sediment distribution.     

Sedimentary facies of the Nova Scotian upper and middle continental slope, offshore eastern Canada

A detailed survey of the upper and middle Nova Scotian continental slope at 42°50′N and 63°30′W indicates a complex morphology dominated by mass movements on various scales and an immature turbidity current channel. The range of sediment facies is diverse including hemipelagic and turbidite muds, turbidite sands and gravelly sandy muds of debris flow origin. Deformed units, interpreted as slump deposits are also observed. Several facies associations, related to discrete morphological environments, are recognized. Thick turbidite sand units with minor intervening mud beds are characteristic of the high-relief uppermost slope and channel margin. Thinner turbidite sands, deformed slump beds and various mud facies are associated with small-scale, hummocky mid-slope topography. Sand beds are more abundant in the depressions than on intervening hummocks indicating the preferred transport paths of small turbidity currents. At the lower end of the main turbidity current channel, frequent turbidite sand beds with relatively minor mud beds are deposited on a depositional lobe. In areas unaffected by mass movements, alternating bioturbated mud and sandy muds make up the core sequences. A local model of sedimentation is proposed for this area and illustrates that simple models of continental slope sedimentation only apply to a limited range of settings.     

Sedimentology of gravelly Lake Lahontan highstand shoreline deposits,Churchill Butte,Nevada, USA

Gravelly shoreline deposits of the latest Pleistocene highstand of Lake Lahontan occur in pristine depositional morphology, and are exposed in gravel pits along Churchill Butte in west-central Nevada. Four environments differentiated at this site are alluvial fan/colluvium, lakeshore barrier spit, lake lower-shoreface spit platform, and lake bottom. Lakeshore deposits abut, along erosional wave headcuts, either unsorted muddy to bouldery colluvium fringing Churchill Butte bedrock, or matrix-supported, cobbly and pebbly debris-flow deposits of the Silver Springs fan. The lakeshore barrier spit is dominated by granule pebble gravel concentrated by wave erosion of the colluvial and alluvial-fan facies. The lakeward side of the barrier consists of beachface deposits of well-sorted granules or pebbles in broad, planar beds 1–10 cm thick and sloping 10–15°. They interfinger downslope with thicker (10–25 cm) and less steep (5–10°) lakeward-dipping beds of fine to medium pebble gravel of the lake upper shoreface. Interstratified with the latter are 10–40-cm-thick sets of high-angle cross-beds that dip southward, alongshore. Higher-angle (15–20°), landward-dipping foresets of similar texture but poorer sorting comprise the proximal backshore on the landward side of the barrier. They were deposited during storm surges that overtopped the barrier berm. Gastropod-rich sand and mud, also deposited by storm-induced washover, are found landward of the gravel foresets in a 15-m-wide backshore pond. Algal stromatolites, ostracodes, and diatoms accumulated in this pond between storm events. The lake lower shoreface, extending from water depths of 2 to 8 m, consists of a southward-prograding spit platform built by longshore drift. The key component of this platform is large-scale sandy pebble gravel in 16° southward-dipping `Gilbert' foresets that grade at a water depth of about 6–7 m to 4°-dipping sandy toesets. A shift from bioturbated lower-shoreface sand and silt, to flat and laminated lake-bottom silt and mud, occurs between water depths of 10–40 m and over a shore-normal distance of ≥250 m. This lake-bottom mud facies, unlike the others, is areally expansive.     

Sedimentology and stratigraphy of a transgressive, muddy gravel beach: Waterside Beach, Bay of Fundy, Canada

Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.     

大港滩海埕北断阶区沙河街组三段、二段近岸水下扇沉积微相特征

大港滩海埕北断阶区沙河街组沙三段、沙二段砂体是由辫状水道控制的近岸水下扇。主要发育基质支撑砂砾岩相、颗粒支撑砂砾岩相、正递变层理砾岩相、含砾砂岩相、逆递变层理砾岩相、含砾砂岩相、泥质支撑砂岩相和粉砂岩相,粒度粗是其主要特征;水平层理、块状层理、平行层理、交错层理、波状层理、包卷层理和变形层理十分发育;砂球、重荷模、砂岩脉和冲刷面等沉积构造也十分发育：电阻率曲线呈正韵律,曲线由高幅至中幅呈钟形及箱形,与不同岩性和不同沉积相具良好对应关系。通过对区内各井的岩性组合观察,结合各砂层组的沉积特征及其相应的测井相标志将研究区近岸水下扇划分为2个亚相和5个微相：扇中(包括辫状水道、辫状水道间和扇中前缘)和扇端亚相(扇端泥、扇端席状砂)。其中扇中辫状水道为主要储集层。     

The Hunghae Formation, SE Korea: Miocene debris aprons in a back-arc intraslope basin

ABSTRACT During early to middle Miocene times a sudden opening of the Ulleung (Tsushima) back-arc basin in the East Sea (Sea of Japan) led to the development of intraslope basins along the rifted southwestern margin (southeast Korea). Abrupt subsidence resulted in the deposition of the 200 m thick Hunghae Formation (middle Miocene), a sand/mudstone sequence that can be divided into five facies. Facies I (sand and mudstone couplet) and II (coarse sand) are turbiditic in origin, as evidenced by massive, graded, crudely-layered and parallel-laminated sand beds. Facies III (homogeneous mudstone) is characterized by various lignite and plant fragments, clastic and biogenic grains that are randomly oriented, suggestive of hemipelagic deposition. Facies IV (chaotic deposit) is characterized by the disruption of beds, the presence of isolated siltstone blocks (or balls) and large clasts in the muddy matrix, indicative of retrogressive rockfall and slide/slump. Facies V (conglomerate) is of debris flow origin, as evidenced by clast- and matrix-supported features, floating large clasts and absence of traction structures. Individual facies are organized into two types of facies association: (1) homogeneous mudstone (facies III) associated randomly with the rest (facies I, II, IV and V), indicative of hemipelagic and episodic sediment-gravity flow processes, respectively; (2) conglomerate (facies V), coarse sand (facies II) and sand/mudstone couplet (facies I), representing the flow transformation from debris flow to high- and low-concentration turbidity currents. These facies associations are similar in many respects to modern and ancient debris (or slope) aprons found elsewhere. Numerous isolated slide/slump blocks, wedged conglomerates with armoured mudstone balls, discontinuous lignite-containing sand/mudstone beds, chaotic structure and growth faults suggest that the deposition occurred on a steep slope (intraslope basin) off coalescing fan-deltas, mainly by unchannellized sediment-gravity flows. Ancient deposits with irregular facies sequences can be viewed as debris-apron systems, which provide alternatives to submarine-fan models in many clastic basins with a line rather than point source.     

Facies analysis of a Toarcian–Bajocian shallow marine/coastal succession (Bardas Blancas Formation) in northern Neuquén Basin,Mendoza province,Argentina

Strata of the Bardas Blancas Formation (lower Toarcian–lower Bajocian) are exposed in northern Neuquén Basin. Five sections have been studied in this work. Shoreface/delta front to offshore deposits predominate in four of the sections studied exhibiting a high abundance of hummocky cross-stratified, horizontally bedded and massive sandstones, as well as massive and laminated mudstones. Shell beds and trace fossils of the mixed Skolithos-Cruziana ichnofacies appear in sandstone beds, being related with storm event deposition. Gravel deposits are frequent in only one of these sections, with planar cross-stratified, normal graded and massive orthoconglomerates characterizing fan deltas interstratified with shoreface facies. A fifth outcrop exhibiting planar cross-stratified orthoconglomerates, pebbly sandstones with low-angle stratification and laminated mudstones have been interpreted as fluvial channel deposits and overbank facies. The analysis of the vertical distribution of facies and the recognition of stratigraphic surfaces in two sections in Río Potimalal area let recognized four transgressive–regressive sequences. Forced regressive events are recognized in the regressive intervals. Comparison of vertical distribution of facies also shows differences in thickness in the lower interval among the sections studied. This would be related to variations in accommodation space by previous half-graben structures. The succession shows a retrogradational arrangement of facies related with a widespread transgressive period. Lateral variation of facies let recognize the deepening of the basin through the southwest.     

废黄河三角洲典型钻孔XJ01全新世地层与微体古生物记录

钻孔XJ01位于废黄河三角洲滨淮镇附近,钻孔中上更新统顶部与全新统有4个14C测年数据控制,该孔全新统岩性特征自下而上为潮间带含贝壳砾质砂层、浅海相淤泥质黏土层、三角洲前缘相深灰色粉砂、三角洲平原相黏土质粉砂及粉砂质黏土。全新统微体古生物分析结果详细地反映了废黄河三角洲典型区域各时期的沉积环境,其中,全新统下部见大量的有孔虫与海相介形虫,中部微体古生物略少,上部地层中海相介形虫增多。整个全新世微体生物组合揭示了一个河口变化的水动力控制沉积环境。     

广北地区沙四段滨浅湖微相的垂向演化及其地震相解释

笔者通过关键井的岩性,测井相和地震相的研究,认为东营凹陷广北地区的下第三系沙四段为滨湖亚相的砂坝,砂泥混合滩,泥滩等微相以及浅湖亚相的远砂坝,席状砂,浅湖泥等微相构成的滨湖沉积体系,由老到新的垂向上沉积演化为浅湖亚相（ES^64）－滨湖亚相（ES^34,ES^44,ES^54)－浅湖亚相（ES^14,ES^24),反映出水进－水退－水进的沉积旋回,通过地震剖面的对比和地震相的解释,建立和各沉积微相与地震相对应关系,探索不同沉积微相砂体中油气的富集规律。     

Alluvial deposits of a mud-dominated stream: the Red River, Manitoba, Canada

Abstract The Red River, Manitoba, is a mud‐dominated, meandering stream that occupies a shallow valley eroded into a clay plain. The valley‐bottom alluvium is the product of incision and lateral migration of river meanders. As revealed by a transect of five boreholes located across the floodplain at each of two successive river meanders, the alluvial deposits range from about 15 to 22 m thick and are composed primarily of silt. Sedimentary structures in the cores are weakly defined and consist mostly of beds of massive silt, thick (>0·4 m) massive silt and disturbed silt. Interlaminated sand and silt, and sand beds form relatively minor deposits, principally within the lower half of the alluvium, and thin beds of medium‐coarse sand and pea gravel can be present locally within the lower metre of the alluvium. The alluvium is interpreted to consist of overbank deposits from 0 to 2–3 m depth, oblique accretion deposits from 2–3 to 8–12 m depth and oblique accretion and/or channel deposits from 8–12 m to the base of the sequence. The massive bedding within the oblique accretion deposits is interpreted to represent the remnants of couplet deposits that were initially composed of interbedded, muddy silt and sand‐sized silt aggregates, as is consistent with the contemporary bank sedimentation. The post‐depositional disintegration and/or compaction of the aggregates has caused the loss of the sand‐sized texture. The disturbed silt beds are interpreted as slump structures caused by large‐scale rotational failures along the convex banks. Overall, the Red River represents a portion of a continuum of muddy, fine‐grained streams; where the alluvium lacks a distinct coarse unit, oblique accretion deposits form a majority of the floodplain, and large‐scale slump features are present.     

Cyclic sedimentation produced by fluctuations in meltwater discharge, tides and marine productivity in an Alaskan fjord

Glacimarine sediment deposited in the fjord adjacent to Muir Glacier in south-eastern Alaska consists of rhythmically laminated muds, stratified sandy mud, sand and gravelly mud facies. Cyclicity is recorded by gravelly mud facies deposited during winter by ice-rafting, black mud laminae formed by spring plankton blooms and variations in tidal rhythmite thickness and texture produced by the interaction of meltwater discharges and tidal currents in the macrotidal fjord. Regular cyclicity in laminae thickness is tested statistically by Fourier transform and can be attributed to a lunar tidal cycle control in the five cores collected up to 6 km from the sediment source. Cores close to the source can have additional laminae as a result of discharge fluctuations, and distal cores may lack full cycles because of variability in the plume path and attenuation with distance. Cyclic variations in sediment texture are recorded in magnetic susceptibility (MS) profiles of the cores. High MS values are produced by turbidite sand beds or by stratified sandy mud deposited by overflow plumes during peak summer meltwater discharge. Low values reflect muddy intervals deposited during periods of low meltwater discharge, such as during autumn and winter. Sediment accumulation rates measured by ²¹⁰Pb dating range from 82 cm year^–1, 2 km from the sediment source at the head of the fjord, to 16 cm year^–1, 6 km away. These rates are within the same range as average sediment accumulation rates determined from cyclic seasonal markers within the cores. These data show that, with careful documentation, annual cycles of glacimarine sediment accumulation can be detected within marine cores. Cores collected from the distal portion of the basin were deposited during the transition of Muir Glacier from a tidewater terminus ending in deep water to a terrestrial glacier with an ice-contact delta deposited in front of the terminus. This transition is recorded by a coarsening-upward sedimentary sequence formed by turbidite sands originating from the prograding delta above fine-grained, laminated basin fill deposited by turbid overflow plumes.     

Facies relationships in Pleistocene outwash gravels, southern Ontario: a model for bar growth in braided rivers

Facies relationships in Pleistocene braided outwash deposits in southern Ontario demonstrate the presence of a large braid bar with adjacent side channel. The core of the bar is up to 6 m high, and consists of crudely horizontally stratified gravels. Downstream from the core is the bar front facies, consisting of large gravelly foresets up to 4 m high, rounded off in many places by reactivation surfaces. Upstream from the core is the bar stoss side facies consisting of several sets (individually up to 35 cm thick) of tabular cross-bedding, arranged in coarsening-upward sequences. The stoss side—core—bar front relationships are continuously exposed in one 400 m long quarry face which is cut almost parallel to the palaeoflow direction. A transverse quarry face shows the side channel facies, which consists of trough cross-bedded sands. Gravel layers can be seen to finger from the main gravelly bar into the sandy side channel, but they do not reach the base of the channel. This surprising relationship indicates that gravel moved only in the topographically higher parts of the system. After deposition in the side channel, and growth upstream and downstream from the bar core, the entire system aggraded. Crudely horizontally stratified, and imbricated gravel sheets were laid down as a bar top facies. Grain size analyses indicate strongly bimodal distributions, implying that much of the sand in the spaces between pebbles and boulders filtered in after the gravel had been deposited. This interpretation is strengthened by velocity calculations—mean velocities in excess of 300 cm/s would be needed to roll the gravel as bed load, but at such a velocity, a large amount of sand would be transported entirely in suspension. In a final section of the paper, our results are combined with other work on braided systems in an attempt to formulate a more general facies model.