鄂尔多斯盆地陇东地区延长组长7段沉积微相及沉积演化特征

利用大量的岩芯、露头剖面观察和测井资料,在总结分析重力流沉积理论的基础上,系统研究了鄂尔多斯盆地陇东地区延长组长7段重力流沉积特征及沉积模式。研究认为陇东长7段主要发育砂质碎屑流和浊流沉积,局部发育滑动、滑塌岩;受多物源、湖盆底形、湖岸线迁移等因素的影响,研究区沉积砂体并未呈现出明显的扇形,受西南陡窄斜坡控制的泾川—华池一带砂体呈条带状分布,发育水道型重力流沉积,沉积微相可分为限制型水道、非限制型水道、侧翼溢漫、水道间、前缘朵体和深湖泥6种,在湖盆底庆城—华池一带多期水道交汇叠置,形成了大面积的连片砂体;受南部物源控制的宁县—合水地区,由于斜坡坡度相对较缓、物源供给充足,形成了以滑塌为主的斜坡沉积模式,根据滑动的距离可分为近源沉积和远源沉积2个亚相,沉积微相可分不规则滑塌体、砂质碎屑流舌状体、朵叶状浊流岩和深湖泥4种,研究区南部主要以砂质碎屑流舌状体为主,在斜坡处多期舌状体纵横叠置,形成了多期薄、厚砂体互层的连片砂体。通过对陇东长7段沉积模式的建立和沉积微相的识别与划分,为研究区砂体展布的精细刻画提供了重要指导,也为该区致密油水平井规模建产提供了依据。     

Of sand and mud: Sedimentological criteria for identifying the turbidity maximum zone in a tidally influenced river

The thickness and lateral distribution of sand and mud beds and bedsets on channel bars from the tidally influenced Fraser River, British Columbia, Canada, are quantitatively assessed. Fifty‐six vibracores totalling ca 114 m of vertical section are used to tabulate bed thicknesses. Statistical calculations are undertaken for nine channel bars ranging from the freshwater and tidal zone, to the sustained brackish water and tidal zone. The data reveal that thickness trends can be organized into three groups that broadly correspond to time‐averaged hydrodynamic and salinity conditions in the various distributary channels. Thick sand beds (up to 30 cm) and thin mud beds (up to 5 cm) characterize the freshwater tidal zone. The tidal and freshwater to brackish‐water transition zone comprises thin sands (up to 10 cm) and thicker muds (up to 19 cm), and the sustained brackish water tidal zone consists of thin muds (up to 6 cm) with relatively thicker sands (up to 25 cm). The results suggest that the locus of mud deposition occurs in the tidal freshwater to brackish‐water zone, probably reflecting mud flocculation and deposition at the turbidity maximum. Landward of the turbidity maximum, mud deposition is linked to tidal influence (tidal backwater effect and reverse eddy currents on channel margins) as mud beds thin in the landward direction. These results support the hypothesis that mud deposition is greatest at the turbidity maximum and decreases in both the seaward and landward direction. This study also showcases that mud‐bed thicknesses are greatest towards the turbidity maximum and thin in both the landward and seaward direction. In the rock record, the apex of mud deposition probably marks the position of the palaeo‐turbidity maximum.     

The character of seismo-turbidites in the S-1 sapropel, Zakinthos and Strofadhes basins, Greece

The early Holocene S-1 sapropelic sequence in the northwest Hellenic Trench has been studied in six piston cores from the Zakinthos and Strofadhes basins. The S-1 sequence, 0.7-3.5 m thick, consists principally of silt to mud turbidites, with rare, thick, disorganized, sandy turbidites. These lithofacies are described and compared with fine-grained turbidites from the literature. Petrographical data, including the abundance of organic carbon and planktonic microfossils, indicate that the principal source of sediment to the turbidites was from the continental slope. On the basis of composition and texture, five turbidite units can be correlated between the two basins. These basins are fed by separate but adjacent drainage systems. The apparently synchronous occurrence of turbidites in the two drainage systems suggests that the turbidity currents were seismically triggered. Some of the turbidites show poorly organized beds which may reflect the slump origin and the short (30 km) distances of travel. Turbidites were deposited more frequently in the S-1 sapropelic interval than in the over- and underlying sediments. Application of slope stability analysis shows that on the 8° slopes above the basins, a 10-cm-thick sapropel would have a factor of safety of about 2, and would fail with earthquake accelerations in excess of 0.08 g. The frequency of earthquakes likely to produce such accelerations is similar to the observed frequency of turbidites. The low strength of the sapropelic sediment makes it particularly susceptible to such failure. Similar thin-skinned slumping may be an important process for the initiation of turbidity currents in other environments where there are steep slopes or high sedimentation rates.     

Facies of slurry-flow deposits, Britannia Formation (Lower Cretaceous), North Sea: implications for flow evolution and deposit geometry

ABSTRACT Mud‐rich sandstone beds in the Lower Cretaceous Britannia Formation, UK North Sea, were deposited by sediment flows transitional between debris flows and turbidity currents, termed slurry flows. Much of the mud in these flows was transported as sand‐ and silt‐sized grains that were approximately hydraulically equivalent to suspended quartz and feldspar. In the eastern Britannia Field, individual slurry beds are continuous over long distances, and abundant core makes it possible to document facies changes across the field. Most beds display regular areal grain‐size changes. In this study, fining trends, especially in the size of the largest grains, are used to estimate palaeoflow and palaeoslope directions. In the middle part of the Britannia Formation, stratigraphic zones 40 and 45, slurry flows moved from south‐west and south towards the north‐east and north. Most zone 45 beds lens out before reaching the northern edge of the field, apparently by wedging out against the northern basin slope. Zone 40 and 45 beds show downflow facies transitions from low‐mud‐content, dish‐structured and wispy‐laminated sandstone to high‐mud‐content banded units. In zone 50, at the top of the formation, flows moved from north to south or north‐west to south‐east, and their deposits show transitions from proximal mud‐rich banded and mixed slurried beds to more distal lower‐mud‐content banded and wispy‐laminated units. The contrasting facies trends in zones 40 and 45 and zone 50 may reflect differing grain‐size relationships between quartz and feldspar grains and mud particles in the depositing flows. In zones 40 and 45, quartz grains average 0·30–0·32 mm in diameter, ≈ 0·10 mm coarser than in zone 50. The medium‐grained quartz in zones 40 and 45 flows may have been slightly coarser than the associated mud grains, resulting in the preferential deposition of quartz in proximal areas and downslope enrichment of the flows in mud. In zone 50 flows, mud was probably slightly coarser than the associated fine‐grained quartz, resulting in early mud sedimentation and enrichment of the distal flows in fine‐grained quartz and feldspar. Mud particles in all flows may have had an effective grain size of ≈ 0·25 mm. Both mud content and suspended‐load fallout rate played key roles in the sedimentation of Britannia slurry flows and structuring of the resulting deposits. During deposition of zones 40 and 45, the area of the eastern Britannia Field in block 16/26 may have been a locally enclosed subbasin within which the depositing slurry flows were locally ponded. Slurry beds in the eastern Britannia Field are ‘lumpy’ sheet‐like bodies that show facies changes but little additional complexity. There is no thin‐bedded facies that might represent waning flows analogous to low‐density turbidity currents. The dominance of laminar, cohesion‐dominated shear layers during sedimentation prevented most bed erosion, and the deposystem lacked channel, levee and overbank facies that commonly make up turbidity current‐dominated systems. Britannia slurry flows, although turbulent and capable of size‐fractionating even fine‐grained sediments, left sand bodies with geometries and facies more like those deposited by poorly differentiated laminar debris flows.     

西秦岭直合隆地区三叠系深水水道沉积模式分析

西秦岭三叠系地层主要由深水沉积物组成。选取西秦岭直合隆地区出露较好的三组剖面进行研究,按重力流类型及静水条件下所发生的沉积现象,总结出六种岩石相类型,即滑塌岩相（F1）、碎屑流相（F2）、超高密度流相（F3）、高密度浊流相（F4）、低密度浊流相（F5）、深海泥岩相（F6）。通过对三处剖面的横向追踪对比,结合不同沉积环境下表现出特定的岩石相占比及砂体堆叠样式,共识别出限制性水道、弱限制性水道及水道天然堤三类沉积单元。限制性水道中砂体叠置关系复杂,以超高密度流相占主导地位,次为碎屑流相;弱限制性水道中砂体叠置较规整,以超高密度流相占主导地位,次为低密度浊流相;而水道天然堤表现为砂泥互层（总厚度约15 m）,主要为低密度浊流相和深海泥岩相。最后建立了研究区内深水水道沉积演化阶段模式图——早期限制性环境下水道较顺直,水道较窄,砂体叠置关系复杂;中期限制性环境相对早期有所减弱,水道弯曲度增大,水道变宽,出现溢岸沉积,砂体叠置关系复杂;晚期为弱限制性环境,弯曲水道两侧发育天然堤,砂体叠置规整。本次研究利用野外露头建立的深水水道沉积演化模式,在一定程度上还原其相关的重力流演化过程及发育期次,对全球其他类似研究具有一定的参考意义。     

Late Quaternary mass movement on the lower continental rise and abyssal plain off Western Sahara

The late Quaternary development of part of the lower continental rise off Western Sahara has been determined from an investigation of short (< 2 m) gravity cores collected from a deep-sea channel, the interchannel areas and an abyssal hill, between 30 and 33°N. Stratigraphic analysis is based on systematic variations in abundances of particular coccolith species and pelagic sediment types, referenced to the oxygen isotope time-scale. During the last 73 000 years deposition in the channel has included volcaniclastic sand/silt turbidites and minor marl turbidites as well as pelagic sediments. The interchannel area has fewer turbidites, and the sands present were probably deposited from turbidity currents which spilt over the channel sides. The last‘event’ to give rise to sands in the channel and interchannel area occurred about 45 000 years ago. Although the channel has been inactive as an area of turbidity current deposition for the last 20 000 years, sands were deposited elsewhere on the lower rise, indicating that turbidity current transport routes have varied in time. Turbidity current deposition on the abyssal plain and low-lying continental rise appears to be related to distinct sliding events involving transport of material from various sources. Thin marl turbidites are interbedded with pelagic sediments in the area of sediment drape. There is a strong correlation between these and the thick marl turbidites on the abyssal plain, suggesting that the same turbidity current‘events’, occurring about once every 25 000 years, gave rise to both sets of deposits. The thinner units probably represent deposition from the outer parts or tails of the large turbidity flows. The turbidites occur at glacial/interglacial transitions, suggesting that the slides that created them were triggered by mechanisms related to climatic change. Several volcaniclastic sand/silt units within the channel and in interchannel areas occupy mid-stage stratigraphic positions, perhaps indicating a different triggering mechanism for slides around volcanic islands. A debris flow deposit (debrite), between 30°N, 21°W and 31°N, 24°W, is related to the Saharan Sediment Slide, a major mass movement feature on the continental slope over 1000 km to the southeast. Stratigraphic correlations indicate that this slide produced a large turbidity current as well as a debris flow.     

Depositional environments of some Pleistocene coastal terrace deposits,southwestern Oregon—case history of a progradational beach and dune sequence

Pleistocene coastal terrace deposits exposed in sea cliffs near Gold Beach, Oregon can be divided into four stratigraphic units: a basal gravelly unit and three overlying sandy units, each with mud beds, a paleosol, or the modern soil in its uppermost part. The gravelly unit consists of gravel and sand in its lower part, sand, in part pebbly or cobbly, in its middle part, and mud and sand in its upper part. Black sand and transported pieces of wood are common in the middle part of the unit, and wood is common in the mud. This unit is interpreted as a progradational deposit including environments ranging from lower forebeach at the base to backbeach flats and streams at the top.The main sandy parts of the sandy units are made up of a crossbedded sand facies, the dominant structure in which is medium-scale crossbedding, and an irregularly bedded sand facies, which is locally pebbly and is dominated by scour-and-fill structures. Deciding between shallow marine and eolian interpretations of the sandy units proved exceptionally difficult until modern analogues were found in the fine details of the internal structures. Largely on the basis of such structural details, the crossbedded sand facies is interpreted as the product of small eolian dunes, and the irregularly bedded sand facies is interpreted as deposits of interdune ephemeral streams, ephemeral ponds, and wet to dry subaerial flats. The mud beds and paleosols at the tops of the sandy units represent times of temporary stabilization of the dune field.     

Turbidite depositional patterns and flow characteristics, Navy Submarine Fan, California Borderland

The late Pleistocene and Holocene stratigraphy of Navy Fan is mapped in detail from more than 100 cores. Thirteen ¹⁴C dates of plant detritus and of organic-rich mud beds show that a marked change in sediment supply from sandy to muddy turbidites occurred between 9000 and 12,000 years ago. They also confirm the correlation of several individual depositional units. The sediment dispersal pattern is primarily controlled by basin configuration and fan morphology, particularly the geometry of distributary channels, which show abrupt 60° bends related to the Pleistocene history of lobe progradation. The Holocene turbidity currents are depositing on, and modifying only slightly, a relict Pleistocene morphology. The uppermost turbidite is a thin sand to mud bed on the upper-fan valley levées and on parts of the mid-fan. Most of its sediment volume is in a mud bed on the lower fan and basin plain downslope from a sharp bend in the mid-fan distributary system. Little sediment occurs farther downstream within this distributary system. It appears that most of the turbidity current overtopped the levée at the channel bend, a process referred to as flow stripping. The muddy upper part of the flow continued straight down to the basin plain. The residual more sandy base of the flow in the distributary channel was not thick enough to maintain itself as gradient decreased and the channel opened out on to the mid-fan lobe. Flow stripping may occur in any turbidity current that is thick relative to channel depth and that flows in a channel with sharp bends. Where thick sandy currents are stripped, levée and mid-fan erosion may occur, but the residual current in the channel will lose much of its power and deposit rapidly. In thick muddy currents, progressive overflow of mud will cause less declaration of the residual channelised current. Thus both size and sand-to-mud ratio of turbidity currents feeding a fan are important factors controlling morphologic features and depositional areas on fans. The size-frequency variation for different types of turbidity currents is estimated from the literature and related to the evolution of fan morphology.     

断陷湖盆深水重力流水道的识别标志及沉积模式——以歧口凹陷歧南斜坡沙一段为例

以歧口凹陷歧南斜坡沙一段的深水厚层砂岩为研究对象,运用地震沉积学基本理论和方法,通过古地貌分析约束物源方向,结合岩心观测描述确定沉积相类型,应用地层切片、反演与三维可视化技术确定空间形态。结果表明:该区广泛发育的深水厚层砂岩为重力流水道沉积,包括滑塌岩、砂质碎屑流砂体与浊积岩3种类型重力流沉积的组合;顺北东向展布的断槽内呈大型条带状展布,可划分为水道中心微相、水道边缘微相和水下漫溢微相;岩心中可识别出7种岩相类型。在沉积特征分析的基础上,建立了发育于斜坡且由顺源断层控制的重力流沉积模式,分析了歧南斜坡重力流水道的成因及其油气成藏特征。研究认为重力流水道是该区一类重要的储集体,具有良好的成藏条件,该成果扩大了歧口凹陷油气勘探领域。     

Textural trends in turbidites and slurry beds from the Oligocene flysch of the East Carpathians, Romania

Deep‐water sandstone beds of the Oligocene Fusaru Sandstone and Lower Dysodilic Shale, exposed in the Buz?u Valley area of the East Carpathian flysch belt, Romania, can be described in terms of the standard turbidite divisions. In addition, mud‐rich sand layers are common, both as parts of otherwise ‘normal’ sequences of turbidite divisions and as individual event beds. Eleven units, interpreted as the deposits of individual flows, were densely sampled, and 87 thin sections were point counted for grain size and mud content. S₃/T_a divisions, which form the bulk of most sedimentation units, have low internal textural variability but show subtle vertical trends in grain size. Most commonly, coarse‐tail normal grading is associated with fine‐tail inverse grading. The mean grain size can show inverse grading, normal grading or a lack of grading, but sorting tends to improve upward in most beds. Fine‐tail inverse grading is interpreted as resulting from a decreasing effectiveness of trapping of fines during rapid deposition from a turbidity current as the initially high suspended‐load fallout rate declines. If this effect is strong enough, the mean grain size can show subtle inverse grading as well. Thus, thick inversely graded intervals in deep‐water sands lacking traction structures do not necessarily imply waxing flow velocities. If the suspended‐load fallout rate drops to zero after the deposition of the coarse grain‐size populations, the remaining finer grained flow bypasses and may rework the top of the S₃ division, forming well‐sorted, coarser grained, current‐structured T_t units. Alternatively, the suspended‐load fallout rate may remain high enough to prevent segregation of fines, leading to the deposition of significant amounts of mud along with the sand. Mud content of the sandstones is bimodal: either 3–13% or more than 20%. Two types of mud‐rich sandstones were observed. Coarser grained mud‐rich sandstones occur towards the upper parts of S₃/T_a divisions. These units were deposited as a result of enhanced trapping of mud particles in the rapidly deposited sediment. Finer grained mud‐rich units are interbedded with ripple‐laminated very fine‐grained sandy T_c divisions. During deposition of these units, mud floccules were hydraulically equivalent to the very fine sand‐ and silt‐sized sediment. The mud‐rich sandstones were probably deposited by flows that became transitional between turbidity currents and debris flows during their late‐stage evolution.     

Outcrop-scale acoustic facies analysis and latest Quaternary development of Hueneme and Dume submarine fans, offshore California

The uppermost Quaternary deposits of the Hueneme and Dume submarine fans in the Santa Monica Basin have been investigated using a closed-spaced grid of boomer seismic-reflection profiles, which give vertical resolution of a few tens of centimetres with acoustic penetration to 50 m. Acoustic facies integrated with geometry define six architectural elements, some with discrete subelements that are of a scale that can be recognized in outcrops of ancient turbidite systems. In the Santa Monica Basin, the relationship of these elements to fan morphology, stratigraphy and sediment source is precisely known.
The width of upper Hueneme fan valley has been reduced from 5 km since the last glacial maximum to 1 km at present by construction of laterally confined sandy levees within the main valley. The middle fan comprises three main subelements: thick sand deposits at the termination of the fan valley, low-gradient sandy lobes typically 5 km long and < 10 m thick, and scoured lobes formed of alternating sand and mud beds with many erosional depressions. The site of thickest lobe sediment accumulation shifts through time, with each sand bed deposited in a previous bathymetric low (i.e. compensation cycles). The lower fan and basin plain consists of sheet-like alternations of sand and mud with shallow channels and lenses.
Variations in the rate of late Quaternary sea level rise initiated changes in sediment facies distribution. At lowstand, and during the approximately 11 ka stillstand in sea level, the Hueneme Fan was fed largely by hyperpycnal flow from the Santa Clara River delta, depositing high sediment waves on the right hand levee and thick sandy lobes on the middle fan. At highstand of sea level, most turbidity currents were generated by failure of silty prodelta muds. In contrast, the smaller Dume Fan was apparently always fed from littoral drift of sand through a single-canyon point source.     

Marine geology of Port Phillip,Victoria

The marine geology of Port Phillip is described in detail, based on data from seismic profiling, vibrocoring and grab sampling. Three major unconsolidated facies can be distinguished: sands and muddy sands peripheral to the present coastline, muds covering the major central region, and channel fills of muds and sands. The first two facies units result from an increase in wave sorting towards the coast, reworking of Tertiary and Quaternary sandstone outcrops around the coast, and a dominant mud supply from river sources into the central area. The distribution and thicknesses of the unconsolidated facies have been augmented by a shallow‐seismic program that reveals the thicknesses of the modern sediments overlying an older surface comprised of consolidated clays and sandy clays of Pleistocene or older age. In central Port Phillip, muds and sands up to 27 m‐thick have infilled Pleistocene channels cut into underlying consolidated units. Sediments immediately above the channel bases show characteristic seismic patterns of fluvial deposition. The presence of peat deposits together with gas phenomena in the water column suggest organic breakdown of channel‐fill deposits is releasing methane into the bay waters. Outside the channel areas, carbon‐14 dating indicates that the unconsolidated sediments largely post‐date the last glaciation sea‐level rise (<6500 a BP), with an early Holocene period of rapid deposition, similar to other Australian estuaries. Stratigraphic and depositional considerations suggest that the undated channel‐fill sequences correlate with the formation of cemented quartz‐carbonate aeolianite and barrier sands on the Nepean Peninsula at the southern end of Port Phillip. Previous thermoluminescence dating of the aeolianites suggests that channel‐fill sequences B, C and D may have been deposited as fluvial and estuarine infills over the period between 57 and 8 ka. The eroded surface on the underlying consolidated sediments is probably the same 118 ka age as a disconformity within the Nepean aeolianites. Further estuarine and aeolianite facies extend below the disconformity to 60 m below sea‐level, and may extend the Quaternary depositional record to ca 810 ka. Pliocene and older Tertiary units progressively subcrop below the Quaternary northwards up the bay.     

鄂尔多斯盆地南部三叠系延长组深水重力流沉积特征及其石油地质意义*

通过大量岩心观察、钻测井资料分析及野外露头观察,对鄂尔多斯盆地南部延长组长6—长7深水重力流沉积特征、触发机制、沉积过程、沉积模式及石油地质意义进行了系统分析。研究结果表明:研究区共存在滑动岩体、滑塌沉积、砂质碎屑流沉积、浊流沉积及泥质碎屑流沉积5种类型的重力流沉积物,各类型的沉积物特征明显。不同类型重力流沉积物垂向组合可分为5类,研究区重力流的形成过程可分为5个阶段:三角洲前缘沉积阶段、滑动阶段、滑塌变形阶段、砂质碎屑流及泥质碎屑流形成阶段以及浊流形成阶段。滑动、滑塌砂体多呈孤立透镜体状,砂质碎屑流砂体多以扇沟道的形式展现出来,浊流砂体多分布在扇沟道的前端或侧翼,呈席状砂展布。深水重力流砂体垂向叠置厚度大,可形成规模大的油藏,大大扩展了深湖的勘探范围。研究区长6、长7油层组砂质碎屑流砂体储集层物性较好,含油性好,是重点勘探层位。     

Cyclic sedimentation produced by fluctuations in meltwater discharge, tides and marine productivity in an Alaskan fjord

Glacimarine sediment deposited in the fjord adjacent to Muir Glacier in south-eastern Alaska consists of rhythmically laminated muds, stratified sandy mud, sand and gravelly mud facies. Cyclicity is recorded by gravelly mud facies deposited during winter by ice-rafting, black mud laminae formed by spring plankton blooms and variations in tidal rhythmite thickness and texture produced by the interaction of meltwater discharges and tidal currents in the macrotidal fjord. Regular cyclicity in laminae thickness is tested statistically by Fourier transform and can be attributed to a lunar tidal cycle control in the five cores collected up to 6 km from the sediment source. Cores close to the source can have additional laminae as a result of discharge fluctuations, and distal cores may lack full cycles because of variability in the plume path and attenuation with distance. Cyclic variations in sediment texture are recorded in magnetic susceptibility (MS) profiles of the cores. High MS values are produced by turbidite sand beds or by stratified sandy mud deposited by overflow plumes during peak summer meltwater discharge. Low values reflect muddy intervals deposited during periods of low meltwater discharge, such as during autumn and winter. Sediment accumulation rates measured by ²¹⁰Pb dating range from 82 cm year^–1, 2 km from the sediment source at the head of the fjord, to 16 cm year^–1, 6 km away. These rates are within the same range as average sediment accumulation rates determined from cyclic seasonal markers within the cores. These data show that, with careful documentation, annual cycles of glacimarine sediment accumulation can be detected within marine cores. Cores collected from the distal portion of the basin were deposited during the transition of Muir Glacier from a tidewater terminus ending in deep water to a terrestrial glacier with an ice-contact delta deposited in front of the terminus. This transition is recorded by a coarsening-upward sedimentary sequence formed by turbidite sands originating from the prograding delta above fine-grained, laminated basin fill deposited by turbid overflow plumes.     

Origin of fine-grained carbonate and siliciclastic sediments in an Early Palaeozoic slope sequence, Cow Head Group, western Newfoundland

The Cow Head Group is an Early Palaeozoic base-of-slope sediment apron composed of carbonate and shale. Whereas coarse-grained conglomerate and calcarenite are readily interpreted as debris-flow and turbidite deposits, calcilutite (lime mudstone), calcisiltite, and shale combine to form three distinct lithofacies whose present attributes are a function of both sedimentation and early diagenesis. Shale is the most common lithology. Black, green, and red shale colour variations reflect the abundance of organic matter in the source area and oxygenation conditions of the sea bottom. In black and green shale, millimetre- to centimetre-thick, alternating dark and light laminations represent terrigenous mud turbidites and hemipelagites, respectively. The calcisiltite/shale facies is uncommon and is composed of numerous graded carbonate-shale sequences (GCSS) deposited from waning carbonate turbidites and fall-out of terrigenous muds. Some of the characteristics of ribbon and parted lime mudstones in the calcilutite/shale facies can be explained by deposition of carbonate mud from dilute turbidity currents or hemipelagic settling. Other features are diagenetic in origin. The lack of micrite in GCSS and in the interbedded shales of the calcilutite/shale facies is interpreted to reflect early dissolution of the finer carbonate from these sediments. This remobilized carbonate was precipitated locally to: lithify lime mudstone turbidites or hemipelagites; form diagenetic lime mudstone beds and nodules; cement calcisiltites; and form dolomite. Many of the calcisiltites and calcilutites were, therefore, carbonate enriched at the expense of adjacent argillaceous sediments. These attributes characterize not only fine-grained sediments of the Cow Head Group but many other Early Palaeozoic slope carbonates as well, suggesting that the model proposed here for depositionl diagenesis has wider application.     

南海北部陆坡区新近系沉积体系特征与天然气水合物分布的关系

南海北部陆坡区新生界含有丰富的油气资源和各种矿产资源，对其沉积体系的分析可以指导资源勘探和开发。笔者在对南海北部陆坡区的西沙海槽和东沙海域的地震剖面解释与研究的基础上，依据“外部形态＋内部属性”的分类原则，在中新世以来的沉积层中共识别出8种典型的地震相：席状平行相、席状波形相、席状空白相、席状杂乱相、席状前积相、帚状前积相、透镜状前积相和丘状杂乱相。结合地震相分析，在南海北部陆坡区识别出6种典型的沉积体系：三角洲体系、等深流、低位扇、滑塌块体、浊积扇和扇三角洲体系；其中等深流、滑塌块体和各种扇体的前缘与BSR分布的吻合率最高，是最有利于天然气水合物聚集成矿的相带。     

陆相湖盆深水重力流沉积特征、砂体结构研究及油气勘探意义—以鄂尔多斯盆地上三叠统长7油层组为例

结合深水重力流沉积理论、野外剖面、岩心、测井等资料的分析,对鄂尔多斯盆地合水地区延长组长7油层组重力流沉积相和砂体结构的类型、特征进行了深入分析。研究表明长7沉积期发育大面积的深水砂岩,主要发育砂质碎屑流、浊流等重力流砂体,砂质碎屑流沉积以块状层理为主,单砂体厚度大,浊流沉积以粒序层理为主,砂泥互层频繁;结合重力流沉积背景下各成因砂体测井曲线形态、垂向发育厚度、垂向连续性及组合特征,将砂体垂向叠置结构划分为多期砂叠置厚层型、厚砂-薄泥互层型、厚砂-薄砂-泥互层型及薄砂-厚泥互层型四种类型,并对研究区单井砂体结构进行了聚类。实践表明,砂质碎屑流沉积区虽是油气藏有利聚集分布带,但分布面积较广,结合砂体结构特征,可进一步细化有利区划分,为致密油藏有利区的优选提供了新的研究思路。     

Deep-water sediment wave fields, bottom current sand channels and gravity flow channel-lobe systems: Gulf of Cadiz, NE Atlantic

Abstract A study of the seafloor of the Gulf of Cadiz west of the Strait of Gibraltar, using an integrated geophysical and sedimentological data set, gives new insights into sediment deposition from downslope thermohaline bottom currents. In this area, the Mediterranean Outflow (MO) begins to mix with North Atlantic waters and separates into alongslope geostrophic and downslope ageostrophic components. Changes in bedform morphology across the study area indicate a decrease in the peak velocity of the MO from >1 m s^?1 to <0·5 m s^?1. The associated sediment waves form a continuum from sand waves to muddy sand waves to mud waves. A series of downslope‐oriented channels, formed by the MO, are found where the MO starts to descend the continental slope at a water depth of ≈700 m. These channels are up to 40 km long, have gradients of <0·5°, a fairly constant width of ≈2 km and a depth of ≈75 m. Sand waves move down the channels that have mud wave‐covered levees similar to those seen in turbidite channel–levee systems, although the channel size and levee thickness do not decrease downslope as in typical turbidite channel systems. The channels terminate abruptly where the MO lifts off the seafloor. Gravity flow channels with lobes on the basin floor exist downslope from several of the bottom current channels. Each gravity flow system has a narrow, slightly sinuous channel, up to 20 m deep, feeding a depositional lobe up to 7 km long. Cores from the lobes recovered up to 8·5 m of massive, well‐sorted, fine sand, with occasional mud clasts. This work provides an insight into the complex facies patterns associated with strong bottom currents and highlights key differences between bottom current and gravity flow channel–levee systems. The distribution of sand within these systems is of particular interest, with applications in understanding the architecture of hydrocarbon reservoirs formed in continental slope settings.     

南秦岭横丹浊积岩系——晚古生代发育于扬子板块被动陆缘上的弧前盆地充填物

南秦岭横丹浊积岩系是一套巨厚的浊流沉积,以向南或南东倾的单斜构造产出。由下而上,该沉积层序包括深水盆地、深水浊积扇和斜坡水道3个相序。相应地,沉积物粒度变粗,厚度变大,火山质组分含量增加,凝灰层大量发育,表明横丹浊积岩系为活动型浊积岩;其古水流方向为NNW—NNE向,物源区为南侧的碧口火山岩系。另外,横丹浊积岩系内还见石英岩、重结晶大理岩成分的砾石,说明其物源还包括被动陆缘环境的沉积物。相序、组构、沉积特征和物源区综合分析表明,横丹浊积岩系为弧前盆地充填物。构筑这一弧前盆地的动力学机制是洋壳板块向南俯冲于扬子板块被动陆缘之下,时代可能晚于中晚泥盆世。     

Anastomosing river sedimentation in the Channel Country of central Australia

Anastomosing river plains of the Channel Country, central Australia, have aggraded slowly over the past 100 ka. Channel sediments accumulate mainly as accretionary benches of mud and sand, sandy channel-base sheets and vegetation-shadow deposits. The channels are laterally stable and the sediments have aggraded locally against erosional banks of tough floodplain muds. Channel sediments are profoundly affected by desiccation during dry periods and by bioturbation caused by within-channel trees and burrowing invertebrates, especially crayfish. Excavations show that mud-dominated channel bodies of low width:thickness ratio are generated by a combination of vertical and lateral accretion. Levees and braided surfaces, composed mainly of mud aggregates, border the channels and are activated during valley-wide floods which lay down distal mud sheets. Floodplain muds are converted to vertisols with gilgai, deep desiccation cracks, and impregnations of carbonate and gypsum. A fixed-channel facies model is applicable to the Channel Country river deposits. Anastomosis apparently results from the need for the system to move large volumes of water and moderate sediment loads across low-gradient interior basins.
Channels distant from upland source areas receive an abundant supply of pedogenic, sand-sized mud aggregates generated on adjacent floodplains and reworked into braid bars during valley-wide floods. Some quartz sand is provided from excavation of subsurface Pleistocene sands in deep channels and waterholes and from aeolian dunes on the floodplains. Adjacent gibber plains supply some gravel to the system.