Stochastic Response Analysis of Piled Offshore Platforms to Earthquake Load

- In this paper, using the theory of stochastic analysis of the response to earthquake load, a stochastic analysis method of the response of piled platforms to earthquake load has been established. In the method, the strong ground motion is considered as three dimensional stationary white noise process and the pile-soil interaction and water-structure interaction are considered. The stochastic response of a typical platform to eqrthquake load has been computed with this method and the results compared with those obtained with the response spectrum analysis method. The comparison shows that the stochastic analysis method of the response of piled platforms to earthquake load is suitable for this kind of analysis.     

Reliability Analysis for Offshore Platform Structural Systems

A system reliability estimation method for spatial jacket platforms is developed in this paper,The jacket platform is modeled into three-dimensional assembly of spatial beam and plate elements in Fi-nite Element Method(FEM).The limit failure states correspond to collapse of a series of structural mem-bers which are identified by engineering design criteria.In this paper the following aspects are taken intoaccount:the punching shear and buckiing failures in member failure modes for the tubular joints and tubu-lar columns respectively;incremental loading approach for establishment of the safety margin equations ofsystem failure;the algorithm of enumerating significant failure modes for the structural systems and otherconcepts,such as the false failure mode and the virtual limit state.The final work is devoted to the reliabili-ty analysis for a practical jacket platform presently put into operation on the Bohai Sea.The computed re-sults shows that method suggested in this paper is feasible and effective for     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Design Factors

For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors...     

Damage Localization of Offshore Platforms Under Ambient Excitation

In this paper Nondestructive Damage Detection (NDD) for offshore platforms is investigated under operational conditions. As is known, there is no easy way to measure ambient excitation, so damage detection methods based on ambient excitation have become very vital for the Structural Health Monitoring (SHM) of offshore platforms. The modal parameters (natural frequencies, damping ratios and mode shapes) are identified from structural response data with the Natural Excitation Technique (NExT) in conjunction with the Eigensystem Realization Algorithm (ERA) . A new method of damage detection is presented, which utilizes the invariance property of element modal strain energy. This method is to assign element modal strain energy to two parts, and defines two damage detection indicators. One is compression modal strain energy change ratio (CMSECR); the other is flexural modal strain energy change ratio (FMSECR). The present modal strain energy is obtained by incomplete modal shape and structural stiffness matr     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms.     

Offshore Structural Control Considering Fluid Structure Interaction

1.IntroductionAmong various control devices,Tuned Mass Damper(TMD)has been mostfrequently usedtothecontrol of structural vibration induced by oscillating loads such as earthquakes,winds,and waves.This is due to the fact that it operates without external e…     

Underwater Explosion Technology for Offshore Engineering Applications

- This article briefs how to improve the holding power of a drilling vessel's anchor and to remove those unreasonable structures by such a technology - underwater-explosion technology. The article gives details of the structure, characteristics and applications of a rocket-launched anchor; as well as the principle, properties, applications of directional explosion cutting.     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.     

Dynamic Responses of Mobile Offshore Base Connectors

A Mobile Offshore Base (MOB) is a multi-purpose logistics base, which can be stationed in coastal or international waters. In the conceptual design of the MOB, attention should be paid to the dynamic responses of the inter-module connectors because tremendous loads occur in the connectors. In this paper, a study on dynamic responses of the MOB connectors is carried out by use of the Rigid Module Flexible Connector (RMFC) model which assumes that the module stiffness is significantly larger than that of the connector. In the analysis, the connector is modeled as a linear spring, which restricts relative translations but allows for relative rotations of modules. The 3-D source distribution method is adopted to determine the hydrodynamic forces of the modules, and the hydrodynamic interaction between modules is taken into account. The module motions and connector loads for 12 connector stiffness cases in regular and irregular waves are calculated with the multi-rigid-body motion equations. And the calculat     

Analysis of Collision Protection for Ocean and Offshore Structures

1 .Introduction Many accidents of ocean and offshore structuresinvolve impact loadings .Some famous ship colli-sion cases arethe Tj rn Bridge (Sweden) ,the West Bridge of the Great Belt Link (Denmark) andtheMaracaibo Bridge (Venezuela) . Most studies usedthe Hertzian contact law(Zukaset al .,1982) tocalculate the impact force and analyze structures subjectedtoimpact loadings .Other alternative meth-ods such as the spring-dashpot and momentumbalance methods utilizedthe coefficient of rest…     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay: Calibration on Design Factors

For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors are developed. Finally, the factors of load, resistance and load combination for the offshore jacket platforms in the Bohai Bay are calibrated and the corresponding design formulae are recommended. The results are proved to be rational in practice, and also illustrate that the proposed target reliability index for offshore jacket platforms in the Bohai Bay is also appropriate.     

Calibration of LRFD Format for Steel Jacket Offshore Platforms in China Offshore Area （ 1 ） ： Statistical Parameters of Loads and Resistances

1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode…     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay: Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms.     

Efficient Approximate Method of Global Reliability Analysis for Offshore Platforms in the Ice Zone

Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method.     

Reliability-Based Full-Life Cycle Optimum Design of Offshore Jacket Platform

Based on the consideration of operation environment and structural property, an optimnm design model of offshore jacket platform is developed in this paper, namely, the reliability-based full-life cycle optimum design model. In this model, the time-dependent reliability assessment method for structural members is established by combination of the decrease, of sectional size and performance deterioration of material. The initial investment, maintenance cost and failure loss cost are assembled into the model. The total cost of the platform structure system in its full service period is chosen as the objective function, and the initial reliabilities of the layer elements partitioned in advance are taken as the design variables. Different models are obtained, depending on whether the system reliability eonstraint is considered or not. This optimum design model can result in the lowest full-life cost and the optimal initial layer reliability of an offshore jacket platform in the design of marine structures. The feasibility of this model is illustrated with an actual jacket platform in the Liaodong Gulf as an example.     

Reliability-Based Design for Jacket Platform Under Extreme Loads

In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform.     

Feedback and Feedforward Optimal Control for Offshore Jacket Platforms

The optimal control is investigated for linear systems affected by external harmonic disturbance and applied to vibration control systems of offshore steel jacket platforms. The wave-induced force is the dominant load that offshore structures are subjected to, and it can be taken as harmonic excitation for the system. The iineafized Morison equation is employed to estimate the wave loading. The main result concerns the existence and design of a realizable optimal regulator, which is proposed to damp the forced oscillation in an optimal fashion. For demonstration of the effectiveness of the control scheme, the platform performance is investigated for different wave states. The simulations axe based on the tuned mass damper (TMD) and the active mass damper (AMD) control devices. It is demonstrated that the control scheme is useful in reducing the displacement response of jacket-type offshore platforms.     

导管架式海洋平台结构极限承载力分析的整体推进法及其软件

根据非线性有限元逐步分析的思想,以已有的结构弹性分析软件为计算核心,提出了一种近似分析结构极限承载力的方法——整体推进法;采用整体推进法,以导管架式海洋平台结构线弹性分析软件ＥＮＳＡ为计算核心,考虑结构构件的损伤影响和维修加固效果,编制了导管架式海洋平台结构极限承载力近似分析软件ＵＡＰ,为导管架式海洋平台结构的安全度评定提供了方法和手段;最后对渤海八号生产／储油平台在１９９３年的状态和ＪＺ２０２ＭＵＱ平台的完好状态进行了极限承载力分析