Semi-Active Control of Wave-Induced Vibration for Offshore Platforms by Use of MR Damper

The objective of the present research is to examine the effectiveness of the lateral vibration control of wave-excited re-sponse of offshore platforms with magnelo-rheological (MR) damper, In this study, the offshore platform is simplified to be a single-degree-of-freedom (SDOF) system by extracting the first vibration mode of the struclure. The exlernal 'generalized' wave force is determined with a white noise via a designed filler. A semi-active control method based on optimal control the-ory is proposed considering that the yield stress of the MR damper can be varied continuously within a certain range. The dy-namics of SDOF structure coupled with the MR damper is investigated. Numerical simulation demonstrates that the MR damper with this control strategy can significantly reduce the maximum responses and the root-mean-square (RMS) values.     

Feedforward and feedback optimal control for offshore structures subjected to irregular wave forces

This paper studies the vibration control of a jacket-type offshore platform with an active mass damper (AMD) and presents a feedforward and feedback optimal control (FFOC) law. The linearized Morison equation is employed to estimate the wave load. The offshore structure is simplified into a single degree of freedom (SDOF) system. The original vibration control is formulated as the optimal control for a linear discrete-time system affected by external disturbances with known dynamic characteristics but unknown initial conditions. We give the existence and uniqueness conditions of the FFOC law. Simulation results show that, compared with the classical state feedback optimal control (CFOC) law, the presented control scheme is more efficient in reducing the displacement and velocity of the offshore structure subjected to irregular wave forces.     

海洋平台磁流变阻尼器控制技术研究

为了更有效地减小海洋平台动力响应,采用基于模糊控制算法的磁流变阻尼器对海洋平台的振动进行控制.以海洋平台位移响应误差和误差变化为输入变量,以最优控制力为输出变量,优化设计出模糊控制器.考虑实际磁流变阻尼器输出控制力上限存在限制,采用半主动控制算法计算接近于最优控制力的半主动控制力.以一固定式海洋平台为算例研究磁流变阻尼器的振动控制效果及其模糊性,仿真结果表明模糊磁流变控制器对于平台的振动可以实现非常有效的控制,且控制效果对结构阻尼和环境的不确定性具有较好的模糊性.     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.     

随机波浪作用下海洋平台主动控制的时滞补偿研究

基于预测控制理论，研究了适用于海洋平台的时滞补偿控制算法。该方法借助于随机波浪力的近似公式和卡尔曼滤波原理，推导出了随机波浪力向前一步预测公式，同时采用卡尔曼滤波方程，实现了对状态向量向前一步预测。利用随机波浪力及状态向量的实时在线预测公式，推导出最优控制力向前一步预测的表达式。在此基础上，发展了不仅适用于反馈控制系统而且适用于前馈-反馈控制系统的时滞补偿算法。采用一典型海洋平台为数值算例，计算结果表明，该方法在一定时滞范围内对海洋平台主动控制中时滞的补偿效果是显著的。     

海洋平台磁流变阻尼器半主动控制研究

基于现代最优控制理论建立海洋平台磁流变 (MR)半主动控制系统的数学模型 ,采用白噪声过程通过滤波器来近似随机波浪力谱。以典型导管架平台为算例 ,对磁流变阻尼器进行了参数设计。分析了 MR阻尼器对海洋平台振动控制的有效性 ,仿真结果表明 ,采用磁流变阻尼器对海洋平台进行半主动控制能够有效的减小平台的动态响应。     

Vibration Control of Multi-Tuned Mass Dampers for An Offshore Oil Platform

The purpose of this study is to investigate the effectiveness of multi-tuned mass dampers (MTMD) on mitigating vi-bration of an offshore oil platform subjected to ocean wave loading. An optimal design method is used to determine the optimal damper parameters under ocean wave loading. The force on the structure is determined by use of the linearized Morison equation. Investigation on the deck motion with and vvithout MTMD on the structure is made under design condi-tions. The results show that MTMD with the optimized parameters suppress the response of each structural mode. The sensitivity of optimum values of MTMD to characteristic wave parameters is also analyzed. it is indicated that a single TMD on the deck of a platform can have the best performance, and the small the damping value of TMD, the betler the vibration control.     

Wind and wave induced behaviour of offshore guyed tower platforms

Offshore guyed tower platforms belong to the group of compliant offshore platforms which are most suited for deep water exploration. The basic feature of compliant offshore platforms is that they are designed to move with the waves, in at least some degrees-of-freedom. As far as excitation of wave frequencies is concerned, the system opposes wave forces by inertial effects. The offshore guyed tower derives its stability against lateral movement from its mooring system.In this study, the response of offshore guyed towers to random forces generated by wind and wave is investigated. The exposed portion of the tower is subjected to the action of turbulent wind, while the submerged portion is acted upon by random wave forces. The analysis includes the nonlinearities due to the Morison equation of drag force, the variable submergence effect due to waves, the instantaneous position of the tower and force excursion relation of the mooring lines. A parametric study is conducted to investigate the behaviour of the tower under waves, and the combined effect of wind and wave forces.     

Passive control of offshore jacket platforms

The wave-induced dynamic force is one of the most important excitations to be dealt with in the design of offshore structures. In order to perform a reliable design of an offshore structure, it is important to obtain an exact evaluation of its dynamic response but also to examine the ways of reducing the response. This paper presents the response of offshore jacket platforms installed with energy dissipation devices such as viscoelastic, viscous and friction dampers under wave loading. The offshore jacket platforms are modeled as multi-degrees-of-freedom system provided with dampers at each floor location. The wave forces are modeled as per Morison's equation. The governing equations of motion of the jacket platform with dampers are derived and their solution in the frequency domain is presented. The uni-directional random wave loading is expressed by the Pierson-Muskowitz spectrum. The response of the jacket platform with viscoelastic, viscous and friction dampers is compared with the corresponding response without dampers in order to investigate the effectiveness of the passive control systems. It is observed that the additional dampers add substantial damping to structure and thus favorably control the response of platform structure. Among the various energy dissipation devices used for study, the viscoelastic dampers perform better in comparison to the other dampers. This is due to the fact that the added viscoelastic dampers contribute to increased viscous damping as well as lateral stiffness which reduces the response of the offshore jacket platforms significantly.     

Predicting the capability-polar-plots for dynamic positioning systems for offshore platforms using artificial neural networks

As the capability of polar plots becomes better understood, improved dynamic positioning (DP) systems are possible as the control algorithms greatly depend on the accuracy of the aerodynamic and hydrodynamic models. The measurements and estimation of the environmental disturbances have an important role in the optimal design and selection of a DP system for offshore platforms. The main objective of this work is to present a new method of predicting the Capability-Polar-Plots for offshore platforms using the combination of the artificial neural networks (NNs) and the capability polar plots program (CPPP). The estimated results from a case study for a scientific drilling vessel are presented. A trained artificial NN is designed in this work and is able to predict the maximum wind speed at which the DP thrusters are able to maintain the offshore platform in a station-keeping mode in the field site. This prediction for the maximum wind speed will be a helpful tool for DP operators in managing station-keeping for offshore platforms in an emergency situation where the automation of the DP systems is disabled. It is obvious from the obtained results that the developed technique has potential for the estimation of the capability-polar-plots for offshore platforms. This tool would be suitable for DP operators to predict the maximum wind speed and direction in a very short period of time.     

Dynamic modeling and vibration suppression for an offshore wind turbine with a tuned mass damper in floating platform

The worldwide demand for renewable energy is increasing rapidly. Wind energy appears as a good solution to copy with the energy shortage situation. In recent years, offshore wind energy has become an attractive option due to the increasing development of the multitudinous offshore wind turbines. Because of the unstable vibration for the barge-type offshore wind turbine in various maritime conditions, an ameliorative method incorporating a tuned mass damper (TMD) in offshore wind turbine platform is proposed to demonstrate the improvement of the structural dynamic performance in this investigation. The Lagrange's equations are applied to establish a limited degree-of-freedom (DOF) mathematical model for the barge-type offshore wind turbine. The objective function is defined as the suppression rate of the standard deviation for the tower top deflection due to the fact that the tower top deflection is essential to the tower bottom fatigue loads, then frequency tuning method and genetic algorithm (GA) are employed respectively to obtain the globally optimum TMD design parameters using this objective function. Numerical simulations based on FAST have been carried out in typical load cases in order to evaluate the effect of the passive control system. The need to prevent the platform mass increasing obviously has become apparent due to the installation of a heavy TMD in the barge-type platform. In this case, partial ballast is substituted for the equal mass of the tuned mass damper, and then the vibration mitigation is simulated in five typical load cases. The results show that the passive control can improve the dynamic responses of the barge-type wind turbine by placing a TMD in the floating platform. Through replacing partial ballast with a uniform mass of the tuned mass damper, a significant reduction of the dynamic response is also observed in simulation results for the barge-type floating structure.     

Multiple-Step Predictive Control for Offshore Structures

—Ocean wave propagation is slow,visible and measurable,so a wave theory can be used to approxi-mately predict the imminnent wave force on an offshore structure based on measured,real-time wave elevation nearthe structure.This predictability suggests the development of a more efficient algorithm,than those that have beendeveloped for structures under wind and seismic loads,for the active vibration control of offshore structures.Thepresent study delveops a mutiple-step predictive optimal control(MPOC)algorithm that accounts for multiple-step external loading in the determibation of optimal control forces.The control efficiency of the newly developedMPOC algorithm has been investigated under both regular(single-frequency)and irregular(multiple-frequency)wave loads,and compared with that of two other well-known optimal control algorithms:classical linear optimalcontrol(CLOC)and instantaneou optimal control(IOC).     

随机波浪荷载作用下海洋平台的前馈-反馈振动控制研究

该文研究线性前馈 -反馈控制策略对海洋平台振动控制的有效性。线性前馈 -反馈控制只有当输入荷载为白噪声过程时 ,所实施的控制才是最优的 ,因此该文采用一白噪声过程通过滤波器来近似随机波浪力谱 ,并将海洋平台 -主动控制系统的动力学方程转化为符合随机最优控制要求的增广状态空间表达形式。依据设计目标中对安全性以及经济性的权衡 ,通过使二次型控制目标函数最小化 ,推导出了随机最优控制力的计算方法 ,从而实现了最优控制的目的。在频率域上分析了海洋平台受控后的振动响应 ,结合典型的海洋天然气生产平台算例 ,将前馈 -反馈控制与反馈控制、TMD控制加以比较 ,总结了前馈 -反馈控制的特点及其优越性     

Seismic Response Reduction for Fixed Offshore Platform by Tuned Liquid Damper

An approach to seismic response reduction for offshore platforms by the use of the tuned liq-uid damper is presented in this paper.First of all,the effects of the tuned frequency ratio and excited fre-quency ratio on the seismic response reduction of the platform structure are investigated.Based on the re-sults,a mechanical model and equation of motion for the TLD-platform system are established.And theneffectiveness of the appraoch is verified by numerical calculation.     

Semi-Active TLCD Control of Fixed Offshore Platforms Using Artifical Neural Networks

1 .Introductionanyoffshoreplatformshavebeenbuiltwiththedevelopmentofoceanengineering .However ,mostoffshorearelocatedinseismicregionsandtheplatformsareeasilytobeseriouslydamagedbyearthquakes.Hence ,theanti earthquakedesignhasalwaysbeenamajorpartofresearchonoffshoreplatforms.Theinclusionofvibrationabsorbersintheoffshoreplatformcanbeanattractivemethodofmitigatingseismicresponses .Vibrationabsorberscanbecategorizedintoactiveandpassive .Thetunedmassdamper (TMD)(FujinoandAbe ,1 993) ,eitherpassi…     

Feed-forward control for dynamic positioning in random waves based on quadratic impulse function and real-time wave measurement

The real-time estimation of second-order difference-frequency wave forces using real-time random-wave measurement is developed for the FF (feed-forward) control based dynamic positioning of floating offshore vessels and platforms. The efficacy of the developed FF control scheme is validated by using the in-house hull-mooring-riser-thruster fully coupled time-domain computer simulation program through comparisons with the results by the conventional feedback-control-only case. The feedback (FB) control intends to reduce the accumulated position-excursion error, meanwhile the proposed feed-forward control compensates the controllable slowly-varying wave loads by activating thrusters in advance based on the real-time estimation of the second-order difference-frequency wave loadings using the real-time signal of random incident wave. The real-time estimation of the second-order difference-frequency wave loads is done by using the double-convolution integral with pre-calculated QIF (quadratic impulse function). The numerical DP system is successfully implemented with the FF control algorithm in the vessel-thruster fully coupled time-domain simulation program. The developed schemes are applied to a turret-moored FPSO (floating production storage offloading) with six dynamic-positioning (DP) azimuth thrusters in two non-collinear storm conditions. It is clearly demonstrated that the developed FF control scheme performs much better than the conventional feedback-control-only case. The corresponding reductions in horizontal offsets, motions, mooring tensions, and fuel consumptions by using the developed FF control scheme are underscored.     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms.     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay: Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms.     

Optimal Design of TMD Under Long-Term Nonstationary Wave Loading

—Traditionally,the use of a tuned mass damper(TMD)is to improve the surviability of the pri-mary structure under extraordinary loading environment while the design loading condition is describedby either a harmonic function or a stationary random process that can be fully characterized by a powerspectral density(PSD)function.Aiming at prolonging the fatigue life of an offshore platform,this studyconsiders an optimal design of TMD for the platform under long-term nonstationary loading due tolong-term random sea waves characterized by a probabilistic power spectral density(PPSD)function.Inprinciple,a PPSD could be derived based on numerous ordinary PSD functions;and each of them is treat-ed as realization of the corresponding PPSD.This study provides a theoretical development for theoptimal TMD design by minimizing the cost function to be the mean square value of the expectedlong-term response.A numerical example is presented to illustrate the developed design procedure.     

Wave run-up on cylindrical and cone shaped foundations for offshore wind turbines

During the last decade, several offshore wind-farms were built and offshore wind energy promises to be a suitable alternative to provide green energy. However, there are still some engineering challenges in placing the foundations of offshore wind turbines. For example, wave run-up and wave impacts cause unexpected damage to boat landing facilities and platforms. To assess the forces due to wave run-up, the distribution of run-up around the pile and the maximum run-up height need to be known. This article describes a physical model study of the run-up heights and run-up distribution on two shapes of foundations for offshore wind turbines, including both regular and irregular waves. The influence of wave steepness, wave height and water depth on run-up is investigated. The measured run-up values are compared with applicable theories and previous experimental studies predicting run-up on a circular pile.