Qualitative and quantitative assessment of TanDEM-X DEM over western Himalayan glaciated terrain

Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography.     

Cartosat-1 height product and ICESat/GLAS data for digital elevation surface generation

Space born systems like Geoscience Laser Altimeter System (GLAS) onboard collect data for ice, cloud and Land. Elevation satellite (ICESat) collects an unparalleled data set as waveform over terrestrial targets, helps in evaluating the global elevation data. In this study we compared the Digital Elevation Surface (DES) generated by Cartosat-1 point data and DES generated by merging the Cartosat-1 data with ICESat data. Outputs in the form of interpolated surfaces were evaluated with the help of differential global positioning system (DGPS) points collected from study area. The study showed the results that the DES generated from Cartosat — 1 data had less elevation accuracy when compared with the DGPS data. While merging Cartosat-1 point height data with ICESat/GLAS data resulted in better accuracy. On the practical side for processing the interpolation, based on the research the ICESat /GLAS with Cartosat-1 height data can produce better DES compared to the Cartosat-1 stereo data. The DES was generated using geostatistical interpolation methods in which the global polynomial method proved to be the better for generating the surface compare to other interpolation techniques studied in this work. For co-kriging method, the accuracy decreases compare to the kriging interpolation, due to the complexity of parameters that were used for interpolation. On the theory side, based on this research the statement of which interpolation technique is better than the other cannot be mentioned easily, because these are based on the data type, parameters and also on method of interpolation. So research experiment should be more intensely and with more focused.     

About the International GIS Workshop on Antarctic King George Island

Digital Elevation Models (DEM) of a hilly–valley region are prepared using stereo images of Cartosat-1 and Shuttle Radar Topography Mission (SRTM) images. The procedure of ortho-image generation from Cartosat-1 stereo images and the estimation of ground features from ortho-image are elaborated in the paper. Comparison of DEMs prepared from both images is discussed in terms of the quality of ground features detection, hydrological applications and geometrical calculations. It is found that DEM prepared from Cartosat-1 images are more accurate in the valley region and hence it is better suited for hydrological applications. On the contrary, for hilly region, SRTM images produce better DEM. However, if ground control points and Rational Polynomial Coefficients can be obtained in the hilly region, more accurate DEM can be prepared using Cartosat-1 stereo images.     

Improving Cartosat-1 DEM accuracy using synthetic stereo pair and triplet

Cartosat–1 is the first Indian Remote Sensing Satellite capable of providing along-track stereo images. Cartosat–1 provides forward stereo images with look angles +26° and −5° with respect to nadir for generating Digital Elevation Models (DEMs), Orthoimages and value added products for various applications. A pitch bias of −21° to the satellite resulted in giving reverse tilt mode stereo pair with look angles of +5° and −26° with respect to nadir. This paper compares DEMs generated using forward, reverse and other possible synthetic stereo pairs for two different types of topographies. Stereo triplet was used to generate DEM for Himalayan mountain topography to overcome the problem of occlusions.For flat to undulating topography it was shown that using Cartosat-1 synthetic stereo pair with look angles of −26° and +26° will produce improved version of DEM. Planimetric and height accuracy (Root Mean Square Error (RMSE)) of less than 2.5 m and 2.95 m respectively were obtained and qualitative analysis shows finer details in comparison with other DEMs. For rugged terrain and steep slopes of Himalayan mountain topography simple stereo pairs may not provide reliable accuracies in DEMs due to occlusions and shadows. Stereo triplet from Cartosat-1 was used to generate DEM for mountainous topography. This DEM shows better reconstruction of elevation model even at occluded region when compared with simple stereo pair based DEM. Planimetric and height accuracy (RMSE) of nearly 3 m were obtained and qualitative analysis shows reduction of outliers at occluded region.     

Evaluation and Comparison of Multi Resolution DEM Derived Through Cartosat-1 Stereo Pair – A Case Study of Damanganga Basin

The study evaluates and compares Digital Elevation Model (DEM) data of various grid spacing derived using high resolution Cartosat 1 stereo data for hydrologic applications. DEM is essential in modeling different environmental processes which depend on surface elevation. The accuracy of derived DEM varies with grid spacing and source. The CartoDEM is the photogrammetric DEM derived from stereo pairs. Damanganga basin lying in the Western Ghats was analysed using 11 Carto stereo pairs. The process of triangulation resulted in RMSE of 0.42. DEM was extracted at 10 m, 20 m, 30 m, 40 m, 50 m and 90 m grid spacing and compared with ASTER GDEM (30 m) and SRTM DEM (90 m). DEM accuracy was checked with Root Mean Square Error (RMSE) statistic for random points generated in different elevation zones. Extracted stream networks were compared based on Correctness Index and Figure of Merit index, calculated for all the Digital Elevation Models at varying cell sizes. In order to further evaluate the DEM’s, a simple flood simulation with no water movement and no consideration of real time precipitation data was carried out and relationship between heights of flood stage and inundation area for each Digital Elevation Model was also established.     

CO-Kriging Approach for Cartosat-1 Height Product with ICESat/GLAS Data for Digital Elevation Surface Generation

Nowadays, Geostatistics and its various interpolation techniques have become a major threshold area in the field of research in GIS. In this research work poorly sampled (less accurate height data relative to ICESat/GLAS height data) Cartosat-1 height data has been used with well sampled (more accurate height data relative to Cartosat-1 height data) ICESat/GLAS LiDAR (Light Detection and Ranging) height point data using Cokriging Interpolation technique, to study the effect of ICESat/GLAS on Cartosat-1 height data. Space borne LiDAR data has led researchers to explore its utilities in many applications. Space borne LiDAR data can be acquired through space borne LiDAR sensors also, like; GLAS (Geoscience Laser Altimeter System) system onboard ICESat (Ice, Cloud and land Elevation Satellite) satellite. In this study, it has been tried to apply Cokriging interpolation on two different sources of data sets, with a common variable (elevation) to generate DES and assessment of this surface has been conducted by DGPS data. After optimizing Cokriging parameters, results of digital elevation surface (DES) generated using Cokriging showed that RMSE has been second least than global polynomial in comparison to Kriging interpolation RMSE after being evaluated by GPS values. So, global polynomial as well as cokriging interpolation technique out performs while comparing with kriging technique for DES generation.     

多准则约束的ICESat/GLAS高程控制点筛选

激光测高卫星在获取全球高程控制点方面具有独特的优势,本文针对ICESat(Ice,Cloud and land Elevation Satellite)卫星上搭载的地球激光测高系统GLAS(Geo-science Laser Altimetry System),提出了一种多准则约束的高程控制点筛选算法。算法综合利用全球公开版的SRTM(Shuttle Radar Topography Mission)DEM数据对GLAS进行粗差剔除,然后利用GLA14产品中的云量、姿态质量标记、饱和度参数、增益参数等多种与测距有关的属性参数进行粗粒度的筛选,保留受云层、大气、地表反射率等影响较小的激光足印点,最后结合GLA01的波形特征参数做进一步精细筛选,提取出高精度的激光点作为高程控制点。本文还采用天津、河北两个实验区的数据,利用高精度的DEM成果数据对筛选的结果进行了验证。实验结果表明,经多准则约束筛选后的激光足印点具有很高的高程精度,能够作为1∶50000甚至1∶10000立体测图时的高程控制点使用,研究结论可为国产高分辨率卫星在境外地区进行无地面控制点的立体测图提供参考。     

Assessment of freely available CartoDEM V1 and V1.1R1 with respect to high resolution aerial photogrammetric DEM in high mountains

The accuracy of DEMs shows wide variations from one terrain to another and it needs to be determined. This study evaluates NRSC (National Remote Sensing Centre, Hyderabad, India) CartoDEM V1 and V1.1R1 with respect to resampled ADS80 DEM for parts of the Himalayas. Both the test DEMs were properly registered with reference to resampled ADS80 DEM and then individually subtracted to get the difference DEMs. Visual and statistical analyses were performed to assess the quality of the tested DEMs in terms of visible terrain and vertical accuracy. For calculating the accuracies in different terrain classes, slope and aspect maps were generated from the ADS80 DEM. Properly registered Landsat5 TM data were used for the development of the land cover map with four classes. The overall vertical accuracy measured for CartoDEM V1 was 269.9 m (LE90), while CartoDEM V1.1R1 showed huge improvement in the accuracy with 68.5 m (LE90).     

Evaluation of digital elevation models for delineation of hydrological response units in a Himalayan watershed

This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha).     

多源DEM融合的高差拟合神经网络方法

本文侧重于介绍智能化摄影测量机器学习的高差拟合神经网络方法。观测手段和处理方式等限制导致全球高质量无缝DEM数据的缺乏,进而制约了它在水文、地质、气象及军事等领域的应用。本文提出了一种基于高差拟合神经网络的多源DEM融合方法,尝试融合全球DEM产品SRTM1、ASTER GDEM v2和激光雷达测高数据ICESat GLAS。首先,根据ICESat GLAS的相关参数及与DEM数据的高程差值,结合坡度自适应的思想设置高差阈值对ICESat GLAS进行滤波,剔除异常数据点。然后,以ICESat GLAS数据为控制点,利用神经网络模型拟合ASTER GDEM v2的误差分布。以地形坡度信息和经纬度坐标作为网络输入,ICESat GLAS和ASTER GDEM v2的高程差值作为目标输出,训练得到预测高差,将其与ASTER GDEM v2高程值相加即可获得校正结果。最后,引入TIN差分曲面的方法,利用校正后的ASTER GDEM v2高程值对SRTM1的数据空洞进行填充,融合生成空间无缝DEM。本文通过随机选取数据进行真实试验,对模型进行了精度验证,并给出了处理结果的定量评价和目视效果。结果表明,不论是空洞还是整体区域,本文方法相比其他DEM数据集和其他方法的处理结果都能够在RMSE上表现出优势,同时,本文提出的方法能够有效克服ASTER GDEM中异常值的影响,得到空间无缝DEM。     

Reclamative grouping of ravines using Cartosat-1 PAN stereo data

Information on the depth and bed width of ravines (network of gullies) at large scales is critical for their reclamation and management. Hitherto such information has been generated from aerial photographs and space borne stereo images with medium to coarse ‘z’ – axis resolution. The present study, aims at demonstrating the potential of Cartosat ?1 (an Indian Earth observations satellite) stereo images with 2.5 m spatial resolution in deriving morphometric information on ravines for their reclamative grouping. The study area is a part of Jhansi and Hamirpur districts of Uttar Pradesh, northern India. The approach involves acquiring precise ground control points using Differential GPS (DGPS), triangulation, DEM extraction and generation of ortho image as well as anaglyphs for stereo viewing. The depth and bed width of ravines were measured in the field for validation. A comparison with field observations reveal that the bed width of ravines and depth can be measured successfully with Carto-1 stereo data. The anaglyph data was used to delineate various categories of ravines based on their depth and bed width. Results indicate that the Cartosat-1 stereo images are quite suitable for delineation of three categories of ravines, namely shallow (<3 m deep and <18 m bed width), medium deep (3–9 m deep and >18 m bed width) and deep (>9 m deep) which are important for their reclamation.     

Evaluation of vertical accuracy of open source Digital Elevation Model (DEM)

Digital Elevation Model (DEM) is a quantitative representation of terrain and is important for Earth science and hydrological applications. DEM can be generated using photogrammetry, interferometry, ground and laser surveying and other techniques. Some of the DEMs such as ASTER, SRTM, and GTOPO 30 are freely available open source products. Each DEM contains intrinsic errors due to primary data acquisition technology and processing methodology in relation with a particular terrain and land cover type. The accuracy of these datasets is often unknown and is non-uniform within each dataset. In this study we evaluate open source DEMs (ASTER and SRTM) and their derived attributes using high postings Cartosat DEM and Survey of India (SOI) height information. It was found that representation of terrain characteristics is affected in the coarse postings DEM. The overall vertical accuracy shows RMS error of 12.62 m and 17.76 m for ASTER and SRTM DEM respectively, when compared with Cartosat DEM. The slope and drainage network delineation are also violated. The terrain morphology strongly influences the DEM accuracy. These results can be highly useful for researchers using such products in various modeling exercises.     

Cartosat-1 derived DEM (CartoDEM) towards Parameter Estimation of Microwatersheds and Comparison with ALTM DEM

Hydrologic analysis of microwatersheds is essential for water resources planning at large scale. Space based input for decentralized planning at panchayat level use high resolution DEM. Drainage and slope play important role in planning and Digital Elevations Models (DEM) are widely being used for estimation of hydrologic parameters which are useful as input for hydrologic models. The estimates vary as per resolution and type of DEM. This paper evaluates the suitability of DEM derived through Cartosat-1 satellite stereo data(CartoDEM) for hydrologic parameter estimation of microwatersheds and compares the results with Airborne Laser Terrain Mapper (ALTM) based DEM data. Comparison is based on the hydrologic parameters delineated in Geographical Information System. Microwatersheds are delineated and drainage length extracted using two different cell sizes for both DEMs. Correctness Index, Figure of Merit, visual comparison, Percent within buffer and Junction comparison method, compared extracted river network. Average watershed slope is calculated using three different methods. CartoDEM derived drainage is comparable with ALTM derived drainage. There is high correlation between Carto5 and Caro10 DEMs in terms of drainage delineation and slope calculation. Average watershed slope vary as per calculation methods but average channel slope value (S3) although less, is comparable across DEMs.     

基于星载激光雷达和雷达高度计数据的南极冰盖表面高程制图

南极数字高程模型DEMs(Digital Elevation Models)是研究极区大气环流模式,南极冰盖动态变化和南极科学考察非常重要的基础数据。目前,科学家已经发布了五种不同的南极数字表面高程模型。这些数据都是由卫星雷达高度计,激光雷达和部分地面实测数据等制作而成。尽管如此,由于海洋与冰盖交接的南极冰盖边缘区随时间的快速变化,有必要根据新的卫星数据及时更新南极冰盖表面高程数据。因此,我们利用雷达高度计数据(Envisat RA-2)和激光雷达数据(ICESat/GLAS)制作了最新的南极冰盖高程数据。为提高ICESat/GLAS数据的精度,本文采用了五种不同的质量控制指标对GLAS数据进行处理,滤除了8.36%的不合格数据。这五种质量控制指标分别针对卫星定位误差、大气前向散射、饱和度及云的影响。同时,对Envisat RA-2数据进行干湿对流层纠正、电离层纠正、固体潮汐纠正和极潮纠正。针对两种不同的测高数据,提出了一种基于Envisat RA-2和GLAS数据光斑脚印几何相交的高程相对纠正方法,即通过分析GLAS脚印点与Envisat RA-2数据中心点重叠的点对,建立这些相交点对的高度差(GLAS-RA-2)与表征地形起伏的粗糙度之间的相关关系,对具有稳定相关关系的点对进行Envisat RA-2数据的相对纠正。通过分析南极冰盖不同区域的测高点密度,确定最终DEM的分辨率为1000 m。考虑到南极普里兹湾和内陆地区的差异性,将南极冰盖分为16个区,利用半方差分析确定最佳插值模型和参数,采用克吕金插值方法生成了1000 m分辨率的南极冰盖高程数据。利用两种机载激光雷达数据和我国多次南极科考实测的GPS数据对新的南极DEM进行了验证。结果显示,新的DEM与实测数据的差值范围为3.21—27.84 m,其误差分布与坡度密切关系。与国际上发布的南极DEM数据相比,新的DEM在坡度较大地区和快速变化的冰盖边缘地区精度有较大改进。     

Comparison of basin morphometry derived from topographic maps,ASTER and SRTM DEMs: an example from Kerala,India

The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform.     

Fusion of high-resolution DEMs derived from COSMO-SkyMed and TerraSAR-X InSAR datasets

Voids caused by shadow, layover, and decorrelation usually occur in digital elevation models (DEMs) of mountainous areas that are derived from interferometric synthetic aperture radar (InSAR) datasets. The presence of voids degrades the quality and usability of the DEMs. Thus, void removal is considered as an integral part of the DEM production using InSAR data. The fusion of multiple DEMs has been widely recognized as a promising way for the void removal. Because the vertical accuracy of multiple DEMs can be different, the selection of optimum weights becomes a key problem in the fusion and is studied in this article. As a showcase, two high-resolution InSAR DEMs near Mt. Qilian in northwest China are created and then merged. The two pairs of InSAR data were acquired by TerraSAR-X from an ascending orbit and COSMO-SkyMed from a descending orbit. A maximum likelihood fusion scheme with the weights optimally determined by the height of ambiguity and the variance of phase noise is adopted to syncretize the two DEMs in our study. The fused DEM has a fine spatial resolution of 10 m and depicts the landform of the study area well. The percentage of void cells in the fused DEM is only 0.13 %, while 6.9 and 5.7 % of the cells in the COSMO-SkyMed DEM and the TerraSAR-X DEM are originally voids. Using the ICESat/GLAS elevation data and the Chinese national DEM of scale 1:50,000 as references, we evaluate vertical accuracy levels of the fused DEM as well as the original InSAR DEMs. The results show that substantial improvements could be achieved by DEM fusion after atmospheric phase screen removal. The quality of fused DEM can even meet the high-resolution terrain information (HRTI) standard.     

Accuracy Assessment of Digital Elevation Model Generated by SAR Stereoscopic Technique Using COSMO-Skymed Data

Radargrammetry technique using the stereoscopic synthetic aperture radar (SAR) images is used for the generation of a digital elevation model (DEM) of a region requires only the amplitude images. SAR stereoscopic technique is analogous to the stereo-photogrammetric technique where the optical stereoscopic images are used for DEM generation. While the advantages of the SAR images are their indifference to atmospheric transparency and solar illumination conditions, the side-looking geometry of the SAR increases the complexity in the SAR stereo analysis. The availability of high spatial and temporal resolution SAR data in recent years has facilitated generation of high-resolution DEM with greater vertical accuracy using radargrammetric technique. In the present study, attempt has been made to generate the DEM of Dehra Dun region, India, from the COSMO-Skymed X-band SAR data-pair acquired at 8 days interval through the radargrammetry technique. Here, radargrammetric orientation approach has been adopted to generate the DEM and various issues and processing steps with the radargrammetry technique have been discussed. The DEM was validated with ground measured elevation values using a differential global positioning system and the root-mean-square error of the DEM was found as 7.3 m. The DEM was compared with the reference DEM of the study area generated from the Cartosat-1 stereo data with a model accuracy of 4 m.     

Comparative evaluation of horizontal accuracy of elevations of selected ground control points from ASTER and SRTM DEM with respect to CARTOSAT-1 DEM: a case study of Shahjahanpur district,Uttar Pradesh,India

Digital elevation model (DEM) data of Shuttle Radar Topography Mission (SRTM) are distributed at a horizontal resolution of 90 m (30 m only for US) for the world, Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEM data provide 30 m horizontal resolution, while CARTOSAT-1 (IRS-P5) gives 2.6 m horizontal resolution for global coverage. SRTM and ASTER data are available freely but 2.6 m CARTOSAT-1 data are costly. Hence, through this study, we found out a horizontal accuracy for selected ground control points (GCPs) from SRTM and ASTER with respect to CARTOSAT-1 DEM to implement this result (observed from horizontal accuracy) for those areas where the 2.6-m horizontal resolution data are not available. In addition to this, the present study helps in providing a benchmark against which the future DEM products (with horizontal resolution less than CARTOSAT-1) with respect to CARTOSAT-1 DEM can be evaluated. The original SRTM image contained voids that were represented digitally as ?140; such voids were initially filled using the measured values of elevation for obtaining accurate DEM. Horizontal accuracy analysis between SRTM- and ASTER-derived DEMs with respect to CARTOSAT-1 (IRS-P5) DEM allowed a qualitative assessment of the horizontal component of the error, and the appropriable statistical measures were used to estimate their horizontal accuracies. The horizontal accuracy for ASTER and SRTM DEM with respect to CARTOSAT-1 were evaluated using the root mean square error (RMSE) and relative root mean square error (R-RMSE). The results from this study revealed that the average RMSE of 20 selected GCPs was 2.17 for SRTM and 2.817 for ASTER, which are also validated using R-RMSE test which proves that SRTM data have good horizontal accuracy than ASTER with respect to CARTOSAT-1 because the average R-RMSE of 20 GCPs was 3.7 × 10^?4 and 5.3 × 10^?4 for SRTM and ASTER, respectively.     

Effect of the SRTM global DEM on the determination of a high-resolution geoid model: a case study in Iran

Any errors in digital elevation models (DEMs) will introduce errors directly in gravity anomalies and geoid models when used in interpolating Bouguer gravity anomalies. Errors are also propagated into the geoid model by the topographic and downward continuation (DWC) corrections in the application of Stokes’s formula. The effects of these errors are assessed by the evaluation of the absolute accuracy of nine independent DEMs for the Iran region. It is shown that the improvement in using the high-resolution Shuttle Radar Topography Mission (SRTM) data versus previously available DEMs in gridding of gravity anomalies, terrain corrections and DWC effects for the geoid model are significant. Based on the Iranian GPS/levelling network data, we estimate the absolute vertical accuracy of the SRTM in Iran to be 6.5 m, which is much better than the estimated global accuracy of the SRTM (say 16 m). Hence, this DEM has a comparable accuracy to a current photogrammetric high-resolution DEM of Iran under development. We also found very large differences between the GLOBE and SRTM models on the range of −750 to 550 m. This difference causes an error in the range of −160 to 140 mGal in interpolating surface gravity anomalies and −60 to 60 mGal in simple Bouguer anomaly correction terms. In the view of geoid heights, we found large differences between the use of GLOBE and SRTM DEMs, in the range of −1.1 to 1 m for the study area. The terrain correction of the geoid model at selected GPS/levelling points only differs by 3 cm for these two DEMs.     

Extraction and validation of cartosat-1 DEM

CARTOSAT-1 satellite, launched in May, 2005 is a dedicated along track stereo mission providing high quality data for topographic and cartographic applications. The present paper describes the evaluation of the Cartosat-1 stereo data, mainly through the generation and validation of DEM for moderately undulating and hilly areas. Photogrammetric techniques have been used for generation of DEM and Orthoimage for two cases i.e. 1) using RPCs (Rational Polynomial Coefficients) and 2) using RPCs along with ground control points. Root Mean Square Error (RMSE) in elevation values for the moderately undulating (Dehradun) and hilly area (Shimla), are found to be 4.38 and 3.69m respectively.