海底油气集输管网的线性规划模型

本文对海上油田开发的油气集输管网系统进行了分析,提出了一个海底管网投资的线性规划模型,即“０～１”整数数学规划模型,运用图论和网络分析中的生成树方法对该数学模型进行求解。该方法能够对海底油气集输管网系统进行规划,并对一个具体实例进行了优化分析,得出了投资费用最省的管网布置方案。     

海底油气集输管网可靠性评估

对海底油气集输管网进行了可靠性评估，提出了一种适用于树状海底油气集输管网可靠性评价的方法，将流可靠度和单元重要度的概念引入到海底油气集输管网可靠性的分析中，该方法能够有效地评价海底油气集输管网的可靠性。     

海水、苦咸水反渗透淡化系统的模型及设计

基于过程系统综合的方法，对采用多级反渗透工艺的海水、苦咸水淡化系统的设计进行了研究。首先，建立1个包括所有可行设计方案的超结构模型，同时采用本文提出的膜组件模型来近似描述当中的反渗透单元的分离过程。该单元模型考虑了膜元件中的压降和浓差极化。然后给出了相关的经济模型，将投资费用、操作费用和设计变量相关联。以年费用最小为目标，将系统的设计问题表达为1个混合整数非线性规划（MINLP）。对此数学规划问题进行求解，可得到最优的反渗透结构，操作条件，以及每个压力容器中最恰当的膜元件数。对几个苦咸水淡化的实例进行设计，得到较高的产水率，吨水费用比没有进行结构优化的情况低10％-15％，表明这种方法是有效的。     

基于模拟退火算法的潜艇结构系统可靠性计算

针对结构系统可靠度计算中重要样本函数选择的困难，提出了应用模拟退火算法的自适应的重要样本法，并根据结构系统可靠性计算的特点，给出了适宜的模拟退火过程的冷却进度表。潜艇耐压结构系统可靠性分析的算例表明，本方法可有效地解决非线性失效方程的工程结构系统可靠度的计算问题。     

BZ19—4海底混输管网优化算法探讨

以海洋油气开发工程为实例，利用HYSYS和PIPEFLOW软件，分析了影响海底混输管网计算的若干因素，指出了HYSYS和PIPEFLOW的适用条件，最终确立了海底混输管网优化算法，提高计算效率。     

浸没式可移动外输终端系泊系统优化研究

我国的边际油田大多年产量小且开发年限短，周围没有可依托设施的油田。针对此情况，可采用“蜜蜂式”开发模式。针对浸没式可移动外输终端这一新型概念设计，选取关键工况开展了时域耦合分析，研究了系泊系统参数对可移动外输终端最大水平位移和系泊缆最大张力的影响。以可移动外输终端最大水平位移和系泊缆最大张力最小为优化目标，以系泊缆结构安全为约束条件，构建了系泊系统多目标优化模型。分别建立了基于NSGA-Ⅱ和多目标粒子群算法的系泊系统优化框架，并应用这两种算法对系泊系统进行了优化设计。结果表明，NSGA-Ⅱ和多目标粒子群算法均可以解决系泊系统多目标优化问题，粒子群算法优化速度快，但通过NSGA-Ⅱ得到的Pareto前沿优化性能更好，因此更适合开展浸没式可移动外输终端的系泊系统优化。     

城市地下管网信息系统研发实践

参考已建城市管网信息系统的经验，详述了研发的城市地下管网信息系统的重要功能及其实现，提出了城市地下管网系统研发中的关键问题与技术，并讨论了城市地下管网信息系统的发展方向。     

网络管理技术在海洋立体环境监测系统中的应用

对海洋环境立体监测系统中的网络管理问题 ,论述了网络管理方法对于海洋立体环境监测系统网络的管理技术 ,对如何有效地管理网络 ,如何为现有网络规划网络管理系统具有一定的意义     

地震作用下的导管架海洋平台结构动力优化设计研究

把导管架海洋平台看作钢框架结构，并把优化方法用于结构的抗震设计中；以结构的总重量最小为优化目标，导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。通过渤海BZ28—1油田储油平台为例进行了计算，计算结果表明，此方法对海洋平台的设计具有一定的参考意义。     

基于CDMA的海岸带地下水自动监测系统

针对当前海岸带地下水监测现场分散、采集费用高、分析和信息发布滞后等问题,基于CDMA无线传输技术、传感器技术、计算机技术,研制了海岸带地下水自动监测系统。系统通过探头传感器实时获取海岸带地下水矿化度、温度、压力等监测数据,通过自主研发的监控主机获取站点位置、视频图像、传感器电量,并基于CDMA网络和CDMA DTU无线数传模块实现远程传输、自动解析存储,通过网络在线服务软件进行数据的发布共享、设备异常报警和远程操控。系统具有传输效率高、稳定可靠、成本低、扩展灵活等特点,已经在山东半岛地区进行了部署,满足了对海岸带地下水自动监测数字化和网络化要求,有效地提高了该地区海岸带地下水监测工作质量和效率,可以为海岸带地区地下水资源实时监测及管理提供服务。重点介绍了系统总体结构、无线传输方式、现场监测设备及远程监控平台,同时介绍了系统扩展性及安全性设计。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.