中国中西部盆地海相白云岩主要形成机制与模式

塔里木、四川及鄂尔多斯盆地是中国中西部海相白云岩的主要发育地区。三大盆地重点层系海相白云岩新近的成因研究表明,大规模准同生白云岩和埋藏成因白云岩的发育均与蒸发台地密切相关。蒸发台地中由海水浓缩形成的富Mg~(2+)卤水一方面在准同生期,通过蒸发泵和下渗机制交代碳酸钙沉积物而形成与蒸发岩共生的准同生白云岩,另一方面作为富含Mg~(2+)的地层孔隙水,在准同生-浅埋藏期乃至中、深埋藏期,通过侧向渗透、侧向与垂向压实排挤和垂向热对流机制与粗结构的碳酸钙沉积物发生交代反应,在蒸发岩系周边和上下形成广泛分布的埋藏成因白云岩。与热流体作用有关的白云石化主要依靠构造断裂、裂缝、不同级次的层序界面、孔洞层等输导体系发生,分布较局限。热流体云化常表现为对先期白云岩进行叠加改造而形成热水改造白云岩。热流体性质不一,可以是深埋藏混合热水、深部循环水、地幔深部的岩浆热液等。白云石(岩)的生物成因不仅表现为微生物作用导致白云石直接沉淀,还表现为生物的存在与活动为白云石化作用提供Mg~(2+)和云化流体通道。由微生物和宏观藻释放出Mg~(2+),在埋藏期对方解石进行交代是各种富含藻类的灰岩中部分白云石的重要形成机制。生物扰动可明显改善岩石的孔渗性,从而显著促进白云石化作用的发生。     

Burial dolomitization and porosity development in a mixed carbonate-clastic sequence: an example from the Bowland Basin, northern England

Widespread dolomitization and leaching occur in the Asbian to Brigantian (Dinantian) sequence of the Bowland Basin. Within this mudrock-dominated succession, dolomite is developed in calcarenites and limestone breccia/conglomerates deposited in a carbonate slope environment (Pendleside Limestone) and also within graded quartz wackes deposited by density currents in a generally ‘starved’ basin environment (Pendleside Sandstone). The dolomitized intervals range in thickness from less than one metre to several tens of metres and have a stratabound nature. All stages of calcite cement pre-date dolomitization and calcite veins are dolomitized. Dolomite crystals replace neomorphic spar and may also contain insoluble residues that were concentrated along stylolites. Thus dolomitization was a late stage process within the carbonate diagenetic sequence. A late-stage diagenetic origin is also indicated within the sandstones, with dolomite post-dating the development of quartz overgrowths. Six main textural styles of dolomite are observed: (1) scattered; (2) mosaic; (3) subhedral to euhedral rhombic; (4) microcrystalline; (5) single crystal and (6) saddle. The style of dolomite developed is dependent on the host rock mineralogy, on whether it is space-filling or replacive and also on temperature. Chemically the dolomite varies from near stoichiometric compositions to ankeritic varieties containing up to 20 mole % FeCO₃. Generally the dolomites have isotopic compositions depleted in δ¹⁸O compared to the host limestone, with similar or lighter δ¹³C values. Initial dolomite was of the scattered type, but with progressive replacement of the host a mosaic dolostone with a sucrosic texture was produced. There was a general increase in the Fe and Mn content and reduction in δ¹⁸O ratio of the crystals during dolomitization. Leaching is restricted to partly dolomitized horizons, where calcite, feldspars, micas, clays and, to some extent, dolomite have been leached. This has produced biomouldic and vuggy secondary porosity within the carbonates, whereas in the sandstones honeycombed, corroded and floating grains associated with oversized pores occur. Porosity within both carbonates and sandstones is reduced by ferroan dolomite/ankerite cements. Field, petrographic and chemical characteristics indicate that dolomitizing solutions were predominantly derived from the enclosing mudrocks (Bowland Shales) during intermediate/deep burial. Fluid migration out of the mudrocks would have been sided by dehydration reactions and overpressure, the fluids migrating along the most permeable horizons—the coarse grained carbonates and sandstones that are now dolomitized and contain secondary porosity.     

Petrography and geochemistry of early-stage, fine- and medium-crystalline dolomites in the Middle Devonian Presqu'ile Barrier at Pine Point, Canada

The petrography and geochemistry of fine- and medium-crystalline dolomites of the Middle Devonian Presqu’ile barrier at Pine Point (Western Canada Sedimentary Basin) are different from those of previously published coarse-crystalline and saddle dolomites that are associated with late-stage hydrothermal fluids. Fine-crystalline dolomite consists of subhedral to euhedral crystals, ranging from 5 to 25 μm (mean 8 μm). The dolomite interbedded with evaporitic anhydrites that occur in the back-barrier facies in the Elk Point Basin. Fine-crystalline dolomite has δ¹⁸Ο values between ?1·6 to –3·8‰ PDB and ⁸⁷Sr/⁸⁶Sr ratios from 0·7079–0·7081, consistent with derivation from Middle Devonian seawater. Its Sr concentrations (55–225 p.p.m., mean 105 p.p.m.) follow a similar trend to modern Little Bahama seawater dolomites. Its rare earth element (REE) patterns are similar to those of the limestone precursors. These data suggest that this fine-crystalline dolomite formed from Middle Devonian seawater at or just below the sea floor. Medium-crystalline dolomite in the Presqu’ile barrier is composed of anhedral to subhedral crystals (150–250 μm, mean 200 μm), some of which have clear rims toward the pore centres. This dolomite occurs mostly in the southern lower part of the barrier. Medium-crystalline dolomite has δ¹⁸O values between ?3·7 to ?9·4‰ PDB (mean ?5·9‰ PDB) and ⁸⁷Sr/⁸⁶Sr ratios from 0·7081–0·7087 (mean 0·7084); Sr concentrations from 30 to 79 p.p.m. (mean 50 p.p.m.) and Mn content from 50 to 253 p.p.m. (mean 161 p.p.m.); and negative Ce anomalies compared with those of marine limestones. The medium-crystalline dolomite may have formed either (1) during shallow burial at slightly elevated temperatures (35–40 °C) from fluids derived from burial compaction, or, more likely (2) soon after deposition of the precursor sediments by Middle Devonian seawater derived from the Elk Point Basin. These results indicate that dolomitization in the Middle Devonian Presqu’ile barrier occurred in at least two stages during evolution of the Western Canada Sedimentary Basin. The geochemistry of earlier formed dolomites may have been modified if the earlier formed dolomites were porous and permeable and water/rock ratios were large during neomorphism.     

Genesis of Dolomite from Ma55–Ma510 Sub-members of the Ordovician Majiagou Formation in the Jingxi Area in the Ordos Basin

We clarified three stages of dolomitization and secondary changes by studying the petrology and geochemistry characteristics of dolomite from the Ma55–Ma510 sub-members of the Ordovician Majiagou Formation in the Jingxi area in the Ordos Basin: (1) Syngenetic microbial dolomitization is characterized by formation of dolomite with a mainly micrite structure and horse tooth-shape dolomite cements. (2) Seepage reflux dolomitization during the penecontemporaneous period superposed adjustment functions such as recrystallization and stabilization in the middle-deep burial stage, forming dolomites mainly consisting of micro crystal and powder crystal structure. (3) Powder dolomite, fine dolomite, and medium-coarse crystalline dolomite formed in pores and fractures in the middle-deep burial stage. The secondary concussive transgression-regression under a regressive background is an important condition for the occurrence of many stages of dolomitization in the study area. The basin was an occlusive epicontinental sea environment in the Ma5 member of the Ordovician Majiagou Formation sedimentary period. In the sediments, sulfate content was high, which is conducive to the preservation of microbial activity and microbial dolomitization. Micritic dolomite formed by microbial dolomitization provides good migration pathways for seepage reflux dolomitization. Affected by evaporation seawater with increased Mg/Ca ratio, seepage reflux dolomitization was widely developed and formed large-scale dolomite, and underwater uplifts and slopes are favorable areas for dolomite. In the middle-deep burial stage, dolomitizing fluid in the stratum recrystallized or stabilized the previous dolomite and formed a small amount of euhedral dolomite in the pores and fractures.     

川东北二叠系长兴组碳酸盐岩深埋成岩过程及其意义

上二叠统长兴组储层是川东北地区主力产层之一,储层岩性主要为结晶白云岩、残余生屑/砂屑白云岩、生物礁白云岩和亮晶生屑灰岩,储集空间以晶间孔、晶间溶孔为主,生物体腔孔、残余粒间孔次之,溶洞和裂缝少量发育。长兴组优质储层主要分布于台地边缘生物礁、台地边缘滩等沉积相带,该相带发育大量原生孔隙,易遭受大气淡水溶蚀改造。原生孔隙的发育为白云岩化流体与岩石相互作用提供空间,早期孔隙演变为晶间孔。白云岩抗压实能力较强,有利于高孔隙白云岩的保存。早三叠世快速深埋使长兴组迅速进入中深埋藏,深埋阶段,裂缝少量发育,部分被方解石充填,对储层贡献有限。晚三叠世油气充注隔绝了岩石与地层水的接触,抑制了孔隙内白云石的溶蚀和沉淀,储层先存孔隙得到较好的保存。快速深埋使孔隙迅速被埋藏封闭,深埋阶段水-岩反应处于近封闭的平衡状态,溶蚀-沉淀现象有限,深埋藏环境主要是储层孔隙保存和调整的场所,孔隙空间的位置可能重新分配。     

Multiphase partial and selective dolomitization of Carnian reef limestone (Transdanubian Range,Hungary)

Partially dolomitized carbonate successions provide a good opportunity to understand the commonly multistage process of dolomitization. Petrographic methods, fluid inclusion microthermometry and stable isotope measurements were applied to reconstruct the diagenetic evolution and dolomitization of a partially dolomitized Carnian reef limestone from the Transdanubian Range, Hungary. The diagenetic history began with reef diagenesis and formation of dolomite micro‐aggregates in microbial fabric elements; this was followed by the development of euhedral porphyrotopic dolomite crystals through overgrowths around the previously formed dolomite micro‐aggregates during the earliest burial stage. Increasing burial resulted in the extension of the dolomite patches via formation of finely crystalline replacement dolomite. From the Late Norian, when the Carnian reef carbonates reached the depth of 1·0 to 1·8 km, the diagenetic evolution continued in an intermediate to deep‐burial setting. Contemporaneously, an extensional regime was established, leading to fracturing. The progressive burial resulted in the recrystallization of the pre‐existing dolomite with increasing temperature, while saddle dolomite cement was precipitated in fractures. In connection with the Alpine Orogeny, intense denudation took place during the Late Cretaceous, accompanied by fracturing. Similar tectonically controlled denudation and fracturing occurred in several stages during the Cenozoic. As a result of these processes, the studied Carnian carbonates were raised to a near‐surface position or became subaerially exposed, leading to dedolomitization of the last dolomite phase and precipitation of calcite cement in cavities and fractures. This study revealed that by investigating partially and selectively dolomitized rock types, it is possible to document and understand those stages of the multiple dolomitization process which can barely be detected in the completely dolomitized rock bodies. Recognition of the dolomitization phases could provide the basis for the analysis of their relations with the depositional, diagenetic and tectonic processes, and stages of basin evolution.     

The role and impact of freshwater–seawater mixing zones in the maturation of regional dolomite bodies within the proto Floridan Aquifer, USA

Palaeogene dolostones from the sub‐surface of Florida are ideal for the study of dolomite maturation because they record the early stages of a secondary dolomite overprint without destruction by later diagenetic overprints. Two distinct dolomite textures occur in the dolostones of the Upper Eocene Ocala and Lower Oligocene Suwannee limestones in west‐central Florida: a porous and permeable sucrosic dolomite and a less porous and relatively impermeable indurated non‐sucrosic dolomite. In both textures, the initial matrix dolomite is dully luminescent, whereas the secondary overprint is dominantly luminescent cement in the Suwannee and only neomorphic luminescent dolomite in the Ocala. The abundance of luminescent dolomite ranges from 2% to 38%, which translates to 1·6 km³ of material in the Suwannee and 13·5 km³ in the Ocala. Extrapolated trace‐element contents (Sr and Na) and δ¹⁸O values for the matrix and luminescent end‐members indicate a marine origin for the matrix dolomite in both units, and a freshwater–seawater mixing‐zone origin for the secondary luminescent dolomites. The δ¹⁸O values indicate that a saline, middle mixing‐zone environment overprinted the Suwannee but a more dilute mixing zone affected the Ocala. Fluid–fluid mixing models constrained by modern Floridan aquifer hydrochemistry and extrapolated ⁸⁷Sr/⁸⁶Sr values of the luminescent phases indicate that the mixing zones operated during the Late Miocene to Pliocene in the Ocala and affected the Suwannee in the Pliocene. The luminescent Suwannee mixing‐zone cement reduced porosity up to threefold and permeability up to 100‐fold, which converted many sucrosic dolomites to indurated dolomites. By contrast, the neomorphic luminescent Ocala dolomite did not have an appreciable impact on the maturations. Although freshwater–seawater mixing zones were not the sites of the initial dolomitization, the mixing‐zone environment did dramatically overprint and mature the regionally widespread dolomites of the Ocala and Suwannee limestones. This maturation occurred shortly after formation of the proto‐Floridan aquifer; the timing suggests the matrix dolomites were ‘ripe’ for alteration and that the only prerequisite for mixing‐zone dolomite is pre‐existing dolomite substrates to reduce kinetic barriers. In contrast to recent claims, the results of this study demonstrate that mixing zones can be effective in forming regionally significant amounts of secondary dolomite and influencing the petrophysical maturation of dolomite bodies.     

华北秦皇岛地区柳江盆地马家沟组碳酸盐岩多期白云化作用

华北秦皇岛地区的中奥陶统马家沟组以广泛发育海相白云质灰岩、灰质白云岩和白云岩为特征。在石门寨奥陶系亮甲山剖面,马家沟组自下而上识别出四类碳酸盐岩:含白云石泥晶灰岩（类型I）、细-粉晶白云岩（类型II）、“麦粒状”细-粉晶白云岩（类型III）和钙质泥晶白云岩（类型IV）。类型I主要由泥晶方解石构成,含三叶虫和介形类生物碎片,少量自形的粉晶白云石呈“漂浮状”分布于压溶缝合线内,基质中少见。岩相学和地球化学特征表明此类白云石形成于埋藏成岩期压溶作用之后,压溶缝为云化流体提供通道,压溶缝内泥质组分的成岩转化可能为白云化作用提供了部分镁离子来源;类型II白云岩主要由自形、半自形不等粒粉晶-细晶白云石构成,白云石普遍具有“雾心亮边”,在背散射和阴极发光照片中白云石可见清晰的多圈亮、暗相间环带。环带和带间主量元素的差异表明白云石经历了埋藏成岩期多期成岩流体的改造;类型III白云岩中白云石呈单向延伸的“米粒”或“麦粒”状,粉晶为主,晶体长轴方向具有垂直结晶轴c的特点,白云石具富铁、贫锰、锶的特点,长、短对角线上钙、镁离子的微小差异以及阴极发光特征表明此类白云石也经历了埋藏成岩期的改造,成岩流体使白云石发生微溶作用可能是导致白云石晶体单向延伸且光学性质固定取向的主要原因;类型IV为钙质泥晶球粒白云岩,含石膏假晶,白云石多为微晶和微亮晶,球粒也多由微晶白云石构成,溶孔发育,但全被亮晶贫铁方解石充填,此类岩石的白云化作用发生得很早,可能形成于潮上带澙湖或潮坪环境。综上所述,研究区马家沟组碳酸盐岩具有经历了不同类型及多期白云化作用的特点。自剖面底部向顶部,白云石的有序度由0.8降至0.47,而去云化作用则呈现逐渐增强的趋势。     

Characteristics and Dolomitization of Upper Cambrian to Lower Ordovician Dolomite from Outcrop in Keping Uplift, Western Tarim Basin, Northwest China

Late Cambrian to Early Ordovician sedimentary rocks in the western Tarim Basin, Northwest China, are composed of shallow-marine platform carbonates. The Keping Uplift is located in the northwest region of this basin. On the basis of petrographic and geochemical features, four matrix replacement dolomites and one type of cement dolomite are identified. Matrix replacement dolomites include (1) micritic dolomites (MD1); (2) fine–coarse euhedral floating dolomites (MD2); (3) fine–coarse euhedral dolomites (MD3); and (4) medium–very coarse anhedral mosaic dolomites (MD4). Dolomite cement occurs in minor amounts as coarse saddle dolomite cement (CD1) that mostly fills vugs and fractures in the matrix dolomites. These matrix dolomites have δ18O values of ?9.7‰ to ?3.0‰ VPDB (Vienna Pee Dee Belemnite); δ13C values of ?0.8‰ to 3.5‰ VPDB; 87Sr/86Sr ratios of 0.708516 to 0.709643; Sr concentrations of 50 to 257 ppm; Fe contents of 425 to 16878 ppm; and Mn contents of 28 to 144 ppm. Petrographic and geochemical data suggest that the matrix replacement dolomites were likely formed by normal and evaporative seawater in early stages prior to chemical compaction at shallow burial depths. Compared with matrix dolomites, dolomite cement yields lower δ18O values (?12.9‰ to ?9.1‰ VPDB); slightly lower δ13C values (?1.6‰–0.6‰ VPDB); higher 87Sr/86Sr ratios (0.709165–0.709764); and high homogenization temperature (Th) values (98°C–225°C) and salinities (6 wt%–24 wt% NaCl equivalent). Limited data from dolomite cement shows a low Sr concentration (58.6 ppm) and high Fe and Mn contents (1233 and 1250 ppm, respectively). These data imply that the dolomite cement precipitated from higher temperature hydrothermal salinity fluids. These fluids could be related to widespread igneous activities in the Tarim Basin occurring during Permian time when the host dolostones were deeply buried. Faults likely acted as important conduits that channeled dolomitizing fluids from the underlying strata into the basal carbonates, leading to intense dolomitization. Therefore, dolomitization, in the Keping Uplift area is likely related to evaporated seawater via seepage reflux in addition to burial processes and hydrothermal fluids.     

塔里木盆地中央隆起中部中下奥陶统白云石类型及形成机理

根据岩心及薄片观察,按照矿物晶体的大小、形状以及自形程度的差异,将塔里木盆地中央隆起中部中下奥陶统碳酸盐岩地层中的白云石分为6种类型,包括泥微晶白云石、粉—细晶自形—半自形漂浮状白云石、粉—细晶半自行—他形白云石、粉—细晶自形(环带)白云石、细—粗晶他形白云石、粗晶鞍形白云石。综合不同类型白云石的结构特征、碳氧锶同位素值、阴极发光等特征,认为中下奥陶统白云石主要由三种成岩作用形成:泥微晶白云石主要是在准同生期由回流白云石化形成;大部分粉—粗晶白云石是在埋藏期由埋藏白云石化形成,其中浅埋藏期是大规模白云石化的阶段;粗晶鞍形白云石主要由与高温热液活动相关的热液白云石化形成。     

塔里木盆地中央隆起区寒武-奥陶系白云岩结构特征及成因探讨

白云岩研究的关键在于对白云石化作用的理解,而岩石结构作为白云石化作用分析的基础,不仅对白云岩的成因具有指示意义还深刻地影响着白云岩储层的质量。通过岩芯、薄片、扫描电镜、阴极发光以及碳、氧、锶同位素等测试手段,结合国际上常用的分类术语,对塔里木盆地中央隆起区寒武-奥陶系白云岩按结构进行了分类,并探讨了不同结构类型与其成因之间的关系。研究表明,白云岩结构与其形成环境和形成过程密切相关,其中保留原始结构的白云岩（包括泥-粉晶白云岩和颗粒白云岩）属于同生或准同生阶段、与蒸发海水有关的拟晶白云石化作用的产物,大量过饱和白云石化流体的通过有利于原始结构的保存;晶粒白云岩中,具有平直晶面结构的细晶、自形白云岩和细晶、半自形白云岩与浅埋藏成岩阶段的低温白云石化作用有关,云化流体以轻微蒸发的海源流体为主,浅埋藏晚期的过度白云石化作用导致晶体由平面-自形向平面-半自形转化;中-粗晶、他形白云岩是中或深埋藏成岩阶段的高温/热液白云石化或重结晶作用的结果,较高的形成温度导致晶体发生曲面化。     

川东北罗家寨气田下三叠统飞仙关组鲕粒滩成岩作用

四川东北部罗家寨气田的储层为下三叠统飞仙关组孔隙性鲕粒白云岩。其沉积相属碳酸盐台地的鲕粒滩微相，为台地潮下较高能环境沉积，主要受潮汐作用的控制。原生岩石为亮晶鲕粒石灰岩和泥晶鲕粒石灰岩，白云石化作用使其岩石结构大多遭受破坏。对储层起建设性作用的成岩作用主要有白云石化作用、埋藏溶解作用。白云石化作用是形成优质储层的基础。埋藏溶解作用主要在粒间半充填剩余缝隙、交代白云石的晶间孔内进行，这进一步溶蚀造就了大量超大孔隙、粒间溶孔、粒内孔、铸模孔等。对储层起到破坏作用的主要是充填作用，表现为次生溶蚀孔隙、裂缝、溶洞中充填自生矿物，它们的包裹体测温数据证明充填作用发生在埋藏时期。各种自生矿物充填的不均匀性揭示了岩石与孔隙水之间相互作用的复杂性，以及岩溶水在不同时期是变化的。     

塔河地区鹰山组灰岩白云石化成因及其对储层的影响

白云石化是碳酸盐典型的成岩作用类型之一,中-下奥陶统鹰山组浅海碳酸盐岩是塔河地区重要的含油气储层,普遍发育多种类型的白云石化作用。本文针对塔河地区鹰山组灰岩中沿缝合线分布这一特定类型的白云石化进行了研究。岩石学基础上的阴极发光分析、⁸⁶Sr/⁸⁷Sr比值以及δ¹³C-δ¹⁸O 的研究表明,这种类型的白云石化发育于相对还原的浅埋藏成岩环境,孔隙中的残留海水是主要的白云石化流体来源,碳酸盐矿物(主要是高镁方解石)稳定化过程中释放的Mg²⁺ 可能是白云石化主要的物质来源,而埋藏过程中逐渐升高的温度一定程度上也促进了白云石化的发生。成岩流体及Mg²⁺ 有限的供给量限制了白云石化作用的整体规模。显微结构与岩石物性分析表明,该类白云石化对储层物性参数的绝对贡献相对有限,但可能成为小规模油气运移以及深部热流体活动的潜在通道。     

中扬子台地北缘灯影组白云岩研究

研究区白云岩成因类型可划分出准同生白云石化、回流渗透白云石化、混合水白云石化、压溶白云石化和埋藏白云石化。本文详细研了各成因类型的白云岩矿物岩石学特征和地球化学特征，重点探讨了埋藏白云石化Ｍｇ２＋来源及其搬运机理。认为埋藏白云石化Ｍｇ２＋来自粒间残留古海水，迁移机制与地下异常高压孔隙流体的驱动和襄樊－广济同沉积断裂的活动有关。五类白云岩中以混合水白云石化和埋藏白云石化的岩石类型储集性能最好。     

Hydrothermal dolomitization in a complex geodynamic setting (Lower Palaeozoic,northern Spain)

Burial hydrothermal dolomitization is a common diagenetic modification in sedimentary basins with implications for oil and gas reservoir performance. Outcrop analogues represent an easily accessible source of data to refine the genetic models and assess risk in hydrocarbon exploration and production. The Palaeozoic succession of northern Spain contains numerous excellent exposures of epigenetically dolomitized limestones, particularly in the Carboniferous and Cambrian. The epigenetic dolomites in the Cambrian carbonates of the Láncara Formation are volumetrically small, but have a large aerial distribution across different tectonic units of the Variscan fold and thrust belt. Coarse crystals, abundant saddle dolomite cement, negative δ¹⁸O and fluid inclusion homogenization temperatures between 80°C and 120°C characterize these dolomites, which are petrographically and geochemically similar to the tens of kilometre‐sized hydrothermal dolomites replacing the Upper Carboniferous succession in the same area. In both cases, the dolomitizing fluids are derived from highly evaporated sea water, modified to a limited degree through fluid‐rock interaction. The dolomitization events affecting both Cambrian and Carboniferous strata are probably related to the same post‐orogenic hydrothermal fluid flow. The formation of the post‐collisional (latest Carboniferous) Cantabrian arc fostered dolomitization: the extension related to bending of the arc generated deep‐reaching faults and strike‐slip movements, which favoured the circulation of hot dolomitizing fluids in the outer parts of this orocline. A similar dolomitization process affected other areas of Europe after the main stages of the Variscan orogeny. Dolomitization was a continuous, uninterrupted, isochemical process. Limestone replacement resulted in a major porosity redistribution and focused the fluid flow into the newly created porous zones. Replacement was followed immediately by partial to complete cementation of the pores (including zebra fabrics and vugs) with saddle dolomite. The amount of porosity left depends on the volume of cement and therefore on the volume of fluids available.     

四川盆地西部中二叠统白云岩/石的主要结构类型——兼论其与川东北上二叠统—三叠系白云岩/石的差异

白云岩/石的结构在白云岩成因研究中具有重要意义。四川盆地西部中二叠统栖霞组的白云岩具有与盆地东北部上二叠统长兴组-三叠系不同的结构:盆地西部中二叠统栖霞组除存在一部分斑状晶白云岩以外,总体上缺乏原始结构保存的白云岩,白云石具有特征的非平直晶面他形晶和鞍形晶,且晶体较大;盆地东北部上二叠统长兴组-三叠系非常发育原始结构保存的白云岩,结晶白云岩也以晶体较小的平直晶面自形晶-半自形晶为主。对碳酸盐岩中白云石含量的分布模式而言,盆地西部中二叠统栖霞组出现频率最高的是白云石含量40%~60%的过渡岩石类型,这是一种非经典的分布模式,而盆地东北部上二叠统长兴组-三叠系则缺乏这样的过渡岩石类型,出现频率最高的是白云石含量大于90%和小于10%的端元岩石类型,这是一种经典的分布模式。白云岩/石的结构特征的差异反映盆地西部中二叠统栖霞组白云岩较高的结晶温度、较低的流体Mg/Ca比值、较短的白云化作用持续时间和不彻底的回头白云化作用;盆地东北部上二叠统长兴组-三叠系则主要是相对低温的,高Mg/Ca比值海源流体的彻底白云化作用。     

川中磨溪—高石梯地区栖霞组白云岩特征及成因机制

川中磨溪—高石梯地区栖霞组发育滩相白云岩,目前对滩相中差异白云石化机理不明确,导致难以预测优质白云岩储层的分布。在岩石学和地层特征研究基础上,通过分析不同类型白云岩的微量元素及碳、氧、锶同位素特征,结合颗粒滩类型和构造背景,系统研究了该区不同类型白云岩的成因机理及模式。结果显示:研究区栖霞组白云岩中白云石以细晶为主,中晶和粗晶次之,晶形多为半自形—自形。白云岩具有明显的残余颗粒结构,表明原始岩性为颗粒灰岩。细晶、细—中晶白云岩的阴极发光整体较暗,呈暗红色至红色,稀土元素配分模式与同期灰岩相似,白云岩的87Sr/86Sr比值大部分落于二叠纪海水的87Sr/86Sr比值范围之内,表明白云岩的成岩流体与海水沉积的灰岩具有同源性。白云岩的δ13C值（3.73‰~4.19‰）与同期灰岩δ13C值（3.61‰~4.93‰）相近,表明白云岩与灰岩具有一致的碳源。从灰岩到白云岩,Sr含量明显减少且Mn含量有所增加,说明灰岩经过一定的成岩作用被交代形成白云岩,该类白云岩为埋藏条件下地层中富Mg2+的流体交代孔隙型颗粒灰岩而成;中—粗晶白云岩的阴极发光呈红色,具明显环带特征,且具有高的Mn含量、低Sr/Ba比值及铕的正异常,87Sr/86Sr比值高于同期海水值,δ18O值在-8.06‰~-8.52‰,为颗粒灰岩在埋藏期受持续、充足的云化流体供给而成,较高的包裹体均一温度和δ18O值明显偏负均指示埋藏白云化作用过程还受到局部高温的影响。总体而言,埋藏白云岩化是该区白云岩的主要成因,地层中富镁的流体在压力和热对流的双重影响下进行迁移,促进白云岩化流体的运移,但局部地区鞍形白云石的形成遭受了后期不同程度的热液改造作用。     

Late Pleistocene mixing zone dolomitization, southeastern Barbados, West Indies

ABSTRACT Field, geochemical, and petrographic data for late Pleistocene dolomites from southeastern Barbados suggest that the dolomite precipitated in the zone of mixing between a coastal meteoric phreatic lens and normal marine waters. The dolomite is localized in packstones and wackestones from the algalAmphistegina fore-reef calcarenite facies. Stable isotopic evidence suggests that meteoric water dominated the diagenetic fluids responsible for dolomitization. Carbon isotopes in pure dolomite phases average about -15%₀ PDB. This light carbon is attributed to the influence of soil gas CO₂, and precludes substantial mixing with seawater. A narrow range of oxygen isotopic compositions coupled with a wide range of carbon compositions attest to the meteoric diagenetic overprint. Dolomitization likely occurred with as little as a five per cent admixture of seawater. Strontium compositions of the dolomites indicate probable replacement dolomitization of original unstable mineralogy. The dolomite is characterized by low sodium values. Low concentrations of divalent manganese and iron suggest oxidizing conditions at the time of dolomitization. A sequence of petrographic features suggests a progression of diagenetic fluids from more marine to more meteoric. Early marine diagenesis was followed by replacement dolomitization of skeletal grains and matrix. Limpid, euhedral dolomite cements precipitated in primary intra- and interparticle porosity subsequent to replacement dolomitization. As waters became progressively less saline, dolomite cements alternated with thin bands of syntaxial calcite cement. The final diagenetic phase precipitated was a blocky calcite spar cement, representing diagenesis in a fresh-water lens. This sequence of diagenetic features arose as the result of a single fall in eustatic sea-level following deposition. A stratigraphic-eustatic-diagenetic model constrains both the timing and rate of dolomitization in southeastern Barbados. Dolomitization initiated as sea-level began to fall immediately following the oxygen isotope stage 7–3 high stand, some 216 000 yr bp . Due to the rapidity of late Pleistocene glacio-eustasy, dolomitization (locally complete) is constrained to have occurred within about 5000 yr.     

塔里木盆地塔中地区下奥陶统白云岩成因

塔里木盆地塔中地区下奥陶统白云岩广泛发育,岩石类型复杂多样,主要包括结晶白云岩、残余颗粒白云岩、残余灰质白云岩、藻云岩、亮边雾心白云岩、环带白云岩及少量膏云岩等结构类型。白云岩交代现象明显,δ18O普遍为中—高负值（-3.2‰～-8.7‰）;δ13C值基本为低中负值（-3‰～-0.77‰）,Z值大多集中在118～123...