A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

一种带自由面的三维船体贴体网络的数值生成

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的     

止水帷幕在高层建筑深基坑中的应用

某高层建筑基坑西侧紧邻一道河沟,水量较大,采取三重管高压摆喷帷幕止水[1～4],施工完成后通过监测,未发现渗漏、地下水位明显下降和周围建筑物沉降现象。     

地震相和测井相联合预测火山岩相分布特征研究

以火山岩的基本地质特征、测井特征与测井相及其地震相特征与地震相分类为基础,依据测井相所建立的火山岩相模式,时地震相进行标定,形成由火山岩相、测井相和地震相组成的"三相"技术.该技术建立起"三相"之间的对应关系,以揭示火山岩相空间展布规律及变化特征.将"三相"技术应用于某盆地北部地区的营城组火山岩相研究.把营城组一段的地震相转换成火山岩相,得到火山岩相的平面分布,有效地预测出某盆地北部地区营城组一段火山岩的空间展布规律和火山岩储层有利相带.钻井证实:火山岩相之通道相岩石的物性最好,侵出相和爆发相次之,火山沉积相最差;火山岩相以火山颈岩物性最好,溢流相顶部次之.     

帷幕灌浆中三序变两序施工的工效及成果比较

在选定的试验区内同时分两序和三序进行施工,以确定帷幕灌浆两序施工的合理性,并与三序施工进行工效及成果对比。     

增强解析信号技术的应用条件

用直立长方体的磁模型对三维解析信号方程进行了研究,结果表明;三维解析信号方程是一个近似的关系式,其近似程度与磁源的几何参数有关.用增强解析信号技术计算磁源埋深和磁源边界位置的误差依赖于磁源的水平尺度与其顶面埋深的比值.     

基于GMS的三维TOUGH2模型及模拟

GMS和TOUGH2均是应用广泛的地下流动系统数值模拟软件,其中,GMS界面友好,功能强大;而TOUGH2虽具有强大的数值计算能力,但缺乏友好的可视化前后处理界面。本文借助GMS强大的前处理能力,基于概念模型建立了三维复杂模型,把GMS/MODFLOW三维数值模型(包括网格数据、岩性数据、初始和边界数据等)转化为TOUGH2数值模型进行数值计算。通过两个计算实例(含水层水平没有起伏和有起伏)对比分析了GMS/MODFLOW和TOUGH2计算结果的差异。结果显示,该方法可以快速地建立刻画复杂地质条件的TOUGH2模型,计算结果与GMS/MODFLOW差异很小,说明两个软件均有很高的可信度;同时,该方法发挥了两个软件各自的优势,为进行更为复杂的多相流动数值模拟提供了可行性。     

一次冬季降雹过程的CINRAD/SA回波特征

利用新一代天气雷达 (CINRAD/SA)对 2 0 0 2年 1 2月 1 9日一次冬季降雹观测资料进行分析 ,从中得出冬季降雹的回波特征 ,并对这次过程中出现的三体散射现象及相应的雷达产品做初步分析 ,得出“三体”散射现象是降大雹的一指示性标志和降雹的一些雷达产品指标。     

基于GTP的地下工程与围岩一体化真三维空间构模

针对地下工程开挖体的基本特征及其真三维建模要求，在广义三棱柱(GTP)模型的基础上进行扩展，提出采用E—GTP模型来构建地下工程开挖体的真三维模型。通过与其围岩地质体的G—GTP模型的耦合，实现了基于GTP的工程开挖体与围岩地质体的一体化建模。该模型将地下三维空间实体抽象为点、线、面、体四类对象，通过结点、TIN边、侧边、TIN面、侧面和GTP体元共6个基本几何元素进行统一表达。该文重点讨论了E—GTP的建模原理与方法，并介绍了基于面向对象思想的一体化空间数据结构。