Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

A note on turbulent perturbations of salinity in a partially mixed estuary

Measurements of salinity perturbations in a partially mixed estuary have been used to evaluate the usefulness of an inductive salinometer and to determine some of the characteristics of the salinity perturbations. The salinometer performed satisfactorily under most conditions. Although internal wave like effects were present, the turbulence fluctuations were dominant. The salinity fluctuations and the turbulent fluxes $\text{sw}$ and $\text{su}$ were found to behave in a manner similar to the density fluctuations in a thermally stratified atmospheric boundary layer and a laboratory open channel flow. A quadrant analysis suggested that the contribution of each quadrant to the turbulent flux changed with Ri. The turbulence parameters ν and c_γ were found to decrease and increase respectively as Ri increases.     

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

海洋钢筋混凝土结构牺牲阳极保护系统电极行为的研究

于１９８９－１９９０年在室内条件下，用牺牲阳极保护浸泡于海水中的多种钢筋凝土试件测试不同试件中钢筋极化与阳极布局、涂层质量，涂层厚度及试件浸水情况的关系。结果表明，牺牲阳极能有效地保护全浸海水中的混凝土试件，对间断浸淋海水的试件也有一定的保护作用，通过改善阳极安装工艺，保护作用可望提高；电偶电流在各阴阳极上的分布将随涂层质量，涂层厚度和试件浸水情况不同而异，回路中电阻和电极极化情况是影响电流分布的     

GPS测高技术在无验潮水深测量中的应用

应用双频GPS动态后处理高精度定位技术，建立了一套完整的GPS无验潮海洋深度测量作业模式，通过海上试验与传统作业模式作了数值分析比较，结果表明，该作业模式不仅无需验潮，而且能够有效消除传统作业模式中船只动态吃水和涌浪等因素对测量成果的影响，显著提高水深测量成果的精度。     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

单体褶牡蛎(Crassostrea sp.)的研究

采用肾上腺素(EPI)和去甲肾上腺素(NE)诱导、颗粒固着基和先固着后脱基三种方法,对褶牡蛎的眼点幼虫进行处理,产生单体蛎苗。EPI和NE诱导的最适浓度为10~(-4)M,最适处理时间为3h,幼虫的不固着变态率分别达47.7％和46.6％。处理时间延长,变态率增加不明显。EPI和NE的诱导效果差别不明显,其诱导作用对稚贝的生长无明显副作用。颗粒固着基以贝壳粉为佳,最适颗粒的规格为幼虫的壳长。幼虫先固着后脱基而形成单体蛎苗,以可弯曲的灰色塑料板效果最好,固着的小贝可通过来回弯曲塑料板而从上面脱落下来,小贝长至1～2cm大小时,脱基最容易。     

沿海新建混凝土建筑的耐久性

分析了沿海混凝土建筑因耐久性不足而导致破坏的原因，提出了预防措施。     

桩锚支挡体系在广西寨-任二级公路高边坡治理工程中的应用

(六)寨-(水)任二级公路施工后,滑坡、坍塌、崩塌现象甚多,边坡治理迫在眉睫。桩锚支挡体系是一项主动性加固边坡技术,具结构轻巧、用材合理、施工简单、工期短、费用低等特点。论文通过其在(六)寨-(水)任二级公路K56段高边坡治理工程中的应用,对桩锚支挡体系的设计及施工要点作了介绍。