The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

The 550-au Mission: a critical discussion

We have studied the science rationale, goals and requirements for a mission aimed at using the gravitational lensing from the Sun as a way of achieving high angular resolution and high signal amplification. We find that such a mission concept is compromised by several practical problems. Most severe are the effects due to the plasma in the solar atmosphere which cause refraction and scattering of the propagating rays. These effects either limit the frequencies that can be observed to those above ∼1 THz, or they move the optical point outwards beyond the vacuum value of ≥550 au. (Thus for observing frequency of 300 GHz the optical point is moved outwards to ∼ 680 au.) Density fluctuations in the inner solar atmosphere will further cause random pathlength differences for different rays. The corrections for the radiation from the Sun itself will also be a major challenge at any wavelength used, but could be mitigated with coronographic techniques. Given reasonable constraints on the spacecraft (particularly in terms of size and propulsion), source selection as well as severe navigational constraints further add to the difficulties for a potential mission. Nevertheless, unbiased surveys of small-scale structure on the sky at short wavelengths might be the most promising application of such a mission.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

I(L)值完全诱导空间

作者引入 I(L)值完全下半连续映射 ,研究其性质。利用 I(L)值完全下半连续映射定义I(L)值完全诱导空间 ,给出 I(L)值完全诱导空间的拓扑基的表达形式 ,证得两个 I(L)值完全诱导空间的映射是连续映射的充分必要条件 ,并建立了乘积空间的 I(L)值完全诱导空间与 I(L)值完全诱导空间的乘积空间的联系     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。     

广州城市空间形态扩展中土地供应动力机制的作用

近 10年来呈剧烈变动状态的广州城市空间形态 ,刻烙着城市有机体内外部矛盾碰撞摩擦的痕迹 ,其中包含着权力行为力在空间的冲突过程。文中拟就从人文主义方法论的角度 ,以土地供应为中介媒体 ,研究分析它的供应机制对近 10年广州城市空间形态生长的影响 ,映视土地供应背后权力行为力对城市空间形态扩展影响的一般规律 ,以引导城市空间的健康发展     

Religion and technology: refiguring place, space, identity and community

This paper reviews the literature on the religion–technology nexus, drawing up a research agenda and offering preliminary empirical insights. First, I stress the need to explore the new politics of space as a consequence of technological development, emphasizing questions about the role of religion in effecting a form of religious (neo)imperialism, and uneven access to techno-religious spaces. Second, I highlight the need to examine the politics of identity and community, since cyberspace is not an isotropic surface. Third, I underscore the need to engage with questions about the poetics of religious community as social relations become mediated by technology. Finally, I focus on questions about the poetics of place, particularly the technological mediation of rituals.     

现代水文与空间数据采集技术

从基本定义、研究对象、研究领域、研究手段、研究方法、研究目的以及数据采集、服务等多个不同层面，对传统水文(学)和现代水文(学)进行了比较，分析了二者的特征和区别，论述了从传统水文向现代水文转变是现代水利的必然要求，而空间数据采集技术是实现这一转变极其重要的途径和手段。     

从洛杉矶地区地震实验计划说起

简要介绍了美国洛杉矶地震实验计划(LARSE)的研究目的、科学思路以及一些重要的研究成果。受LARSE计划实践的启发，文章对我国即将开展的城市活断层探测研究思路提出了几点科学认识：①进行深浅活动构造相结合的探测，建立直到震源深度的活动断裂立体图像；②实施折射／反射相结合的综合性探测，发展高分辨折射技术，弥补数百米-数千米深度范围成像的不足；③重要的活动断层常常具有一定的规模，在空间上构成复杂的构造格局，因此，活断层探测不能局限在城市，而应在一定的空间范围中进行。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.