Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

Effects of salinity on egg and fecal pellet production,development and survival,adult sex ratio and total life span in the calanoid copepod, <Emphasis Type="Italic">Acartia tonsa</Emphasis>: a laboratory study

The effects of salinity on the copepod, Acartia tonsa in terms of daily egg production rate (EPR), hatching success, fecal pellet production rate (FPR), naupliar development time and survival, sex ratio, and total life span were determined in laboratory conditions through three experiments. In experiment 1, EPR, hatching success, and FPR of individual females were monitored at salinities of 13, 20, 35 and 45 during short-periods (seven consecutive days). Results show EPR was affected by salinity with the highest outputs recorded at 20 and 35, respectively, which were considerably higher than those at 13 and 45. Mean FPR was also higher in 35 and 20. In experiment 2, the same parameters were evaluated over total life span of females (long-term study). The best EPR and FPR were observed in 35, which was statistically higher than at 13 and 20. In experiment 3, survival rates of early nauplii until adult stage were lowest at a salinity of 13. The development time increased with increasing of salinity. Female percentage clearly decreased with increasing salinity. Higher female percentages (56.7% and 52.2%, respectively) were significantly observed at two salinities of 13 and 20 compared to that at 35 (25%). Total longevity of females was not affected by salinity increment. Based on our results, for mass culture we recommend that a salinity of 35 be adopted due to higher reproductive performances, better feeding, and faster development of A. tonsa.     

Reclamation of calcareous saline–sodic soil using different amendments: Time changes of soluble cations in leachate

Soil salinity and sodicity are escalating problems worldwide, especially in arid and semiarid regions. A laboratory experiment was conducted using soil column to investigate leaching of soluble cations during reclamation process of a calcareous saline–sodic soil (CaCO₃?=?20.7%, electrical conductivity (EC)?=?19.8 dS m^?1, sodium absorption ratio (SAR)?=?32.2[meq L^?1]^0.5). The amendments consisted of control, cattle manure (50 g kg^?1), pistachio residue (50 g kg^?1), gypsum (5.2 g kg^?1; equivalent of gypsum requirement), manure + gypsum and pistachio residue + gypsum, in three replicates which were mixed thoroughly with the soil, while sulfuric acid as an amendment was added to irrigation water. To reflect natural conditions, after incubation period, an intermittent irrigation method was employed every 30 days. The results showed that EC, SAR, and soluble cations of leachate for the first irrigation step were significantly higher than those of the subsequent leaching runs. Moreover, the concentration of removed soluble cations was lower for the control and gypsum-treated soils. It was found that among applied amendments, treatments containing cattle manure showed higher concentrations of sodium, calcium, and magnesium in the leachate, while due to pistachio residue application, further amount of potassium was removed out of soil column. The addition of pistachio residue resulted in the highest reduction in soil salinity and sodicity since the final EC and exchangeable sodium percentage dropped to 18.0% and 11.6% of their respective initial values, respectively. In the calcareous soil, solubility of gypsum found to be limited, in contrast, when it was added in conjunction with organic amendments, greater amounts of sodium were leached.     

Relativistic Models for Strange Stars in Massive Brans–Dicke Gravity

Astronomy Reports - In this paper, we examine the salient features of anisotropic quark stellar model in the background of massive Brans–Dicke gravity. We use the MIT bag model along with...     

Denoising and improving the quality of seismic data using combination of DBM filter and FX deconvolution

Seismic data denoising, random noise attenuation (RNA) and spike-like noise suppression, is a main consideration for improving the quality of records. RNA could increase signal to noise ratio (S/N) to avoid misinterpretation of seismic data. In this research, a novel method is created by using the combination of frequency-offset deconvolution (FXD) and decision-based median (DBM) filter for RNA from seismic data. The method is applied in two main phases; FXD is focused to remove the Gaussian noise and DBM filter is focused to attenuate the impulsive noise and spikes. To implement and verify the method, three types of data are used: two synthetic models (a model with linear events and a model with hyperbolic events) and an observed seismic section. The ability of the proposed method (FXD-DBM) in comparison of applying each in seismic RNA application is proven. The noise level is reduced obviously, and hence, the S/N of all examined seismic records is increased considerably after denoising by the combination of FX deconvolution and DBM filter. About the real seismic section, suppressing random noise and spikes show up improving the seismic reflector continuity and hence enhancing the interpretability of data. Moreover, some masked events by random noise are clarified in different parts of data after denoising using the planned method.     

Application of rock mass index (RMi) to the rock mass excavatability assessment in open face excavations

Earthwork and surface excavation activities play an important role in construction projects. Selecting the best technique to loosen the overburden material within the surface excavation in open mining and geotechnical projects is of great importance from economical and technical viewpoints. Surface excavation includes direct digging, ripping and blasting. To select the most effective method and plan for excavation, geotechnical investigation is very important. It is also a big help in avoiding conflict between contractors and clients when they do not reach mutual agreement regarding the price of rock and soil excavation. There are many engineering classification systems used to assess rock masses for excavation purposes. All of these systems consider several geotechnical parameters to assess the earth masses. This study reviews these systems and then offers a new categorization based on the Rock Mass index (RMi) classification system and block volume to assess excavation in rock masses. The original dataset was obtained from the literature review as well as the surface excavation in Upper Gotvand dam and Hydro Power Plant (HPP). The offered system was also validated through the data extracted from the surface excavation in Sardasht dam and HPP in Iran.     

Geochemistry and origin of Dehoo manganese deposit,south Zahedan,southeastern Iran

Dehoo manganese deposit is located 52 km to the south of Zahedan in Sistan and Baluchestan Province, southeastern Iran. This deposit that lies in the central part of the Iranian Flysch Zone is lenticular in shape and lies above the micritic limestone-radiolarite cherts of the upper Cretaceous ophiolite unit. It is hosted within the reddish to brown radiolarite cherts and in places interlinks with them, so that the radiolarite chert packages play a key role for Mn mineralization in the region. Investigated ore-paragenetic successions and the geochemical characteristics of the Dehoo deposit were studied by means of major oxide, trace, and rare earth element (REE) contents that provide information as to the mineral origin. Strong positive correlations were found between major oxides and trace elements (Al₂O₃-TiO₂, r = 0.95; TiO₂-MgO, r = 0.94; Fe₂O₃-Al₂O₃, r = 0.90; MgO-Al₂O₃, r = 0.84; MgO-Fe₂O₃, r = 0.88; Fe₂O₃-TiO₂, r = 0.91; Fe₂O₃-K₂O, r = 0.74; Al₂O₃-K₂O, r = 0.69; Al₂O₃-V, r = 0.72; TiO₂-V, r = 0.73, and MgO-V, r = 0.69) that testify to the contribution of mafic terrigenous detrital material to the deposit. Chondrite-normalized REE patterns of all ore samples are characterized by negative Ce (0.06–0.15, average 0.10) and slightly positive Eu (0.29–0.45, average 0.36) anomalies. Based on ratios of Mn/Fe (average 56.23), Co/Ni (average 0.33), Co/Zn (average 0.38), U/Th (average 3.40), La/Ce (average 1.45), La_n/Nd_n (average 2.16), Dy_n/Yb_n (average 0.33), and light REE/heavy REE (average 8.40; LREE > HREE), as well as Ba (average 920 ppm) and total REE contents (average 6.96 ppm) negative Ce and positive Eu anomalies, Dehoo could be considered a predominantly submarine hydrothermal Mn deposit complemented by terrigenous detrital mafic material.     

Application of the Ordered Weighted Averaging (OWA) method to the Caspian Sea conflict

This study proposes a promising allocation mechanism of the Caspian Sea natural resources, which are presently shared among five countries. To date, these nations have been unable to reach an allocation agreement. We apply a methodology to propose the most appropriate solution under different risk attitudes of the states. This research is different from other studies regarding the Caspian Sea negotiations in that it employs risk-based fuzzy multi attribute decision making methods for simulating the risk attitudes or optimism/pessimism degrees of the decision makers. The ordered weighted averaging (OWA) approach, which considers the optimism/pessimism degree quantitatively, is used to take into account the effects of different risk attitudes of the negotiators on the final outcome. We demonstrate how one could obtain a range of alternatives under different multi attribute and risk attitudes. The induced OWA (IOWA) method is also used to determine the relative power of these states bordering the Caspian Sea by considering several attributes, including different risk attitudes of agents. Results indicate that taking into account the risk attitude (prone, neutral, averse) of the states can affect the overall ranking of the proposed solutions. The findings from this study may facilitate negotiation regarding the most preferred allocation mechanism for the Caspian Sea.