Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Gravitational collapse and equilibrium conditions of a toroidal vortex with thermal pressure

We found the equilibrium conditions for a self-gravitating toroidal vortex by taking thermal pressure into account. These conditions are shown to significantly differ from those for a disk or a sphere. The evolution of a thin vortex turns it into a compact vortex that loses mechanical stability for low masses at a polytropic index γ<4/3 but retains stability for sufficiently high masses and densities determined by the velocity circulation in the vortex.     

A geological and geotechnical investigation of the settlement area of Zümrüt Building (Konya, Turkey) which caused 92 fatalities due to its collapse

This study examines the local geological conditions and soil structure as possible causes of the collapse of the Zümrüt Building 2 February 2004. This catastrophe resulted in 92 fatalities and 35 injuries. This study also examines other views which claim weak soil structure, elastic and consolidation settlement of soil and excessive groundwater extraction as well as subsidence resulting from the underground silt erosion as possible factors. Zümrüt Building was constructed on normally consolidated, low plasticity clay. The underground water table was 30 m in depth. The internal friction angle of soil was 8°–30°, its cohesion was between 34 and 127 kN/m² and standard penetration test numbers varied between 11 and 50. The underground water level beneath Zümrüt Building had risen 4.5 m since its construction. Therefore the claim that subsidence resulting from the decrease of underground water level contributed to the collapse is incorrect. Secondly the settlement, resulting from the filling up of the pores created by the silt receding with the underground water, was 4.4 mm in total, and attributing this as the primary cause of the collapse is also incorrect. Soil properties, in situ and laboratory test results showed that the existing and/or expected settlement and the differential ground settlement in the Zümrüt building vicinity had the potential to cause structural damage. The tensile stresses caused by differential settlements recorded here are thought to be an indicator, but not the main cause contributing to the collapse of the building. The Zümrüt Building collapse was due to several compounding mistakes during the construction phase. These were geotechnical and other project faults and the use of low quality construction materials. The resulting catastrophe caused 92 fatalities, 35 injuries and a material loss of approximately US$7 million.     

Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.     

Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.     

广东省五华县地质灾害形成特征及防治对策

五华县主要地质灾害类型有滑坡、崩塌、地面塌陷、水土流失等。其中以滑坡、崩塌为主,多分布在东南、南部花岗岩区、北部花岗岩风化土区等广大中低山及丘陵区,具有点多面广,灾害点个体规模小,稳定性差,活动频繁,地质灾害发育呈明显的地域性与季节性分布等特点。五华县地质灾害的形成与发生是多种致灾因素相互作用的结果。地层岩性是其形成的内在要素,它在一定程度上决定着地质灾害的发育程度与类型;地形地貌与植被是地质灾害形成的外在条件,它制约着崩、滑、塌等致灾地质作用的形成;大气降雨是地质灾害形成与发生的激发因素,决定着地质灾害发生的速度和时间;人类工程活动是影响地质灾害形成与发生的最主要、最直接的因素。对地质灾害的防治应采用避让、预防、监测及治理措施,做到避让与治理结合,以群测群防为基本手段,点状灾害以工程治理与生物防治为主;面状灾害以生物防治为主;采用点、面结合综合治理的方法。     

隧道围岩强度不均地段塌方成因及其处理方法

由于地质构造作用以及风化作用,工程场地岩体中多存在围岩强度不均地段.在隧道施工过程中就经常遇到软硬岩石交汇而形成的地质条件复杂地段;给隧道的施工带来了很多不利情况,并且也是导致隧道塌方的原因之一.2006年1月,承德韩郭线二级公路工程,喇嘛梁隧道软硬岩石交汇地段由于地下水作用导致围岩风化程度不均,产生软弱结构面并造成了大面积塌方.基于现场的追踪调查与考察,本文详细描述了利用拱顶架设工字钢梁并配合超前注浆小导管的支护方法来处理这类围岩.     

地下矿产开采对天然气管道工程的安全影响评价

西气东输天然气管道工程途经兖州市,穿越杨庄、杨村、兴隆庄等煤矿矿区,压覆煤层埋深变化较大。该文采用预测法对各煤矿在不同开采条件下分煤层对管道运营安全的危害程度进行了评价分析。通过计算表明,煤矿开采埋深越浅,煤层越厚,对管道危害越严重。兴隆庄煤矿3煤层、杨村煤矿煤16t、煤17开采对管道影响强烈,杨庄煤矿煤16t、煤17开采对管道影响中等,兴隆庄煤矿煤16t、煤17开采对管道运营影响小。     

Sector collapse,sedimentation and clast population evolution at an active island-arc volcano: Stromboli,Italy

Sciara del Fuoco is the subaerial part of a partially filled sector-collapse scar that extends to 700 m below sea level on Stromboli volcano. The collapse occurred <5000 years ago, involved 1.81 km³ of rock and is the latest of a series of major collapses on the north-west flank of Stromboli. A north-east trending arc-axial fault system channels magmas into the volcano and has caused tilting and/or downthrow to the north-west. The slope of the partial cone constructed between the lateral walls of the collapse scar acts as a channelway to the sea for most eruptive products. From 700 m below sea level and extending to >2200 m and >10 km from the shore to the NNW, a fan-shaped mounded feature comprises debris avalanche deposits (>4 km³) from two or more sector collapses. Volcaniclastic density currents originating from Sciara del Fuoco follow the topographic margin of the debris avalanche deposits, although overbank currents and other unconfined currents widely cover the mounded feature with turbidites. Historical (recorded) eruptive activity in Sciara del Fuoco is considerably less than that which occurred earlier, and much of the partial fill may have formed from eruptions soon after the sector collapse. It is possible that a mass of eruptive products similar to that in the collapse scar is dispersed as volcanogenic sediment in deep water of the Tyrhennian basin. Evidence that the early post-collapse eruptive discharge was greater than the apparent recent flux (2kg/s) counters suggestions that a substantial part of Stromboli's growth has been endogenous. The partial fill of Sciaria del Fuoco is dominated by lava and spatter layers, rather than by the scoria and ash layers classically regarded as main constituents of Strombolian (cinder) cones. Much of the volcanic slope beneath the vents is steeper than the angle of repose of loose tephra, which is therefore rapidly transported to the sea. Delicate pyroclasts that record the magmatic explosivity are selectively destroyed and diluted during sedimentary transport, mainly in avalanches and by shoreline wave reworking, and thus the submarine deposits do not record well the extent and diversity of explosive activity and associated clast-forming processes. Considerable amounts of dense (non-vesicular) fine sand and silt grains are produced by breakage and rounding of fragments of lava and agglutinate. The submarine extension of the collapse scar, and the continuing topographic depression to >2200 m below sea level, are zones of considerable by-passing of fine sand and silt, which are transported in turbidity currents. Evidently, volcanogenic sediments dispersed around island volcanoes by density currents are unlikely to record well the true spectrum and relative importance of clast-forming processes that occurred during an eruption. Marine sedimentary evidence of magmatic explosivity is particularly susceptible to partial or complete obliteration, unless there is a high rate of discharge of pyroclastic material into the sea.     

Strain softening of K0-consolidated Changi sand under plane-strain conditions

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).