鄂尔多斯盆地中生代晚期以来大地热流的变化及其对生态环境格局和演变的影响

鄂尔多斯盆地的西北部、东北部和南部三个区域现今大地热流平均值分别为56．3、67．3和65．3mW／m^2，对应的生态环境格局也有明显的差异。研究表明，大地热流每增加4～5mW／m^2可使年均地表温度升高约l℃，使最低月均地表温度升高2。C以上。鄂尔多斯盆地东北部的平均大地热流比西北部高出11mW／m^2，东北部年均地表温度可能比西北部高出2～3℃，其最低月均地表温度可能比西北部高出4～6℃。西北部的大地热流平均值已经低于维持地表生态系统延续所需大地热流的临界值(57mW／m^2)，其自然生态系统整体上已经处于脆弱境地；东北部和南部的大地热流均大于57mW／m^2，自然生态系统均尚较稳健。东北部的沙漠化可能是风沙侵入的结果，其生态应该是可以恢复的。整个西北部作为一个整体看，72万年以前大地热流就已衰减到临界值以下，区域生态系统渐趋脆弱，开始整体上向荒漠化演变。     

含煤盆地煤储层后期改造形式及对煤层气选区影响--以华北克拉通选区为例

阐述了改造型含煤盆地煤储层被改造的两种形式；煤体结构的改造及构造煤的形成原因；后生充填物对煤层孔隙的改造及形成原因。提出了以构造煤发育程度作为改造型含煤盆地改造强度的一个指标。概述了华北克拉通盆地由中生代剪压应力转化为新生代剪张应力和拉张应力，而在盆地内形成以挤压构造为主到伸展构造为主的演化历程，及不同构造类型的区域分布，指出这种演化极易形成构造煤和后生充填物。提出将华北克拉通含煤盆地分为3种改造类型及其分布区域，分析了各自区域的煤储层物性及对煤层气开发选区的影响。提出应重视鄂尔多斯盆地侏罗纪煤层的煤层气．研究与开发．     

磷对金刚石增强型硬质合金复合齿性能的影响

在金刚石增强型硬质合金复合齿基体中添加不同量红磷，可降低复合齿烧结温度，实现低温活化烧结。研究表明：添加0．3％(ωB)P的复合齿基体性能最好，采用化学镀Ni-P合金添加P和球磨添加0．1％P的方式，复合齿超硬部分的磨耗比和复合齿的抗冲击功优于单纯通过球磨添加0．3％P的超硬复合齿。为了实现金刚石增强型硬质合金复合齿的低温活化烧结，磷元素最优的添加方式是化学镀结合球磨的添加方式。     

高坪-吉心段公路喀斯特工程地质综合勘察

以沪蓉国道主干线湖北省高坪-吉心段的喀斯特地质勘察工作为例，探讨喀斯特地区公路工程地质综合勘察的基本方法。在喀斯特地区运用遥感和地理信息技术技术、地质测绘、综合物探以及地质钻探等勘察手段，通过综合分析各种勘探成果，能够较准确地查明可溶岩的分布、喀斯特形态类型、分布规律、控制因素以及喀斯特水的赋存、分布和运移规律等，并根据不同的喀斯特地貌提出了有针对性的处理对策。通过不断的实践和经验总结。针对喀斯特工程地质问题合理运用综合工程勘察方法，能做出科学的分析评价，可以适应喀斯特区公路建设的需要，并且供今后在喀斯特地区修建公路时参考和借鉴。     

乌拉苔草光合速率日变化及日同化量

乌拉苔草沼泽是长白山沟谷湿地的重要类型 ,对其光合速率研究的结果表明 ,乌拉苔草光合速率日变化呈单峰曲线 ,最高峰出现在 1 0时 ,最大值是 1 8.0 7μmol(CO2 ) / (m2 ·s) ;与其该群落伴生的修氏苔草光合速率日变化出现“午休”现象。影响光合速率最大的环境因素是光量子通量密度和叶温 ,呈极显著的正相关 ,其他因素亦多呈正相关 ,环境因子综合影响了乌拉苔草的光合日进程。乌拉苔草光合作用的日总同化量为 1 896 0 1 .2 μmol(CO2 ) /m2 ,是光合能力较强的一种沼泽植物     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

Correcting method of eddy covariance fluxes over non-flat surfaces and its application in ChinaFLUX

Although Eddy Covariance (EC) technique is one of the best methods for estimating the energy and mass exchanges between underlying surface and atmosphere in micrometeorology, errors and uncertainties still exist without necessary corrections. In this paper, we will focus on the effect of coordinate system on the eddy fluxes. Based on the data observed over four sites (one farmland site, one grassland site and two forest sites), the effects of three coordinate system transforming methods (Double Rotation-DR, Triple Rotation-TR and Planar Fit-PF)on the turbulent fluxes are analyzed. It shows that (i) the corrected fluxes are more or less than the uncorrected fluxes, which is related mainly to the sloping degree of surface, wind speed and wind direction; and (ii) pitch angle has a sinusoidal dependence on wind direction, especially in the regular sloping terrain; and (iii) PF method is something like the simplification of TR or DR,and there are not obvious distinctions in correction in sloping grassland and flat farmland, but PF method is not suitable for uneven and irregular forest sites.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

Study of statistically correcting model CMAQ-MOS for forecasting regional air quality

Based on analysis of the air pollution observational data at 8 observation sites in Beijing including outer suburbs during the period from September 2004 to March 2005, this paper reveals synchronal and in-phase characteristics in the spatial and temporal variation of air pollutants on a city-proper scale at deferent sites; describes seasonal differences of the pollutant emission influence between the heating and non-heating periods, also significantly local differences of the pollutant emission influence between the urban district and outer suburbs, i.e. the spatial and temporal distribution of air pollutant is closely related with that of the pollutant emission intensity. This study shows that due to complexity of the spatial and temporal distribution of pollution emission sources, the new generation Community Multi-scale Air Quality (CMAQ) model developed by the EPA of USA produced forecasts, as other models did, with a systematic error of significantly lower than observations, albeit the model has better capability than previous models had in predicting the spatial distribution and variation tendency of multi-sort pollutants. The reason might be that the CMAQ adopts average amount of pollutant emission inventory, so that the model is difficult to objectively and finely describe the distribution and variation of pollution emission sources intensity on different spatial and temporal scales in the areas, in which the pollution is to be forecast. In order to correct the systematic prediction error resulting from the average pollutant emission inventory in CMAQ, this study proposes a new way of combining dynamics and statistics and establishes a statistically correcting model CMAQ-MOS for forecasts of regional air quality by utilizing the relationship of CMAQ outputs with corresponding observations, and tests the forecast capability. The investigation of experiments presents that CMAQ-MOS reduces the systematic errors of CMAQ because of the uncertainty of pollution emission inventory and improves the forecast level of air quality. Also this work employed a way of combining point and area forecasting, i.e. taking the products of CMAQ for a center site to forecast air pollution for other sites in vicinity with the scheme of model products "reanalysis" and average over the "area".     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.