Effect of Inter-Column Spacing on Soil Stresses due to Vibro-Installed Stone Columns: Interesting Findings

This paper reveals the interesting relation between the inter-column spacing and the corresponding alteration of soil state of stresses due to the vibro-installation technique. This relation is inferred from analyses for load settlement records of various field load tests, performed for stone columns arrangements with different inter-column spacing values. In order to have adequate confidence in the findings, a well-documented case history, involving three columns patterns along with their relevant field and laboratory test results, is utilized for this study. Moreover, a well-tested finite element model, capable of simulating both elasto-plastic and time dependent soil deformations as well as pore water pressure building and dissipation, is employed in the analysis. Instead of determining the soil response to the test load, based on known initial soil stresses and material properties, the analysis is inversely posed to determine the soil initial stresses, based on the recorded settlements and the post-installation material properties. The alteration in the soil state of stress is represented by the increase in the post-installation horizontal to vertical stress ratio, K*, as a function of the inter-column spacing. It is found that this alteration experiences a systematic decrease in its magnitude as the inter-column spacing increases.     

异型柱框架结构抗震设计研究

本文在充分考虑钢筋混凝土异型柱框架结构受力特点的基础上，从结构布置、内力组合与调整、轴压比限值和其他构造措施等方面，针对抗震计算和概念设计进行了分析与讨论，得出注重抗震计算分析、加强抗震概念设计等结论，分析过程和有关结论可供工程设计人员参考。     

Seismic response analysis of multidrum classical columns

This paper presents a numerical investigation on the seismic response of multidrum classical columns. The motivation for this study originates from the need to understand: (a) the level of ground shaking that classical multidrum columns can survive, and (b) the possible advantages or disadvantages of retrofitting multidrum columns with metallic shear links that replace the wooden poles that were installed in ancient times. The numerical study presented in this paper is conducted with the commercially available software Working Model 2D?, which can capture with fidelity the sliding, rocking, and slide‐rocking response of rigid‐body assemblies. This paper validates the software Working Model by comparing selected computed responses with scarce analytical solutions and the results from in‐house numerical codes initially developed at the University of California, Berkeley, to study the seismic response of electrical transformers and heavy laboratory equipment. The study reveals that relative sliding between drums happens even when the g‐value of the ground acceleration is less than the coefficient of friction, µ, of the sliding interfaces and concludes that: (a) typical multidrum classical columns can survive the ground shaking from strong ground motions recorded near the causative faults of earthquakes with magnitudes M_w=6.0–7.4; (b) in most cases multidrum classical columns free to dislocate at the drum interfaces exhibit more controlled seismic response than the monolithic columns with same size and slenderness; (c) the shear strength of the wooden poles has a marginal effect on the sliding response of the drums; and (d) stiff metallic shear links in‐between column drums may have an undesirable role on the seismic stability of classical columns and should be avoided. Copyright © 2005 John Wiley & Sons, Ltd.     

Analytical investigations of seismic responses for reinforced concrete bridge columns subjected to strong near-fault ground motion

Strong near-fault ground motion, usually caused by the fault-rupture and characterized by a pulse-like velocity- wave form, often causes dramatic instantaneous seismic energy (Jadhav and Jangid 2006). Some reinforced concrete (RC) bridge columns, even those built according to ductile design principles, were damaged in the 1999 Chi-Chi earthquake. Thus, it is very important to evaluate the seismic response of a RC bridge column to improve its seismic design and prevent future damage. Nonlinear time history analysis using step-by-step integration is capable of tracing the dynamic response of a structure during the entire vibration period and is able to accommodate the pulsing wave form. However, the accuracy of the numerical results is very sensitive to the modeling of the nonlinear load-deformation relationship of the structural member. FEMA 273 and ATC-40 provide the modeling parameters for structural nonlinear analyses of RC beams and RC columns. They use three parameters to define the plastic rotation angles and a residual strength ratio to describe the nonlinear load- deformation relationship of an RC member. Structural nonlinear analyses are performed based on these parameters. This method provides a convenient way to obtain the nonlinear seismic responses of RC structures. However, the accuracy of the numerical solutions might be further improved. For this purpose, results from a previous study on modeling of the static pushover analyses for RC bridge columns (Sung et al. 2005) is adopted for the nonlinear time history analysis presented herein to evaluate the structural responses excited by a near-fault ground motion. To ensure the reliability of this approach, the numerical results were compared to experimental results. The results confirm that the proposed approach is valid.     

异形柱抗震性能分析

异形柱框架结构是1种新型节能住宅结构,本文利用有限元软件,采用反应谱方法,从异形柱与矩形柱框架结构在地震作用下的变形特性和位移着手,研究2种结构的抗震性能,得出了异形柱的抗震性能好的结论。     

钢-混凝土组合剪力墙抗震性能研究简述

钢-混凝土组合剪力墙可以充分发挥钢和混凝土2种材料的优势,改善传统钢筋混凝土剪力墙延性和耗能能力较差的缺点,在钢-混凝土混合结构中具有应用优势。本文简要介绍了国内外一些新型的钢-混凝土组合剪力墙,并简述了其抗震性能的研究现状,最后对一些关键问题进行了初步探讨。     

超高强混凝土短柱抗震性能的试验研究

通过对12根剪跨比λ=2．0的超高强混凝土短柱在低周反复荷载下抗震性能的试验研究，分析了其破坏形态，并研究了轴压比和配箍率对试件滞回特性和抗震延性的影响，提出了满足一定延性要求（μ△≥3．0）超高强混凝土短柱的轴压比限值和箍筋加密区的最小配箍特征值的建议值。该值可为现行规范的修订提供参考。     

型钢高强混凝土柱轴压比限值的试验研究

通过20个型钢高强混凝土柱的低周反复加载试验对其受力性能进行了研究，分析了剪跨比、轴压比、配箍率以及混凝土强度对型钢高强混凝土柱延性的影响，提出了不同剪跨比、不同配箍率的型钢高强混凝土柱的轴压比限值。其中，剪跨比大于2．0的型钢高强混凝土柱的轴压比限值由大、小偏心界限破坏时力的平衡条件并结合试验结果确定，而剪跨比小于2．0的型钢高强混凝土柱的轴压比限值则通过与剪跨比大于2．0的型钢高强混凝土柱的延性对比加以确定。     

Inference of surface concentrations of nitrogen dioxide (NO2) in Colombia from tropospheric columns of the ozone measurement instrument (OMI)

For the first time, maps of surface concentration of nitrogen dioxide (NO₂) are presented for the Colombian territory. NO₂ surface concentrations for the year 2007 are inferred based on two sources of tropospheric NO₂ column data: (1) a simulation using a three-dimensional global model (GEOS-Chem) and (2) measurements made by the ozone monitoring instrument (OMI) onboard the NASA Aura satellite. Results show monthly averages between 0.1 and 6 ppbv. We compare these inferred values to corrected ground measurements of NO₂. We find correlation coefficients of up to 0.91 between the inferred data and the corrected observational data. A significant source of NO₂ is biomass burning, which can be diagnosed by data of fire radiative power (FRP) from the Monitoring of Atmospheric Composition and Climate (MACC) reanalysis. We find a close relationship between high values of inferred NO₂ surface concentrations and biomass burning for a large area which encompasses the departments of Caquetá, Meta, Guaviare, Vichada, and Putumayo.     

海洋浮游藻色素分析和化学分类研究进展

综述了海洋浮游藻色素分析和化学分类研究的最新进展。指出目前以色谱柱串联技术为基础的高分辨高效液相色谱质谱联用已经成为色素分析方法的主要发展趋势。利用此方法对藻类特征色素进行再分析有助于获得对藻类色素分布的新认识。CHEMTAX是在宏观上对浮游藻进行化学分类的良好工具,采用多次运算的方式可以减少其对初始色素比值的依赖,使结果向"真实值"收敛,提高结果的准确性。指出研究以特征色素比值组合为基础的浮游藻精细化学分类方法,以及将以色素分析为基础的浮游藻化学分类应用于了解浮游藻功能类群在生源要素和生物矿物质等的生物地球化学循环过程中的作用是未来的发展趋势。