Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

The Flared Disc Project: RXTE and ASCA observations of X 1822−371

We present archival Rossi X-ray Timing Explorer ( RXTE ) and simultaneous Advanced Satellite for Cosmology and Astrophysics ( ASCA ) data of the eclipsing low mass X-ray binary (LMXB) X 1822−371. Our spectral analysis shows that a variety of simple models can fit the spectra relatively well. Of these models, we explore two in detail through phase-resolved fits. These two models represent the case of a very optically thick and a very optically thin corona. While systematic residuals remain at high energies, the overall spectral shape is well approximated. The same two basic models are fitted to the X-ray light curve, which shows sinusoidal modulations interpreted as absorption by an opaque disc rim of varying height. The geometry we infer from these fits is consistent with previous studies: the disc rim reaches out to the tidal truncation radius, while the radius of the corona (approximated as spherical) is very close to the circularization radius. Timing analysis of the RXTE data shows a time-lag from hard to soft consistent with the coronal size inferred from the fits. Neither the spectra nor the light curve fits allow us to rule out either model, leaving a key ingredient of the X 1822−371 puzzle unsolved. Furthermore, while previous studies were consistent with the central object being a 1.4 M_⊙ neutron star, which has been adopted as the best guess scenario for this system, our light curve fits show that a white dwarf or black hole primary can work just as well. Based on previously published estimates of the orbital evolution of X 1822−371, however, we suggest that this system contains either a neutron star or a low mass (≲2.5 M_⊙) black hole and is in a transitional state of duration shortward of 10⁷ yr.     

CygX—1硬态高能光子的时延

硬X射线和软射线光子的时延时研究主能辐射的一个重要方面，傅里叶交叉谱常常被用于教育处硬软光子之间的时延，但是交叉说示能在高于30Hz的傅里叶频率上从CygX-1测量到有统计意义的快速光变，由李惕培在时域上发展的交叉相关函方法能有效测量不同时间尺度上的时延，利用此交叉相关分析方法，讨论了不同观测时期CygX-1硬态高能光子时延 的性质，分析结果表明，CygX-1硬态在短的尺度（＜0．1秒）上存存在有意义的时间延迟，并将短时间尺度上的观测结果和各种CygX-1硬态模型进行了比较讨论。     

X射线衍射数据分析系统评价

以贵州省高灰、高污染组分煤中矿物质的分析为例,应用Bruker AXS D8 Advance衍射仪测得煤中矿物相的X射线衍射图谱,分别应用数据分析系统EVA 12.0、X’Pert HighScore 2.0和MDI Jade 5.0对矿物物相组成的原始测试数据进行定性分析,通过对比分析过程和结果的差异比较了三款软件系统之间的异同和优劣。     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。     

X射线衍射峰五基本要素的物理学意义与应用

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。     

不同浓度Li2SO4水溶液结构的X射线衍射研究

用θ～ 2θ型粉末衍射仪反射法精确测量了不同浓度的Li2 SO4水溶液的衍射数据 ,通过数据处理给出了溶液的结构函数和径向分布函数 ,由几何结构模型的最小二乘法精修 ,得到了溶液中阳离子和阴离子第一、二水合层的结构参数。     

利用高铁钾长石粉合成13X沸石分子筛的实验研究

对江苏丰县的富钾页岩进行预处理，得到钾长石含量达76．4％的钾长石粉，其Fe2O3含量高达7．52％。以此钾长石粉为原料经过焙烧处理、水热合成实验，在铁含量较高情况下成功合成了13X沸石分子筛，并采用正交实验法确定了优化工艺参数。对实验产物的主要性能测试表明，合成的富铁沸石产品与13X沸石分子筛工业产品相似，吸附量达到国家化学工业产品标准，可用于对含重金属离子废水的吸附处理。     

湖南黄金洞金矿毒砂中Au赋存状态的电子探针研究

本文利用ＪＸＡ－８８００Ｍ超大型电子探针，以湖南黄金洞金矿含金毒砂为研究对象。利用金特征Ｘ－射线扫描方法和微区含金含量，对不可见金赋存状态的研究方法和温试条件进行了探索，先观察背散射电子图像，排除金在含金矿物毒砂中呈显显微颗粒存在的可能性，继而用ＬｉＦ晶体测定金Ｌ＝８８．７６Ｌａｌ峰位，然后逐渐放大倍数（ｘ３００，ｘ１０００，ｘ５０００，ｘ３００００，ｘ２０００００）进行金特征，Ｘ－射线连续测量，，结果发现金元素总 是均匀分布在重砂中，从而证实了金呈品格金形式存在的推测。     

X2检验假设分布有效性的岩体工程应用

在工程地质问题中许多现象是不确定、且具有随机分布的特性，而这种随机分布特性往往可以采用某种形式的密度函数来描述。采用Ｘ２检验假设分布有效性是一个重要的方法，采用该法可以获得观测数据最佳拟合的概率模型，通过自编程序可以同时检验多种概率密度函数并选取最佳模型。本文将介绍这一方法，并通过一个实例加以说明。