沉积钙质白云石带状面缺陷的择优取向

作者用透射电子显微镜研究了沉积钙质白云石中的带状面缺陷。在衍衬象中面缺陷呈现出特有的条纹衬度,并具有一定的择优取向,它们沿着｛018｝面排列。面缺陷也可分叉,分枝部分平等于｛2－／10｝面。根据白云石面缺陷的取向,本文提出了鞍状白云石宏观弯曲面和微观面缺陷的取向关系。     

超高压变质岩矿物中的显微构造缺陷:来自TEM和FTIR研究的证据

超高压变质矿物的某些显微构造缺陷可能指示了岩石短暂和快速抬升过程。文中报道了中国大别山双河地区超高压硬玉石英岩矿物显微构造缺陷的透射电镜(TEM)和Fourier变换红外光谱(FTIR)的研究结果。用TEM研究方法,在硬玉石英岩中硬玉包裹体内发现了亚微米级天然蒙钠长石(MA,C2/m)、高钠长石(HA,C)和低钠长石(LA,C)三种多形变体。表明岩石在折返过程经历过高温变质作用(>930℃),以及退变质过程的快速冷却;在石英包裹体内发现了纳米级柯石英和石盐子矿物,提供了柯石英转变为石英以及峰期变质条件下高盐流体存在的证据。"名义上无水矿物"(NAMs)的结构水(OH/H2O)是以缺陷形式赋存于矿物结构中。FTIR分析结果显示硬玉、石榴石、金红石和石英中结构水的平均含量分别为1000×10-6、(900~1600)×10-6、>2000×10-6和<4×10-6,硬玉石英岩全岩含水量为(490~600)×10-6,表明在高压-超高压变质作用过程中,地壳或原岩中的水可以通过这些NAMs携带到地球深部。该类显微构造缺陷可能是大陆碰撞造山带在高应变速率下的局部弱化和深部断层作用的结果。     

钻孔灌注桩缺陷桩处理实践

在颍河特大桥桩基施工中灌注35号墩-1桩基时，混凝土输送泵出现故障造成浇注中断，桩基检测时发现缺陷，采用旋喷压浆技术进行处理，经检测合格。对采用旋喷压浆处理桩基缺陷的全过程进行了介绍，并对施工中出现的技术问题进行分析。     

现阶段地表油气化探技术难题与发展对策

虽然地表油气化探方法技术已取得显著的应用效果, 但是由于成功率计算标准不同及方法技术本身的缺陷, 导致人们对方法的认同度较低。当前, 地表油气化探技术的发展, 一方面要以可靠的实验依据、严谨的数理推导及理论模型应对来自方法技术本身的挑战, 另一方面也要利用其快速、廉价和直接的优势, 加强与地质、遥感、非震物探等方法综合应用。     

高速公路桥头跳车病害的分析与治理方法探讨

根据高速公路桥头跳车病害探地雷达检测结果,结合路基实际工程地质资料及沉降观测值,分析出造成此病害的原因是桥与路之间沉降差异所致,故搭板与垫层和垫层与路基之间产生了脱空,造成桥搭板、垫层碎裂而出现了桥头跳车病害.针对病害根源,采用了压密注浆进行搭板加固及重新摊铺沥青混合料进行调坡处理的治理方法.     

水晶包裹体的类型及成因综述

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。     

运用X射线衍射和多重峰分离程序解析高岭石的结构缺陷

本文尝试运用Ｘ射线衍射与多重峰分离方法研究高岭石的结构缺陷，重新评价了Ｈｉｎｃｋｌｅｙ（１９６３）结晶指数（ＨＩ），运用０２，１１区域对（１１１）和（１１１）峰的分峰结果，定义了新的结晶度指数：ＣＩ＝（Ｉ１１１＋Ｉ１１１）／Ｉ１１０，它完全以衍射峰的强度进行计算，较灵敏地反映出高岭石真实的结构信息，探讨了高岭石结晶度与高峰石对称性，有序度以及与高岭石Ｐｂ／３滑移缺陷的关系，结果证明高岭石结晶度越高     

The use of microstructures for discriminating turbiditic and hemipelagic muds and mudstones

The microstructures of turbiditic and hemipelagic muds and mudstones were investigated using a scanning electron microscope to determine whether there are microstructural features that can differentiate turbiditic from hemipelagic sedimentary processes. Both types of muddy deposits are, in general, characterized by randomly‐oriented clay particles. However, turbiditic muds and mudstones also characteristically contain aggregates of ‘edge‐to‐face’ contacts between clay particles with long‐axis lengths of up to 30 μm. Based on observations of the clay fabric of the experimentally‐formed muds settled from previously agitated muddy fluids, these types of aggregates, hereafter referred to as ‘aggregates of clay particles’, are interpreted as having been formed by the collision of component flocs in turbulent fluids. Furthermore, some aggregates of clay particles have ‘face‐to‐face’ contacts between clay particles; this is similar to face‐to‐face aggregates characteristically developed in fluid‐mud deposits that are commonly recognized only in turbiditic mudstones, indicating the possibility of a final stage of deposition under highly‐dense conditions, such as temporary fluid muds. In conjunction with earlier proposed lithofacies‐based and ichnofacies‐based criteria, aggregates of clay particles should be useful for the differentiation of turbiditic and hemipelagic muddy deposits, particularly with limited volumes of non‐oriented samples from deep‐water successions.