江郎山风景区旅游形象策划和区域协作

“旅游地形象策划”（TDI）是当今旅游学和旅游业界关心的一个现实课题，文章对浙江省江郎山这样一处地处偏僻但景观壮美的风景区实例，设计其旅游形象总体构思，行为准则和视觉形象，并对“浙中丹霞走廊”旅游区域协作提出见解。     

新疆天山地区地貌分形与多重分形特征研究

利用投影覆盖法和投影覆盖概率对新疆天山地区不同构造地貌类型进行了分形与多重分形特征的研究。结果表明：在所研究的标度范围内，不同地貌区均表现出明显的多度域分形，分维值总体上呈现出高山区＞中低山区＞盆地区特点，多重分形谱Dq的形态和值域范围也表现出不同特征。研究认为，地貌表面的分维值与地貌形成的内外力地质作用方式和强度密切相关，并提出5-6km的尺度可作为地貌学研究中宏观与微观作用的分界点。     

From water to tillage erosion dominated landform evolution

While water and wind erosion are still considered to be the dominant soil erosion processes on agricultural land, there is growing recognition that tillage erosion plays an important role in the redistribution of soil on agricultural land. In this study, we examined soil redistribution rates and patterns for an agricultural field in the Belgian loess belt. ¹³⁷Cs derived soil erosion rates have been confronted with historical patterns of soil erosion based on soil profile truncation. This allowed an assessment of historical and contemporary landform evolution on agricultural land and its interpretation in relation to the dominant geomorphic process. The results clearly show that an important shift in the relative contribution of tillage and water erosion to total soil redistribution on agricultural land has occurred during recent decades. Historical soil redistribution is dominated by high losses on steep midslope positions and concavities as a result of water erosion, leading to landscape incision and steepening of the topography. In contrast, contemporary soil redistribution is dominated by high losses on convex upperslopes and infilling of slope and valley concavities as a result of tillage, resulting in topographic flattening. This shift must be attributed to the increased mechanization of agriculture during recent decades. This study shows that the typical topographical dependency of soil redistribution processes and their spatial interactions must be accounted for when assessing landform and soil profile evolution.     

江西象山地质公园丹霞地貌成景地层沉积环境分析

随着旅游地学的兴起和地学科普的需求,红层与丹霞地貌正在吸引着越来越多的关注。赣东北贵溪市象山地质公园发育以赤壁丹崖为特色的丹霞地貌景观,成景地层为上白垩统圭峰群河口组以砾岩为主的红色碎屑岩,冲刷侵蚀界面、粒序层理和交错层理等沉积构造发育,这为沉积环境分析提供了良好的判断标志。对该套成景地层进行厘米级实测,另外选择2处砾岩露头进行砾石统计以获取碎屑颗粒粒径、岩性、磨圆度和风化程度等信息。在实测厚度为40余米的地层柱状图上,识别出7种岩相类型,即正粒序砾岩、逆粒序砾岩、无沉积构造砾岩、平行层理砾岩、交错层理砾岩、聚集状砾岩、砂岩。砾石以中砾(2~5 cm)为主,磨圆度低,风化程度中等,成分以凝灰岩为主(58%~665%),其次为石英、花岗岩、砂岩。砾石成分和砾向分析结果说明,盆地南部早白垩世凝灰岩提供了主要的碎屑物质。根据野外实测红层剖面和砾石统计分析,认为成景地层为冲积扇沉积体系的产物。河口组红层沉积时期,盆地边缘断层活跃,间歇性强降雨事件导致冲积扇朵叶上洪泛河流搬运的沉积物供应充足,最终在剖面上形成砾岩和砂岩频繁互层及其厚度横向不稳定的现象。在中国东南地区晚白垩世总体干燥的古气候背景下,河口组中河流作用主导的冲积扇沉积体系可能指示了古气候向湿润转变,降水增加,相对丰富的水系将粗碎屑搬运到盆地区发生沉积。     

丹霞山世界地质公园蜂窝状洞穴特征及成因分析

蜂窝状洞穴以其精致的形貌和众说纷纭的成因吸引着科研人员和普通大众的兴趣。丹霞山世界地质公园蜂窝状洞穴主要产于晚白垩世丹霞组二段(锦石岩段)风成砂岩的崖壁上。本文以园区长老峰锦石岩寺和睡美人禄意堂两处蜂窝状洞穴为研究对象,通过野外实地调查,了解洞穴生长环境,定量统计分析其形态特征,并采集砂岩样品进行显微镜下观察,探讨洞穴形成与盐风化作用的关系。研究表明:蜂窝状洞穴所在的岩性主要为中—细粒长石岩屑砂岩,发育大型高角度交错层理,渗透性较好;洞穴开口均向下朝向锦江,有利于来自锦江河流的湿润水汽较长时间地保持在小洞内部;洞穴开口基本服从泰森多边形分布。因此,碎屑颗粒相对比较均匀的风成砂岩为丹霞山蜂窝状洞穴的发育提供了重要的岩石基础,锦江河流为盐风化提供了必要的湿润水汽和盐分。在初始发育阶段,从岩壁上最适合盐风化作用的若干个点开始形成细小的坑洼,逐步向同层位扩张。单个小洞穴由于盐风化作用,洞穴内部风化速率大于洞穴开口边缘,导致蜂窝状洞穴内部空间扩大较快。然后,蜂窝状洞穴的发育突破纹层的限制,逐步加大、变深而呈泰森多边形规则分布。最终,随着洞穴加深,在重力、风力的影响下,蜂窝状洞穴隔壁减薄失稳,洞穴消亡。     

丹霞风景名胜区的旅游开发研究

本文以丹霞地貌、区域文化开发、景观美学、景观资源的保护和利用、旅游业开发等专题研究及区域旅游发展战略理论研究为基础,与风景旅游规划相结合,研究了自然景观和人文景观、景观资源综合评价和旅游开发总体规划等问题。据此研究成果上报,该风景区已被批准为第二批国家重点风景名胜区。     

四川富顺─南溪地区地貌特征与经济开发的1∶10万TM图像判读

本文利用不同地物在同一波段或相同地物在不同波段具有不同色调的变化规律，来目视判读７幅ｌ∶ｌ０万的ＴＭ黑白和彩色合成图像。通过细致地分析、对比，在富顺─南溪地区判读不同泥沙含量、不同深浅的水体，了解河床中深槽、浅滩地貌，准确勾绘所有大于像元的水体涯线，确定沟谷的宽度和相对深度，查明沟谷成因，划分漫滩和河谷阶地，圈定丘陵和山地的，分布，研究它们的形态和成因，为区域开发奠定科学的基础。     

福建宁化丹霞地貌及特征

福建宁化白垩纪红层盆地位于华夏古陆武夷隆起西南部,地处中亚热带湿润区,自上新世以来,盆地内上白垩统崇安组紫红色巨厚层复成分砾岩、砂砾岩经漫长地质时期流水侵蚀、风化剥蚀、重力崩塌等外力作用缓慢雕塑,发育丹霞崖壁、石堡、石峰、石柱、石墙等正地貌,局部发育线谷、巷谷、峡谷等负地貌,构成一幅老年期丹霞地貌景观,是开展老年期丹霞地貌科研、科考的理想场所.     

质疑粤西北的冰川遗迹

从地貌、沉积物、第四纪地层关系、古气候、古环境等方面论证了广东封开-怀集-带所谓的冰川谷、冰蚀三角面、悬谷、角峰、刃脊、冰半、鼻山尾、冰碛砾石、蛇形丘以及近百万年来发生过3次冰期，是既不符合地学基础理论也不符合野外实际，所以是不确实的，那里没有第四纪冰川遗迹。     

Analysis of spatial relationships among geomorphic,petrographic and structural characteristics of the dartmoor tors

The granite tors of Dartmoor are characterized by using the regional spatial patterns of 21 geomorphic, petrographic, and structural variables. The data were derived from topographic maps, field measurement, and laboratory analysis of rock samples collected in the field. Identification of spatial patterns and comparison of patterns between variables were made on contour maps generated from the data using ARC/INFO. Three tor types—summit tors, valleyside tors, and spur tors—are semiquantitatively characterized using these data and procedures. The three types of tors are distinguished with respect to variations in relative relief, joint spacing and joint type, rock texture, grain size, and composition. Summit tors have the highest relative relief (mean: 125·7 m), contain the most potassium feldspar (>30 per cent), and have the most widely-spaced primary vertical (>300 cm) and secondary horizontal joints (> 10 cm). The rocks are the most megacrystic (> 15 per cent) and the coarsest grained. Plagioclase is also abundant in summit tors. Valleyside tors have the lowest relative relief (mean: 72·9 m) and the most widely-spaced horizontal joints (primary, 60-200 cm; secondary, > 10 cm). Grain size, vertical joint spacing, and quartz and potassium feldspar abundances are intermediate. The shapes of valleyside tors are controlled by horizontal joints and the rocks are either very feebly magcrystic or equigranular in texture. Spur tors have intermediate relative relief (mean: 115·4 m), the narrowest joint spacing (vertical joints, < 200 cm, 50-75 cm; horizontal joints <60 cm, < 10 cm) and the finest grain. In addition, the rocks are feebly magacrystic.