基于连续帧间差分的抛弃式探头三维下沉运动处理方法研究

抛弃式探头由无人机装载,能够在较远目标区域和危险海域开展海洋水文环境剖面参数的测量。通过安装不同传感器,可以实现对温度、盐度的剖面测量,其深度的测量采用数学方法计算得到。针对双摄像机水箱实验获得的5个不同攻角实验结果,分析了常用的运动目标的检测方法,最终选择基于连续帧间差分法,确定探头的三维坐标位置,进而得到探头下沉运动的三维运动轨迹和速度曲线等信息。探头从水面释放后攻角在下沉过程中不断调整,改变运动姿态,同时伴随自身的旋转,抵消水平方向阻力作用,初始攻角产生的深度测量误差主要体现在加速过程,探头达到匀速运动后测量误差不变,在不考虑横流的情况下,探头最后以匀速垂直下落运动。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Characteristics of Spatial and Temporal Variations of Monthly Mean Surface Air Temperature over Qinghai-Tibet Plateau

1 Introduction The Qinghai-Tibet Plateau, known as the highest plateau with the most complex topography in the world, covers an area of more than 200km2, with a mean elevation of more than 4000m a.s.l. (Ye and Gao, 1979). Surrounded by the Earth’s highest mountains, such as the Himalayas, Pamir, Kunlun Mountains, the plateau plays a significant role in climate change in China even in the world, thus attracted great attention of researchers. Up to now, many achievements have been gained by…     

有关边界层问题中一类奇异积分方程新的存在性结果

对边界层理论新结果中出现的一类奇异积分方程w（t）=∫1 t（1-s）（λ＋λs＋s）/w（s）ds＋（1-t）∫t 0s/w（s）ds,t∈（0,1）进行讨论，并得出了上述方程在λ∈（-1/2,0）上正解存在性的新结果。     

地震前后垂直形变场动态演化的量化指标

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。     

BACKGROUND STUDY ON NON-RESIDUAL PHASE OF ELEMENTS IN CHANGJIANG AND HUANGHE ESTUARINE SEDIMENTS

Analysis of Zn, Cu, Pb, Co, Cr, Li, Ni, K, Al, Fe extracted by 1 mol/L HCl or 0.5 mol/LHCl/H_2O_2, showed concentrations of Zn, Cu, Pb, Co, Cr, Fe, Ni were significantly correlated with Li, Al,K, and clay. Two methods are used to indicate the background value of the non-residual phase of elementsin sediments, and are the same as the methods used to indicate the background value of totalconcentrations in sediments. The first method uses correlograms and regression equations,the second usesthe mean element concentrations normalized with grain size. Li, Al, K can be used as reference elements to determine the background value of Zn, Cu, Pb, Co,Cr, Ni, Fe, while the clay concentration's correlation with some extractable concentrations can be used tocalculate the background value of the non-residual phase of elements as a percentage of clay concentrationin the sediments. Based on this study, the concept of using the background value of the non-residualphase of elements to compare the pollution level in differ     

有限元法与伪谱法混合求解弹性波动方程

在地震波场数值模拟中,有限差分法、有限元法和伪谱法都是常用的基本方法,但它们各有不同的适应性和优缺点,如有限差分法、有限元法都存在减弱网格频散和提高计算效率的矛盾,而伪谱法的网格频散小且计算效率高.有限差分法和伪谱法在处理地表结构复杂或地表剧烈起伏以及地下结构复杂的情况时存在较大的难度,而有限元法可较为理想地拟合起伏地表和任意弯曲界面,且可方便地处理自由边界条件和界面边界条件.尝试将有限元法和伪谱法相结合,形成地震波场数值模拟的一种混合方法,利用二者的优点,克服二者的缺点,达到既减弱网格频散又提高计算精度和效率的目的.并采用所谓的‘过度区域‘技术解决两种不同算法的衔接问题.模拟实例表明,给出的混合模拟方法不失为弹性波场数值模拟的一种有效方法.     

抗差估计的初值选择

对L1 范估计的平差值和LS估计的平差值作为抗差估计的初值进行了比较 ,指出在 ρ函数是严凸函数时 ,二者无明显的区别。因为LS估计简单且易于计算 ,因此建议用LS估计的平差值作为抗差估计的初值。     

广西河池地区矿产资源勘查成果展销会情况介绍

１９９５年７月１１日—１２日，广西地矿厅和河池地区行署首次联合举办矿产资源勘查成果展销会，会址设在河池市，与会代表１３０余人。展销会提交大会展销的矿产资源勘查成果３８项，引资勘查项目３８项。经买卖双方三天的洽谈，涉及到的项目２５项，会议期间签订矿产资源勘查成果合同协议４项，愈千万元，取得较好的社会经济效益。为地勘资金多渠道来源开辟了新路子，对促进地勘单位地质找矿工作及勘查成果有偿使用发挥了重要作用     

广西芒场锡多金属矿田稳定同位素组成对矿床成因探讨

笔者曾对广西芒场锡多金属矿田的稳定同位素进行研究。本文根据硫、铅、氢、氧、碳等稳定同位素组成和锶的初始值提供的信息.探讨了矿床成因。并结合矿田矿床地质特征、控矿条件及有关统计参数,参考前人对矿床认识的基础上,修正提出了该矿田混合热液成矿模式,可供类似矿床研究和找矿的参考。